Ford Focus ABS Fault how to replace rear wheel speed sensor yourself traction control fault mk3

Рет қаралды 25,495

Жыл бұрын

Thank you for watching my video on how to replaced the rear abs sensor on a ford focus mk3 2010-2018 part used listed below
Rear ABS sensor ebay.us/DYoIkT
Please like and subscribe, also please follow me on Instagram or Facebook to keep up to date with what's going on on my channel @ Martys_workshop . If you would like to contribute to help grow this channel please feel free to purchase your very own Marty's Workshop T-shirt at
www.martysworkshop.com/
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting this channel.

Пікірлер: 63

@terencethomas6742 4 ай бұрын

Thank you for this simple to follow video,you explained very well how to replace the sensor and will definitely have a go myself after seeing how it’s done so thanks again

@Martysworkshop 4 ай бұрын

Thank you for your feedback, I always appreciate the support of my channel.

@saqibsandhu1883 Жыл бұрын

It was very easy and straightforward video. Really appreciate for sharing your knowledge. Thank you

@Martysworkshop Жыл бұрын

Thank you for your feedback.

@kierakelly51 Жыл бұрын

Going to try! I’ve had these lights on for months. I was ready to give her up but this gives me hope! Thank you! 🎉😅

@Martysworkshop Жыл бұрын

Thank you for your feedback back, I'm glad my videos could help

@benniethai7829 10 күн бұрын

Very useful video. 🙏🏽

@Martysworkshop 10 күн бұрын

Thank you for watching

@69tads 10 ай бұрын

Thanks for your video, saved a lot of hassle

@Martysworkshop 10 ай бұрын

Thank you for your feedback

@burger_man. Жыл бұрын

Brilliant video Marty!

@Martysworkshop Жыл бұрын

Cheers and thank you for your support

@PHILSWINGIT 9 ай бұрын

nice vid thanks for the info

@Martysworkshop 9 ай бұрын

Thank you for your feedback

@Mike-Gor Ай бұрын

Thanks from Russia 😉🛠

@Martysworkshop Ай бұрын

Thank you for watching

@Martysworkshop Ай бұрын

Thank you for watching

@Lee_Hall Күн бұрын

Replaced my RL ABS sensor this evening, but sadly the ABS and traction control lights are still on along with the warnings about hill start and city stop. I fear the problem might be else where i.e. broken wire or dodgy connection somewhere on mine. Accessing that torx screw was bit of a pain, trying to see what you are doing and finding a angle to get the screw driver in.

@Martysworkshop Күн бұрын

Thank you for your input

@julianhill-boxedpixels4580 9 ай бұрын

Thanks Marty good to know its an easy enough fix. Is it safe to drive with both these lights on as cant get to the garage for 5 days or so.

@Martysworkshop 9 ай бұрын

Only thing it efects is you traction control and abs won't work, the brakes will revert to standard braking

@37rowan 3 ай бұрын

Thanks for that my car fix 👍🏻just have a question my Front brakes are my a howling sound after hard Breaking and then taking off I hear the noise again have ya ever have that problem?

@Martysworkshop 3 ай бұрын

It could be the pads sticking in the carrier, I would take them apart and cheak it is all free

@37rowan 3 ай бұрын

@@Martysworkshop thx will give it a go 👍🏻

@dt1607 Ай бұрын

I have the same issue. Also message for Hill start assist and active city stop. Do you think they are all connected? ie same sensor fault. Thanks

@Martysworkshop Ай бұрын

Yes all them systems are controlled by the abs

@AlfieCavapoo 28 күн бұрын

My MK3 has the ABS light, no stop start and speedometer not working now. It's the same problem?

@Martysworkshop 28 күн бұрын

I'm not sure sorry

@psychedelic471 Жыл бұрын

i have a problem on my ford focus mk3 i changed the abs sensor on the rear wheel and still i have the abs and esp and tire warning light on the screens after they told me to change the cable abs which matches the wheel sensor with the bottom of the car but still the same problem with the lights on the dashboard do you have an idea or a solution to my problem thank you

@Martysworkshop Жыл бұрын

You need to read the dtc in the abs module was it a voltage code? Or a tone ring code? It could be the tone ring built into the wheel bearing.

@psychedelic471 Жыл бұрын

@@Martysworkshop I packed it is noted U0415:00 ODDTCs received invalid data from ABS control module (A) Thank you

@jonathanwood6522 Жыл бұрын

What is the price range of a fix like this on 2010 Ford Focus?

@Martysworkshop Жыл бұрын

Well the sensors is around £20 for the sensor (link in description) then Labour in mu area is around £50 an hour so no more than an hour to replace, and some garages charge a plug in fee for the diagnostic whitch can cost anything up to £50, so no around £100 -£150 depending on garages I guess. Hope this helps

@gomezk9796 Жыл бұрын

Marty I need some help with my Lt50 quad, could you help me please and thank you

@Martysworkshop Жыл бұрын

Sure what's the problem?

@gomezk9796 Жыл бұрын

I need to send you a photo for you to get a better understanding

@Martysworkshop Жыл бұрын

Sure my email is martindando34@hotmail.co.uk

@ZhinoZ Жыл бұрын

on my ST 2013, i have the issue with the odometer it does not shows the speed, only works the RPM, any idea how to fix it??

@Martysworkshop Жыл бұрын

Is the abs light on?

@ZhinoZ Жыл бұрын

@@Martysworkshop no, the only light that is on is for the catalytic sensor.

@Martysworkshop Жыл бұрын

Not sure then sorry would need to be plugged in

@memeprez1281 Жыл бұрын

@@Martysworkshopsame with my 2017 se focus my abs is along with traction control

@bobjit252 26 күн бұрын

Yeah the other side not so easy as there is no hole you can look through , but that’s the thing every one on you tube always does the easy side 😂

@Martysworkshop 26 күн бұрын

True, thank you for watching

@AT-ww6pj Жыл бұрын

I did mine and the bolt snapped in the hole :(

@Martysworkshop Жыл бұрын

Ow did you have any luck getting it out?

@bikercamper8714 10 ай бұрын

He must not have 😂

@corymerry3399 3 ай бұрын

My abs lights and traction lights came on one day. So I watch this video and think I figure it out. After replacing both rear wheel sensors the lights are still on and now the red brake light it on. Idk what to do. Lol maybe I'll replace the fronts and see what happens

@Martysworkshop 3 ай бұрын

Yea probably the front

@corymerry3399 18 күн бұрын

@@Martysworkshopso I replaced all the sensors front and back. Still abs lights. Bought an abs scan tool and it says it's the rear l and r. I had the old ones put them in and still says the rear. I'm going to order oem ones and see if this changes it. I'll update

@Martysworkshop 17 күн бұрын

Please let me know how you get on

@corymerry3399 17 күн бұрын

@@Martysworkshop So I have an update! The local parts store sold me the Grey wheel sensors. My model is the 1.0l Se w/o parking assist. My car came with black sensors oem. I went back to the parts store and purchased 2 black wheel sensors and took out the Grey ones and bam! No more ABS lights!!! Make sure to see if your model can use the Grey sensors for parking assist or black sensors for non parking assist.

@oldxoul Жыл бұрын

i have the abs, traction and my mph not working

@Martysworkshop Жыл бұрын

Then you have a wheel speed fault

@oldxoul Жыл бұрын

@@Martysworkshop i changed the sensor and still the same thing 🤦🏽‍♂️i recycled the key too. no codes

@Martysworkshop Жыл бұрын

Did you drive it far after?

@oldxoul Жыл бұрын

@@Martysworkshop about 10 miles

@Martysworkshop Жыл бұрын

That's more than enough, so what scanner are you using? Does it have live data? You would need to pull up the 4 wheel speeds on a graph and drive the car then compare the signals, if 1 is missing or all over the place then that is your problem area, it could also be the pickup ring witch is ether in the wheel bearing or mounted on the hub