I have this machine. it's running fine but the implement has not enough power. it was working perfectly until my implement got stuck into some strings. it came to a halt. I cleaned the mess. and now it starts ok, drives fine in 1 /2 /3 speed mode. but when I start the pto, it slows down and the implement has no power. what could it be ? thanks for the help.
@BCSAmericaАй бұрын
We'd recommend taking it to your local dealer for service.
@mafia4463Ай бұрын
Где находится это синокасилка
@BCSAmericaАй бұрын
Are you looking for a hay rake? We have them on our website: www.bcsamerica.com
@simonndungu7894Ай бұрын
Awesome
@JesterianАй бұрын
Thanks for the video! What watch is that? Looks really nice.
@rottenwest34922 ай бұрын
Is that lady on steroids??? I ve got the same tech, am 6’3 guy and would have my upper back muscles screaming after such clean up. Bcs is specially using ladies to kind of lie of how easy is to operate their machinery. The reality turns out to be something else…. Get a 4w tractor and save your back.
@BCSAmerica2 ай бұрын
The key is to let the tractor do the work, not to fight it. Use the tractor's features like steering brakes, differential drive, and shuttle reverse to control the machine. If you're using your strength to try and guide the tractor, you're going to have a rough day. It's completely self-propelled, so using all of the tractor's features to your advantage will make work much easier. Carman (in this video) owns the tractor and flail mower she is using. She'd be the first to tell you that she's not a body builder, just an elderberry farmer who uses her flail regularly around her property!
@rottenwest3492Ай бұрын
@@BCSAmerica what if i have to do a straight line???
@toumoua72242 ай бұрын
Does the tines have a slip clucth safety incase you hit a big rock?
@ColinMill12 ай бұрын
Thanks for this. There is still confusion over here in the UK regarding the correct lubricant for the power safe machines and they are still supplied filled with a hypoid oil (you can tell from the smell). This seemed totally wrong to me and I'm glad to have your information on the correct grades.
@Northbengalams2 ай бұрын
Like
@michelthomas62542 ай бұрын
You are very helpfull, thank you.
@marcorazza2 ай бұрын
Which procedure do you suggest to use on a slope? Thanks
@tonis2u3 ай бұрын
does the gear oil need to 3" on the dip stick? It's hard to see the oil on the white stick.
@BCSAmerica3 ай бұрын
The distance from the top of the opening (where your finger will be clasping the dipstick) to the top of the oil line should be 3". The oil is barely on the tip of the dipstick in this video.
@klemenbobnic19963 ай бұрын
And why is this cone shi* better than pinion key? We have a lot on problems since new.
@BCSAmerica3 ай бұрын
The taper lock provides a much more secure connection, rather than a single set screw. Set screws can be a real pain to remove and can break.
@klemenbobnic19963 ай бұрын
And why is there a groove on shaft?
@Chris-id8qv3 ай бұрын
Will this attachment work for harvesting sweet potatoes?
@dzoncuper3 ай бұрын
Hi, Nice video ! What are the models showed in the video (both the tractor and the attachment) ?
@BCSAmerica3 ай бұрын
This is our flail mower (link is in description, here it is again: www.bcsamerica.com/product/flail-mower) The tractor is model 739: www.bcsamerica.com/product/model-739-ps
@genoleso20353 ай бұрын
The worst thing are tyres valve innthe wrong position after reverse and expanding the weel width but not so bad
@md-crab73793 ай бұрын
Where is the video to show it in use ?
@BCSAmerica3 ай бұрын
We have a few videos on Instagram: instagram.com/p/C1H9c7Ut0We/ . instagram.com/reel/Cs69hnru3qZ/
@syliverbogere92073 ай бұрын
I really need buy one
@rudolphhessian41834 ай бұрын
OMG Never do what 6:50 shows ,lifting tiller guard reaching near turning tiller. Dangerous. You will hear and look from side if tiller turning and only over dirt not concrete.
@ipresent4 ай бұрын
What's the difference between a flail mower and a brush cutter?
@BCSAmerica4 ай бұрын
Flail mowers have vertically spinning hammer blades that pulverize material into a fine mulch before letting it fall out the back. Brush mowers have horizontally spinning rotary blades. Flail mowers are perfect for shredding cover crops or spent crops in place if you want the material to break down quickly and feed the soil.
@ipresent4 ай бұрын
Is there a video about attaching implements without using a quick hitch?
@BCSAmerica4 ай бұрын
If you won't be using a quick hitch, the implements are simply attached to the PTO studs with the included nuts and domed washers. The domed washers MUST be installed with the dome facing away from the tractor, just like they are installed in this video. Keep that in mind and you should be good to go.
@genoleso20354 ай бұрын
Hello, are you sure torque value for transmission bolt is just 13.56 Nm(10 ft/lb)? Do you know the oil engine bolt too for honda gx390 mounted on bcs? Sorry for my english, regards
@BCSAmerica4 ай бұрын
Yes, 10 ft/lbs is correct. For the Honda oil drain, it would only need to be about 5 ft/lbs. Essentially, tighten with a wrench, then give it another 1/4 to half turn.
@TheBrianhowell685 ай бұрын
Where can I get the repair nut tool?
@BCSAmerica5 ай бұрын
The nut tool is included in any of the service kits that are highlighted in this video. Part numbers and contents of each kit can be found on Service Bulletin 1-10 (under General BCS Bulletins) on this page: www.bcsamerica.com/service-information You can order the service kits from any BCS America dealer: www.bcsamerica.com/find-a-dealer
@nicunicu46715 ай бұрын
I can't remove the bearing, as it is in this video it is stiff, what could I do ???????
@eddieslittlestack79195 ай бұрын
@BCS How thick of saplings is the brush mower recommended attack?
@BCSAmerica5 ай бұрын
General rule: if you can bend it over, the brush mower should be able to cut it.
@Mattfooey5 ай бұрын
I just bought an 853 second hand, nearly new. When I bought it, the handlebars were over the engine, with a flail mower mounted. When I rotate the handlebars to mount the tiller, the pto lever will not turn 180 to meet the handlebars in the new position the way it does in the video at 6:39, but will only flip up and over very awkwardly. It definitely doesn’t seem right.
@jmurphy19106 ай бұрын
Thanks very much for this clear and informative video; I was able to replace all 20 of the worn universal tines on my 26-inch tiller with new ones in just a few hours -including dismounting and mounting the tiller on my 732.
@BCSAmerica6 ай бұрын
Awesome! BCS is all about self-sufficiency.
@666bruv6 ай бұрын
Great way to kill soil and turn it into dirt, reverse evolution
@chrispoynter32976 ай бұрын
Great video ❤
@AugustKling6 ай бұрын
The single-stage snow blower is too light for medium and large tractors.
@BCSAmerica6 ай бұрын
Using a Quick Hitch and a PTO extension will put the smaller single stage Snow Thrower out further in front of the tractor and counterbalance the weight!
@AugustKling6 ай бұрын
I use a Quick Hitch and 20 kg additional weight.@@BCSAmerica
@user-bj6zp4tv2h6 ай бұрын
Would love to have them but can't afford them
@polosataferma6 ай бұрын
Чи підходить агрегат до моделі 722?
@BCSAmerica6 ай бұрын
@@polosataferma Model 722 does not have enough horsepower. There are also clearance issues with the handlebars.
@vahsijack10107 ай бұрын
Fiyatı ne kadar?
@ohiodeerhunting25527 ай бұрын
I serviced the brakes on my bcs, and also replaced the spring and detent balls on the pto slider. After I put it all back together, the right wheel doesn't want to spin good. What might the issue be? Bad ball bearings?
@BCSAmerica7 ай бұрын
@@ohiodeerhunting2552Glad to hear you got it figured out!
@adicoica90457 ай бұрын
Hello , what model or cod is on the part label,please
@canbeymazlumbekarmudanya24117 ай бұрын
HARİKA SÜPER FAKAT BIR SORUN VAR NEDEN GENİŞ DİNGILLİ ÜRETİYORSUNUZ TIRAKTÖR LERİ
@opera777777 ай бұрын
How many horsepower does this car have? How much does it cost?
@ohiodeerhunting25528 ай бұрын
No gasket or anything between the aluminum housings? How many ft lbs do I tighten the bolts when I put it back together?
@BCSAmerica7 ай бұрын
Silicone between the gaskets. Transmission cover bolts should be tightened to between 17-20 ft lbs. We have torque specs available on Service Bulletin 1-4, which can be found on this page: www.bcsamerica.com/service-information
@user-cb7ir6rc1t8 ай бұрын
Looks like one smart set up.
@erikacellar86798 ай бұрын
Hi BCS✋Do you have to put lubrication between two blades? Thx😊
@BCSAmerica8 ай бұрын
Not necessary. The material you are cutting actually provides all the lubrication necessary!
@BCSAmerica8 ай бұрын
@@erikacellar8679 That's correct. If you wash the cutter bar with water after use, you may want to apply some lubricant to prevent blade oxidation. But the blades do not require lubrication otherwise.
@erikacellar86798 ай бұрын
@@BCSAmerica I understand, thx a lot ✋
@ArcsandSparks3158 ай бұрын
I use my old beer cozy’s over the male quick connect. My problem was I get grease on my legs or clothing every time I bump into one.
@jeffpeters44978 ай бұрын
I just wish I could aford one with attachments to do my wife’s garden. Used a walk behind Gravely when I was growing up and loved it. Now I use a Troy Built Bronco. This looks like it would be much better than either.
@talebmotorcikel35198 ай бұрын
Send me your location plz i want to by gear hole sale
@VictorGarcia-dw7ud9 ай бұрын
Price ?
@biggetl13199 ай бұрын
I would love to see how that would work in un-tilled Alabama red clay?
@rudolphhessian41834 ай бұрын
i bounce my older model bcs off california sandstone and it hops skips ahead when tines hit. but if you have deeper dirt works great, just dont run over metal stakes on ground may take a leg off. I want to buy newer model like 779 with forward reverse knob control.
@kutzbill9 ай бұрын
While running the rotary plow the battery acid spilled and went on the brake drums. I power-washed it off as soon as I noticed it, disassembled and cleaned all the brake parts. I did use a non hardening silicone coating on the pivot pins. I made sure none got on the shoes, and it was a light coating so it would no bleed and contaminate anything else. The only other problem is that it got on the aluminum extensions. I am thinking I may have them anodized to protect them from oxidation. Do you see any issue with doing this? Thank you for your time.
@organicvids9 ай бұрын
Doesnt seem like 4k psi. Is yours set to 2k?
@wyosundancer9 ай бұрын
I used the Gravely a long time ago. It had a cart, but was very hard to find. I found that with a homemade hitch I could mount a regular garden tractor trailer. It is actually easier to push the cart than pull it. It really worked well for filling raised beds or anywhere that had tight spaces to maneuver in.