Chevy Equinox: Engine Light On P0010

Chevy Equinox: Engine Light On P0010 - Easy Fix

Рет қаралды 171,805

Жыл бұрын

In this video I bring you along as I have a look at a customers Chevy equinox with the classic P0010 Intake cam position solenoid control circuit. It is a very common issue on the GM 2.4's
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 599

@IsItTrueThat Жыл бұрын

Eric, would love you to do a video listing engines to stay away from. What is common knowledge to you (the 2.4 burns/leaks oil) is unknown to most of us. It would be a real service. Follow it up with a list of good engines. Obviously, it would be your opinion but a lot of us would value your experienced, opinion over a used car salesman's assurances (quite the high bar you surpassed).

@shanestrains2849 Жыл бұрын

This would make a great video, I’m sure he has a lot of knowledge on what to avoid and ones to consider

@jeremyt7722 Жыл бұрын

Agree, although not the engine, the Nissan CVT reputation has me on the fence about getting one, curious if they got more reliable.

@orbitalair2103 Жыл бұрын

The engines are a disaster they have 4 major internal flaws with oil and you can only ever fix 2 easily. It blows thru oil and then the low oil sensor often fails too. Avoid these engines at all cost. A coworker even says it's often impossible to read the dipstick either. One day is fine, next day it's dry.

@robertweinmann9408 Жыл бұрын

I've got a 2.4 in my 2010 Malibu, and at almost 200k, it only uses one quart between oil changes. No leaks at all yet. I'm a bit obsessive with maintenance, so I'm sure that helped. Synthetic oil changes every 5-6k.

@yotajeff68 Жыл бұрын

Viewers should notice what Eric works on and what he drives

@jaycarrUK Жыл бұрын

You're spoiling us with these regular uploads, may they continue. Respect from England.

@soxplayer3907 Жыл бұрын

More bread!! That'll be a haypenny sir....no more bread!...

@Jw20000 Жыл бұрын

@@soxplayer3907 what are you going on about mate? 🤷‍♂️😂

@soxplayer3907 Жыл бұрын

@@Jw20000 it's the scene where scrooge is in the pub eating grub I know it has absolutely nothing to do with the subject at hand but oh you silly Brits.....

@Jw20000 Жыл бұрын

@@soxplayer3907 oh I see, I'm not familiar with that particular line myself 😂

@GoTechTraining Жыл бұрын

Hey Eric! Thanks for the shoutout❤. Great vid, as always👍

@danfarris135 Жыл бұрын

This is the only job that I have done in the last 5 years that was actually a pleasure to do. No muss, no fuss and not a single shout of anger to my maker. I wish all jobs would be so easy.

@robertheinkel6225 Жыл бұрын

Over the Thanksgiving weekend,my daughter drove her Cobalt from KY to FL. Engine check light came on about halfway south. She checked the oil and pressed on. Once she arrived, I checked the car over. Walmart recently did an oil change, and left the oil cap loose, and the drain plug loose. It took 3.5 quarts of oil to get it to the normal range. I fixed the two issues, and cleaned the engine bay. No issues on the return trip.

@terrybrewer4296 Жыл бұрын

Cam solenoid valves are very common on those. Most of them fail due to low oil level caused by excessive consumption from stuck piston rings. Low oil level usually causes damage to the timing chain guides as well. If you remove the solenoid valve, check the screens for debris. My advice to my customers with this engine is to check the oil regularly and change it more frequently than what the oil life monitor calculates. A word of advice, if you cold start this engine and you hear a rattle for a few seconds, the oil level is most likely low. The noise comes from the cam actuators having to prime up with oil. I have 135k miles on mine and I change the oil every 2,500 - 3,000 miles, and that's after I've replaced the pistons. At that interval, I expect the oil to be about 1 quart low. GM spec for expected oil consumption is about 1 quart for every 2,000 miles, and that's for all of their vehicles.

@JackdeDuCoeur Жыл бұрын

Hmmmm, frozen PVC drains engine oil - good thing it never gets cold anywhere in GM's market areas, right? Nice work

@bearing_aficionado Жыл бұрын

Oh we are blessed to hear the boss, Mrs. O

@kc360awareness Жыл бұрын

Thanks for always giving the shoutouts to other channels. Classy and respectful.

@mrkttrdr2919 Жыл бұрын

luv even the simplest fixes, shows that u dont have to go down a rabbit hole on every fix, thanks for posting

@jonnyrockets4756 Жыл бұрын

Your are the best. I'm trying out a new shop this week for a persistent egr issue, I pray he's as good as you. Keep up the good work.

@jimclifford1241 Жыл бұрын

Love "the routine stuff" Eric. I'm always learning something.

@tracydiller9378 Жыл бұрын

Great video Eric O. as always, everyone have a great weekend.

@jamesbruno5896 Жыл бұрын

Just did a set last week! Nice job Sir!

@LesReeves Жыл бұрын

Without this type of work & general services are your bread & butter so to speak that pay the bills & keep the business in the black .Cheers Eric keep the vids coming you do all we viewers a great service.

@bigrockk2980 Жыл бұрын

Definitely routine for you but not so much for a lot of us, still interesting and I learned something about the big Chevy 2.4, thanks!

@PaulysAuto Жыл бұрын

The simplest things and the simplest suggestions and tests you make are ABSOLUTELY the most valuable. I always enjoy your videos, even when they seem to you to be the "routine"; because you are putting out accurate information about how the system works and what to look for. Moreover, you're devotion to doing a good job everyday Eric, is greatly appreciated more than meets ones eye; so keep up the good work man and God bless 🙌 🙏

@pfsantos007 Жыл бұрын

Hose pliers like the one you used to pull the solenoid off. Bought a set of three with different sizes. One of my favorite tools now.

@DJ-gz6ww Жыл бұрын

Our Equinox was a victim of the old PCV freeze up. Prior to her demise, it was actually 121,000 miles of trouble free driving. Only routine items and the above repair. Some of them had issues with the high pressure fuel pump as well but ours didn't. Love the channel!

@playhooky Жыл бұрын

My daughter has a 2012 that had that problem plus a bad timing belt all fixed just 2 months short of 2 years ago. It started giving her trouble again a few weeks ago & the timing belt is bad again. I don't know much about cars but have never heard of a timing belt going bad twice on the same car let alone one that was replaced less than 2 years ago. Dealer said it wasn't covered under any part or repair work warranty. She refused to pay to replace it again & I agree. She bought a different car & is going to try to sell the Equinox as is. Anyone have any other advice for us? We actually are good friends of the family with 1 of the main mechanics at this particular Chevy dealership & trust him, but it just doesn't seem right. We know/found out after the 1st time that the '11s & 12's had infamous problems with timing belts, but shouldn't them replacing it & fixing things have lasted much longer than 2 years???

@dmakk861 Жыл бұрын

You need to be rewarded with an easy one now and then

@barry8462 Жыл бұрын

My sister has an Equinox with the big 2.4 in Florida. Pcv got clogged up and it puked the seals and gaskets and then the oil! Love your videos Eric!

@brandonlavender851 Жыл бұрын

I'm a master certified mechanic down in Tennessee. I enjoy watching your jobs brother! Keep up the good work

@graymanwalking Жыл бұрын

Been watching your videos for some time and really enjoy and admire your approach. You have the mindset to find the root problems and succeed when others fail. I bet you've heard it many times, but all shops should be run by someone with your skill and attitude. Also enjoy that you include your family. Good luck in the future.

@mattbrown5511 Жыл бұрын

Routine diagnosis and repair are the mainstay of a shop. Also, I find it interesting. Just keep doing what has gotten this far and you'll be just fine.

@buffystclair9042 Жыл бұрын

Was cross border shopping just b4 Christmas to Port Huron , about an hour from London Ontario,where I live. Im retired mechanic but still work on some friends cars. So , while I was shopping, this guy with his 2017 equinox called about light on and rough running after buying cheap fuel from Indian reserve. Since I didn’t answer cause Im cheap to pay $12 /day roaming he took it to dealer. They recommended both sensors like you but only had the P0010 , $500 Canadian later ! Thank you Finch Chevrolet. ….. I have also found when had time to gain more knowledge, looked closely at those sensors and found filings and crud on the screen

@Wildturkey10121 Жыл бұрын

I have the '12 Equinox with the big 2.4 in it and had the same oil usage issue but there was a recall on it and they did a top end rebuild on the car, then on the way home a couple of sensors failed, probably the ones you just replaced, but we took it back and made GM pay for the sensors and has been pretty good since then. No oil usage issues, and has been running good ever since. I think the only thing I've gotten codes for were O2 sensors which was simple enough. I have to thank you for using Autel diag computers, because of you I bought one, and I need to go plug it into my 98 ford truck, but it has been a great help to have on our older cars so I don't have to pay for the updates which are crazy expensive. I have 2 cars in the family that have that engine is why I bought mine. It isn't as fancy as yours but still pretty high end, probably about what you were using several years ago.

@Codadams Жыл бұрын

Thanks for the video, I know you feel that some of them are monotonous but I enjoy watching and they are informative. I feel half way informed when people say I have this problem - I am like I know a guy! He says if he can do it you can do it!!! Haha. Either way love the videos keep them coming.

@brianv5344 Жыл бұрын

Hi Eric. Just one tip I've picked up from doing hundreds of those. When removing, notice there is a little space under the solenoid bracket - You can use a 90° pick and pop them straight out, bolt still sitting in bracket 👌 thanks for the great videos 🍺 cheers

@malibuStroker Жыл бұрын

Great video! I appreciate the explanation of how the logic works on these cars

@pitchforkpeasant6219 Жыл бұрын

496 stroker. Krikey. Still drive it on the street?😁. My 69 malibu has a problem with the eaton posi and c clip eliminators trashing axle tube seals☹️

@mavicaerials8825 Жыл бұрын

I have a 2009 Malibu with 2.4 liter and have 432,000 miles on it. The only oil leak I battled was after I changed the CAT/Manifold and shortly after the head cracked. That caused a big oil leak. I had to install a new head. Other than that, it was just general maintenance and also a couple of Cam Solenoids. 2009's were not oil burners, that started with 2010 with direct injection where GM also installed lower radial pressure Piston Rings to reduce drag to improve MPG. It was a dumb idea and there was a TSB for it but they wouldn't stand behind it and recall it. That caused the oil burning problem, particularly at around 100,000 miles. As always, the huge key to success is using full synthetic oil and changing it every 3500 miles. Frequent Oil changes are cheaper and less troublesome than needing to replace an engine. Most people don't seem to grasp this truth along with that they never check the oil level and keep up with it.

@nodak81 Жыл бұрын

I've had good luck with NGK branded solenoids as well. I replaced them both in my HHR and they've lasted over 100k miles so far with no problems.

@charlesporch5516 Жыл бұрын

Nice work Eric!

@rickconstant6106 Жыл бұрын

Sometimes an easy one comes along, so just enjoy it to make up for the nightmare jobs. Happy New Year from England

@microstorm Жыл бұрын

If you, instead of tapping the screen, hold your finger for a tiny bit longer, it is much more likely to register your input. They have a delay time to help stop accidental touch. Great vid.

@mikecalvin1402 Жыл бұрын

Another happy 😊 customer

@stationaryenginesworldwide Жыл бұрын

Great video again from SMA...thanks Eric for showing us the 2.4 boat anchor😂

@charliekeene2003 Жыл бұрын

I had to change those out on my wife's '16 Equinox a couple of years ago. I regularly check the oil and I must say it's always good. It's got over 80,000 miles on it, and it doesn't burn oil, not yet anyway. I've heard some horror stories, but, as I said, it's been good so far.

@ramongonzales1631 10 ай бұрын

Thank you Eric o I was able to fix my equinox and verify with a test

@seamasrigh2162 Жыл бұрын

Thanks Eric for the "click" fix. It's been tough with Rainman tearing his building apart.

@billsmobile829 Жыл бұрын

Good morning Eric!! I'm glad you mentioned the NAPA solutions issue. I ran into the same thing when I replace the transfer case motor on an Explorer. That's when I finally found out that the "solutions" line of NAPA parts are actually Dorman! Fingers crossed. I went ahead and installed it and it worked fine but it's always a crap shoot when it comes to Dorman electrical parts. I enjoy your videos every week!! We keep doing what we're doing because we love what we're doing!!

@shanestrains2849 Жыл бұрын

With Dorman you either get defective or just shy of defective

@dmaxdiesel4x4 Жыл бұрын

I've done these super easy! 👌 like a 15 minute job tops.

@richardthomas1743 Жыл бұрын

Happy Friday Eric!

@leoszwiec3006 Жыл бұрын

always very interesting. thanks

@gregorylewis8471 Жыл бұрын

Frozen PCV line and all the oil goes away. GM just does not know how to NOT SUCK! 😱 Great video on the Equinox Mr. O! Thanks!

@upptowne 6 ай бұрын

It was an easy one. But now I know how, it will be easy for me. Thanks

@lyndonsia5868 Жыл бұрын

A master of his profession.

@clintprice2123 Жыл бұрын

Mrs 0 is such a perfect partner to have, you said something and then said correct and she agreed. If only mine ever agreed to anything. Eric, you are absolutely a blessed man! May 2023 bring you continued success, good health and happiness.

@charleskeenom9481 Жыл бұрын

Thank you Eric good to know

@imranghani2982 7 ай бұрын

Great video made it so Ez Pz job to fixed my car problems

@robertyoung534 5 ай бұрын

Thanks my friend you helped me and showed me what i have to do on my Chevy equinox thanks so much 😁

@robertyoung534 5 ай бұрын

Is it safe to drive to the shop to see if it is the problem

@fraserkirk1069 Жыл бұрын

Happy new year buddy :D Am hopin to make it out to New york some day, I can come give you and Josh a hand :)

@gflores7018 Жыл бұрын

Another good video Keep it coming Eric O

@russellstephan6844 Жыл бұрын

My mother's Equinox was having a solenoid code. She's 2,000 miles away from me in Las Vegas. I told her to take it to a Pep Boys, request OEM parts, and bypass the serious wallet assault of the dealer. After all, it is such a simple job. But, Pep Boys quoted her $550 in labor alone to change the two. Boy did I rip into the service writer upon hearing that estimate. I ended up driving out there for visiting and correcting the issue. With a couple of ACDelco replacements, I had mom watch over my shoulder from the moment I opened the hood to the start of the test drive -- 15 minutes. She goes, "Is that all there is to it? Boy, they really are trying to rip people off." Yep.

@zeuscarver3112 Жыл бұрын

Thats almost dealer pricing. The problem is the "book time" is 1.5 for each solenoid. Which makes no sense for something this fast. Basically paying for 3 hours to do a 10 minute job.

@russellstephan6844 Жыл бұрын

@@zeuscarver3112 Yeah, and this was on top of the one-hour diagnostic fee... And you're right, they calculated book time X2. Utter BS. You're already in there for the one. Scumbags, trying to clean out an 80 year old woman...

@jamesfitzgerald2361 Жыл бұрын

Older cadillacs had that blower down in the wheel well on the drivers side for emissions. It had a big hose up to the engine and it would fill up with water then rust out the blower motor. What a great invention.

@awallace2103 Жыл бұрын

Happy new year Mr O,hope you n your family had a good one 👍 wish all good health in the new year 😀

@billupstateny9151 Жыл бұрын

Another positive result 👌

@josephkimmel3602 Жыл бұрын

Eric I have officially adopted the term The Peoples Republic of New York. As a downstate businessman I can't think of a term that most perfectly Identifies our state.

@heatherd212 Жыл бұрын

🇨🇦 great video as always

@davidbarrera308 Жыл бұрын

I replaced these same parts on my wife's 14 Equinox back at around 90k miles. We are around 123k miles now. What's the life span on these parts? I had no idea about the "engine killer". Hers is garage kept all year round so hopefully that helps from anything freezing. The problems we have had with our Equinox was these parts, a battery, and tires. The tires got us over 100k miles out of them and we used the best one from the original bunch as a spare tire. The tires are Michelin. It's crazy how people don't check oil. Thanks for the videos. Keep them coming. Subscribed a long time ago.

@slashermcgurk2191 Жыл бұрын

Thanks Mr O, talk about good timing. Over in Scotland guess who’s Vauxhall Astra with the 2L variant of this engine threw a P0013 today 😅 Thank you sir for the personal video 😂

@pomz3604 Жыл бұрын

Hey Slasher, they used to sell Vauxhall here in Canada. In fact my first car was a 1965 Vauxhall Victor. It was a real piece of junk, could barely do 60 mph, but I loved it 🤣🤣

@tysanderson3405 Жыл бұрын

Nice tip on the 3 starts!

@rogerchevelle8543 Жыл бұрын

Great video Eric O. Have a good friend with one of those equinoxes.☹️

@reinovator Жыл бұрын

I know it's Day to day, been there, Thank you. I stopped just before OBD2 became the norm. I went back to body repair.

@robertweinmann9408 Жыл бұрын

I had to replace a vvt solenoid early on in my 2010 Malibu. Same engine. Only aftermarket choice at that time was Dorman. It's still working fine at almost 200K. I've had no issues at all with this engine. Just minor oil consumption. Even the water pump is original. I guess I'm a lucky s.o.b.

@darinjohnson7280 Жыл бұрын

I keep a pair of OE solenoids on hand as it is such a common failure! The OEM ones aren’t very expensive at all. Also have had a few with some drivability issues and stalling issues when the intake solenoid fails. Great video as always Eric, enjoy your content and honesty!

@timh36 Жыл бұрын

Yes mine went bad and the car would buck and sometimes stall at low speeds. The car was still under warranty so I took it to the dealer and they knew immediately what it was, and had 2 more in for the same issue.

@andrewg6238 Жыл бұрын

Nice! Glad you get some simpler ones, too.

@buannajim8091 Жыл бұрын

The old "upsell a new exhaust cam sensor for one that was still in spec" move. Pretty crafty, Eric.

@Enrightauto Жыл бұрын

Best description of the 2.4 I’ve heard in awhile 😂😂

@rick980 Жыл бұрын

I love the comment to Mrs. O, "it's a2.4 Baby what do you expect!"

@jerryplante4239 Жыл бұрын

P0014 for the exhaust. Had one last year. Here in the PRMA, emissions components are under a 10 year warranty. Got it fixed for free.

@mattsimms4325 Жыл бұрын

Great video man

@djbruno48 Жыл бұрын

Thank you for sharing.

@mikes6798 Жыл бұрын

nice video, we both have the same torque wrench - that's cool

@ReachOutToWilliam Жыл бұрын

Love the unsolicited commentary on the GM 2.4. That's why I own a Toyota.

@heavydiesel Жыл бұрын

My old Renault Master van I used to top the oil up 500ml every 3000 miles, was the same from new until it was replaced at 120k miles. Had the big 2.8D Sofim engine, would be slow by todays standards but back in 1998 115hp was a flying machine!

@dwaynemadsen964 Жыл бұрын

How weird is this? p0013 a few minutes ago. 2011 Equinox LT 2.4L FWD. Now I know exactly what to do! Thanks Mr. O! Now let's test if I can really do it! Stay safe up there in the PRNY! HA Ha ha!

@bbishoppcm Жыл бұрын

Nice! That thing’s originally from Banks Chevrolet in Concord NH! Weird seeing cars from my area showing up all over the country!

@LakeNipissing Жыл бұрын

Thanks for the intro, Cameraman!

@privateer0561 Жыл бұрын

You can buy cheap 12V heated tape and install it around the PCV pipe and use the vented ACDelco FC 219 vented cap as cheap insurance for the 2.4 freezing PCV/rear main seal/engine killer "issue".

@lukem7203 Жыл бұрын

Good tip. I was curious if a workaround has been created for the PCV systems on these. Wondering also if they get fully warmed up every time they are driven in the winter if that helps as well.

@danfarris135 Жыл бұрын

@@lukem7203I drive a 2015 an hour on the highway everyday to and from work. Has had the snot in the cap and dipstick since new every time the temps dip below freezing. Other than its appetite for oil from bad rings its pushing almost 200,000 miles very soon. No leaks yet, just a fouled converter and oil smell out the exhaust.

@lukem7203 Жыл бұрын

@@danfarris135 Ahh well then definitely engineering issue. Too bad though because I do hear about troubles with oil consumption but also people putting a lot of miles on them. I know someone who had a HHR with the 2.4 as a business vehicle drove it nearly 400,000 hwy miles without many issues other than a quart or two between oil changes.

@brasolt04 Жыл бұрын

@Luke M hhr is a different 2.4 pretty similar but not gdi and doesnt seem to suffer from the same issues the equinox 2.4 does.

@danfarris135 Жыл бұрын

@@lukem7203 I think the biggest issue that causes the oil rings to fail is the distance between the ring land and the top of the piston. These are technically what us old guys called a stroker motor. With the longer rod the pin location has to be moved closer to the top of the piston which means the rings have to be moved up also. Closer to the heat zone of compression which causes the rings to lose tension. This allows more oil by to get “cooked” and cause carbon build up in the lands and it just gets worst from there! I would recommend 5,000 mile interval oil changes before it happens at the usual 60,000- 100,000 mile range and maybe it will buy some time. I have been told that Jasper is drilling the oil lands for better drain back on their rebuilds to help mitigate the problem.

@dwaynemadsen964 Жыл бұрын

"At that point you just put a filter on it and call it a day!" I'm wearing headphones so when I laugh out loud it is totally without context to the others in the room. Thank you for sharing and stay safe! I'll send you a postcard from the home. Is it a coincidence that my family coat of arms has sleeves that tie in the back?

@jeffjankiewicz5100 Жыл бұрын

Good info to know for me Eric, my ex has one of these mistakes, and I told her to check the oil every gas stop. She is just drawn to cars with issues, go figure.🤣 Thanks Eric.

@ReachOutToWilliam Жыл бұрын

Actually, checking oil and coolant at every gas stop is a best practice. That way you know when you last checked the oil and coolant.

@jeffjankiewicz5100 Жыл бұрын

@@ReachOutToWilliam I have a 96 Blazer with almost 220,000 on the clock, all fluid check at gas ups. Oil starts to get dirty, it's gone. 5 qts high mileage and a Wix filter.😁

@scottnorton4256 Жыл бұрын

THEY BREAK OFF FLUSH WITH THE ENGINE1/2 THE TIME, HOW BOUT MAKING THAT VIDEO, THANKS FOR MAKING IT LOOK SO EASY AS I WAIT FOR THE TOW TRUCK.

@JoseHernandez-lf6cr Жыл бұрын

Nice work

@jimhaines8370 Жыл бұрын

Yes they are easy done many and not pricey even with OE parts and customers are happy for a change

@redlock4004 Жыл бұрын

There was an interesting case about ten or so years ago where a Cessna 337 Skymaster twin engine light plane was being flown across the Atlantic by jumps, Canada, Greenland etc. Both engines failed withing a few minutes of each other and put the two pilots into the water near an ice flow. They had survival suits so they lived but the plane sank. The speculation was just as you describe with the frozen PCV forcing an oil seal failure.

@danielklopp7007 Жыл бұрын

It always makes me laugh when Eric uses his "calibrated wrist" torque wrench... however it is curious that his "calibrated wrist" torque wrench gives a click (@10:10), but his real torque wrench gives a beep (i.e. his real torque wrench is one of the newer electronic load-cell types). Pro tip Eric: upgrade your "calibrated wrist" torque wrench! 😁 Seriously Eric, keep these videos coming - they're very entertaining (even for those of us who know our way around under the hood).

@LouJustlou Жыл бұрын

Aha Mrs. O has a past as a school teacher. Explains your choice of rolling carts in the shop! I rescued three of these from the dumpster at my wife's school. My wife was a teacher as well.

@JohnSmith-eq5el Жыл бұрын

doesn't matter what the video is about....still interesting and informative....

@kjbunnyboiler Жыл бұрын

Afternoon Eric

@Sojourning_ Жыл бұрын

Good job boss.

@aaronschoessow2770 Жыл бұрын

Hello Eric, my family has a 20 16 and a 17 equinox and a GMC terrain all bought new, all three have had the solenoids done both intake and exhaust. And all three of them have had the cam sensors replaced both cam sensors on each motor. The terrain had the rear main seal blowout, it was caught did not wreck the motor, last winter right after a cold spell and it was covered under warranty 7-hour repair at the GM dealer. Now so funny you would make a video about this and post it today as yesterday the sisters 2017 equinox has 62,459 mi, in the rear main seal blew out. Luckily I was there when it happened and we did not wreck the motor. Calling the dealer on Monday because it has a 5 year 60,000mi warranty. Here's the crossing my fingers and hoping GM fixes it.

@bass69player Жыл бұрын

I just replaced these solenoids on my 2017 a couple weeks ago. :)

@donjohnson1416 Жыл бұрын

LOL!! "At that point ya just put a filter on it and call it a day" you got that right. ha ha ha

@ryans5959 Жыл бұрын

Another sma vid another like 👍

@frankt2398 Жыл бұрын

" ...up here in the P.R.N.Y."🤣 Thanks Eric O for being who you are!

@charlesk9471 Жыл бұрын

I have put 3 of these on my sons car. An oreilly last 2 years ago. Clogged again. An Amazon pair cheapie failed and got Oem good so far. I wound up replacing the 2 camshaft sensors for recurring mil and they are NOT easy to access. Miserable job! One of those failures I blame on him using regular not synthetic oil. Light went on Again recently and he was not checking oil. Topped it off and self cleared. And the wiper transmission needed replacement. I later saw a recall and filled out the form to be reimbursed by gm and crickets. And replaced the muffler that rusted out. I’m in Ct. they use salt. I told him next car: Toyota Honda, Subie Hope he listens. Thanks for great vids. Long time viewer Charles.

@TheOtherBill Жыл бұрын

Toyota, Honda, OK. No Subie.

@rickhobbs4875 Жыл бұрын

I put an AC Delco FC219 oil fill cap on my 2.4. It has a pressure relief valve in it that bleeds off excess crankcase pressure.

@barry8462 Жыл бұрын

I like that T handle torque wrench!

@JosepGee Жыл бұрын

Would have been sweet automotive KZfaq to finish the repair with an oil & filter change 🙌

@OkinSold Жыл бұрын

Hey Eric, those screens work better if you get oil from your face (a swipe on the side of the nose with your thumb does the trick). Better conductivity or something, I don’t know I’m not a scientist.