Chevy Equinox/Gmc Terrain Rear Wheel Speed Sensor Replacement (Service Stabilitrak Fix)

No video

Chevy Equinox/Gmc Terrain Rear Wheel Speed Sensor Replacement (Service Stabilitrak Fix)

Рет қаралды 8,424

Bill Of All Trades

Күн бұрын

Пікірлер: 12

@creekwalker8178 6 ай бұрын

Praying I don't have to touch the rear wheels on mine. Is there a scan tool that will tell you what sensor is out or giving a bad reading? My Stabilitrak goes in and out so I'm reasonably sure a hub assy needs replacement.

@BillOfAllTrades2016 6 ай бұрын

I used bluedriver scan tool. You can buy on Amazon. Cheapest and easiest route is to replace the sensor. If the warning keeps coming up after that then you know it’s the hub. The bluedriver will tell you exactly what wheel is the issue. Mine had the tone ring broken off the back of the hub. Here is the link to the scan tool: BlueDriver Bluetooth Pro OBDII... www.amazon.ca/dp/B00652G4TS?ref=ppx_pop_mob_ap_share Thanks for watching. Please like and subscribe

@snatcher420 5 ай бұрын

Don't be so sure I've changed them all. sensors,hub assembly front/back,fuses, sp plugs, o2 sensors, new battery. Still comes on and off depending on weather.

@lgsr1 10 күн бұрын

unplug one wheel speed sensor at a time to determine which one may have gone defective? The auto parts store does not come up with an error code.

@BillOfAllTrades2016 10 күн бұрын

So for example if you take the rear driver side apart and then find it’s not the one giving the code then you gotta get the brake pads, shoes, caliper and rotor back on, then you gotta dismantle the whole thing on the other side all over again🤦🏻. Better idea for you… just buy a proper scan tool. If you are fixing things like this then you should have a scan tool that will scan all modules. And it magically tells you the exact location of the fault the first time. Imagine how easy that would be. 😂😂😂. Forgive me for my rebuttal but I like to be precise when working on the car. I don’t like to guess.

@reid8844 2 ай бұрын

Hi did this solve your issue? seems like most say the hub/bearing also tends to need replacement was just curious if this fixed your issue or did you have to do both? Seems like it’s common for the front to need both or at least the hub/bearing. Unfortunately mine is rear left like yours so will see.

@BillOfAllTrades2016 2 ай бұрын

My rear never had an issue. I just wanted to show the process because I was filming a parking brake shoe video so while I was in there I filmed this but put the old sensor back. I will say however that my front did go bad and it ended up being the wheel hub. Replaced the sensor on the front and the warning came back upon driving it. For me it was the tone ring on the back of the hub that broke off. Replaced the entire hub and all is good. Hope this helps. Thanks for watching. Please like and subscribe

@jordynemond8608 5 ай бұрын

Hey man 2017 equinox 2.4L , mechanic told me have low compression on cylinders 2 and 3 and recommended an engine rebuild or engine swap. Is there something maybe he missed or easier solution ? Didn’t know how to message you so commenting on this video. Thanks

@BillOfAllTrades2016 5 ай бұрын

Sounds like he is jumping to the priciest solution. Did he mention replacing piston rings? These vehicles are known for piston rings getting stuck. This would cause oil consumption. Plus it could cause a compression issue. It would still be a big tear down but cheaper than an engine swap.