Chem-X vs. 10,000+ Miles of Overlanding America

Рет қаралды 499,240

Күн бұрын

My 4th of July Sale is live on chem-x.com! 20% off all my liquids and 10% off everything else!
Here's a lot of the stuff I use in my videos!:
Chem-X STARS+STRIPES TOUCHLESS SUPER CONCENTRATES: www.chem-x.com/products/stars...
THE TOUCHLESS FOAM CANNON KIT: STARS + STRIPES EDITION: www.chem-x.com/collections/to...
KEW CONNECT ADAPTER + PLUG: www.chem-x.com/products/kew-c...
KEW to QC Adaptor: www.chem-x.com/products/kew-t...
ST-330 LOCKING ADJUSTABLE NOZZLE HOLDER: www.chem-x.com/products/st-33...
Tornador MAX Z-030 Professional Cleaning Tool:
amzn.to/3zMnWi1
My Favorite Detailing Brushes:
www.chem-x.com/collections/de...
IK MULTI TR Trigger Sprayer: www.chem-x.com/collections/tr...
Chem-X Interior Cleaner: www.chem-x.com/products/inter...
Edgeless 245 Microfiber by The Rag Company:
www.chem-x.com/collections/mi...
Chem-X Glass Cleaner: www.chem-x.com/products/glass
DIAMOND MICROFIBER GLASS AND WINDOW TOWEL: www.chem-x.com/collections/mi...
IK E FOAM PRO 12 WITH BATTERY POWERED AIR COMPRESSOR: www.chem-x.com/products/ik-e-...
Chem-X HEAVY DUTY SUPER CONCENTRATED TRUCK WASH + DEGREASER + APC: www.chem-x.com/products/heavy...
MOSMATIC HURRICANE PRO HURPZ-520 UNDERCARRIAGE CLEANER: www.chem-x.com/products/mosma...
SUTTNER ST-164 DUAL FOAM INJECTOR: www.chem-x.com/products/suttn...
SUTTNER ST-75 FOAMER - BUILT COMPLETE: www.chem-x.com/products/suttn...
THE REAL DEAL - TOUCHLESS FOAMING KIT:
www.chem-x.com/collections/to...
THE CYCLONE MICROFIBER SPONGE: www.chem-x.com/collections/br...
Chem-X Awesome Sauce Detail Spray:
www.chem-x.com/products/aweso...
Chem-X SNAKE OIL TOUCHLESS SIO2 CERAMIC FOAM SEALANT: www.chem-x.com/collections/li...
Chem-X D-LIME 90: CITRUS DEGREASER + ASPHALT REMOVER: www.chem-x.com/products/d-lim...
My Reelcraft Water/Air/110v Power Reels: www.chem-x.com/pages/reels-booms
THE COMPLETE MOSMATIC WALL BOOM EXTENSION KIT (TOTAL REACH 24' 7"):
www.chem-x.com/collections/ce...
Chem-X Tire+Trim:
www.chem-x.com/collections/li...
Chapters
0:00 Intro
2:27 Pre Rinse or No?
5:39 Touchless Test 1: Non Pre Rinsed Side
7:04 Touchless Test 2: Pre Rinsed Side
7:31 Touchless Wash Results
9:57 Interior Detail
15:59 Undercarriage Wash
21:55 Prep Wash Before Buffing
29:05 Buffing
37:37 Snake Oil SiO2 Sealant
40:34 Upgrades
53:05 Engine Clean Up
55:59 Roofnest Clean Up
58:04 The Real Big Reveal

Пікірлер: 374

@BrettCrowther 11 ай бұрын

Not many people understand the amount of work that goes into a detail like this. Great job!

@afonsofreitas3595 11 ай бұрын

A lot of unnecessary steps but yeah it takes a long time to complete a full detail like this

@8CULL 8 ай бұрын

A lot of incorrect methods. But I still appreciate his thoroughness.

@waynefromnewfoundland8740 Жыл бұрын

Congrats to you both on the proposal. I wish you many years of a strong partnership. This wish is from a guy who is about 4 months away from hitting the 40 year mark. Good luck and nice to see you post. 👍🏻😎(As a P.S. this video is what you call detailing😂😂😂)

@ChemX Жыл бұрын

Thank you and congrats to you too lol😁👏

@sleddersofnl2302 Жыл бұрын

Aye fellow newfie. didn't expect that

@GStreat Жыл бұрын

The editing for the video is crazy! I wish I could give it more than one like.

@ChemX Жыл бұрын

Man that’s great thank you lol

@nickgronendyke3902 Жыл бұрын

I liked it for you bro, I got u

@GStreat Жыл бұрын

@@nickgronendyke3902 thanks a lot man. That was bugging me lol

@emilianogarcia258 Жыл бұрын

you're the shit man, you deserve way more attention. keep it up.

@ChemX Жыл бұрын

Thanks I appreciate that!

@Piglife101 Жыл бұрын

Oh man you’ve got me in tears on this one, ya big softie! ❤ congratulations

@ChemX Жыл бұрын

Lol thank you😁👏

@nadiameza6708 Жыл бұрын

What did I just watch. Love it ! Just bought my first 2023 wrangler Sahara- in love !

@zerohelix87 Жыл бұрын

you're a man that truly loves his rig

@FD-dh2fu 9 ай бұрын

Wow the detail here was tremendous. Amazing JOB.

@garrettdavis5220 Жыл бұрын

Heavy duty, used it today. Great stuff and dillutes. Great product

@ChemX Жыл бұрын

Awesome to hear it thank you!

@Savagegunner217 Жыл бұрын

Congratulations chem on the proposal 😊❤

@ChemX Жыл бұрын

Thank you!

@skylertalley Жыл бұрын

I almost never make it through more than 5 minutes on a youtube video and I just watched this all the way through. Your detail, edits, videography and work is outstanding. Coming from a landscape service business owner im impressed!

@apollo4657 Жыл бұрын

10:24 OK bro, I legit laughed out loud. Well played. 🤣👊🏻👌🏻

@ChemX Жыл бұрын

Lol yeah that was exactly how I felt everytime I opened that door during the trip, we’ll be bringing less stuff next time😂

@enrirod89 Жыл бұрын

congrats brother on taking that big step!

@ChemX Жыл бұрын

Thank you!

@sabrina6499 Жыл бұрын

This was so amazing!! Thank you for sharing! 🥹🥹 congratulations to you both!! 💕

@ChemX Жыл бұрын

Thank you!

@amer8530 Жыл бұрын

Congratulations to both of you guys on the proposal. Best wishes for the future and keep up the awesome content. Your videos are fire.

@ChemX Жыл бұрын

Thank you I appreciate that!

@YasserAlaska Жыл бұрын

This is by far .. the BEST detailing video i have EVER seen The setup, lighting, presentation, music, editing and car choice .. all perfect Amazing.. just amazing

@calebsamuel2214 Жыл бұрын

Congratulations man many blessings on the years to come. So glad to see you posting again love your videos brother

@ChemX Жыл бұрын

Thank you much appreciated bud!

@birdiebrandon Жыл бұрын

Dude congrats!! This is awesome!

@ChemX Жыл бұрын

Thank you!

@beardeddad74 9 ай бұрын

This video came up as a recommended watch, glad it did! Cheers from Acushnet, MA! 👊🏼

@_Julie_Bee Жыл бұрын

OMG congratulations !!!🎉🎉🎉 Oh and use compressed air to blow out your buffing pads! Like your clay, you don't want to scrub what's deposited on the pads on your paint!

@ChemX Жыл бұрын

Thank you! That’s a great tip I’ll use that!

@EARivera 10 ай бұрын

Great great video, love the details on everything.

@myronas Жыл бұрын

Great trip. Enjoying your vehicle and at the same time living your life in full. Awesome. 🎯

@pjfan173 4 ай бұрын

How can I not like and subscribed when a video starts the way this one did. Congrats and God Bless

@xfilecity 10 ай бұрын

This is my first video I’ve seen on your channel and congratulations on the proposal. That was awesome to see in the beginning of the video. Your rig looks great and for some reason watching people detail their vehicles is very satisfying. I wish I had a garage and a truck to work on. I’m subscribed to your channel so I could continue watching these cool videos and showing support. I was considering getting an SUV after my lease is up next month but now I might actually consider getting a jeep gladiator. I need to do more research. Excellent video.

@illphill5588 Жыл бұрын

Congratulations man on your proposal happy for you both and that machine for the under carriage is a beast

@rojolazper8246 Жыл бұрын

Congratulations on the proposal. That was an awesome video !

@ChemX Жыл бұрын

Thanks!

@1kontrabida Жыл бұрын

WoW that was a great surprise! got me of my chair and had to hit the replay a few times lol! Congrats and more power to u and the future fam! Thanks for the July 4th discounts!

@ChemX Жыл бұрын

Thank you so much!

@urcousinfromboston9052 Жыл бұрын

Congrats to you and the soon to b wife, awesome stuff! Ya'll keep killing these videos, enjoy the 4th. Kona looks like quite the toy driven pup, shes a hoot! That jeep is a beauty, wow!

@ChemX Жыл бұрын

Thank you so much you too!

@nicklane488 Жыл бұрын

Congratulations man from East TN. Love the Channel

@ChemX Жыл бұрын

Thank you much appreciated!

@theoneandonly2590 Жыл бұрын

Congratulations bro!!! Happy for you!!

@ChemX Жыл бұрын

Thank you!

@austinramsey4540 Жыл бұрын

Awesome video man happy for you my guy!

@LOVE-62 Жыл бұрын

Congratulations on the proposal, I learned so much watching this video just now on how to properly clean my Jeep. Man great job. Now I just need all those proper tools you have 😆

@auciellon9871 8 ай бұрын

Congratulations buddy!

@tylerharberts Жыл бұрын

Congrats man! Best video you’ve done yet. Keep ‘em coming!… really digging that Mosmatic undercarriage cleaner too.

@ChemX Жыл бұрын

Thank you I appreciate it!

@TeamLosi4life Жыл бұрын

Congrats brother! 🎉🎉🎉 Just picked up some S&S and some snake oil can't wait to give it a go!

@ChemX Жыл бұрын

Thank you I appreciate it!😁👏

@UnniG Жыл бұрын

Wow this is Awesome .A Classic of all times:) Congratulations 😇🌎

@mattjohnston3521 Жыл бұрын

Your attention to detail is therapy for me.

@look6312cJ Жыл бұрын

I once again realized how significant the happiness that freedom brings is through this video.

@ImNotMC 3 ай бұрын

Sooooooooooooo satisfying!!! Great job!

@user-bj6tb9wo4z Жыл бұрын

I would really enjoy a video of the steel rack and how you have things organized / mounted... awesome video -- kona really enjoyed the trip..

@jonkassidy1476 Жыл бұрын

Lol I would love to see all the camping and off reading. Great video

@RR-24 Жыл бұрын

Amazing clean up by the way! And congratulations! ❤️

@ChemX Жыл бұрын

Thank you!

@OryXIII 11 ай бұрын

wow bro this did not feel like an hour! well done! amazing

@nurdinimanaliev9635 Жыл бұрын

Man this vehicle is just an insane! Great video, enjoyed a lot!

@nicokasper8461 Жыл бұрын

Congrats on the proposal! Love your videos man. Some JL and JT owners use a weather strip or rubber piping between the fenders and body to keep the rocks from getting stuck in there. Keep up the great work!

@ChemX Жыл бұрын

Thank you! That’s a good idea I’ll have to do that

@user-ze4eh4wp4o 11 ай бұрын

No, water will rust iron.@@ChemX

@adambrewer4400 Жыл бұрын

first off congrats to you and your lady, secondly I love the overland style on the new jeep trucks, maybe someday you could give us a tour of your rig and all your overland gear.

@maxharwood6273 2 ай бұрын

Love your vids man, keep it up!

@still-DJ Жыл бұрын

Congratulations on the perfect trip! I missed it so, I'm sure you used iron remover before the clay bar and polishing. Jeep turned out amazing, looks showroom ready again.

@ChemX Жыл бұрын

Thank you! I totally forgot iron remover I need to grab some, any recommendations on the brand to get?

@kevcatto2601 11 ай бұрын

Congratulations to you both from Aberdeen in NorthEast Scotland ❤ 🎉

@84eurospec911 Жыл бұрын

Nice work! I would have suggested to coat the holes before installing the riv-nuts. Seeing how wranglers/gladiators are made of tin foil, rust can easily be an issue sooner. But she looks good 👌🏻

@jpht.adventures 10 ай бұрын

100%

@824Gary 8 ай бұрын

Nice video, love your shop

@johnbrown3951 Жыл бұрын

From a Jaguar Land Rover fan that is a beauty of a truck as you say stateside i believe. What you do is heaven in my eyes a bit of off roading and then detailing it back to near perfection in a shop to die for with all the tools and chemicals on tap. I am a Wax fan with an extensive collection from Mitchell & King based near Glasgow Scotland about 5 mins from my home so close enough to pop over when stocks run low. Came across your channel by chance so I liked and subscribed.

@ChemX Жыл бұрын

Thank you I appreciate ya subbing up and hope you have some great adventures out that way!

@bigpete405 Жыл бұрын

You’re the man. Congrats to you guys

@SinCityDetail Жыл бұрын

This is one of your best videos. I just detailed a JK, not as dirty as your Gladiator, mostly because the owner just got new PRP seats. Again great job on this!

@ChemX 11 ай бұрын

Thank you I appreciate that!

@gsservicestation5808 Жыл бұрын

Congratulations brother 💕💕💕

@ChemX Жыл бұрын

Thank you!

@mmmemgggg617 Жыл бұрын

Congrats on the proposal! That trip looked amazing and what a jeep to do it in!

@ChemX Жыл бұрын

Thank you!

@loganbrady69 Жыл бұрын

Great content, I wish I had found your channel sooner!!

@donnabrunner3125 11 ай бұрын

I just found your channel... Awesome video!!! ❤❤❤

@bhoward3390 Жыл бұрын

Mojave owner here as well. Dump those floor mats and pick up the Armorlite system for the flooring. So easy to keep clean and comes with drain plugs. You will thank me once you install them.

@ChemX Жыл бұрын

I’ll look into that thank you!

@HeavyDuty177 Жыл бұрын

Congratulations yall 🎉

@ChemX Жыл бұрын

Thank you!

@timothybracken1728 Жыл бұрын

sick car man wow , insane setup

@user-ze4eh4wp4o 11 ай бұрын

a beautiful work of art

@aaronalp2639 Жыл бұрын

Congratulations Bob (and Kona too!)

@ChemX Жыл бұрын

Thank you!

@jeremychippett905 Жыл бұрын

Bro u really put a great effort into this one Good job.

@ChemX Жыл бұрын

Thanks yeah I’m beat I need another vacation lol

@edy240sx Жыл бұрын

Amazing jeep and beautiful color señor…

@lukesautodetailing615 Жыл бұрын

Congratulations!!

@ChemX Жыл бұрын

Thank you!

@user-fs1iy6fz8d Жыл бұрын

this is one of your best videos

@ChemX Жыл бұрын

Thank you that’s good to hear, this one took a lot of time lol

@josephvecchio8528 Жыл бұрын

Hes back been waiting for another video :) been ages man

@ChemX Жыл бұрын

Yeah my goal is to start getting back on track with more regular uploads, edits like this one take quite awhile to make tho

@briancarpenter8297 Жыл бұрын

Congratulations man!

@ChemX Жыл бұрын

Thank you!

@laurenspouw8807 Жыл бұрын

You should have used a paint pen inside the drilled holes to protect and prevent rust. The hole is bare metal and will start rusting if its not protected. You can easily go back and still do that. Congratulations on your engagement! Thanks for the video!

@ChemX Жыл бұрын

Dammit now I can’t stop thinking about that lol, that’s a good heads up tho thank you!

@bmwe30guy Жыл бұрын

I use engine enamel in a spray can, spray it into a cap and use a q tip. Dab the q tip on the holes. I'd use a wax based undercoating on the other side as heavy as possible since you got it in there

@johnosullivan8116 4 ай бұрын

Congratulations on your engagement ❤❤

@ChemX 4 ай бұрын

Thanks!

@panda51829able Жыл бұрын

Congratulations sir well done!

@ChemX Жыл бұрын

Thank you much appreciated!

@davidboyce6427 Жыл бұрын

Awesome display of work and Kona👍

@ChemX Жыл бұрын

Thank you!

@HarrySoundClips Жыл бұрын

Wow. You are a great filmmaker and video editor too. Congratulations. 🎉

@dankron_ 11 ай бұрын

Love the edit, never tought i'd sit and watch a hr long video of car detailing, but this got me hooked... quick question: what bed rack are you using on your jeep?

@reddyuda Жыл бұрын

To clean out your polishing pads, just use a compressed air blow gun Run the unit on the lowest speed, and blow all the used polish and junk out Do it in a trash can or a box, it can get messy

@ChemX Жыл бұрын

That’s perfect I’ll definitely do that thank you

@joe.olivet Жыл бұрын

You’re back! Congratulations on the proposal. 🎉

@ChemX Жыл бұрын

Thank you!

@anthonymissirlis3710 7 ай бұрын

AMMO NYC if you want to geek out on paint and detailing and clay bars and buffing etc etc etc , or The Detail Geek . just came across your channel and your stuff is amazing dude . life saver probably a better water solution btw

@BelLavoroAutoSpa Жыл бұрын

Congrats Bob!

@ChemX Жыл бұрын

Thanks Martin!

@arvindchauhanlife5516 8 ай бұрын

your cleaning style is different from others Good interior, exterior or under bleow the under car area ❤❤ Love From India ❤

@GarrettHamilton Жыл бұрын

Maybe my new favorite video of yours tbh. One tid bit of info on the claying, a clay bar definitely is better for picking up those bigger pieces, however you *should* have used an iron decon spray after your contact wash and rinse, and then clay barred / mitt and then the polish stage. The iron remover spray (I use adams iron, and carpro IronX, Sonax Iron Fallout remove) would remove those big chunks and dissolve them ahead of your clay bar stage. Either way, loved this video!

@detailit Жыл бұрын

1st, welcome back Big Bob. You had me worried. I thought maybe you were really sick... so what a relief. Charlie gave me a little hint that you were ok. 2nd, CONGRATULATIONS on the engagement man! That's very cool! 3rd, Autofiber Mitt On A Stick; AMAZING. One of the BEST tools on the market if not THE BEST! Great video as Always man! Hey, this was Like a dream vacation for so many people. Just taking in all the Beautiful sights in America and enjoying the view. I'm thinking Kona is already missing it!😉 .... Wish we had met when you were in Cali... opportunity missed, and I realize this was family time and vacation... maybe another time, Big Bob❌️. Good to see you back! Tell the future Mrs. ❌️...... (Oh, that doesn't sound good does it?) Welcome to the family and I hope you two have a lifetime of fun and grow old tegther man! Take care Bob!

@ChemX Жыл бұрын

Thanks Doug yeah we’ll have to swing out that way again I’d love to cross paths with ya!

@detailit Жыл бұрын

@ChemX anytime brother!

@RS33743 9 ай бұрын

As you said you didn't know what you were doing! The one thing I always appreciate in regards to your videos is your honesty.... It's super important to real so people get what you are trying to convey in your videos / vlogs. I also noticed that you were just as honest in your customer reviews and one of the things I noticed with some of your lower ratings is that you state very clearly with your touchless product(s) is that you will need to put hands on! I have yet to come across ANY product that is truly touchless. I have owned many, many vehicles from older Camaros to my last big purchase for a new 389 Peterbilt and just recently a new Mustang GT. I am contemplating purchasing your products in order to reduce the amount of labor I need to wash my many cars (I have sold my trucking company). If anyone owns a Mustang they can probably relate to the paint issues that unfortunately Ford has been struggling with for their cars. They have amazing colors but adhesion has always been an issue and they don't hold up very well. So the least amount of actual manual scrubbing you perform on the paint is better for your paint job as it will impart less scratches which in the end is truly what you want when purchasing a "touchless product". It's all about removing the big bits so that you don't move them around on your paint while washing it. Your paint will always require some maintenance and waxing it's just what you need to do, it's inevitable! I will be looking into purchasing your double foam cannon and mezzo stars and stripes in the near future when my finances are just a little bit better. I hope you are doing well and good luck with your business. I have been watching your product videos on and off for a while now and would really like to sample them as soon as I can. Be well!

@jbass86 Жыл бұрын

Like the vid, detailed for a long time myself. When the pad got filled with compound an contaminates we would use compressed air to blow out the pads

@josephwilcox4311 Жыл бұрын

Great salesmen Great content Great rep for American Made Products

@vickomf1 7 ай бұрын

Hi new here.. the gas pump dispenser threw me off. Ridiculous and unpractical but it looks absolutely hilarious! 👍

@SimuVerse-wi6ky 7 ай бұрын

Great job sir

@johnmack1399 Жыл бұрын

Sweet, mibe next please!

@ethanblan435 Жыл бұрын

Congratulations! As far as claying goes, here’s my knowledge and opinion on what works for me on the cars I work on. It’s fairly long but good information to know. 1) The clay bar is a more aggressive step that will leave light scratching on the surface, needing to be polished after, whereas the mitt, if used with proper lubrication, will not need polished after. This is because the clay bar contains light abrasives to help remove contamination, and the synthetic mitt does not. 2) I personally use a perforated synthetic clay surface like your mitt. The most important thing with that is to use no pressure. It actually works better with less pressure, as counterintuitive as that may seem. I’d suggest with the mitt to place your hand on top of it, instead of inside, as you will create less pressure points with thicker padding between your hand and the surface. 3) As far as lubrication with the synthetic clay, I like to use an iron remover. The best way to do this in my opinion is to first wash the car, and while the soap is still on the car, do a spray of iron remover on the clay mitt and a spray on the panel, making sure to rinse the mitt in a soapy bucket between panels. A lot of people believe that an iron remover removes the iron particles; in reality, they remove the rust staining caused by the iron particle, not the particle itself. Keep in mind that not all iron removers work as a clay lube with all clay media, as some iron removers are diluted with a solvent that will damage the clay surface. Usually the high quality iron removers work well, but the only way to be sure is to test for yourself or find a combination that other people have had good results with.

@ethanblan435 Жыл бұрын

Also if you’re looking for a good pad cleaner, I’d look into the Lake Country System 4000 pad washer. It’s the best in my opinion

@ChemX Жыл бұрын

Awesome input I’ll put this to work thank you!

@Nick210 Жыл бұрын

Nice truck!

@bevyofbabes 9 ай бұрын

Great job washing and detailing however those rocker protectors are probably going to be an issue down the road. You should always try to paint the holes you drill when you make body modifications and also spray a rust inhibitor in the holes. It would be a shame if the rockers start rusting out. Otherwise it's a beautiful rig and you've outfitted her nicely, what a beast!!!

@christophernuckolls9964 8 ай бұрын

The body is aluminum.

@alezo1540 Жыл бұрын

I would likely kill for this garage cleaning setup 😀

@ValikFellbane Жыл бұрын

For cleaning the pads out during buffing you should use your air compressor and blow it out of the pad. Just make sure you are away from the vehicle and have very good ventilation. Turn the buffer on and let the pad spin while you blast it with air between panels. (i.e. every time you lift the pad to go to the next area.)