Chess Board with Copper Inlay
Рет қаралды 733,978
5 жыл бұрынWatch how I make an end grain chess board with a copper inlay with the owner's initials in the walnut frame.
Get the Freshest CA glues in the market at Starbond by clicking here: www.starbond.com/?rfsn=249403...
Use code WOODUMAKEIT at checkout to save 15% off your purchase.
You can also purchase the freshest Starbond CA glues at Amazon here: amzn.to/3ipDbnn
You can find everything else I used in this project at my Amazon storefront at www.amazon.com/shop/woodumakeit.
Items I used in this project include:
Grizzly G1023RLWX Table Saw amzn.to/2AGvqVV
INCRA Miter Gauge: amzn.to/2HTzvef
iGaging Caliper: amzn.to/2WAjcGh
Freud Thin Kerf Rip Blade: amzn.to/2PIYtkK
DeWalt Planer: amzn.to/2I6KIHF
Ridgid Random Orbit Sander: amzn.to/2Upi0s4
SuperMax 19-38 Drum Sander: amzn.to/2DOWJzX
Freud 8" Super Dado Set: amzn.to/2TAO3C2
Ridgid Router: amzn.to/2FAfxVk
Freud 3/4" Double Flute Straight Router Bit: amzn.to/2DE3hRh
Dremel 3000: amzn.to/2FU8dk7
StewMac Precision Router Base: amzn.to/2UhCdAI
Dremel Sanding Discs: amzn.to/2UgtK0K
Artistic Wire 21-Gauge: amzn.to/2IcR1cp
Titebond III Wood Glue: amzn.to/2qVPHRs
HVLP Spray Gun: amzn.to/2WAj2Pb
In-line Moisture Filter: amzn.to/2HOPtGn
Zinsser SealCoat: amzn.to/2DPxkpH
Arm-R-Seal Satin Finish: amzn.to/2V4vLt3
Arm-R-Seal Gloss Finish: amzn.to/2FKT7yE
Crystal Clear Paste Wax: amzn.to/2CKgvuu
Paraffin Oil: amzn.to/2I0FYDc
Pumice Stone: amzn.to/2WAKbS9
3M 220-grit sandpaper: amzn.to/2HOaQHA
Thank you for subscribing to my channel! / subscription_c. .
And be sure to check out my website at www.woodumakeit.com !
email: woodumakeit@gmail.com
Instagram: / woodumakeit
Facebook: / reallywoodumakeit
Twitter: / woodumakeit
Pinterest: / woodumakeit
@SamM6945 5 жыл бұрын
This is my board that Mike made for me - and I couldn't ask for anything better. Absolutely gorgeous craftsmanship, and amazing to be able to see how it was done. Thanks again Mike!
@Woodumakeit 5 жыл бұрын
My pleasure, Sam. And great meeting you in person today after several months of discussion via email !
@stormleo4900 5 жыл бұрын
How much does it coast?
@stormleo4900 5 жыл бұрын
Lucky yoy :) ♥
@SamM6945 5 жыл бұрын
@@stormleo4900 I'll let Mike respond to that and provide an estimate quote
@stormleo4900 5 жыл бұрын
@@SamM6945 ok :)
@RogerRabbit342 5 жыл бұрын
So many people hating on the inlay. 1. ist customer request. 2. this guy does woodwork and you can see it is his passion. And he’s putting himself out there for everyone to see. It’s easy to judge when its not you doing it. Its a great work of art and the customer commented saying he loves it. Come on guys, get a grip
@MyName-tb9oz 5 жыл бұрын
I have done copper inlay. And did a better job of a more complicated inlay. And I call myself a wood butcher.
@efrancis19 5 жыл бұрын
@@MyName-tb9oz Well then post your own video so we can all trash talk your work.
@MyName-tb9oz 5 жыл бұрын
@@efrancis19, you'll notice that I'm not posting videos claiming to be an expert of any sort. In fact, I call myself a, "wood butcher," in recognition of my lack of woodworking skill. But I still know what's going to happen to that chess board. Nor am I selling things for $400 - $500 that are of inferior quality because I couldn't be bothered to search the internet to find out what is going to happen when I do something. Maybe you'd like to trash-talk the set of shelves I built for my garage? They're massively overbuilt. You could point out how I wasted 2x4s when they really weren't needed for the project, perhaps? And that it was stupid to make the shelves out of 3/4 OSB (even though I have a huge stack of it that I bought for $30). Or how I didn't really need to put a 2x2 support across the middle of the shelf? I dunno... But they work. And they'll be around for the next 75 years, I expect. Long after I'm dead. I call that a win, really. You could trash-talk me for how long it took to build them without a $20,000 workshop, maybe. Whatever, fool. I don't really care. Better to underpromise and overdeliver.
@efrancis19 5 жыл бұрын
@@MyName-tb9oz LOL, I guess I must have struck a nerve. You have a nice day.
@MyName-tb9oz 5 жыл бұрын
Yes, @@efrancis19, ignorance, theft, and fraud annoy me. Bless your heart.
@wefinnabecomeaking2506 5 жыл бұрын
A little tip for the anealing process, cover the copper in boric acid, the dunk it into hydrochloric acid, the boric acid keeps it clean, and hydrochloric acid cleans off what the boric acid couldnt keep clean, it also makes the aneal process faster than air cooling, and it does a betger job in my opinion:)
@wefinnabecomeaking2506 5 жыл бұрын
Also would like to add, silver, or brass would look better as the inlay instead of copper, they also polish alot better than copper and they keep their polish better, coming from a jewelry maker:)
@wefinnabecomeaking2506 5 жыл бұрын
One more thing, is when ur hammering it in, hammer it in with a hard mallet, could be wood, or plastic, or rubber doesnt matter, but not metal, it denst copper expecially annealed copper, now im not gonna eb all high mighty saying i know all, just giving some tips, u can choose to try them if you so desire:) from one fellow craftsman to another, just sharing some tips:)
@Woodumakeit 5 жыл бұрын
Thanks for all the tips. I really appreciate it and will give your suggestions a try the next time around..
@bourbon_sherbet1251 5 жыл бұрын
I've had a lot of success with taking my inlay pieces to a local laser engraver and having her burn the letters into the wood. Then I use copper dust and CA glue to fill the letters in. I've found it gives a VERY nice result... Just a thought.
@Woodumakeit 5 жыл бұрын
Thank you for the suggestion. I'll definitely consider trying that approach for an upcoming project when I need to do an inlay like that. I'm always up for trying something new!
@higgsthebosun 5 жыл бұрын
I wondered at inlaying with hot solder onto a copper foil base and then coppering the solder, as per stained glass work
@mattperryman7491 4 жыл бұрын
Do you have any pics of an inlay like that? I'd really like to see one, and where do you get copper dust? Amazon?
@bearonatricycle1082 4 жыл бұрын
@@Woodumakeit Another good option would be to use copper wire instead of the wide flat that you used. The wire will be more workable and each letter can be made from a single piece. It will look rough until sanded down, but once sanded it should look completely integrated
@death1305sam 4 жыл бұрын
What about melted copper
@Carpenters_Canvas 5 жыл бұрын
I’m really glad to see u included the flaw of the chip for the costumer ( who you know would see ) very stand up, much respect , in life it isn’t about what mistakes u make it’s how u deal with them. I’m positive if it didn’t come out awesome you would ha e restarted .
@ryanbarker5217 5 жыл бұрын
i agree, it was a stand up move. having worked in manufacturing for 30 years, so many parts, even cosmetic stuff, are repaired it's ridiculous. the difference is the quality of the repair.
@johncraig2684 5 жыл бұрын
as so many have said already the inlay didn't match the great work of the rest of the board....but as someone who messes up sharpening a pencil i admire your skills and appreciate you sharing them with us.
@handoflegion6078 4 жыл бұрын
You are genius....I respect guys with handskills in this machining world.
@Dericheau 3 жыл бұрын
Thanks for showing your inlay style. Really like your camera work and your personal demeanor.
@user-lq2cx3sc2k 5 жыл бұрын
Amazing job, and I`m really glad that Sam loved it. Despite the hard time making the inlay, for me it`s more personal than a ready made letters cut typically the same. I think the inlay added to the originality of the piece. God bless you all.
@allencarver2639 5 жыл бұрын
I'm an avid chess player and wood worker and have thought of making a board and you have given me some great idea's. Love your music along with your voice made this a very enjoyable video.
@245194LAC 5 жыл бұрын
Wood I make it? Firstly, beyond my skill set and a significant shortage of tools. Great wood crafting. Outstanding.
@happydog6500 5 жыл бұрын
To anneal copper fully you should quench it after you heat it in cold water, it does the opposite to steel and makes the copper as soft as lead.
@darkshadowsx5949 5 жыл бұрын
how do you heat it in cold water? "quench it after you heat it in cold water" you mean, you should quench it in cold water after you heat it. word order makes a big difference.
@happydog6500 5 жыл бұрын
@@darkshadowsx5949 reading is not your friend
@mdrew44628 5 жыл бұрын
@@happydog6500 to be fair, you should have used some commas, but your reply was funny....😀
@soloroid 5 жыл бұрын
But if it was soft as lead he would not have been able to hammer it into the grooves as he did.
@TheWireEDM 5 жыл бұрын
Annealing copper happens when it is heated. The cooling rate has no effect on its hardness, it will be soft if you don't quench it or if you quench it. Quenching copper is just to remove the waiting time for the cooling to happen, as copper will stay hot for long due to its thermal properties.
@jimhester2004 5 жыл бұрын
Super job! I've been trying to work up the courage to try one, and I learned some useful things here. Thanks.
@DsHardWoodCreations 5 жыл бұрын
Beautiful. Moral of story take on clients with simple initials such as “O”. 😂😂😂
@Woodumakeit 5 жыл бұрын
Totally!!
@justindesilets3526 5 жыл бұрын
Even simple, I!
@jungko9031 5 жыл бұрын
How about just “I”. 😅
@DsHardWoodCreations 5 жыл бұрын
Even better
@giraffewithtattoos2770 5 жыл бұрын
Any Xavier's or Zander's need inlay work done? 😂
@jessejohnson159 5 жыл бұрын
I appreciate you posting all the supplies you used. I saw a few items for the first time. I plan on purchasing those items for future projects. Thanks!
@robertwoelk26 4 жыл бұрын
Beautiful work love the inlay
@donaldwesthoff8971 5 жыл бұрын
I also really liked your choice of music for the video.
@f.s.863 5 жыл бұрын
I like the kind of your character, your way to explain things and of course the work you make. Thanks for having you on "you tube". You are one of my favorites.
@Woodumakeit 5 жыл бұрын
Thank you so much!!!
@matthewbarncord3984 5 жыл бұрын
You're very good at explaining all of the important fine details while keeping it simple. Very helpful.
@pamcarr4003 5 жыл бұрын
Great job! Beautiful board! Thanks for sharing. Pam
@Itsadrianyay Жыл бұрын
this is super awesome. especially the inlay and also the whole thing
@HomesteadingTexas 5 жыл бұрын
Totally Beautiful! Excellent craftsmanship !
@johnchan6191 5 жыл бұрын
Wow, such a beautiful chess board. Gr8 application of wood finishes. Thx 4 sharing on the internet.
@hedunlap 4 жыл бұрын
More importantly, thank you Al Gore for inventing the internet
@leec2106 5 жыл бұрын
Make it maybe when I was younger, now it would be very hard for me. What a fantastic build thank you for sharing your build online.
@peteconz1807 5 жыл бұрын
Mike, always nice to see a talented craftsmen with the right tools making a work of art. Thanks.
@rachelcoleman4693 4 жыл бұрын
I can't believe how nice this turned out. You're incredibly talented.
@tomgledhill7 5 жыл бұрын
That board is absolutely stunning! The copper inlay was meh for me.
@RetiredRhetoricalWarhorse 5 жыл бұрын
I agree. I think it looks like my handwriting and I wouldn't want to have to look at that on such a nice piece...
@psycopirla1 5 жыл бұрын
Agreed, it looks like my daughter handwriting practice
@evangoodwin4363 5 жыл бұрын
Agreed, not sure if it was a material choice or inlay technique. If he used the smaller gauge maybe he would have had better results. I think either experience or technique may make for a better finished result.
@anthonycope8637 5 жыл бұрын
Its a look concept but maybe trying a font change or useing it like the tiger wood would make more sense...a simple router job instead of the inlay might have also worked but wouldnt pop the same
@Yoshikaable 5 жыл бұрын
@@evangoodwin4363 There's a lot going on in the inlay, but let's start from the top. The font used was a bad choice. Then the transfer using carbon paper was sloppy. Next, he cut too deep of a track (hence why it broke off) and proceeded to use tempered copper. He diddn't properly measure or anneal the pieces. Next, he taps them in using a hammer after bending the copper (both hammering and bending work-hardened the copper), instead of annealing it again and using a press.Lastly he never filled it! Just epoxy! That just left the wonky lines in both the wood and the copper super visible. Lastly that copper is definitely going to stain the board green over time, as it oxidizes. Might be a cool look but not my cup of tea.
@Uptempostudio 5 жыл бұрын
thanks for sharing your work! Great to watch.
@akulm1829 5 жыл бұрын
Very, very cool. Yes, I will dive into this project. You have motivated me to do this!
@909sickle 5 жыл бұрын
Nice chess board. The serious intense music cracks me up.
@burnerjack01 5 жыл бұрын
Some of that music sounded mournful to me. I figured it was because of that piece that broke out.
@nopullingoutXD 5 жыл бұрын
okay good, i thought i was losing my mind! had to check the comments to make sure someone else saw it too!
@derekdavis3684 5 жыл бұрын
yeah, lol
@Steve_K2 5 жыл бұрын
Put me in the column that hates background music.
@mapleacrefarm 5 жыл бұрын
"Then I'll apply a thin coat of Tim Horton's Coffee" - LOL Beautiful work!
@Bob_Adkins 5 жыл бұрын
Great job, such a wonderful, high quality board that will last 10 lifetimes. 2 things: The copper inlay didn't need to be so deep, too much risk of breakage or a bad fit. The hardest, toughest, most scratch proof finish I know is "Birchwood Casey Tru Oil". Try it, it's amazing. Polyurethane comes out too thick and plastic-y for my taste. Thank you for a great film!
@Woodumakeit 5 жыл бұрын
Thanks for the info, Bob. I'll take a look at Tru Oil and see how well it works.
@taniarichards9832 4 жыл бұрын
This was a fantastic piece of work. Thank you for sharing.
@RFMongoose 5 жыл бұрын
would i make it? yes, but i would probably use some different lumber, maybe purple heart, i do like walnut though. and i think i would copper inlay, or maybe brass, around each space rather than just the initials. but i got to say, your finish is breath taking.
@sparkythebuilder 5 жыл бұрын
The sign of a true craftsman is how well they hide their mistakes. ;)
@emostorm7 5 жыл бұрын
You are right, no hand made project is perfect. This is an old phrase from back in the day furniture making class, and it still holds true.
@TheMadawg67 5 жыл бұрын
@@OneJokeAtATime would be interested in seeing this fine work you speak of.
@jarchdm 5 жыл бұрын
Usually the worst critics are the ones who have never attempted to make a thing I their life
@jeffeverde1 5 жыл бұрын
@@OneJokeAtATime Sh*t happens- that's the nature of life. A skilled craftsman plans for and adapts to the unexpected. A true artist turns it into something greater than was originally planned
@221sk8er 5 жыл бұрын
@@OneJokeAtATime Why do you have to be so obnoxious? This guy never claimed to be a master craftsman, and its clear that he isn't, based on some of the ways he did things. That doesn't make him a hack, just someone learning and hopefully improving. I grew up in a family of professional home builders, masons, and cabinet makers; I am a professional furniture and cabinet maker. You speak of your brother being a master craftsman, but that doesn't mean he is infallible. I'm sure he has made and still makes mistakes in his work. To say that a true craftsman would trash a project because of a mistake, rather than working around and fixing the mistake just shows how arrogant you truly are. Humans are not perfect, so handcrafted items will never be.
@Anehab100 5 жыл бұрын
Good to see old Man Logan Alive and well
@devanconley1529 5 жыл бұрын
Your finishing techniques are great! Very beautiful and well thought out.
@Lutzboater 5 жыл бұрын
The copper inlay is perfect for the board. I'm sure your client was very happy with the result. Enjoyed the soothing music, also.
@LuisLarreaJr 5 жыл бұрын
Wasn't a fan of how the copper turned out but valiant effort and follow through. I just picked up 4 sets of pipe clamps so maybe I'll try something like this in the future.
@phillipcraggs6202 5 жыл бұрын
Agreed.
@Petair28 3 жыл бұрын
These videos are great! Thanks for sharing your art, Mike!
@Jamie-Russell-CME 5 жыл бұрын
Great work, really nice work. A great tip a teacher once told me about detail work is to save the sawdust for a given wood and mix it in with the glue to fill gaps. You 'wood' be a amazed how it blends flawlessly when filling any small gaps. I am sure you didn't need this trick but I thought I would throw it out there.
@iamGomer 5 жыл бұрын
I don't know why I was watching this until I saw the Tim Horton's coffee can being used. Nice work.
@rickhalverson2014 5 жыл бұрын
Buy a small CNC router machine for the copper work inlays. You may mix powdered copper (even gold or silver powder) with clear epoxy and do amazing inlays that always turn out perfect. As for personalized inlays; they really detract from the value... a better option is a paper label attached to the underside... custom manufactured for, material types etc. etc..
@menow. 5 жыл бұрын
"As for personalized inlays; they really detract from the value" Not to the person BUYING it. "You may mix powdered copper (even gold or silver powder) with clear epoxy and do amazing inlays" Doesn't look nearly as good as solid metal.
@steveh8724 2 ай бұрын
The value proposition for personalization of a commissioned piece lies with the person placing the commission, not the maker. So your comment on a better option is simply incorrect. This piece was not commissioned as an art investment opportunity with future resale as even a consideration.
@yurathejeweler 5 жыл бұрын
Very nice work. This video demonstrates multiple skills all in one, woodworking, wood finish, wood inlay, and jewelry making. Thank you for sharing your knowledge.
@mkivy 5 жыл бұрын
Beautiful craftsmanship!
@Carpenters_Canvas 5 жыл бұрын
This music is perfect , a quest with some dramatic twists, LOVE IT
@lizardfish3332 5 жыл бұрын
U got that rite !
@TheBradinator214 5 жыл бұрын
All of you who were rudely judging this guy's work with copper inlay or are thinking about it, think about what Bob Ross said, "as long as you're learning, you're not failing".
@florianerdmann2950 5 жыл бұрын
Nothing wrong with pointing it out tho.
@MyName-tb9oz 5 жыл бұрын
You're failing when you're charging someone $400 - $500 for a board that has a crap inlay and is going to have little green flecks all over it in a year or two. Yes, you're failing massively. I feel very bad for the purchaser. That lettering was utterly unacceptable at that price.
@TheBradinator214 5 жыл бұрын
My Name - If the customer loved it, which they did, then your opinion doesn't matter.
@MyName-tb9oz 5 жыл бұрын
@@TheBradinator214, we'll see how happy the customer is in a couple of years. And, regardless, it's preying upon the ignorance of the customer. This is what us old folks call, "immoral." You probably don't know anything about that.
@chrisclayton9224 4 жыл бұрын
My Name you really do need to chill out. I’ve worked for plenty of guys who live by the mantra “that’s good enough”, and it’s disgusting to me. This guy clearly did his very best. Maybe he could have spent some more time learning about copper inlay but it sounds like he also didn’t charge 5k for this piece either. If he was a scam artist and a thief he wouldn’t have busted out the 2000 grit sandpaper on a dremel just to polish the top of the copper. All of the steps he went through during finishing shows that he cares about the work he does and truly wants his customer to get the best possible product that he can make. For Christs sake man, you know he could have just slapped some oil on it and called it a day. I don’t know if you’re a woodworker or not but you KNOW that. So how dare you call him a fucking thief. Whatever is going on in your life to make you such a grumpy fuck, I hope it gets better. I genuinely mean that.
@katifontana9179 5 жыл бұрын
really awesome looking board.
@smokedragon4750 5 жыл бұрын
Absolutely gorgeous Chess table
@iiredeyeiiredeye1569 5 жыл бұрын
It's a beautiful thing...although I spotted a tiny break out splinter near hand hold, and watching you working with metal is like watching me working with wood. maybe you should give me a job doing the copper?
@MyName-tb9oz 5 жыл бұрын
Yeah. I saw that chip, too. Not acceptable for $400 - $500. No way. If you can't do the quality of work required for the materials you're working with you should stick to plywood.
@custa73burner 5 жыл бұрын
Anneal copper by heating it up and quenching it. (Ancient technique) Try it on a small test piece , it works
@godskiller27 5 жыл бұрын
collin Purvis that’s the interesting thing about copper, it anneals almost backwards compared to other metals
@TheWireEDM 5 жыл бұрын
Copper doesn't need quenching to soften, just heat. Quenching just removes the cooling waiting time.
@custa73burner 5 жыл бұрын
@@TheWireEDM when working copper, quenching greatly improves malleability
@TheWireEDM 5 жыл бұрын
@@custa73burner How did you measure this "greatly"? What I've annealed copper, there is no difference in hardness if the same temperature has been used, as the cooling does nothing to coppers crystal structure. It is always soft/malleable when a certain temperature is exceeded throughout the workpiece. The only thing the water can do is prevent oxidation on the surface or remove some of the formed oxide layer.
@custa73burner 5 жыл бұрын
@@TheWireEDM Measure the difference yourself by using two test pieces, heat and allow one to cool, then heat and quench the other. Planish both pieces and observe the individual indents, or measure them. Or, if you have the equiptment available, perform a brinnel test on both pieces.
@melenaenrique789 5 жыл бұрын
What a beautiful piece
@homersimpson9912 5 жыл бұрын
The Board looks incredible. I like it very much.
@debdottir 5 жыл бұрын
It's beautiful. 😊 I'll take your bird's eye stir sticks!
@ee04m047 5 жыл бұрын
5:14 the chess board is different than the final one. Here the last row/column is pasted wrongly. Two black and white side by side.
@LarsVision 5 жыл бұрын
I "saw" that
@LarsVision 5 жыл бұрын
But previously at 5:00 it's correct. must be using a "B" roll for editing
@cassyj6595 4 жыл бұрын
Yah I saw that too , I had to rewind it , thanks cus I thought I was tripping , hopefully he yells us something about that
@andrewreynolds2647 4 жыл бұрын
Great piece of work.
@chinaman1 5 жыл бұрын
My heart was pounding during the sanding and finger slotting part. it felt so exciting.
@PrincessTS01 5 жыл бұрын
that's much fancier than the one i made in high school
@andy4an 5 жыл бұрын
seeing the end piece at 5:10 makes me anxious
@Tbehartoo 5 жыл бұрын
That looks gorgeous!
@arthurkurtz2448 5 жыл бұрын
The craftsmanship, skill and creativity demonstrated here are superb. Questions here about the item's cost remind me of the time when I was a teenager visiting a craft show, and asked the artist how long it took her to produce a lovely but pricey acrylic painting she seemed to produce rather quickly. She glared at me and replied "Twenty-six years and 35 minutes." I walked away quietly, but never forgot the answer.
@Woodumakeit 5 жыл бұрын
Thank you so much! It definitely takes a long time to make something like this. Luckily I have other ways to make a living!
@TiborRoussou 5 жыл бұрын
My fellow Canadian, you do fine work. You sir, are as stringent as I am with my tile work! Beautiful workmanship, thanks for sharing :)
@unoman1999ful 5 жыл бұрын
cant see it along the comments but i thought id masnishon it as a metal worker. if yah want an easier time with the copper you should make it soft the proper way. wich is to dunk it in water once it is heaten up. unlike steel it dosent harden in quenching it actualy soften it. if yah leave it out to cool it usualy gets way hared to work with. but your work is very nice and realy impressive. thought id just give ya a tip since it seems you strugled a bit there
@abandonbelief 5 жыл бұрын
True that
@salpi23 5 жыл бұрын
Excellent craftsmanship
@axelyoung5877 5 жыл бұрын
Wow what a big job great job
@antigen4 5 жыл бұрын
the music made me spit out my coffee in laughter
@artstrology 5 жыл бұрын
I would have outsourced the monogram to a calligrapher and had it done in gold leaf. On the bottom.
@jakebogus5361 5 жыл бұрын
This was to be home made not out sourced. That's what commercial manufacturing does.
@steveh8724 2 ай бұрын
What about your mom? What would she have done?
@artstrology 2 ай бұрын
Probably the calligraphy@@steveh8724
@demo3456 5 жыл бұрын
very nice work. Im impressed
@vinceb9310 4 жыл бұрын
Beautiful Job MIke
@JLocke573 5 жыл бұрын
This soundtrack makes me feel like I need to put on a cape and fight some villains or something
@superglue46 5 жыл бұрын
Gorgeous board, but I gotta know... what about the seasonal wood movement? I'm kinda new to this, so there might be something I'm not seeing, but it seems to me that as the panel that is the checker board expands and contracts (probably expands since you made this in the wintertime), those miter joints on the absolutely gorgeous frame are going to blow open... I see you only glued in the center of the panel in the tongue/groove, but I don't see any allowance for expansion/contraction between the panel and frame. Am I missing a technique/trick? Cause if so, I'd love to hear about it, as I have a couple project ideas i'm trying to figure out. Thanks!
@roxannrousealvarado4645 2 жыл бұрын
No hard questions. Lol
@superglue46 2 жыл бұрын
@@roxannrousealvarado4645 I was either very wrong, or very right I guess haha
@donfillenworth1721 5 жыл бұрын
Wow, tedious work, but beautiful results! Thanks for sharing.
@MrSkeeter18 5 жыл бұрын
Thanks for sharing. That was a great project.
@555pontifex 5 жыл бұрын
Watching that copper work was painful
@RonaSpreader 5 жыл бұрын
only real issue i could find.
@allenpautsch2372 5 жыл бұрын
Complete cringe when I saw that
@bobpowers9862 5 жыл бұрын
Difference between a woodsmith (expert level) and a metalsmith (somewhat less) :)
@medendorpm 5 жыл бұрын
@@RonaSpreader 5:12 is a small issue too, look at the board.
@EyeOnTheTV 5 жыл бұрын
@@medendorpm lol I see it now. Then it's magically fixed at 5:28
@DannyPops 5 жыл бұрын
just when i thought i was getting good at wood working... I'll go back in my garage now.
@jakebogus5361 5 жыл бұрын
Lol it makes all want to do more.
@TiborRoussou 5 жыл бұрын
With enough time, you can master anything ;)
@carbon1255 5 жыл бұрын
A lot of the look of this is high quality wood, you are likely getting close xD Just takes a little bit of conscientiousness.
@immunosuppressor 5 жыл бұрын
Beautiful work!
@phickman7872 5 жыл бұрын
What an amazing work of art!
@willwade1101 5 жыл бұрын
I thought you were going to place copper between the squares of the board.
@SuperJonesVideo 5 жыл бұрын
Me too, that would be better
@weg5856 5 жыл бұрын
Without inlay: 10/10 With inlay: 7/10 Just looks untidy and doesn't go with the accuracy of the rest of the board.
@coolinken Жыл бұрын
Absolutely beautiful!
@alanwall7452 5 жыл бұрын
That turned out beautiful well done
5 жыл бұрын
At 5:11 you can see that the pattern is wrong! At 5:29 it's true again! LOL
@ruffriffing247 5 жыл бұрын
No that's a spacer
5 жыл бұрын
@@ruffriffing247 Count the fields (8 x 8). this is not a spacer but a checkerboard for the garbage
@futhaiter366 5 жыл бұрын
5:27 that board was wrong. Two times same field colors next to each other. Magically that is correctred in the next scene ;)
@tinderbox218 5 жыл бұрын
Good catch
@muzairanwar 5 жыл бұрын
😂😂👌
@DyslexicPlays 5 жыл бұрын
Seen that as well I was like "well he's fuck it hahaha"
@pandaDotDragon 5 жыл бұрын
I was looking for this comment ^^
@kimberlycaldwell4985 5 жыл бұрын
Well don’t you just feel better now for pointing that out to everyone. Goodness gracious.
@philipbyrnes7501 5 жыл бұрын
Thank you for sharing, I enjoyed your work and especially like the finish that you used. Very nice craftsmanship, thanks again, 11x👍🏻
@jakebogus5361 5 жыл бұрын
So peaceful. I love wood work.
@johnmontague69 5 жыл бұрын
Man.... All I can think about are weakening BISCUIT JOINTS! He obviously did biscuit joints to justify the existence of the biscuit jointer lol. 😃 Hey... Nice Job ☺
@clintcurtis9630 5 жыл бұрын
Whatever
@johnmontague69 5 жыл бұрын
@@clintcurtis9630 Seriously....? Why even say that? Hostile intentions by any chance?
@tinderbox218 5 жыл бұрын
How should it be done?
@Eddygeek18 5 жыл бұрын
The chess board looked gorgeous, but the inlay was quite disappointing
@jtee9548 5 жыл бұрын
Agreed, better without it.
@5979sid 5 жыл бұрын
Agreed! Should have used a font conducive to metal I lay
@MactacFPV 5 жыл бұрын
True. I don't know why he didn't fill the inlay after the metal was added. It makes all the difference.
@riomio7852 5 жыл бұрын
Yeah
@Tannerhasabike 5 жыл бұрын
Agreed, But you have to experiment and learn new things, just maybe not on client projects. A CNC would be a great addition.
@hockeyman2274 5 жыл бұрын
Beautiful work
@dirkg7062 2 жыл бұрын
Nice job! It looks beautiful.
@PsyMongazoid 5 жыл бұрын
So I've go to answer: I wouldn't try the copper insert. That lovely board is tempting though.
@gamercs21 5 жыл бұрын
5:05 the pattern is ok. 5:11 the pattern is wrong, then ok again at 5:30 - what happened???
@cincuriki 5 жыл бұрын
the board has two sides you know :D it was back side of the board when 5:11, i believe.
@gamercs21 5 жыл бұрын
@@cincuriki That wouldn't account for the pattern mismatch. It doesn't have anything to do with the orientation. Look again, and you'll see there are 2 walnut pieces next to each other, then they are back to the right orientation.
@mohawksminivans1750 5 жыл бұрын
gamercs21 I just figured he fixed it and didn’t mention it
@paulwyleciol3459 5 жыл бұрын
another, new kind of chess? Where the bishop does'nt get so bored ...
@Raul_Gajadhar 5 жыл бұрын
Good call!
@robertahubert9155 5 жыл бұрын
I'm sure your client was very pleased with your work. It's a beautiful chess board I know my husband would love to have one that was as nice as this one. Personalizing it made it that much more special.
@malgorzataryss8740 3 жыл бұрын
Absolutely perfect!
@shaunredmond3405 5 жыл бұрын
At 5:12 one end of the board is glued wrong
@eggfooyoung24 5 жыл бұрын
lol
@eggfooyoung24 5 жыл бұрын
Shallow router and copper wire with epoxy would have been easier and looked nicer
@JonPyzer 4 жыл бұрын
My thoughts exactly and I did exactly that 34 yrs. ago in building a beautiful sign for my father-in-law! Came out great and everyone loved it ... maybe I can dig up an old photo of it.
@eggfooyoung24 4 жыл бұрын
@@JonPyzer Nicely done :)
@fabriziodutto7508 5 жыл бұрын
Outstanding job!
@robertmorrison1751 4 жыл бұрын
Very nice work. Worth the time watching. Congratulation Mike.
@MucaroBoricua 5 жыл бұрын
You should have practiced the copper inlaying on a sacrificial piece first.
@hartshut 5 жыл бұрын
5:10 to 5:25. Do I get a prize for spotting it? I know you put that in the video on purpose. Happens to the best of us.
@Woodumakeit 5 жыл бұрын
You found it! I actually made several boards at the same time and messed up on that one. I decided to keep it in the video to see if anyone would notice. Good catch!!
@PawPawsWorkShop 5 жыл бұрын
It’s all good. That happens. Especially when you are videoing Love the video.
@Woodumakeit 5 жыл бұрын
@@PawPawsWorkShop Thanks! Yes, taking the time to set up the video shots can be really distracting sometimes.
@oqsy 5 жыл бұрын
21:16-21:40 different board without inlay? I can’t find the copper!
@Woodumakeit 5 жыл бұрын
@@oqsy That's the bottom of the board. You can see the finger slots exposed on the bottom.
@shitmonkey 5 жыл бұрын
I really like the inlay process
@amsch03n Жыл бұрын
Great video! Really appreciate including the tips and errors. As someone who's also experimented with copper inlay it can be quite tricky but worth the result!
Craft Masterpiece
Рет қаралды 71 М.
VovaLika Family
Рет қаралды 15 МЛН