Check and Replace ABS Sensor Easily at Home | Ford Fiesta Figo Focus

Check and Replace ABS Sensor Easily at Home | Ford Fiesta Figo Focus | Replace wheel speed sensor

Рет қаралды 45,821

2 жыл бұрын

How to replace a wheel speed sensor or ABS sensor in your car.
::
Model: Ford Figo / Fiesta TDCi
::
Online purchase:
boodmo.com/catalog/part-senso...

Пікірлер: 87

@nigelmiddleton2727 Жыл бұрын

Hi just came across your channel and would like to say thanks for posting your videos, I have learnt so much about job's that need doing on my Ford Fusion tdci, great content 👍👍

@dailyhandsdiy Жыл бұрын

Made my day mate 😊😁

@pvijayasarathy2635 Жыл бұрын

Superb video. I have to appreciate the efforts taken to make such video with background audio. Actually your video speaks for itself. You are highly skilled man.

@dailyhandsdiy Жыл бұрын

Thanks mate..made my day

@pvijayasarathy2635 Жыл бұрын

@@dailyhandsdiy Do you have any workshop? If yes, please share contact details. If not, can you suggest a good and trustworthy workshop/mechanic ok in Bangalore.

@dailyhandsdiy Жыл бұрын

I don't run a commercial workshop, just does if someone comes with an issue. Its in Kerala. Im sry mate, i dont know much about workshops in Bangalore.

@jagadesh92003 2 жыл бұрын

Thank u...Clear and crisp video...

@dailyhandsdiy 2 жыл бұрын

Any time brother..

@kylieates5243 11 ай бұрын

Hi! What do you call that wire that is paired with the one you replaced?

@robertalexandrubaba7065 Жыл бұрын

I was drifting on ice and somehow i ripped the abs cable, speedometer not working, no power sterring, no ESC, engine light on, rough idling, no acceleration and strong vibrations while accelerating, happily i was able to fix it myself. Thanks for the video!

@dillansibanda 4 ай бұрын

Thanks for the comment. just a quick question, after you changed the cable, was there any change to your speedo, power steering, and acceleration. Also did the lights turn off?

@robertalexandrubaba7065 4 ай бұрын

Everything came back to normal, i was driving a ford fiesta 2011 1.6 diesel

@Iamkaif1111 2 жыл бұрын

Nice information 👍bro thnx

@dailyhandsdiy 2 жыл бұрын

Any time bro.

@kuttusooraj1 2 жыл бұрын

Hi, nicely explained , my Fiesta's front sensors are faulty, both left and right, I get a brake warning apart from the abs warning in the dashboard, does this anyway limit the vehicle acceleration or top speed ?

@dailyhandsdiy 2 жыл бұрын

Yes it does reduce the acceleration and if totaly gone, there will not be any acceleration. Jst idles.

@kuttusooraj1 2 жыл бұрын

@@dailyhandsdiy Thanks for the information brother, so time to buy a pair

@dailyhandsdiy 2 жыл бұрын

Yup better do that, link to the same for nline purchase is given in the description.

@nagarajuch5909 2 жыл бұрын

Super

@dailyhandsdiy 2 жыл бұрын

Thanks mate :)

@flaviomendonca1540 Жыл бұрын

Hello sr. i've got a ford figo 2015 and i've got a faulty code p1934 related to speed sensor but the scanner does show which tires is faulty. The car goes limp mode once and awhile. Are the front tires responsible for the speed sensor like you showed in this video? good video though!!

@dailyhandsdiy Жыл бұрын

Hi pls do get the live data from each wheels. Modern scanners can do that. if a sensor is bad you will get deviations in that data. Next thing would be a fault in wiring or connectors. Also do check of the car is equipped with vehicle speed sensor in the transmission.if yes that might give you this fault.

@peterhead4365 Жыл бұрын

Wow

@anishjo85 2 жыл бұрын

Bro can u tell me how to fix oil leak from breather ford figo tdci engine.

@dailyhandsdiy 2 жыл бұрын

Jst put a hose clamp on the pipe which connects to the top of engine.

@suneert.p7205 Жыл бұрын

@dailyhandsdiy8721 Thanks for the video... How to check rear side ABS sensor... In that I can see 4 pins and connected with two side cable...

@dailyhandsdiy Жыл бұрын

Yes its actually for 2 sensors total 4 pins. Could easily check. the pins located diagonally goes to a single sensor.

@lukecleaver7462 2 жыл бұрын

Someone on a ford group I'm in this could damage the sensors, is this true ?I'm tempted to just replace the sensor the scanner said was at fault

@dailyhandsdiy 2 жыл бұрын

Hi there, Din understand wht just said, but when you replace the sensor be sure to check the rubber seal inside the connector. Have seen many cases,these seal wear n water gets inside damaging the sensor.

@robertus3105 2 жыл бұрын

My abs scan for u3000, is it always the abs modul or could be the sensor

@dailyhandsdiy 2 жыл бұрын

This happens usually when there's a wiring damage to module or the module itself. any correlation from sensor sets other code like C1234 or others.

@jubitymakoetlana2648 2 жыл бұрын

Hi my car has a problem when I press the accelerater pedal it shut down, I replaced the MAF and checked timing however the problem persists what could be the problem I do get the ABS light sometimes it is a Ford figo tdci

@dailyhandsdiy 2 жыл бұрын

Hi there, ford does limit power when abs fails but wont stall or shuts down. Pls do check the fuel status of the car ie, fuel filter, fuel pressure ranges and also injector performance too.Also check the air filter.

@user-ik2tp6rr3j 8 ай бұрын

Tengo un Ford focus 2007 dos puertas, las llantas delanteras están frenadas, el mecánico me dice que debo cambiar el dispositivo a donde va conectado el sensor abs de la llanta. Espero haberme explicado

@dailyhandsdiy 2 ай бұрын

Do you mean by knuckle joint.

@blackcountrybloke73 3 ай бұрын

Is this the same for a 2006 ford ka? Speedo and odometer not working. TIA

@dailyhandsdiy 3 ай бұрын

Might be different

@namannakra3361 Жыл бұрын

Hello my Ford Fusion 2008 the tyres in the front stays bent changed the suspension lower arms struts everything still the problem persists and abs and handbrake light stays on.... Can you help?

@dailyhandsdiy Жыл бұрын

Bent? am not sure what you are saying...did you mean extream camber angle. abs n brake light flashes if brake fluid is bad or nearly empty or the abs sensor or coded ring goes bad.

@thomas9434 2 жыл бұрын

Can abs module cause engine system fault on my dash? Ford fiesta

@dailyhandsdiy 2 жыл бұрын

Hi these, ford abs faults usually cause zero acceleration, abs light n brake check light lits up. Wont cause engine malfunction.

@josephprecioso2489 3 ай бұрын

If i reverse the polarity i got the 570 ohms if i reverse again the polarity i got 1 what does it mean?

@dailyhandsdiy 2 ай бұрын

Yup it does that. Thats normal...i guess its cause of single polarity circuit or diode. The other value matters.

@ringbrahma6776 Жыл бұрын

Bro, it would be better if you my mention the price

@cupidabalos7816 Жыл бұрын

Hello sir Left front wheel speed sensor Left rear wheel speed sensor Right rear wheel speed sensor Control module u300049-AB U3000:49 Battery voltage What is the main problem?

@dailyhandsdiy Жыл бұрын

Might be an electrical wiring issue.

@thebanditsix Жыл бұрын

Will an eobd reader tell me which sensor is faulty?

@dailyhandsdiy Жыл бұрын

Its should have abs ebd protocols to read the codes.

@vishnukumark6757 2 жыл бұрын

My car was TATA VISTA TECH VX 2015 MODEL. I feel vibration and steering wheel shaking while hard braking in my car. (Breaking in 80-90 kmh speed). WHAT WILL BE THE PROBLEM? In addition, 1. At the spped of 130-140 kmh, steering wheel shakes. Clearly iam feeling the shake. The shake starts at the speed 120kmh only. 2. Having brand new Neo alloy wheel and michelin Tyre (85% button). These setup in all wheels. Share ur ideas bro?

@dailyhandsdiy 2 жыл бұрын

The one when braking is because of warped up brakes, disks need resurfacing. And the one when speeds abve 120 is not balanced wheels, needs a proper wheel balancing.

@vishnukumark6757 2 жыл бұрын

@@dailyhandsdiy Thank u for the reply bro and for ur valuable time. Warping, can't able to understand. Could u please explain it bro. Did i need any cleaning of breaks... Frontwheel disks and Backwheel Drums. Kindly explain bro. My car was done only 34,890 kms only. Me the 1st owner. Very rare use only.

@dailyhandsdiy 2 жыл бұрын

Sure bro, warping means, when disks heats up certain times the metal deforms and forms bumpy and super polished surface in some areas of rotor or disk. This can happen any time. So, when we brake it slips on affectd area and grabs on other area. This cause vibration on brake pedal and steering. Resurfacing will chip away the top layer of disk and makes it like new.

@vishnukumark6757 2 жыл бұрын

@@dailyhandsdiy Thank u Bro. Did u have done this to ur car? Any videos h having bro, to do it by ourselves. If so share the link bro. Tq. I said to clean the breaks last oil service time. The company charged 800 for break cleaning...

@dailyhandsdiy 2 жыл бұрын

Its not brake cleaning bro, its resurfacing. Its actually not something we can do at home. Need a lathe to do the job. I have done this but you need to remove the rotor and give it to a lathe to get it done.

@santhosh9020 Жыл бұрын

Hello Sir, If ABS sensor not working does it cause hard break pedal?

@dailyhandsdiy Жыл бұрын

ABS won't cause hard brake pedal but if there's a leak in vacuum pipe or if the brake booster is bad, can cause the hard pedal

@santhosh9020 Жыл бұрын

@@dailyhandsdiy mine is 2010 Figo, is it possible to repair booster?

@lenslens7379 2 жыл бұрын

Thanks sir I replaced the sensor but the problem persist... Maybe the ring or teeth??

@dailyhandsdiy 2 жыл бұрын

could be a wiring issue or the magnetic ring can be of fault.

@emrec9308 2 жыл бұрын

Active or passive sensor?

@dailyhandsdiy 2 жыл бұрын

Its an active type.

@khalilzaza8737 Жыл бұрын

P1039 FORD Vehicle Speed Signal Missing or Improper I think speedsensor not good buth i have a mondeo duratec and this car have no speedsensor on the gearbox of speedsensor abs not good why i have nou faulf from abs

@rossmurrayfam1568 2 жыл бұрын

My 2013 ford fiesta Abs cable has snapped when I was driving on a flat tyre

@dailyhandsdiy 2 жыл бұрын

Well thats weird

@rossmurrayfam1568 2 жыл бұрын

@@dailyhandsdiy can this still be fixed

@dailyhandsdiy 2 жыл бұрын

A snapped wire can be fixed. Just strip the wires, slide in a heat shrink, tie the wires and close the repair by heat shrink.For better sealing use some silicon sealant on the repair and heat shrink it. will be waterproof

@sanload123 Жыл бұрын

How do you know if ABS sensor needs to be replaced ? Any indicators

@dailyhandsdiy Жыл бұрын

Yup abs light on the dash stays on.

@saifsiddiqui1053 Жыл бұрын

Part no. Of that sensor

@vaibhavmotghare9318 9 ай бұрын

Bhai price kitna hai ford fiesta abs sensor ka

@dailyhandsdiy 9 ай бұрын

4k plus for one side

@lucasllanza2478 2 жыл бұрын

how much is a ford fiesta abs? my mechanic is charging me for $1,500 for an abs

@dailyhandsdiy 2 жыл бұрын

For the module or for sensor...for sensor i guess its around $100 for a piece. You can even get an aftermarket at lower prices from ebay. If module, its roughly said amount

@lucasllanza2478 2 жыл бұрын

@@dailyhandsdiy Thanks! Much appreciated!!!

@dailyhandsdiy 2 жыл бұрын

Any time mate.

@simogida8303 6 ай бұрын

Que la paix soit sur vous, j’ai un problème avec le compteur de vitesse une fois qu’il sert une fois Makemesh ou Lavishaj Cadran Coulommètres ou Cadran Mazout Kishvio Kelio Ford Fiesta modèle 2007 Mazut

@dailyhandsdiy 2 ай бұрын

Hi, if possible please rephrase to English. Thanks