Checking and Adjusting Gas Pressure with Manometer

No video

Checking and Adjusting Gas Pressure with Manometer

Рет қаралды 32,736

Күн бұрын

Checking gas pressure of your furnace with digital manometer.
Uei EM201B (uses about a quarter pound of pressure)
adjusting gas pressure, also discuss combustion analysis
Make sure to shut off your system before you disconnect the hose so you don't blow gas into your open flame! Safety first
Reinstall your plug and close it up.
UEi EM201B Differential Pressure Manometer is a ruggedly designed manometer that is an intuitive digital alternative to taking "U-Tube" pressure measurements. UEi EM201B upgrades the original EM201 by adding Pascals to the unit options and allowing the Min/Max to be reset at any time as opposed to on start-up only.

Пікірлер: 15

@eazypeezy6195 Жыл бұрын

I’m just a apprentice thrown to the fire, this video definitely helps!

@nattybohman Жыл бұрын

That’s wassup man hope you’re with a good company and are picking up fast, but to a degree it can be the best way to learn.

@eazypeezy6195 Жыл бұрын

@@nattybohman I work for a very small company. Only me, my boss and my journeymen. My journeymen is great and I’ve learned a lot from him in 2 years. That’s kind of why I’m being exposed to a lot more because we simply don’t have the man power to be able to send multiple guys at a time.

@revup67 3 жыл бұрын

thanks for this video, quite helpful. Just one question for us newbies, where you say "make sure it's on the right setting". The setting isn't mentioned nor is the video display clear enough to determine. I would gather of the choices this would be : "In-Wg"

@mariosmith8456 2 ай бұрын

I was thinking the same thing, I came to this video for instruction and didn't get what I needed

@peterrivas08 2 жыл бұрын

Great video, would uou need to also adjust the incoming gas pressure?

@twistedv3r1ta5 6 ай бұрын

Outlet is 3.5"WC what is the inlet?

@detroitjohn4724 7 ай бұрын

what is the correct unit of measurement ? Have digital Manometer with 7 different settings. Appreciate any input .

@twistedv3r1ta5 6 ай бұрын

For inches of WC you want in-Wg

@l.a.m7645 Жыл бұрын

Adjusting your gas pressure will decrease CO as well?

@Balticblue93 Жыл бұрын

You need a combustion analyzer to measure CO, but yes, in most cases, this will greatly reduce CO as there is more complete combustion. A single stage furnace at 4.8 is absolutely insane. Just remember, gas pressure is only one factor, but the only way to know and set the system properly is with a combustion analyzer in the exhaust vent measuring the flue output. Altitude and gas orifices play a great role in the equation also. I live in Denver, so we have different rules and guidelines.