Ford Fusion Very Small EVAP Leak P0456

Рет қаралды 210,917

5 жыл бұрын

In this video I have a look at a 2012 Ford Fusion that is throwing a code P0456 Very Small EVAP Leak. We know one thing for sure it is not the gas cap because it doesn't have one!? Orrrr is it.... -Enjoy!
OTC 6522 LeakTamer EVAP Smoke Diagnostic Machine: amzn.to/2WJvvEZ
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 743

@robertbiggs4934 5 жыл бұрын

Growing up I had a capless filler neck. Usually just stuffed a rag in it. Didn't realize I was ahead of my time!

@roadkill5333 5 жыл бұрын

A rag in place of the cap?? We refer to those as fuses, or Molotov cocktails!! :)

@throttlebottle5906 5 жыл бұрын

LOL at both ya'll comments, I always kept caps that worked...........

@SmittySmithsonite 5 жыл бұрын

HA! Brought back memories, Robert! People would always ask me why I had a rag sticking out from behind my rear license plate on the ol' '85 Monte Carlo.😂

@davidnull5590 5 жыл бұрын

Molotov cocktail? His name was Vyacheslav Molotov, or "Hammer", he was the Soviet Minister of Foreign Affairs (1939-1949), not a nice guy. In 1939-1940 the gracious Soviet Union invaded Finland. During the Soviet invasion invasion Molotov claimed the Soviet Union was not dropping bombs on Finland, but merely airlifting food to starving Finns. The Finns were not starving, and they dubbed the Soviet cluster bombs "Molotov's bread basket." The Finns also named the improvised incendiary device that they used to counter Soviet tanks, commonly known as the Molotov cocktail, "a drink to go with the food." Thank you Comrade Molotov! In 1942 Molotov started and headed the Soviet atomic bomb building program in competition with the Manhattan Project. We have Comrade Molotov to thank for the beginnings of Soviet nuclear weapons and that darling Cold War.

@westsidetz1415 3 жыл бұрын

@anthonyvega1959 5 жыл бұрын

Damn Eric, you took advantage of her car

@roadkill5333 5 жыл бұрын

I had to smoke a cigarette, after this one!!

@anthonyvega1959 5 жыл бұрын

@@gilbertfranklin1537 at least he used lube. Lol

@kevinwoodcock7578 5 жыл бұрын

@@roadkill5333 LMAO

@anthonyvega1959 5 жыл бұрын

@@roadkill5333 I can't look at my car in the same fashion anymore when I fill it up with fuel

@jaredstrehlein5605 5 жыл бұрын

Damn right he did

@Eremon1 5 жыл бұрын

6:38 After that poking Eric gave the old Fusion, no wonder it feels the need to smoke. lol

@TeemarkConvair 5 жыл бұрын

LOL~~~ bye bye PG

@Fsilone 5 жыл бұрын

Well, he did say it was his nickname in high school.

@krisdrinkwine238 4 жыл бұрын

😂😂😂

@cratecruncher6687 5 жыл бұрын

Gas cap's missing. That's your problem lady.

@troyfordguy1345 5 жыл бұрын

Pro-tip: To prevent this on ALL Ford vehicles equipped with the Capless fuel filler work the gas pump filler gun in and out a few times after you fill up, this will clear any debris holding the door open. Also use compressed air or canned air if you don't have a compressor to blow out the entrance to the filler once every few months or when you wash your car. I have a 2012 Fusion and have never had an EVAP issue with it.

@cowfrank 5 жыл бұрын

The cap-less gas tank, the answer to a question no one is asking.

@froggy0162 3 жыл бұрын

My Renault has one and I like it. Every time I drive a “normal” one (such as on my partners Alfa Romeo) the cap seems very old fashioned and fiddly... The Renault design is more of an actual flap and can’t get crap in it like that ....

@sylvester3018 2 жыл бұрын

It’s like the concept of turning a cap and pulling it out was too hard for people to understand

@daverocker1 Жыл бұрын

On the contrary...it did answer the question of "...what else can we over engineer so we still seem useful to justify our paychecks...."

@jimmyfavereau Жыл бұрын

lets design it so as the tank vacuum increases, the seal is less likely to seal.. CMON MAN! : )

@benjaminhadley78 10 ай бұрын

Seriously lol

@1013redoak 5 жыл бұрын

I love how you try and save your customers some money whenever possible! A rare honest and compassionate mechanic these days!

@beepbeepcoyote 5 жыл бұрын

I think the real solution to this is replacing the filler neck with one that comes with a screw on cap.

@KingRatt 3 жыл бұрын

Also my suggestion.

@spelunkerd 5 жыл бұрын

Love that discussion with the customer, and the way you offer explanation and choice. Some professionals seem to tick the box with the highest cost, in the self interest of fewer callbacks.

@MrGardman 5 жыл бұрын

I love it when the smoke machine fires up.

@erg0centric 5 жыл бұрын

I am VERY disappointed that a Ford Fusion runs on gasoline rather than deuterium. False advertising.

@roadkill5333 5 жыл бұрын

It would only work with 1.21jigawatz!!

@thebeetalls 5 жыл бұрын

You must've been thinking of the Ford Fission. Understandable.

@bdrrogers 5 жыл бұрын

@@thebeetalls Nah, the Fission runs on Plutonium or U235

@throttlebottle5906 5 жыл бұрын

failed fusion? :))

@TheImprobableIronman 5 жыл бұрын

Love your humour Eric - The One Handed Wonder, that's what they used to call me in High School. Quality. Thanks for another great video.

@Fsilone 5 жыл бұрын

As he proceeds to ram that funnel into the car repeatedly. Surprised he didn't use two fingers while he was at it.

@lonwillis783 5 жыл бұрын

Wow jiggle fix good job! I loved this tip thanks! Great Job as always take care.

@jeffryblackmon4846 5 жыл бұрын

Those 20 Amp battery maintainers are a nice addition to your tool box. I enjoyed the video.

@chrisadrian5404 5 жыл бұрын

Great video. I own a 2012 Ford Fusion SEL andnd I purchased a fuel plug and it helps keep the fuel port clean. Also, when washing the car it helps to wash the area inside fuel door which helps to cut down on dirt accumulation.

@charger19691 5 жыл бұрын

I’m really enjoying this channel since I subscribed. You are a excellent mechanic and diagnostician!

@MrJobforacowboy00 5 жыл бұрын

Danny Rumbles you won’t be disappointed! Eric is a master mechanic and a even better human!

@andylucas8262 5 жыл бұрын

That capless fuel system ranks right up there with the sealed transmission ( no dipstick ).

@iknoudo 2 жыл бұрын

YAAASS!! I looked for HOURS in my car for the dipstick to my transmission fluid... I never found it.

@holidayhouse03 5 жыл бұрын

My wife used to loose the gas cap ALL THE TIME. So I started buying every gas cap off every Volvo redblock that came through the junkyard...12 gas caps and many years later she hasn't lost a single one.

@zMeul 5 жыл бұрын

my Skoda has o noose tied to the fill neck and cap

@berlinbadger6725 5 жыл бұрын

Ah, South Main Auto, come for the automotive expertise, stay for the commentary. Another great video, thanks Eric!

@quiktv1587 5 жыл бұрын

This was a fun one, keep it up man. Love the videos.

@mattrose2413 5 жыл бұрын

Nothing like Funnel Banging the car for a fix! good job Eric.

@hammerhead6537 5 жыл бұрын

Great to be back in class this morning! Thanks.

@felixrosa241 5 жыл бұрын

Yesssss! A video of the lift install would be cool to see, as some else mentioned on here. Great video though, didn't think those seals would rejuvenate themselves with a little spray of fluid film, WD-40 etc.👍🏼

@mikechiodetti6737 5 жыл бұрын

You know it's coming back. Even in Southern Cal, the guys where I used to work replaced them. I like temperary fix.

@Yawwee 5 жыл бұрын

I have a Buick Envision, 2018, with this kind of fuel filler gizmo, so I will be sure to keep and ear to the filler neck opening and listen for noise leaks - VERY informative video, I learned something very valuable today, from the imaginary "" Rust Belt "" Avoca, NY area, South Main Auto garage - Thanks, Eric !!!!!!

@dogguy2012 5 жыл бұрын

love it. got one of those dopey capless fillers on my jeep grand cher-Rockee and what a pain. it had broken at 75K miles. nuts!

@davidstiles8884 5 жыл бұрын

Ford has a new design for the cap less system and also make sure the spring for the fuel door is keeping the door shut tight. Great videos.

@AIRJAC33 5 жыл бұрын

Can’t wait for Ford’s Hoodless Engine System in 2020.

@orig66Super 3 жыл бұрын

G JACKSON I've been reading in the trade magazines about a wheel-less tire for 2021.

@simonstork9404 2 жыл бұрын

The motorless Automobile is where it’s at…the future is almost here..

@nigelstringfellow5187 5 жыл бұрын

Another excellent and informative SMA video,thanks Eric ,sending big cheers from downunder.

@twopumpsandimdone309 5 жыл бұрын

At my office job today....customer walks in at 6:40 and hears “oh baby”. I pressed that pause button so fast....

@jaredstrehlein5605 5 жыл бұрын

customer says " what the h%ll you watching"

@PeterBranco 5 жыл бұрын

@@jaredstrehlein5605 South Main Auto. Lol....That is what I'm watching.

@Fsilone 5 жыл бұрын

"Watching this guy give a car the dildoing of its life."

@orig66Super 3 жыл бұрын

Busted!

@Themaedsredsox 5 жыл бұрын

There is nothing like waking up to a new South Main Auto video

@misterhat5823 5 жыл бұрын

That's South Mian to you!

@KevinCoop1 5 жыл бұрын

This comment has nothing to do with this video. My sons 2003 Silverado 277K miles would not start. I found your video "Chevy truck no start no crank" it is amazing how many things can cause the problem. For some reason it was intermittent. After watching your video, we new exactly step by step what to check for correct issue and since it was the starter, exactly how to change it. Thank you so much for your videos! I subscribed! Respectfully, Kevin

@HowNotToDoEverything 5 жыл бұрын

We'd love to see the new lift when it's installed.

@spaceinvadertoo 5 жыл бұрын

Cup of coffee and a new SMA video. Fine start to the morning.

@mikerobbins5049 2 жыл бұрын

I’ve had my doubts about those cap less fuel filler systems every since they started using them... Glad to see how to do a quick fix/clean on them

@jeffwade6085 5 жыл бұрын

Good morning Eric. I'm glad to hear you say this is only temporary. There are to many hacks out there that would call this success. Keep up with the cool video's !

@pocketdimes1048 5 жыл бұрын

I don’t even watch for repairs anymore. I’m just here for Eric O’s one liners. Comedy gold. 😂

@arthurpatino8420 5 жыл бұрын

Due to arthritis, my hands lost the ability to remove the fuel cap and some vehicles (Ram 1500) I can’t get my hand to the cap, so the capless fuel system is a god send. I live in Florida and I have not noticed any debris build up. Eric, thank you for sharing with me that there are videos that show how to maintain the capless system.

@Twin_Flyer 5 жыл бұрын

You were having too much fun with that emergency funnel!!

@phprofYT 5 жыл бұрын

I have a diesel with a cap-less fuel filler. I found and purchased a fuel cap.

@Paul1958R 5 жыл бұрын

Eric, Great fix and video. And great explanation/logic of why its only a temporary fix - I agree with your reasoning 100 percent. SMA#1 God bless Paul

@ckeller07 5 жыл бұрын

The explanation was good. For my car I know what my fix would be :)

@garyrichards407 5 жыл бұрын

This is good information for us to have. Thanks for all the information you give us.

@MrSilence99 5 жыл бұрын

I actually appreciate the capless system when it's cold. All three of my previous cars had the caps get jammed so bad I couldn't get them off at times.

@jerrypeal653 5 жыл бұрын

I know you said boring video but it helps a lot of us out because evap. Leaks are common so testing different components is nice to see .

@davidd8435 5 жыл бұрын

Thanks for another great video, it’s too bad all makes of vehicles have “ common” problems. I think the engineer that designed the cap less fuel filler system immediately received a promotion.

@jeffjankiewicz5100 5 жыл бұрын

Coffee and a SMA upload...great way to start my day!...Wiggling the jiggly bits on a ford...not a sponsor. I think I can hear the ocean!...lol

@Torsee 5 жыл бұрын

Thanks for the guffaw! That's what they called me in high school! 😂

@adamjones2025 5 жыл бұрын

Well loved that humor, great job Eric

@63256325N 5 жыл бұрын

Can't agree with you more on the capless system. In a perfectly clean world they'd probably be fine but the world ain't clean. Thanks for the video.

@marcinmorris 5 жыл бұрын

"It's already 7 yo" :D I wish I get such "old" car ;) Good job Eric as always :)

@jp9579 5 жыл бұрын

Marcin Wojciechowski its new england. Cars are lucky to make it 10 yrs. they rot and are entirely shot from poor roads

@wyattoneable 5 жыл бұрын

I already miss the gas filler cap. When I first started driving they were metal and not attached with a cord. You had to remember to put it back on when finished. NAPA sold a lot of caps. :)

@garypoisson4173 5 жыл бұрын

Had an old '74 Honda Civic like that, with a filler door. Stopped for gas on a road trip and put the cap on the rear bumper trim panel. Filled up, closed the door and moved on. 350 miles later stopped for gas again, and uh-oh - no gas cap behind the filler door. However it was still sitting on the bumper trim panel. Somehow it stayed there without falling off for 350 miles.

@thehappytexan 5 жыл бұрын

It’s not a salt belt thing. Fixed my wife’s the same way and it’s been in Texas it’s whole life. I used a screwdriver to hold it open and clean/condition the rubber with silicone spray. Then hit with the funnel like you did. There’s an anti theft cap for these to seal off dirt, but you can also use a ford ranger upper tube with a cap and adapt it to the car.

@navigatorx1013 5 жыл бұрын

Tee arrived. Nice shirt. Thx. Gotta love those fuel-less fuel systems.

@metoon3092 5 жыл бұрын

Good video, short but interesting. I cannot imagine your daily routine, Family Guy, Top notch Mechanic and Business owner to name a few. I appreciate the video's and applaud your demeanor, humor and the true learning experience that you provide, Buy Mrs. O some Roses,....she is a Big part of who You are! -Viewer from Indianapolis.

@jmcenterprises9591 5 жыл бұрын

Filler neck job is a pain without a lift. Thanks Eric for the vid, just might save alot of work.

@jormassi 5 жыл бұрын

I love these videos and the vaping reference

@elloellogamingpeahen 5 жыл бұрын

You legend another good video of you thrusting plastic parts into holes :)

@thebeetalls 5 жыл бұрын

I haven't had any trouble with my 2014 focus' or 2011 Taurus' capless system, probably because when I noticed it was getting difficult to insert the filler funnel(I use fuel system cleaners occasionally) I sprayed the system down with lube and gave it a good funneling. On a different but related note, the hinge that holds the fuel door popped out if its socket and I had to spend an hour pulling carpet and foam out of my trunk and reaching into a blind hole just to get the damn door assembly off, then screw and super glue the hinge pin in place. The whole thing was made of plastic of course. Why they couldn't they just put the door on with a few screws accessible from outside of the car?

@MegaThunder70 5 жыл бұрын

I had the same exact problem a couple of years ago and carried it to the Ford dealer they ended up replacing the filler neck and after that it was fine. I was told those things are notorious for going bad.

@notchback93 5 жыл бұрын

I worked for ford as a tech from 2001-2016 and thought the cap less system was totally not needed! Have had a ton of issues with those necks!! Then 2 years ago I purchased a 2015 f150 that has a cap less neck and I hate to admit that I actually really like it

@Sheeeeeeeeeeeeiiitt 3 жыл бұрын

Aside from cleaning and replacing the filler neck have you come across any diy gasket or plugs to help seal the system? My 09 F150 P0442. Thanks for any feedback.

@notchback93 3 жыл бұрын

@@Sheeeeeeeeeeeeiiitt hey brother in my experience your code p0442 could be caused by multiple things inside of your evap system, cleaning the cap less neck is just the most common and least expensive thing to attack first unfortunately if that didn’t solve the issue the next step is to have the system smoke tested to determine where your leak is, there are other components that fail in that system but any of those would just be a guess on my part. Hope this helps you.

@Sheeeeeeeeeeeeiiitt 3 жыл бұрын

@@notchback93 thanks so much for replying. Gonna do as you suggest abs smoke test…make sense as it will save me money and time.

@benjaminstockton3917 5 жыл бұрын

Nice video Eric O. I had to rewind the video a couple of times you almost made me pass out by laughing so hard thanks for video's

@chrisadrian5404 4 жыл бұрын

Mr. O says that the 2010 Fusion will be in the crusher at 14 years...I have a 2012 Fusion and hope I can get 14+ years out of it. I love this car and want it to last as long as possible!!

@TheCowgirlNiamh 5 жыл бұрын

Another fine job Eric! Bet that car was happy going home 👍😂😂

@grahamefreestone5309 5 жыл бұрын

Happy ending. Lol.

@fargenvonwitbier 4 жыл бұрын

Purge solenoids are incredibly common on these 2.5s (and alot of newer Fords mostly the 3.5 and 3.7 ) too, I thought for sure you'd end up finding it to be sticking open.

@rrmech11 5 жыл бұрын

Excellent video Dr.0 Love the jokes as always. SHAMOKE IT. I think you got over excited with the emergency funnel. Almost got a Triple XXX rating from Siskel and Ebert. 😲😲

@stevenmotchan2048 5 жыл бұрын

I thought it was "the mystery goo in the trunk" that tipped the censors.

@BigEightiesNewWave 5 жыл бұрын

My Focus 2002 ZX3 manual had a similar code.Friend with dealer level scanner/50 yrs. experience diagnosed it. Went to yard got used Purge Valve for $11 fixed !

@bulldogsv2 4 жыл бұрын

Same problem for the same car. It should have been a recall (one of many) for this model. Tried the one handed method, and it worked - until next time you got gas. I replaced all 4 feet of the fuel filler neck, since you can't just replace the flap assembly. Later models had an exterior door flap that closed with magnets and kept the dirt out (you are right about this being a N. E. geographical problem). Now find a 2012 Fusion with intermittent air conditioning PROBLEM (blows hot as a heater, and then it's fine). Fix Or Repair Daily.

@boomersudden6257 5 жыл бұрын

Great video Eric thanks for sharing.

@mikeeustice4452 5 жыл бұрын

That gives a new definition of showing it some love😁😁😁

@AutoAuctionRebuilds 5 жыл бұрын

Nice fix!

@donnierobertson3088 5 жыл бұрын

Great job again like always A+

@leedress2187 5 жыл бұрын

I clean mine every couple of months or so. a can or carb cleaner, and that nozzle thing same way you did. then a little silicone lube spray... just to keep the seal soft..

@tdhodroid 5 жыл бұрын

Great vidjeo. I'd like to see a filler neck replacement too.

@hershysoropeza4620 2 ай бұрын

I want to see that too 👍🏼

@chriskatanic8080 5 жыл бұрын

I was told that capless filler necks are to reduce fuel vapors escaping to the atmosphere when refueling. Every time you take the cap off or remove the filler nozzle the vapors escape. With this design the vapors are captured by the gas pump nozzle and it seals quicker when you remove the nozzle. I assume that all filler necks will eventually use this design. Hopefully manufacturers improve the design!

@cruisepix 5 жыл бұрын

A hunerd years ago I use to have a box on top of the gas pump with all the gas caps for all the caps I found ON TOP OF THE PUMP! It was like take a penny, leave a penny system in the corner store.

@rjh2459 5 жыл бұрын

Thanks Eric. Great fix

@Talisman-tb6vw 5 жыл бұрын

Sorry we didn't come over to your town to eat up all your icecream. But we did go to Letchworth Park and the wineries of Lake Seneca, and Ithica. And we've been spending time at Watkins Glen race track. And a few dozen went to Niagara to see the falls. We leave tomorrow to go to the Seneca Army Depot for an Autocross event and then disperse. We did make the 11pm news though for our car show in Corning. 131 cars.

@borilopez8581 5 жыл бұрын

#1 fan here men another great vid

@HerrGans61 4 жыл бұрын

I have been putting up with this issue since I bought by 2012 Fusion used in early 2013. Got a scan tool just for clearing the check engine light. It's the only reason my light has come on every few months. I know it's the EVAP leak because the light sets as soon as you turn the key and the engine runs fine. Load up on WD-40 and keep the filler area clean.

@mikefedele4521 5 жыл бұрын

Cool find/temp fix. What kind of lift did you get to replace the old one?

@fire7765 5 жыл бұрын

Well done Eric.

@billyyoder8171 5 жыл бұрын

Thank you Eric. Good job. Have a blessed and safe week.

@jwwilliams 5 жыл бұрын

Man you were hammering that focus! Lol..

@PoliceWillProtect 5 жыл бұрын

Love to see a vid of the new hoist install!

@AricVogel 5 жыл бұрын

I recently bought a 2010 Ford Escape with that cap-less system, I actually thought it was a pretty cool feature. Seems plenty reliable to me, 9 years old and no codes. As for the usefulness, anything that can save some hassle when I'm filling my car up in a freezing cold Canadian winter seems like a win to me. And there does appear to be an outer sealing gasket on mine to keep the dust out when the door is closed, so I'm not worried about dust or dirt getting in there.

@SierraOne 5 жыл бұрын

I've always been skeptical of those stupid caps... I wonder if someone makes a "replacement" with a cap? Dorman :) Great Video

@craig9802 5 жыл бұрын

This was, strangely, one of the more violent episodes I've seen yet. I was less scared when the bearing puller went flying. I may need counseling. Or another beer. Yeah, all good now. :D

@SidebandSamurai 5 жыл бұрын

My car actually threw the same code a few days ago. (this is not an advertisement but) I bought the Blue Driver ODB scanner to see what the code was. Yes, it was the Evap code (slow leak). Spoke to my Mechanic, he told me most likely this is a fuel cap issue (no my car is not fuelless, or capless ;-)) he told me he could take it in and smoke it just like you did. I did exactly what this video did, I used some wd 40 to clean the fuel cap seal and cleared the code, and no problem. Even though this repair did cost me 90 bucks (the cost of the ODB scanner) I really feel it was a good investment in my tool kit. Lemur is the Canadian company that updates the android app/database for vehicles. Maybe the South Main Channel could purchase one of these and see how they compare to the professional scanners. This scan tool felt pretty professional to me ... but then what do I know.. To take from a great mechanic on line, the South Main Channel "Remember if I can do it, so can you"

@lwilton 5 жыл бұрын

The real ez-fuel system went away in the 1960s. You drove into the service station, rolled down your window, said "ten regular", and you got gas, the windows cleaned, water and oil checked, and tires topped up if needed. Then you paid $3.20 and left. Never had to deal with a gas cap at all.

@MrRShoaf 5 жыл бұрын

It didn't go away, in Oregon amd New Jersey no self serve gas.

@fks-pv8il 5 жыл бұрын

Dawg, you seem to enjoy that emergency filler funnel a bit too much... lol. Love your videos!

@McBosshog85 5 жыл бұрын

Fordtechmakuloco is the master of Fords. Brian has excellent content

@ReclusiveMountainMan 5 жыл бұрын

Best of the best.

@McBosshog85 5 жыл бұрын

Oh yeah, probably my favorite channel to watch. Sad he doesnt upload content often

@throttlebottle5906 5 жыл бұрын

master is excessive ego swelling, but "good and great" is fitting! as for many others that want to do said work and learn/teach!

@explorerzero1 5 жыл бұрын

I went under my fuel door release lever in the car and found lots of corrosion from my boots. Gas and brake lines go through there. Fluid film!

@bobflannagan7262 5 жыл бұрын

Always wonderful presentations, Eric. Thank you. I am trying to resolve an 08 Saturn Outlook 3.6L which immediately blows a/c clutch 10A fuse each time. I need wiring diagrams and would love your suggestions. Thanks always.

@magnumjohnson9628 2 жыл бұрын

Try flicking your left testicle. I find that helps with wiring diagrams

@LMacNeill 5 жыл бұрын

I've always wondered about the quality of those capless fuel systems... I've owned two cars with this system, and haven't had any issues - but I also haven't owned either of those cars for more than 4 years.

@4b131 5 жыл бұрын

Strange thing is Ford makes a fuel cap as an accessory for the capless system 🤨

@08StreetGlide 4 жыл бұрын

Locking Fuel Plug Part No: 8U5Z-9C268-B SRP: $24.99

@defendermender4959 5 жыл бұрын

Don’t leave us hanging like that what lift you buy Eric? 🧐

@clarkboyer8711 5 жыл бұрын

I’d like a discussion (lecture) on scan tools. I’ve noticed a Snap On and a Bosch then there is the laptop. Some jobs use a smaller scan tool then there is a host of other digital wonders that are used under the hood. All that said, let take it a bit at a time, I’d like to start with scan tools knowing why each is chosen for which job or why one is better than another. Thanks for your time and interesting topics. Clark

@xIntoThePitx 5 жыл бұрын

Is there a replacement to convert it to a normal cap neck I wonder. I'd be looking into that if I had a vehicle with that capless thing, I don't want dirt getting in the tank every time I stick the nozzle in there, let alone the leaks.