Checking & Changing the Gear Oil in a BCS Sickle Bar Transmission

Рет қаралды 16,066

BCS America: Two-Wheel Tractors & Attachments

Күн бұрын

BCS Sickle Bar Mowers have their own oil-bath transmission, separate from the tractor transmission. This video will walk you through the process of checking and changing the oil in a BCS Sickle Bar Mower transmission.
If you need service or replacement parts, find your local BCS dealer here: www.bcsamerica.com/find-a-dealer
Find the full collection of BCS America's How-To Videos here: www.bcsamerica.com/pages/how-...

Пікірлер: 15

@weridebikes1000 2 жыл бұрын

Appreciate the video, I mow 10 (!) furrowed acres of pasture w/ a 57" DA sickle bar on a BCS 853.

@eduardodaquil158 2 жыл бұрын

Okay video

@small-timegarden 2 жыл бұрын

Straight

@alexpowell9 Жыл бұрын

How often do you recommend changing the oil on the sickle mower? Is there any other action that should be taken to lubricate the dual blades?

@gattibox 2 жыл бұрын

Which type of grease do you suggest to use for the maintenance?

@peter.s-yt 2 жыл бұрын

Quick question. On my single action transmission I used to pump 1/4 tube of grease before cutting. Ive noticed the when I remove the oil cap, there is grease in the transmision mixed with the oil! What can I do to remove it?!

@BCSAmerica 2 жыл бұрын

If you have grease in the oil, you would need to drain the gearbox, then add some solvent (diesel would also work) to break down the grease, then drain again.

@peter.s-yt 2 жыл бұрын

@@BCSAmerica How can it be drained? It's too viscous to drain through the bolt. Maybe the 4 bolts in the back that open the transmision. Is it a big problem to have grease mixed with oil? How would grease end up in the transmision in the first place? Many thanks!

@BCSAmerica 2 жыл бұрын

@@peter.s-yt Yes, you would need to rinse the gearbox with a solvent to break down the grease so that it is less viscous. There is only one grease zerk on the transmission. If you are pumping grease into that zerk and it is making its way into the oil, you likely have a bad seal. Are you getting oil leaking out of the PTO connection point?

@caseywaite9788 2 жыл бұрын

I recently bought a sickle bar mower at auction. How do I tell what year it was made?

@BCSAmerica 2 жыл бұрын

Sickle bars can be very tricky! Lots of changes over the years. First - is the PTO connection a 3-dog jaw or spline drive? If it is a 10-spline, it was built in 1994 or before. If it is a 3-dog, it is 1995 or newer. Do you know if it is single-action or dual? A picture would tell us a lot - info@bcsamerica.com

@caseywaite9788 2 жыл бұрын

@@BCSAmerica it is a 3-dog jaw and I have the quick attach coupler on my tractor.. I have another question, my tractor won't engage the PTO with it in front attachment mode, this is the first time I've used a front attachment, I've had my tractor for about 8 years, 722, is it possible something is seized preventing it from working? The PTO works great with my tiller.

@caseywaite9788 2 жыл бұрын

I should state that the sickle bar operates, but I can't engage the blades and go in the forward direction to cut

@BCSAmerica 2 жыл бұрын

@@caseywaite9788 Rather than copy and paste message back and forth, give our tech dept. a call at 855-832-4505 and we can help you out.