Installing Sena Intercom and Pinlock visor on Shoei Neotec 3

Рет қаралды 20,800

7 ай бұрын

This video was made in colaboration with Fortamoto. If you want to know more about modular helmets have a look at their video: • 5 BEST Modular Helmets...
Music used in this video:
Music from Uppbeat (free for Creators!):
uppbeat.io/t/atm/follow-your-...
License code: 1NTNMIOLLHHTCXK9
uppbeat.io/t/atm/dream-land
License code: SY1VQT54EGTVNXLT
uppbeat.io/t/mood-maze/trends...
License code: 9LDUDUHJG3X0CNTK
"tubebackr - Path Switch" is under a Creative Commons (CC BY-ND 3.0) license. / tubebackrmusic Music promoted by BreakingCopyright: • 🏃🏻 Liquid Drum & Bass ...
Song: DayFox - Nordish Fjords Music provided by Vlog No Copyright Music. Video Link: • DayFox - Nordish Fjord...
The Funk by Hotham is licensed under a Creative Commons License. creativecommons.org/licenses/... Stream: linktr.ee/hothammusic Free Download: hypeddit.com/hotham/thefunk Support by RFM - NCM: bit.ly/2xGHypM

Пікірлер: 53

@je7887 25 күн бұрын

The helmet has grooves for the wires.

@JimBiddle. 7 ай бұрын

Blast from the past, nice to see you again.

@fredkriek539 7 ай бұрын

Happy to see you again! Happy Christmas)

@duncanbarley-tj5cr 5 ай бұрын

Brilliant video, I was really struggling and now I can do it, thank you so so much !!!!

@NoTengoIlusiones 6 ай бұрын

People must understand that different helmet brands different head templates. Schubert for my head presses my head. Shoei fits perfectly. For other people Schubert works just fine. Try them. Cheers.

@chiefpepdesign 6 ай бұрын

So very true. A lot of people explain: 'I have a Shoei head' or 'I have an Arai head' etc.

@yungfabio420 5 ай бұрын

I've ran into an issue after installing a cardo packtalk edge on my neotec 3 where the back pin on the left cheek pad just won't click into place and comes out effortlessly. the one on the right side clicks in fine and is strong but the left has that problem. anyone else?

@FREE_PUREBLOOD333 7 ай бұрын

I do like the Shoei neotech3 and the Comms...but I only bought a neotech2 and Comms last year so it will be many years hopefully till I need a new helmet again. Great video tho guys. Thankyou both.

@rryan01 7 ай бұрын

Hey u will soon be able to use the old comma in the tech 3 , I just read there bringing an adapter out :)

@FREE_PUREBLOOD333 7 ай бұрын

✝️♥️🎅🍾🍻🎄🏍️💨👍. Happy Christmas and a healthy happy new year!!! 🇬🇧

@john-wq8kf 2 ай бұрын

Funny it was a bit of a fiddle but I fitted my Cardo 4x comms to my neotec 3 along with the pin loc with no prob I think I had to make a little cut in the plastic surround to allow connections from the cardo unit to fit into phone, mike cables

@paulsoekhram7465 6 ай бұрын

Leuk ❤

@ramelofaga2144 5 ай бұрын

woww nice your helmet Sir my favorite color is that👏👏👍i'm Ramel ofaga from philiphines

@karthiksivakumar6368 6 ай бұрын

Hi nice video guy I am having BMW C400GT. This Shoei neotec 3 suit for my urban usage

@Blabelesss 5 ай бұрын

Is there anyway to contact you? I have a lot of trouble with my Aprilia scarabeo 500IE and I see you have previously build one and am wondering if you could help me

@chiefpepdesign 5 ай бұрын

No I make the video's to help yourself as much as possible. If that is not sufficient enough, I advice you to go to your local dealership. I am not a dealership at all.

@Petrolhead1251 6 ай бұрын

I bought the Neotec 3 recently and was very happy with the helmet. Unfortunately after removing an refitting the visor the function of the visor opening changed. Before after pressing the center button it opened a little exactly like your helmet in the video. Now it does not really open and you have to pull more on the visor, which is annoying. Does your visor still open smoothly like in the video? Sorry for the off topic comment, but I really want to know what could be wrong.

@Petrolhead1251 6 ай бұрын

The shop also removed and refitted the visor and still the same problem.

@chiefpepdesign 6 ай бұрын

@@Petrolhead1251 I removed the visor once and have no problem. It still opens and closes normally. Have you installed a Pinlock? Could it be that it's not in place? And havent you damaged the release system on the side? Do you know you have to Pull the visor slightly to the front to release and attach it?

@stefancurmi6019 6 ай бұрын

Thanks for the video! Question.... have the sound issues on the Srl2 been resolved with the Srl3? Is the sound better?

@chiefpepdesign 6 ай бұрын

Hi Stefan. Thanks! I have to be honoust that I can't compair the SRL2 and 3. I had the SMH10-R before and compared to that system, the SLR3 is a league of it's own. The Harman Kardon speakers do such an amazing job it's unbelievable! It's so crisp, so clear, so '3D' sounding. I have no sound issues what so ever and I am a pretty 'Audiofile' I can say... Hope this helps in your question!

@stefancurmi6019 6 ай бұрын

@@chiefpepdesign Thanks so much! Your comment is very helpful.

@Regantdarcy 7 ай бұрын

I’m curious, you said you have a medium Neotec 3. How many centimeters around is your head? Mine is 59 centimeters or 23.25 inches. That puts me halfway btwn a medium & large

@chiefpepdesign 7 ай бұрын

I would have to measure my head! 😅 I'll do that as soon as I've found a measuring tape 😊

@donpetryna4356 3 ай бұрын

I have the same helmet. I am right on the line small/medium according to Shoie sizing chart. Have been using medium for my Shoei helmets for years but I tried on a small with the neotech 3 and it fits perfectly.

@brr6605 5 ай бұрын

Where is the "yeah" counter ?

@shaneryan9076 5 ай бұрын

does it bother anyone else the two white stripes don't end at the same point?

@donpetryna4356 3 ай бұрын

Thats why I like it, not symmetrical.

@GarysnewYT 5 ай бұрын

Hello There ChiefPep, Thank you for this video, it’s a good technical thing. Suggestion for your next project, A scooter style Suzuki Burgman 200 or a 400 cc because it’s different from a regular motorcycle. Please do that one. Thank you.

@chiefpepdesign 5 ай бұрын

I already did a scooter! Aprilia Scarabeo. See my channel.

@federicocerbonim7654 Ай бұрын

One question to both of you. After many years of wearing Shoei (GT Air and Neotec II) I went for a change to Schuberth C5, which I regret. (I'm selling it) The question: Are the newly built Neotec II, ECE 20.06 and/or Snell M2020R ? If is sold in USA then is DOT (poor test). Can you extend the info? Thank you. PS: To me Neotec III is not as practical as the Neo II

@chiefpepdesign Ай бұрын

The Shoei Neotec II is certified under ECE 22.05, which is the European safety standard. - In the United States, it meets DOT (Department of Transportation) standards. The DOT standard is often considered less rigorous than ECE 22.05. - The Neotec III, which is an update from Neotec II, is likely to follow similar certification patterns. It's designed to meet ECE 22.06, which is the updated European standard. However, the availability and certification specifics in different regions, including the USA, may vary and could include DOT certification for the US market. The ECE 22.06 standard is indeed an upgrade and offers more stringent testing compared to ECE 22.05 and DOT standards. However, for the exact certifications of newly built models, you should verify with Shoei. Hope this helps.

@federicocerbonim7654 Ай бұрын

@@chiefpepdesign ECE 22.05 is good enough. My doubt is if a new Neo2 from a manufacturing point is already old (NOS) or at least from 2022 when they were discontinued. Thank you

@ckholiness 4 ай бұрын

Do you or should you keep pinlock in all year ? Do you remove it during summer?

@chiefpepdesign 4 ай бұрын

I leave it in. Always

@ckholiness 4 ай бұрын

Ok…I was told that during summer it might move and silicone would loosen?

@chiefpepdesign 4 ай бұрын

@@ckholiness Haven't heard that yet... Can't imagine. But, the pinlock is very easy to undo/redo in het vizer so... If you don't want to take the risk, just take it out. You won't really need it in warm weather conditions I recon. But... If it starts raining all of a sudden, you wish you would have left it in...

@donpetryna4356 3 ай бұрын

It stays in all the time. Have been using Shoei pin locks for many years and never had any issues

@AjaySai-tv1uc 3 ай бұрын

I wish you have good lighting and different angle for the top camera. Since the helmet is black and the parts are black. It is hard to notice the work that you guys did. Otherwise brilliant video and very much helpful. Kudos to the efforts 👍

@chiefpepdesign 3 ай бұрын

Thanks. I know what you mean. It would even be better to have a 4K camera from the top view so we could sometimes zoom in...

@ryanr4181 4 ай бұрын

I need the black and white one I haven’t seen that one

@donpetryna4356 3 ай бұрын

Just ordered that one today. Neotech 3 Satori TC-5

@neofil69 7 ай бұрын

New projects for the year 2024?

@chiefpepdesign 7 ай бұрын

See the end of the video 😉

@mrg6619 2 ай бұрын

Before you buy a Neotec 3 check the availability of parts. Can't find a Pinlock insert without buying a visor for £85, and guess what, the Neotec 2 inserts won't fit!!

@SebastianHoffmann37 2 ай бұрын

lots of love! but too much black on black on black 😉

@pilotrenzo2226 12 күн бұрын

Yeah, yeah, ya, ya, yeah, yeah, yeah, yeah, yeah, yeah, yeah, ya, ya, ya, yah, yah, yeah, yeah, yeah……..

@razzledazzle8948 3 ай бұрын

Your to busy looking at the roof (camera angle) 😂😅

@chiefpepdesign 3 ай бұрын

I know. And still totally not happy with the result 😅

@chewie8 5 ай бұрын

He looks like spud from Trainspotting.😮

@jdeveraux1027 9 күн бұрын

please stop skipping the step where you show people who to put those stupid cheekpads back in. I struggled with that for A FREAKIN HOUR yesterday and one side still keeps popping out.

@chiefpepdesign 9 күн бұрын

@@jdeveraux1027 The helmet is definitely not easy to put together. Same goes for takint the screen on and off... When all set, it feels great on your head.