No video

CHEAPEST MINI GAS WELDING SET MAPP PROPANE OXY ACETYLENE KIT GEAR CRAFT JEWELLERY SOLDERING BRAZING

  Рет қаралды 2,732

AndyFireblade

AndyFireblade

Күн бұрын

This is how i made the flame much bigger and more useful. nice little kit.
How Good Is It? with the problem of getting oxy acetylene gas welding bottles, these are a great compromise for amateur hobby use. also see my other videos where i weld with propane instead of acetylene.
WHICH KIT? FREE OXYGEN FOR GAS WELDING. Medical Oxygen machine supplies free oxygen. MAPP GAS PROPANE ACETYLEN OXYGEN.
Weld with Propane and Oxygen, rather than oxy acetylene. Propane gas is easy to get hold of and burns really hot, it is a very similar gas to acetylene.
You can usually find a used set of gas welding gear from around £30 to get you started.
Propane is available at most fuel stations or hardware stores.
The mini gas welding bottles are a cheap and convenient alternative.
paid links:
link to set: ebay.us/k8fUTv amzn.to/3XY1Q5H
link to goggles: amzn.to/3YJiSFM
link to welding wire: amzn.to/3XHVXJB
As an Amazon Associate, I may earn from qualifying purchases
Channel Support:
With the current cost of living crisis we all know how important is is to save money where we can.
My mission is share my knowledge to help and support you to make some real cost saves if possible.
www.buymeacoff...

Пікірлер: 6
@BillyRiff-RAF
@BillyRiff-RAF 2 ай бұрын
Better to use soapy water in a mist spray rathan than sniff test 😊. Nice little torch.
@andyfireblades
@andyfireblades Ай бұрын
Good tip!
@dinosauralan.9486
@dinosauralan.9486 Ай бұрын
Rather than PTFE tape Loctite produce a 567 or 577 sealant, far easier to employ which does not set.
@workshopchrisyt3017
@workshopchrisyt3017 Ай бұрын
Oxygen leaks do matter. Things that normally do not burn very well or easily will burn vigorously in an oxygen-rich environment.
@TheEmbeddedHobbyist
@TheEmbeddedHobbyist Ай бұрын
looks like a rip off of a Smiths little torch. the best thing about using an oxygen concentrators is they do not enrich the oxygen concentration of the room. if anything they reduce the oxygen in the room by burning it faster in the flame. Had a real smiths little torch for years with a concentrator works great, i wonder if the rip offs work as well. for the largest flame a rose bud tip is great if you can keep the oxygen flow rate up.
@steveclark..
@steveclark.. Ай бұрын
Having a gas can sat on the bench whilst you use that torch isn't a good idea surely?
Torch Cutting Basics Everyone Should Know | Oxygen & Acetylene Fuel
26:29
Four Steps to Flawless Wire Joints (How to Solder)
11:45
Will Donaldson
Рет қаралды 210 М.
Алексей Щербаков разнес ВДВшников
00:47
Little brothers couldn't stay calm when they noticed a bin lorry #shorts
00:32
Fabiosa Best Lifehacks
Рет қаралды 18 МЛН
If Barbie came to life! 💝
00:37
Meow-some! Reacts
Рет қаралды 62 МЛН
Which Is Better Solder or Braze? | Pressure Test
14:35
Roger Wakefield Plumbing Education
Рет қаралды 133 М.
Can an 18th Century Battery Charge Your Phone?
15:55
How To Make Everything
Рет қаралды 769 М.
UNDERSTANDING CAPILLARY ATTRACTION WHILE BRAZING - DIY - HOW TO
9:23
The Secret Life Of Gas Springs
24:32
This Old Tony
Рет қаралды 650 М.
Stick  Aluminum Together Without a Welder.
12:32
AM Custom fab
Рет қаралды 1,2 МЛН
Braze Welding Demonstration
7:00
R. Dean Odell
Рет қаралды 53 М.
Do not buy the smith little torch!!!! buy this instead
7:36
Sweetgum NYC
Рет қаралды 35 М.
Chinese Smith Oxy Acetylene/Propane Torch Kit. New Gas Fittings.
28:03
Busting Fake Internet Welds
10:06
The Fabrication Series
Рет қаралды 8 МЛН