Check Engine P0456 2011 - 2018 Explorer Replace Purge Valve

Рет қаралды 132,309

6 жыл бұрын

This video demonstrates the 2 main causes for the Check Engine code P0456. This is using the 5th generation Ford Explorer. (Sorry for poor lighting in Engine, but you get the idea).
This code is for a small EVAP leak. We look at cause 1 (gas cap) and cause 2 (purge valve canister) and how to diagnose and fix each.

Пікірлер: 67

@melissadaley9539 25 күн бұрын

Thanks for posting this video. Heading outside now to check the purge valve!

@warrennolasco2700 4 жыл бұрын

After watching your video, it took me 5 minutes to fix the issue. Thanks!

@ronwalters9527 5 жыл бұрын

Thank you for this video, check engine light went out as soon as I replaced the purge valve. Three minutes to fix.

@realrickrichards 6 жыл бұрын

Very good step-by-step information! This solved my issue exactly as described.

@visa1979 Жыл бұрын

Thank you! I thought replacing it will be hard. Appreciate you taking the time to put it on video.

@M0ren090 5 жыл бұрын

Awesome! Thanks for the video. Kind of got dizzy with the camera movement but the content was extremely helpful.

@ponchyah2517 5 жыл бұрын

Thank you, sure made it clear and including where to purchase.

@dsopala 4 жыл бұрын

Dude! you are my favorite person right now! Saved me time and money. I'm giving you a sub!

@danielmarinholcombes73 3 жыл бұрын

Thank you for the video. It was very helpful.

@Movieman1965 3 жыл бұрын

After first replacing the ignition coils and spark plugs, which the plugs were in really bad shape, I still had rough idle and engine shudder at 40-45mph! Then this video recommended to change the purge valve out. Well, I replaced the evap purge valve. Guess what? It actually eliminated the rough idling AND the engine shudder!!! For the past few days the car has been running exceptionally smooth! BTW, I decided that since it has 126,000 miles now, might as well replace the Throttle Body. Well, I changed that too and now the acceleration response is way better! Next I'll replace all the fuel injectors because one of the codes was Cylinder 1 fuel injection fault. Then, I'm going to inspect all the vacuum lines and anything like hardened rubber hoses or brittle plastic tubing is also getting replaced! This car is going to my daughter as her first vehicle. I don't want her to have any auto problems!!! Have a great day!

@phriz7774 2 жыл бұрын

Hell yea man its just like Dominic Torreto says a car can last you forever as long as you take care of it like family

@Movieman1965 2 жыл бұрын

Well, it turns out that my daughter is in school in Boston so she WILL NOT need this car (excellent subway system). Even better! One less thing for me to worry about. One less expense too!! On another note. The car has been performing better since all the replacement work. I don't know if I had said this before but after changing the ambient air temp sensor the AC is wroking well again. This is the sensor that is mounted on the front of the vehicle bottm left side behind the plastic grille. Anyway, if this sensor malfunctions it will display erroneous outside air temps causing the AC to not operate correctly. Ok, that's it for now. The car now has 139,000 miles. Have a great day.

@angelabristow9322 4 жыл бұрын

Awesome video! Thanks for sharing

@zippyscott3900 6 жыл бұрын

Thanks nice video I needed this

@01157929 5 жыл бұрын

Thanks for sharing, you save me a trip to the dealer,!!!

@jonathanjuarez6413 6 жыл бұрын

Gracias amigo I save money with your video

@Danyheli1 6 жыл бұрын

Thanks bro...very nice

@andrewhart2747 3 жыл бұрын

Great video thanks!

@joleneweaver7578 3 жыл бұрын

Thank you

@sukikuri5360 5 жыл бұрын

Nice. Well explain ...Need a camera lighting assistant....lol. Thanks

@jasons5704 6 жыл бұрын

If your getting codes and also having trouble starting and maybe a rough idle. It’s the purge valve

@josephalsheimer9866 Жыл бұрын

Thanks great video. Have you had any problem with the door panels peeling up.

@MM-ej3df 3 жыл бұрын

I have a 2013 Ford Explorer XLT I’m getting the P0457 code. How can I fix this?

@lotus956 4 жыл бұрын

Good video. Just need more light.

@warrenmull10 3 жыл бұрын

My friends 2012 Explorer has P0196 and P0198 which are rich codes and it also stalls after getting gas could this be the purge valve causing the problem since it isnrelated to gas vapors? It idles rough as well

@Movieman1965 3 жыл бұрын

Ha! hard starting after filling from almost empty! I also have this problem. It takes a lot for the engine to start when filling from EMPTY. If the car has, say half a tank, it doesn't happen. If it has a quarter tank it doesn't happen. BUT, whenever I fill up from almost empty, it ALWAYS has starting problems!!! I have not reached empty yet after this purge valve replacement. When I do I will check for this problem. I will update this thread so everyone here can know if this is the culprit for the hard starting also. Have a great day!

@keep1treal61 2 жыл бұрын

Would like to know as well thanks

@Puronica32 4 жыл бұрын

I’m having hesitation when accelerating. I’m replaced spark plugs and ignition coils and still having the symptom. I have no DTC codes and when I tried blowing into the purge valve I do have some air going through not closed. Any thoughts or feedback would be gtreat.

@millistechnology 4 жыл бұрын

Jose Ulloa, I’ve not experienced this. You might try reaching out to another KZfaqr named “ford tech makuloco.”

@Movieman1965 3 жыл бұрын

This is the same I did! Still has the problem! BUT, after changing the evap purge valve it eliminated the rough idling, engine shudder at 40-45mph, AND the engine ran very smooth after this was done. It's worth trying since the part is only $25 on Amazon. Have a great day!

@jlozano180 3 жыл бұрын

How many miles do you have?

@deweyfisher5117 5 жыл бұрын

You need some lights when you record the dark engine bay dude.

@DGR33 6 жыл бұрын

I have a 2013 Edge 2.0 turbo and it does not have a purge valve. It has a vapor canister solenoid valve which is a valve with a few hoses permanently attached. You have to buy the whole assembly and from the dealer it's about $140. These valves also regularly fail as well.

@warrenmull10 3 жыл бұрын

I never want a car with a turbo that is probably why it is like that

@Movieman1965 3 жыл бұрын

DON"T BUY from the dealer if you can help! I had to replace an A/C Pressure Switch because my AC compressor was not latching the compressor clutch to run the ac. The auto shop tried to tell me that the part is $100 and labor to replace was another $100!!!! Out of their minds!!! Actually, the part cost me $20. Installing it took 3 minutes!!! Thieves and deceitful people!!!

@marthahernandez2254 Жыл бұрын

I have the question is the same P0455 I hope you can answer please

@mwa1252 6 жыл бұрын

Thanks! One thing though... I can't see anything in your engine compartment. Maybe shine a light in there next time.

@frankmillerjr7631 5 жыл бұрын

if you dont reset the code will it do it automatically ?

@millistechnology 5 жыл бұрын

Frank Miller - it should turn itself off within 100 miles. If you don’t have a code reader, you can remove the battery leads for a few minutes. Also, most chain auto parts stores have a code reader you can use to clear the code.

@frankmillerjr7631 5 жыл бұрын

@@millistechnology thanks for the information

@luishernandezsantoni8802 5 жыл бұрын

Good mornings. Thanks brother ...no Ingles soy de Venezuela mi camioneta ford explorer 2012 al colocar gasolina la camioneta demora para prender una ayuda??? Please.

@millistechnology 5 жыл бұрын

Hola. Después de agregar gasolina, espere 50-100 kilómetros. La luz se apagaría si se trata de la tapa de gas.

@luishernandezsantoni8802 5 жыл бұрын

Muchas gracias..

@johnnyflores1978 Жыл бұрын

Had to replace it twice since the other one i bought was faulty

@totljag1 5 жыл бұрын

Is this a 4 cyl ?

@warrenmull10 3 жыл бұрын

It looks like a 3.5 V6

@samo0golf 2 жыл бұрын

Watched the video twice and still didnt know where its located

@vstravis 6 жыл бұрын

I like the wife beater.

@SWResto 5 жыл бұрын

Purge valve fixes po1450 code also

@warrenmull10 3 жыл бұрын

Will it fix P0196 and P0198 rich codes with stalling after fill ups?

@Movieman1965 3 жыл бұрын

@@warrenmull10 I'll let you know soon. I have changed it out and is has eliminated rough idling, engine shudder at 40-45 mph and now the engine is idling very smoothly. Once I get close to EMPTY I will check for the hard starting after a fill up and report back here on this thread! Have a great day!

@keep1treal61 2 жыл бұрын

@@Movieman1965 I’d like to know as well thank you

@hayden7525 2 жыл бұрын

Found On Roadside Dead Ford

@timothycarroll1059 4 жыл бұрын

They got rid of the cap because to many people didn't put there cap on right

@warrenmull10 3 жыл бұрын

I think so too lmao

@timothycarroll1059 3 жыл бұрын

@@warrenmull10 it would set an evap code

@thekehoeshow.. 4 жыл бұрын

Lol my 1985 GMC truck is full of metric nuts and bolts. Nothing new. And let's all be honest (proud American male here), metric is way easier than standard.

@Movieman1965 3 жыл бұрын

It is. I have messed with both SAE and Metric and Metric really is a better measuring system. I was very resistant to change when I was younger but now I do welcome the metric system. It's logical, easy to convert units up or down, just move the decimal point!!! Unfortunately can't say the same for SAE units! Have a great day!

@Jhoffpauir67 4 жыл бұрын

Ford wanted to charge me $1000 to change this

@warrenmull10 3 жыл бұрын

Oh hell no lol

@Movieman1965 3 жыл бұрын

Total rip off! I can tell you this. My nephew once worked as a "service advisor" at a dealership. He told me that the standing order from management is to recommend as much replacements, flushing, etc. To every single customer regardless to maximize profits!!! So, beware of the dealerships. They are not in business to help you as much as to help themselves!!!