Making a Cribbage Board with Inlays

Рет қаралды 15,051

Күн бұрын

In this video I make a cribbage board for my long-time friend who is turning 80 on July 12, 2023. We are going to drive up to Toronto and surprise him with it. The board is 18" x 5.25" (457mm x 133mm) made from six different types of wood, four of which are used for inlay. The board is made from highly figured quarter-sawn sycamore. The tracks are inlaid with walnut, cherry, and padauk. His initials are inlaid with ebony. The sixth type of wood is a piece of Madagascar rosewood at the bottom of the base.
The board has storage for a deck of cards and pegs in the detachable base. The cribbage board attaches to the base with concealed magnets.
If you don't know how to play cribbage, you can get an explanation of this and many other games @TripleSGames. You can watch his cribbage video here: • How to play Cribbage
You can find items I use in my projects at my Amazon storefront at www.amazon.com/shop/woodumakeit.
Grizzly G1023RLWX Table Saw amzn.to/2AGvqVV
Freud 24T Rip Blade with Flat Grind: amzn.to/2rQl9EY
Freud Ultimate Cut-Off blade: amzn.to/3KH2nWe
DeWalt DW734 Planer: amzn.to/3bV310O
SuperMax 19-38 Drum Sander: amzn.to/2DOWJzX
Mirka 6” Sanding System: amzn.to/3c0V7mJ
3M 220-grit sandpaper: amzn.to/2HOaQHA
Titebond III Glue: amzn.to/3BplaNF
Laguna 18|BX band saw: amzn.to/3GqI1Od
Laguna Resaw King band saw blade: amzn.to/3MkCxZ5
3M Hearing Protection: amzn.to/3nQLM9i
Delta Cruzer 12" Sliding Compound Miter Saw: amzn.to/3Mqylaw
Gator Grip push blocks: amzn.to/3KEhwax
Freud Super Dado SD-508: amzn.to/416JEsj
INCRA Miter Gauge: amzn.to/2HTzvef
Starbond CA glue and accelerator: amzn.to/3zGoJk4
Makita Trim Router: amzn.to/3MnQiWU
Freud 1/16" Roundover Bit: amzn.to/3mclQ7x
Amana 30 degree engraving bit: amzn.to/3CgZZjU
Amana 45611-K 15-degree engraving tip: amzn.to/3QobN9d
Extra long 1/8" end mill: amzn.to/3NIsI6o
12mm Neodymium Magnets: amzn.to/3PLXKNf
Rolio Mica Powder: amzn.to/46CxaME
Totalboat Epoxy: amzn.to/3kCUinK3M Hearing Protection: amzn.to/3nQLM9i
Gator Grip push blocks: amzn.to/3KEhwax
Hope's 100% pure tung oil: amzn.to/3piU62M
amzn.to/3D6NBDy
Chapters
00:00 Intro
00:23 Preparing the Inlays
12:00 Attaching the concealed magnets
14:36 Carving the pocket for the cards
16:10 Carving the ebony initials
17:31 Drilling holes for the pegs
17:52 Engraving with a laser
18:18 Chamfering the bottom
19:15 Cutting grooves around the tracks
19:35 Engraving the numbers
21:36 Filling "Start" and "Finish" with epoxy
24:15 Applying the pure tung oil
25:27 Photo shoot
Music provided by Epidemic Sound
00:23 Dordogne Peace II - Magnus Ludvigsson
03:48 Flourishing - Megan Wofford
07:12 As The Dew Dries - Martin Klem
09:00 Sonata In G Major - Johannes Bornlof
12:00 North Of Hope - Gavin Luke
15:32 Dahlias In The Rain - Jonatan Mollberg
17:25 Journey Of An Autumn Leaf - Atlas Kind
19:20 In Cruel Arms - Christophe Gorman
20:59 Traces - Ever So Blue
23:01 Beauty Of Kura - Vusal Zeinalov
#cribbageboard #cribbagediy #CNCwoodworking

Пікірлер: 57

@user-zg9uv5qs3v 16 күн бұрын

Beautiful work!

@Sebastopolmark 10 ай бұрын

That's a wonderful tribute to you friend and I am sure it was well received and appreciated! !! !!!

@gulfstream12 6 ай бұрын

I don't care what anyone says..... CNC doesn't take away from craftsmanship. As an up and coming woodworker that will start out by making cribbage boards, I now have a benchmark to strive for. Well done, sir.

@mikelacey9753 4 ай бұрын

I don’t know if I could bring myself to play on such an amazing piece of art! Such a beautiful piece! Obviously a VERY special friend!🤗❤️😎

@terristroh3965 10 ай бұрын

Cribbage is also popular in the Navy, especially submarines. My uncle, a US Naval officer in WWII, taught my sister and I as teens. Although he’s s gone, my sister and I still play. A few years ago, I cobbled together a few scrap pieces and made us a board with the playing field in the shape of a S for our respective last names. It’s several years old and has witnessed many a good skunking.

@rea59 10 ай бұрын

I may consider making one. Now days its hard to find someone to play with. Most who have never used a CNC have no idea how much time and effort it takes to make anything. Good job showing the time involved even if only the machining time and not the additional setup and programing time. I'm currently working on making a set of chess pieces on my CNC for a board I made using your board building process.

@Woodumakeit 10 ай бұрын

Are you using a fourth axis to do that? I'd be interested to see how they turn out.

@demmertp 10 ай бұрын

My hometown is Chicago. My grandfather taught me how to play cribbage. We used a cribbage board made for him by the carpentry shop at the steel mill where my grandfather worked, inspecting and later selling wheels for railroad freight cars. It was made out of cherry and of had very simple track design. Our pegs were cut off nails. Your design is quite elegant and I loved the sycamore grain pattern.

@Woodumakeit 10 ай бұрын

That's a great story. We lived in Chicago for six years and loved it!

@littlejoe1st 10 ай бұрын

Mike do not worry about what others say about woodworking. When the hand saw / table saw / skill saw / band saw came along everyone said the same thing "That is not wood working because you are not using your hands". As with every industry /craft that is out there when time progresses forward new tools come into play to make it just a bit easier.

@Bitwise1024 10 ай бұрын

"It's also popular in Canada..." Can confirm. So many wonderful memories of playing this awesome card game with friends and relatives. What a thoughtful gift, man. That's not a cribbage board...that's a work of art that can also be used to play cribbage. First rate work, as always.

@Woodumakeit 10 ай бұрын

Thank you so much. I grew up in Canada, so that's how I got exposed to the game as a child. It was a pretty popular game in our family.

@David-fv7zg 10 ай бұрын

Beautiful work. If that's all it takes is 30 years of friendship to get one of these, can I start the clock now? LOL. I love playing Cribbage, and this is the nicest board I have ever seen.

@Lutzboater 10 ай бұрын

Outstanding work!! I'm sure he will cherish this board and think of your kindness every time he uses it. Beautiful !!

@customcraftsbybruceslaton4872 10 ай бұрын

YES, I would make it! I played Cribbage in my youth!!

@andrewupson2987 10 ай бұрын

I don’t play cribbage but if someone made me a board like that I’d learn! That’s beautiful. I wouldn’t make it mostly because I don’t have a CNC. But if I had a CNC, and had a friend that enjoyed cribbage I’d make one for them.

@coreuped 10 ай бұрын

That is a great gesture and amazing work. If I didn't have family from Maine and visit with them ever since I was young, I would never have known about the game.

@richs5422 10 ай бұрын

Wow! That's a lot of work. Beautifully done.

@BradPow 10 ай бұрын

West coast Canadian here, and every kid grew up learning to play crib

@paulrcreech7731 4 ай бұрын

Nice

@clarkriccobuono3903 5 ай бұрын

That is unbelievable beautiful. Wow

@darceyweimer3171 3 ай бұрын

Beautiful...but..wow..lot of work.👍

@MASI_forging 10 ай бұрын

Outstanding workmanship 👍👍

@Zach_Handle146 9 ай бұрын

I’d buy it haha

@MCsCreations 10 ай бұрын

Truly amazing work, Mike! Beautiful project!!! 😃 Stay safe there with your family! 🖖😊

@robandsharonseddon-smith5216 10 ай бұрын

That is a kingly gift indeed.

@johnbarlow6546 10 ай бұрын

Magnificent - no other words

@AndrewR74 10 ай бұрын

Outstanding work! You just raised the bar for cribbage boards, that’s for sure

@Bagual133 10 ай бұрын

Good job. Don't knew Cribbage...!

@gpanizzolo6090 10 ай бұрын

Felicitaciones!! Realmente es una obra de arte! Solo un maestro puede hacer ese trabajo! Muy bueno! Sin duda vas a sorprender a tu amigo con ese trabajo. Por estas latitudes no se conoce el juego, así que voy a ver de que se trata. Te mando un fuerte abrazo desde Lomas de Solymar, Uruguay. Germán.

@357Gaz 10 ай бұрын

un gran trabajo!!!...

@DelugeQuebec 10 ай бұрын

Wow... Just amazing woodcrafting skills... Can I be your bestman too please ;)

@Woodumakeit 10 ай бұрын

😂

@dpmeyer4867 10 ай бұрын

nice

@shanmcarthur 5 ай бұрын

That is amazing craftsmanship and an awesome video. Great job on both. You didnt list your CNC ma hine nor the software you used. Love it! I cane from canada and have family there too. I want to make a few boards for them.

@Woodumakeit 5 ай бұрын

I have a Laguna IQ that I bought four years ago. They've changed their model line-up, but I think it equates to what they now call their Creator Pro Desktop CNC Router. I use the Vectric VCarve Pro software that comes with it. Good luck with your projects!

@shanmcarthur 5 ай бұрын

@@Woodumakeit that is still the best cribbage board I have seen yet. Would you be willing to share the VCarve files?

@ericluba6287 10 ай бұрын

My dad would play every weekend with his friends for money at an old small store

@LauraMerchant-wm8ms 4 ай бұрын

Question: Why do you insert 2 magnets into each hole? I am about to make my first board with storage and I am researching how to place the magnets correctly. This is a beautiful board! thank you for the great details!

@Woodumakeit 4 ай бұрын

I doubled up the magnets to increase the attractive force. When I tested with a single magnet, it didn't seem powerful enough to hold together. A larger diameter would have worked too.

@Finewoodworkingofsc194 10 ай бұрын

A great gift for a lifelong friend. Well done, Mike. Can you tell me which Laguna CNC you are using in the video? Laguna IQ?

@Woodumakeit 10 ай бұрын

Thanks for the comment! Yes, that's a Laguna CNC that I have. When I bought mine back in 2019, they had the Laguna iQ and the Laguna iQ Pro. I just checked their site and it seems like they only have the Pro version but they've added a new "Creator" line. I'm not sure, but I would imagine that mine is equivalent to their Creator Pro model.

@jakeashline852 10 ай бұрын

That’s the 29 of cribbage boards Mike!

@Woodumakeit 10 ай бұрын

I still remember the first time I scored 29. I was like 13 or 14 at the time and it was amazing!

@bobmonday925 9 ай бұрын

Have you gotten the rotary axis for your cnc? This would be perfect for making chess pieces

@user-xr4td8cw1w 9 ай бұрын

Hi Mike. Beautiful work! Out of curiosity where do you buy your wood??

@Woodumakeit 9 ай бұрын

I live in Virginia, so I get most of my domestic hardwood at Northland Forest Products and C.P. Johnson Lumber. For exotic wood, I go to Exotic Lumber in Annapolis.

@user-fn2qf6ps9w 6 ай бұрын

Question : What is the hole spacing ? I first learned to play cribbage while stationed on board the USS Northampton CC1, which was home ported out of Norfolk, VA. Not too far from you. That was in the '60s. (fine kindling)

@Woodumakeit 6 ай бұрын

The holes have a 1/8" diameter and there is a 0.1" space between them (0.225" from the start of one hole to the start of the next hole). Norfolk is not to far away! We've been there several times.

@SomeDudeOnline 10 ай бұрын

In my experience, the slower you move with a router bit, the more it's going to burn. I'm also pretty sure I've heard this elsewhere as a typical thing. However, CNC machines are always very slow, right? How do they avoid this burning issue?

@BarryBirther 7 ай бұрын

Hi. Thanks for the video. What model Laguna CNC machine do you use?

@Woodumakeit 7 ай бұрын

When I bought mine, it was called a Laguna IQ, but it looks like they've changed their model line-up. I think the one that I have is fairly close to what they call their Creator Pro Desktop CNC Router.

@BarryBirther 7 ай бұрын

@@Woodumakeit Thanks very much. You do fine work. Keep it up!

@WintelTech 7 ай бұрын

What was the flat depth of the vcarve tool path that you used for the male and female inlays?

@Woodumakeit 7 ай бұрын

For the female portion, I used a flat depth of 0.12". For the male inlay, I used a start depth of 0.08" and a flat depth of 0.04". I almost always use those same settings when I am doing inlay.