One of the most precise and well-made how-to videos I've seen in awhile. Thank you for taking the time to make this!

Thanks for taking the time to show how to do this. Just got a 2012 Cruze and need to replace the bumper.

Thank you for a very well made video. Clear views, clear explanations, even "what to look out for" tips with ways to avoid damaging your car. Maybe a little too much time watching you take screws out but over all really well done. Thank you.

Thanks for this tutorial. I have a Chevy Sonic and want to replace the horn. This gives me an idea of what I have to deal with. Subbed!

Note: similar to Chevy Trax bumper! Thx for the great pointers on how to avoid breaking the side tab clips!!

You made a great video, you gave me all the information I needed. Even with helping know which tools I'll be needing. Thanks

Excellent instructional video. Seems pretty easy after watching it. Thank you.

Great video. In the cross 2013 is this same process done to disassemble it for shock?

Thank you. You saved my life!

Thank you! You did a very good job at explaining the steps. I tried to follow Spyder Auto's version however they missed a lot of steps. i.e. The clips on the side... you said told me they were there AND EXPLAINED how to unclip the bumper. however other videos on youtube did not even show me there were clips there. They just enscrewed the T15 screws and then just simply took off the bumper.

You are not the only one but you are the best ...... well done.

good video, for pics i used one with small curve to push down on black tab then straight small pick to pull up on bumber tab n came off very smooth with no damage to bumber, thanks

Parabéns pelo vídeo e pelo cuidado em não produzir danos à pintura ao remover as travas!

Excellent explanation with this video I can remove my chevy cruze bumper.Thanks

2:05 to 3:55 is really good info on how to get to your car horn if you're only interested in replacing the horn without removing the bumper. Be sure to mind the front temp sensor.

Thanks for all, you are amazing.

Very Helpful Thank You!

Thank you. Very helpful

Very good video and great tips. Good job.

Hi Mate, thanks for sharing, much appreciated.

Hey happywrenching. Great video with clear instructions. I have a question I'm hoping you can help me with. Is it possible to remove the bumper cover without the use of a jack? If a jack is required, can I just use the jack that goes with my spare tire or do I need a better one? I'm trying to replace the headlight covers on my 2011 Chevy Cruze LTZ. Thanks.

Thanks, very helpful

Fantastic job!!!!

Very helpful

Thanks for your works. That help me with my cruze. It`s helpful video, subscribe your channel

Would you happen to know the name of the tool needed to remove the clips under the headlight and by the fenders? Im installing white LED behind my grill

Can you possibly make a video on how to change the front bumper cover on a 2012 Buick Verano?

Is it the same or similar process for the 2010 cd model?

This video helped alot

thank you please can you make video for cruze with VCDI engine thank you

Hey bro the air temperature tester where do I get that to buy do u have a link

Konustugu dili anlamama ragmet mukemmel anlatti tesekurler

Hey I have a question my side marker broke off because I hit a gas tank that fell off someone's car while driving, I was able to buy the side marker for the drivers side but the male portion of the cable ripped off, is there anyway I can replace that or something

Thank you

Can someone post a picture of the ambient air sensor, its location and what the wire connector looks like. I dug into the area of the front left bumper yesterday. Couldn't find the sensor but there's a wire connector floating around.

What size were the first 2 bolts?

Is there a way you can show us how to change the headlights on a 2017 Chevrolet Malibu?

to replace the radiator on this cruze do you need to remove the front bumper?

Thanks bro

hi. how to install mesh behind grill to protect the radiator for malibu mk8

I'll be removing the front bumper on my 2012 Cruze Eco on Sunday, installing projector headlights and HIDS. Really hoping I don't brake those stupid tabs by the wheel well. Seems poorly done if you ask me.

Do you really need to remove the battery terminal when removing the front bumper, just thinking maybe the computer will be reset if I will remove the battery terminal.

At the 3:05 mark How do you get the 4 push pin clips back in? Ive been trying for a full day 🤦‍♂️

Are the clips on the sides called the front bumper fascia? I wrecked my car and I’m replacing my front end but I think I’m missing clips!

i like content creator that use audio from the video when removing certain things so you can hear if your breaking it or not

Hi happywrenching. Do you happen to know if you have to remove the bumper to get to replace the fog light bulbs? Or is it possible to replace them without removing the bumper?

is there a way you can show how to replace the fender on the chevy cruze because I'm catching he'll trying to attempt on my own

THANKS !!! YOU ROCK !!! SCHPAY !!!

Thanks bud!

Any tips on fixing broken tabs?

Can u replace horn by just removing bottom cover, my daughters horn stopped working

Does the 2015 RS/LTZ front bumper fit on the 2015 LT?

I need to replace the whole headlight assembly on a 2015 Cruze. Do I have to remove the front bumper

Does anyone have a video for a 2016 volt. My washer fluid pump isnt working. I cant believe I need to take the whole pumper off for this

is it possible u help me out of buying the front bumper for 2015 chaverolet impala and it's black..I tried find it but I have no idea which stuffs to buy..hook me up bro I need to change my front bumper which was damaged last week

howndo i imstall the new bumper retainer that the bumper snaps into netween the lights

I have a 2016 Cruze with the RS package. The horn on this car is pathetic, and I would like to replace it. Is it necessary to remove the whole front bumper, or can I get in from the bottom by removing the bottom splash cover for replacement?

How to install just the grille front bumper only

جميل جدا

Video makes it seem much easier than it actually is 😂

Cool

what is labor time to remove bumper and install? Thanks in advance

Чётко

Hi. Can you do video like this,but for Cruze with RS package?

I need to do the same but with Chevrolet Orlando. Do you know if its exactly same like in your video? I am trying to fit front parking sensors

Can this be done without a jack?

any solution for broken tabs?

Hi, Thank you for posting this video. Is there any way to change the grille without removing the bumper? Could you send me link for that?

So funny story, I was installing my foglights (hadn't done it before and I just followed the instructions) ended up not being able to do it properly because I couldn't get the bumper off without breaking it the tabs, I broke one tab on the driver side trying to figure it out (now I find this video) so I took it to the dealership, who managed to get the bumper off, but they broke all the tabs, all of them, getting the bumper off. So they replaced the bumper "free" of charge but dinged me for $500 for installation... It should have been a $230 job which is what I was quoted.

Hello Happywrenching, I'm writing a blog on removing the radiator. The underside of the front bumper is damaged so I would miss several of the steps that you show here. can I post a link to bring my readers here to your video? All credit for your great work will definitely be given to you.

Anyone know the GM number for the bumper?

hi thank you for the video. where can i buy this replacement bumper?

Круто

I was going to make a video but better to just refer back to this one.

Where can I buy a front bumper?

I can’t get my front bumper to line up

I saw a video of some dude straight yanking that bumper and didn’t break a single clip

It's what you get when cheap parts are used, as to why the clips break.

what a pain the in ass, thanks for this video! now i know what to look forward to =) haha

Can an 2011 Chevrolet Cruze bumper come loose with out anyone tamper with it?

So 35 minutes or so?

that is my car

And I thought my Malibu was a pain in the ass to replace the headlight. This looks even worse. Why did they design the cars this way?

Un breathe yourself

POS car

😉👍👍👍🤝

Thank you

Thank you