ECHO We Have A Problem. Customers PB-8010/9010 Echo Backpack Blowers Keep Dying!

Рет қаралды 79,532

11 ай бұрын

Thanks for tuning back into Chickanic! If you found this video helpful, please LIKE, SUBSCRIBE and COMMENT!!
If you would like to show your support, find my Amazon Wish List HERE!
www.amazon.com/hz/wishlist/ls...
Buy your own Chickanic T-Shirt or Hoodie HERE!
chickanic.com/
Find some of my favorite tools in the list below!
Get a WERA tool kit like mine HERE!
amzn.to/3CEkWo5
Get your WERA 8mm nut driver HERE!
amzn.to/3I4tx4B
Find your own 2 Cycle adjusting tool kit HERE!!
amzn.to/3IMn4vB
Get a compression tester like mine HERE!
amzn.to/3KM7Ibg
Get a spark tester like mine HERE!
amzn.to/3vIHUbM
Get your own digital tachometer like mine HERE!
amzn.to/3X2emS7
Find your own digital multimeter HERE!
amzn.to/38aX2FJ
Get some 12" hemostats HERE! I LOVE THEM!!
amzn.to/3tMvlvd
Get my FAVORITE pliers HERE!
amzn.to/36P5ud3
Get an Owl Torx drill bit set HERE!
amzn.to/3urvRze
Want a Endoscope like mine? Find it HERE!
amzn.to/3Ni71Ir
Looking for the BEST 2 Cycle Oil? Find it here!
amzn.to/3E4kCkT
My name is Bre. I took two years of small engine repair at the local college. When I left school, I fell into a wonderful job at a local small engine shop where I worked the counter for a couple years. In 2010 my husband and I opened up our own small engine shop in central Arkansas where I am able to work alongside my family and best friends. We see over 2,000 pieces of small engine equipment every year, and answer 1,000's of small engine questions. We specialize in brands such as Briggs and Stratton, Kohler, Echo and Shindaiwa, but work everyday on MANY other brands like Stihl, Husqvarna, Honda, Craftsman, Remington, Red Max, Troy Bilt, Scag, Bad Boy, Hustler, World Lawn, Poulan, Mantis, Etc.. Hopefully, my experience I share, will save you Time, Money and Frustration in the future!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Although very informative, these videos are for entertainment purposes. Please use all possible safety precautions when repairing and operating your small engine equipment.

Пікірлер: 372

@Chickanic 3 ай бұрын

Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B

@richardjames4632 11 ай бұрын

Echo needs to be giving you some free stuff for doing their QC job for them.

@wallebo 11 ай бұрын

Agreed!

@Youtubecensoredmyusername 11 ай бұрын

Hopefully they don’t go amber heard and file a deformation lawsuit 😂

@anonymousplanetfambly4598 10 ай бұрын

@@KZfaqcensoredmyusername "Deformation" 😆

@raymondrobinson5251 11 ай бұрын

You're a valuable representative for Echo products, and hopefully, they recognize their honest representatives. Each product has a minor issue that repair shops are their first line of defective recognized issues. If you were in my hometown! I'd have you as my number one shop!

@kevinking4371 11 ай бұрын

You do a great job helping people and explaining how to fix equipment.

@paulprigge1209 11 ай бұрын

This is why her so crabing numbers have Jumped. Well deserved! Was watching when she had like 70+ thousand.

@Herbybandit 11 ай бұрын

It's not biting the hand that feeds! It's called feedback! If the manufacturer doesn't get told of issues they're just gonna keep on building machines that fail.

@ITOLDUDA 11 ай бұрын

You legit should be on the Echo corporate payroll. You keep investigating until you find the real causes of problems. Repair techs here just either say they can't fix it or that it's fixed when it's not. lol. As a dealer, I hope you have an Echo rep you can let know the problems with their machines.

@WJCTechyman 19 күн бұрын

The biggest baddest blower I had was one of my own creation. I took an old belt drive furnace fan, 208 cc Honda clone, some duct metal, bicycle brake control, idler pulley and arm from an old snow blower and an old lawn mower deck and made my own walk behind blower. It was engaged and disengaged with the bike brake handle and cable connected to the idler pulley to tighten the belt and manually through the engine speed control. Boy, that thing was powerful. Unfortunately the squirrel cage came apart and I ultimately scrapped it, Next time I do this I will be reinforcing the squirrel cage wheel.

@fatherofmimes4236 11 ай бұрын

Thanks! You keep on doing you. I appreciate the fact that if it is a problem you'll fix it and show us what the issue is regardless of the toes that may get stepped on. I had NO idea the warranty was 5 years for home owners! That's Bossin (is that even a word?)...LoLz

@tedheierman1181 11 ай бұрын

Nice repair.. I would add some heat shield or a layer of shrink tubing to those wires to add another layer of protection and prevent this from happening again.

@shoptchr 11 ай бұрын

Seriously, Echo needs hire you as a consultant when developing new models. Combining people like yourself in the trades with a wealth of knowledge alongside engineers who design these products would be a win-win situation.

@tobylou8 11 ай бұрын

Actually had the exact opposite problem on an old PB-6000!! The wire would pull out and the unit wouldn't shut off. I finally just crimped it! Great vid!

@markwatters6875 11 ай бұрын

For a while there I thought it might have been scared of heights, stopping once it was up on the operators back. Thanks for the videos and tech, mate 👍🇦🇺

@danielrobert7181 11 ай бұрын

While at it, I'd slip those wires into heat shrink tubing so as to give them additional chafing protection. Big virtual hug to you Bre !

@dougfaith9698 11 ай бұрын

Bre! thanx for yet another awesome video. Good troubleshooting yet again! Always helpful. Thanks for for the visit yesterday, as I dropped by to say hi and pick your brain! You're the goodest! Thank you for all you do!

@johncarter1137 11 ай бұрын

I live on a large lot with a lot of trees, mainly pine and oak, and have used both my Husqvarna 150BT and Husqvarna 580BTS leaf blowers a lot. The only thing I've ever had happened to them was a broken cut-off switch wire on the 150BT. I've been extremely pleased with both of them. I know the STIHL and the Echo blowers are the go to for the professionals, but the Husqvarnas have served me well.

@jweaver7170 11 ай бұрын

As always great. Finding random things anywhere is sometimes a mystery worth investing. THANKS Todays random item was a "new nut" in the parking lot of the hardware store. Yes, found owner.

@roberthoffman4713 11 ай бұрын

I must have been one of the lucky ones that got to watch this video before youtube removed it. I don't think it was just your video that was affected. I tried to watch someone else's premiere and it was all messed up. I hope that they get it fixed so that you and others don't need to spend all the extra time uploading stuff twice. Keep up the great work and excellent videos that save us time, money, and frustration. Also it's awesome that you post some of the tools that you use, it's very helpful in preventing others from buying stuff that's not very good quality.

@billcoomber4642 11 ай бұрын

As a former Echo dealer, I found Echo to be the most responsive to dealer service issues. At dealer tech updates, they'd always ask "what have you seen?" An Echo rep would write down problem areas on their equipment the techs mentioned. They would address most of these issues quickly. A great company to deal with, imo.

@corruptduboiscountyindiana5058 11 ай бұрын

i had an echo chainsaw, after one year of light use it quit, the local echo dealer refused to even try to put a new clutch on it and i called echo and got a run around hassle, and the saw never got fixed, so much for that 5 year warranty

@jimmyf1312 11 ай бұрын

Everything echo I’ve ever had has lasted. 2 chainsaws 2 backpack blowers and a string trimmer. Never had a problem

@corruptduboiscountyindiana5058 11 ай бұрын

@@jimmyf1312 good for you jimmy, you get a cookie

@jimmyf1312 11 ай бұрын

@@corruptduboiscountyindiana5058 oh sorry! I didn’t realize you were allowed to share your experience with echo equipment and no one else was. Douche

@MUUKOW3 11 ай бұрын

@@corruptduboiscountyindiana5058we will list this of things that never happened . You either fried the clutch from misuse under "light use " and refuse to take responsibility or your dealer is a moron. I suspect the first.

@williamabramovitz9455 11 ай бұрын

Great video Bre, just a prime example of a variety of issues that can arise, thank you.

@davidmonteil6340 11 ай бұрын

Once again thank you Chickanic for another time, frustration. and money saving tip!

@johnduffy6546 11 ай бұрын

You are incredible! Submit your application to Echo's R & D department as a "Consultant." Consultants make ridiculously big salaries

@quebird3108 11 ай бұрын

Thanks to you, I bought an Echo 2511 chainsaw and couldn't be happier. Great saw!

@roddenman6643 11 ай бұрын

I love your videos, I learn so much on things that are easy fixes, Thanks. GLORY!!!

@Ballroomblitz255 11 ай бұрын

Good catch, Echo makes good equipment and not a terrible fix once you figure out what the issue is. Cheers.

@robert.brokaw3829 11 ай бұрын

Nice to know about the kill wires. Thanks for the video. Stay safe.

@kubotajordan9502 11 ай бұрын

You rock thank for what you do for helping us. And stoping us from attacking are stuff with a B F H ⚒. Y'all have a great weekend !!!!!!

@mattpobursky850 11 ай бұрын

This is awesome. I have a PB8010 that is about 5 years old and I use a LOT on my 2 acres in the fall. Never had a lick of trouble with it yet, but when it does this I'll know where to look!

@wreckloose120 11 ай бұрын

I have a Redmax 6200 from the1990s when I was a pro landscaper. The thing STILL runs great. It's not used commercially anymore but I do run it for at least 20-30 hours every fall to clean up my leaves. I can't believe it's held up this well without any repairs.

@anonymousplanetfambly4598 10 ай бұрын

That legendary Redmax quality...have some Xenoahs (with the null "O")/Green Machines that are still going strong after nearly 40 years in the saddle.

@bobbynash282 11 ай бұрын

Goodmorning from alabama Bre!, Once again Thanks. I can use this to help my 85 yearold father inlaw. Alabama is a big fan.

@fastmover45 11 ай бұрын

Glad you like the 770 I went from a hand held McCullough to a echo 770 and its as near a jetpack as it could be.very fine bit of kit. Keep up the good videos

@matthall5762 9 ай бұрын

Dude, ex-mechanic here. Spent 18 years in the car business. Your method of diag is legit, and you explain stuff in a way that really makes things easy to understand. Mad respect. Subscribed.

@vincentmcclelland9179 11 ай бұрын

Glad to know this, so if and when the problem appears, I know what to look for, and your right, its a beast of a blower, first time I heard one run in person I was like..."I WANT ONE" , I have typical type southeastern Texas type lawn, meaning lots of leaves and pine needles in my yard, and they are hard to blow off the yard, not with this one, yes, its a bit heavy, loud, you need hearing protection, but its fun to blow leaves with it, it blows them away :)

@richpeggyfranks490 11 ай бұрын

Another entertaining and informative video. I don't have the 8010, but my neighbor does. I might be able to help him out someday. I enjoyed the "back-pack blower boogie" near the end. Also, I appreciated your comment about calling the manufacturer and getting the story that they have never heard of that issue before. I have a self-feeding drum sander in my wood shop that began mis-tracking a few months ago. I replaced the drive belt twice (at $65 a pop). I googled the issue and found it appeared to be a chronic problem, with no definite fixes. I called the manufacturer, got "that's a new one" and told them they might want to Google the problem as I had easily found several hundred folks with the same issue and little to no manufacturer support. After 3 buddies and I had tried to figure it out for weeks, I called a retired machinist friend to stare at it with me. He found the problem in about 1 minute. I bought a new drive roller with fresh, sharp knurling and the problem was fixed. Thx.

@anonymousplanetfambly4598 10 ай бұрын

Just the faces and exaggerated movements you made while you were testing the fix got a thumbs up (and a giggle) from me. Funny! I'm a 8010 owner, so if mine starts exhibiting this issue I'll know exactly what to look for. Thanks for posting up!

@forresthigg 10 ай бұрын

Thank you for making the model blower searchable by listing it in the title.

@geoffgay3637 11 ай бұрын

Great video as always. Kill wire is the problem.. Also been meaning to get the owl tools torx drivers so stopped video and ordered both kinds..then finished the video . Great work..

@thomasrapp2536 11 ай бұрын

Our shop has sold over 200 8010s and 9010s and 910 Shindiawa's only real problem that we have seen with them is fuel filter pluging issues, mostly in commercial use. Have not seen any kill wire issues yet, but will keep it in mind. Commercial opperators just carry a fuel filter or two in truck and change it out when unit gets low on power or won't rev up. A few broken main frames from one gulf coarse that keeps droping them off carts is the only other issue we have seen with them.

@james-rk5sd 11 ай бұрын

A little heat shrink tubing where those wires connect to each other won't hurt either

@N4HHE 10 ай бұрын

Plus I’d be tempted to repair the wires with a splice rather than travel to a dealer. Or wait for mail. But would have to find a suitable crimp because I would not trust solder in that hot environment.

@james-rk5sd 10 ай бұрын

@@N4HHE that motor would never get hot enough to melt solder🧐

@N4HHE 10 ай бұрын

@james-rk5sd I said nothing about melting. Solder gets soft with higher temperatures. Vibration. Fatal combination. You will not find solder splices under the hood of automobiles. DoD, FAA, NASA, do not allow wires to be soldered to connectors. Get a small brass tube from the hobby shop which just fits over the wires. Cut about 1/2” length. Fit heat shrink over one wire. Insert stripped wires into tube, overlap the strands. Crush in a crimp tool which folds the center in to pinch the strands. Move the heat shrink over, shrink.

@james-rk5sd 10 ай бұрын

@@N4HHE yes i know what crimp connectors are i have a bunch of bass ones

@supersport57 11 ай бұрын

Thanks, I'll keep that in mind for my unit.

@tonym6920 11 ай бұрын

Really nice diagnosis and fix. Echo take note! 👍👍.

@ronpon1975 11 ай бұрын

I learn something everytime I watch your videos!!!

@mikejerrett7354 11 ай бұрын

I think I figured this out when you extended your arm out the second time ,i thought it might be a wire. 😊great video.

@rodneygreen9968 11 ай бұрын

Chickanic, you are Awesome.👏👏 Smarter than the people who manufactured them.👍👍

@scottygoodwin4276 11 ай бұрын

That pin-clip you found in your drive looks like it's from a john deere mower deck . Enjoy your helpful videos. You and your Family have a great Weekend. GOD BLESS.

@TX_Nano. 11 ай бұрын

Finally, you take the unit to the shop and it actually demonstrates the problem. 😅

@juancastrillon5970 4 ай бұрын

Just bought a 9010. Thanks for the info

@davidthomas9267 11 ай бұрын

Glad to see Brodix sign in background - had a mother-in-law that worked there. She has passed on, but really like the people there.

@corinneyeager 11 ай бұрын

Thank you for helping all of us❣️❣️❣️❣️❣️❣️❣️❣️❣️❣️

@AP12248 11 ай бұрын

Noticed the cover was broken in two spots at one of the screw access holes.I have a Husqvarna 350BT. Plenty of power for a home owner and a lot quiter. Love your videos.

@thomasreece3903 11 ай бұрын

Great video. Great visual demonstration.

@michaeljheinz3336 11 ай бұрын

Nice work Bre as always, have a great weekend.

@SpruceGoose-qx8zj 11 ай бұрын

Bri you're adorable and a real smart cookie! Excellent solution to that wiring issue!😁😁😁😍😍😍

@jrfizix911 11 ай бұрын

The hitch pin you found looks like a bowtie cotter pin used on a mower deck.

@ajdaunay2983 11 ай бұрын

it looks like an ariens lm21sw swivel wheel pin

@haroldhodge7770 11 ай бұрын

Great tips on troubleshooting

@Jim-fe2xz 11 ай бұрын

I've had similar problems with plugin power tools - usually flexing where it goes through the case. Those are some pretty fancy moves! Add a little style to an otherwise mundane clean up task LOL!

@virgilcollins4925 11 ай бұрын

Good thing to know thank you very much you take care be safe

@clrd4tkoff 11 ай бұрын

Awesome Video!! I have a 9010 and if I ever have this problem I'll know what it is! Thank You! 👍🏻👍🏻

@GreenYard8-jm 11 ай бұрын

Great info! I have an echo hb but mainly use my redmax eb's older but get the job done!

@beerdrinker6452 11 ай бұрын

Thank you for helping us. Nice video.

@jamesalich6321 11 ай бұрын

The kill switch works by grounding the coil. You have a short to ground (the short block) on the wire from the coil.

@KSMike1 11 ай бұрын

Right, and I still didn’t see where it was happening. That suspicious looking little spot didn’t seem to be worn through.

@boondocker7964 11 ай бұрын

Had a PB 770 T, for 11 years, only had to change out the fuel filter, moved a lot of leaves with it over the years.

@johnossendorf9979 11 ай бұрын

Love my 20+ year old PB-304. It's only been in the shop ONCE because I left crappie gas in it over the winter. It's definitely not a beast by modern standards but it has always gotten the job done and unlike modern blowers it has a curved end on the tube which I think all blowers should still have.

@user-gr2uk5tm1c 11 ай бұрын

I have the hip throttle so eliminates that problem. Love your channel keep up the good work.

@johnme7049 11 ай бұрын

Thanks Bree, You're the best! Love you!

@butler386 11 ай бұрын

AAWWKK. I think my daughter bought one of these a few years ago. I will send this video to her. She probably won't be able to fix it but at least maybe find a place that will fix it reasonably. Thanks for the videos.

@wallebo 11 ай бұрын

Another thought provoking video. Kudos!

@kennethromeo7711 11 ай бұрын

Great Job!!! 13:49

@scotchdrnkr 11 ай бұрын

Nice new shop. I plan on doing the same thing on my property soon.

@user-lc1df9jd1u 11 ай бұрын

That’s great. Thanks for the advice.😊

@ausseamore8386 11 ай бұрын

Got to confess, when I first came across Chickanic I did not believe that I would be a subscriber from then and still going

@crayonsvat121 11 ай бұрын

Thank you for this important information.

@shawnburr8692 11 ай бұрын

Thank you for sharing knowledge.

@thomassteed390 11 ай бұрын

I seen this the day you released it. Enjoyed the video great content as usual.

@darrelljohnson4658 11 ай бұрын

Good class thanks

@charlieromeoh 11 ай бұрын

After a ton of research I went with the PB 9010. It is a beast!

@upsidedowndog1256 11 ай бұрын

I was lucky enough to see this the 1st time, Bre!

@johnobiro5202 11 ай бұрын

Seems like the wires were too restricted Bre. Great job.🔧👍🇬🇧

@jimmybobhere 8 ай бұрын

It looks like the owner of this 8010 gives it a hot supper. That never helps things. I own a 9010, and I am a bit obsessive compulsive about taking care of it. No kill wire issues for me. Yet. After watching this, I may take preventative measures. Thanks for another great video.

@kencurtis228 11 ай бұрын

TY for Sharing

@teshuvahemmet3036 4 ай бұрын

Thanks for the information 👍

@timothybaer5347 11 ай бұрын

I have a 2005 John Deere 42 inch cut. With a 17.5 motor. The motor blew up. So I had a 24 horsepower motor to go on but I had another guy wire it. He said it needed another coil. And the choke wasn’t right and he didn’t know how to fix it. I know that the coil needs changed because it won’t start now or when it does it won’t stay running. And sometimes it backfires while trying to start it. Tim. From Ohio. Thank you for your time. God bless You have a great show..

@jamesthacoolcat9926 11 ай бұрын

Use a 755 for regular size properties, but have the 9010 for very large properties. Looking forward to fall, the 9010 should do excellent cleaning up leaves.

@ganeshnarayan5505 11 ай бұрын

I have Echo PB-400E i think it is same issue . Thanks for this video.

@billyhill101 11 ай бұрын

Great tip thanks

@jimmungai1938 11 ай бұрын

As always, I enjoy your commentary. You’re a real neat lady all right you have a good day now this is Jeff mungai from Kennerdell Pennsylvania.

@brianshanahan3878 11 ай бұрын

My son has the 9010 so this was a great find! Before the issue happens especially :)

@rajon25 11 ай бұрын

May I suggest perhaps using high flex wire and heat shrink and some other type of strain relief to make your own wires instead of using the crappy ones it came with? Those blade terminal connectors are cheap. Obviously not if a warranty thing but this looks like something that could be upgraded for less than the $1.99 and $2.99. I bought a Redmax in 2011 and was suspicious of the controls being on the blower outlet and opted for the model with the controls on the left however I am grateful for your videos and I have fixed so much of my stuff from ideas you share. Thank you!

@tomhaire4758 11 ай бұрын

Good work

@tracker258 8 ай бұрын

Thank You. I have the same blower 8010T purchase brand new and it is the best I ever seen. I did get a recall for the strap but nothing else. I am disable and can't rake leaves. I have AS with flareups but I don't really find it overly heavy for what is does truly powerful and not one issue. Red Armor premix is the only thing I ever used but now its getting pricey, it already was to be honest. I guess I should carry it back to the Echo dealer I purchased it from for a checkup. Homeowner and I only use it about 2 hours max about 8 times a year so it has low hours. Mine still looks brand new I keep it in our spare bedroom

@charleseddy9903 11 ай бұрын

You are TRUELY AMAZING, way to go girl...

@michaelsnell4034 11 ай бұрын

A carpet cleaning truck that I would use 20 some years ago had a similar issue. It was the newest one they had, yet would randomly shut off and not want to start. they had the mechanic look at it and had it in the garage several times before they realized it had an intermittent break in the wire to the fuel pump.

@tnrodgers 11 ай бұрын

Great diagnosis and repair. The beginning was sounding like a Binford commercial. Ahh, Ahhh, Ahhh!

@dsimp765 11 ай бұрын

Off topic, just wanted to Thank you for the "Speedfeed" trimmer video and your experience. I bought one and it's amazing. My wife especially likes it. I installed it on a new DeWalt DCST972X1 60v flex. No adapters needed just screw off the original and screw on the Speedfeed. I had a 25 yr old echo gas trimmer and it was a beast, always started and ran great. Thank you again. I look forward to your thoughts on the battery powered trimmers and blowers?

@ramblereddie 11 ай бұрын

Nice, thanks

@bartwright430 11 ай бұрын

You are so stinkin' cool! DO NOT ever quit. You should buy Echo and put those other guys out of business.

@georgew.5639 11 ай бұрын

Good to know. We use both models at our golf course. They’re great. But seem to wear out after a few years of use.

@courtneyroy270 11 ай бұрын

Great show, great gal ❤

@richardbaucomjr5112 11 ай бұрын

At the shop I was working at, we had 2 8010s doing this. We changed the wires and it still had the problem. We called Echo and they told us to replace the short block with the updated 9010. Did that and had no problems. Echo could not explain why the units were dying but the short block was the fix. Both were under warranty and Echo paid both with no problems.

@scottyellis3442 11 ай бұрын

Thanks, I've ran into my Husqvarna chain saw doing this years ago & thought it was the coil overheating, changed the coil with no success. Now I know what my problem probably was, but by then I was frustrated & through it away. Now I'll start looking for kill wires if it happens again.

@bobfognozzle 10 ай бұрын

OBTW 6 years ago I plucked a PB-770 out of the trash, it had no spark plug, water in the cylinder, frozen and the starter was removed. I filled the cylinder with WD-40, put on a new carburettor and started it with a drill. I still use it every season doing my yard and both my neighbors…. The thing is bulletproof!