Best video out of all 5 I reviewed, spot thanks for doing this for all of us Miluso!

Damn man that was the best “how to” video I’ve seen.

I HAVE A 07 Chevy Impala 3.5 camshaft position sensor is in the same place! Also I had to undue a 13mm bolt aside from the 3 on the pully to lift the power steering pump out…it’s actually a bracket that holds down the power steering pump hose I couldn’t pull it out without taking that bolt off as well. For reference watch a power steering pump replacement video if you have a engine like mine

Thank you for this video. I was able to follow your well-made video. The power steering pump sure gave me trouble. I had to unscrew one bolt from the alternator thing in order for the steel lines to clear and finally was able to move the power steering assembly thing. 2003 Chevy Impala 3.4

Nice video! I was fighting a electrical issue... Turns out it was the connector on this sensor. Bad design flaw having the pump sitting on this sensor.

Appreciate it. Should help me navigate the engine bay in my 02 impala a little better.

Hey i just wated your video helped so much even with anxiety i was having over this job nice how you got those shots of the aemsor broke the clip myself thanks for taking the time ro video this

4:33 had me cracking 🤣 thanks for the video it helped 👍

What were the symptoms that made you replace sensor

Thank you for this.

Will a bad Camshaft position sensor cause "engine power reduced " to read on the dash and the car to rough idle and run like it's misfiring? If anyone can help that would be awesome. Thanks

I doubt it’s different but I have the 3.9l with the intake manifold that looks similar to the 3.5L will it still work

Didn't look to bad. Thanks

I just tried to do this. It a 10mm not 8 unless a different model has a different size bolt for the sensor

what was the car doing that you had to replace this? any codes?

Great video bro.... I was dreading doing this, but no worries now... THNX! Will do it tomorrow! Question.... I have had the P0011 code and it was running OK, but that's why I got the new sensor and am replacing.... But I got my oil changed yesterday and now it's also throwing a P0303 Cylinder 3 misfire and running rough.... Any ideas? I am hoping replacing the sensor clears it all up.. Thanks Again for the vid!!!!

What do I use to get the plug out

I have 06 Malibu ss 3.9L code P0010 replace VVT code cleared for a day came back any idea if this will help?

Is this for bank a sensor 1

Do you gotta push it down really hard?

all the impala connectors brake MOST of the time, even on 5-7 year old vehicles😒 it all gets britL & Ant the bSt plStic👋

That was perfect

Will this work for engine 3.5l v6?

Great Vid Bro

How many cam sensors does the impala have?

Will this work on my 2008 Impala SS?

Can that make your car shift wrong and jerk

i think this is why im getting p0164

Wait....is this really the CRANKSHAFT sensor or the CAMSHAFT sensor?? They're different...

Pause it pause it

I wouldn't use that dura last crap. Stick to ac Delco. Last longer.

Oh hate doing that belt off and on there uhh' again...