31 mph on a mini minibike is still terrifying

no.. wait ,..what.. I WON.. HOLY SHIZ I ACUTELY WON... haha yeah boy...nar this is awesome.. give it away bro .i said i would so lets do it...

I want to see a stock blata engine vs the performance 47cc built engine The blata is pretty damn fast

Change your gear ratio, you've clearly achieved your max engine RPM with no problem, sounds like you've got plenty of torque to change gearing I would do that before you waste your time with anything other than that exhaust issue, have fun! Be safe!

There's still tons of mods you can do to that engine, lightened flywheel, larger jet, opening exhaust port with dremel, head/piston porting, boost bottle carb port, 7T front pinion, taller or shorter rear sprocket, e3 spark plug and some, it can do 50mph if you know what you're doing, believe me, my buddy had his doing 61mph lol.

Congrats skullcam! He makes awesome pocket bike videos 👍

I received a Zoom Q40 and finally had time to troubleshoot and fire up my Q40. The previous 2 owners said they could not get it started, but I did after an hour. Schematics needed to see how it was wired.

Looks and sounds great man. I'm sure it runs better than a stock motor. Maybe the stock pipe broke because you were pushing too much air through it with that performance engine! She couldn't handle the power!

A light bar would definitely be useful for one of my upcoming projects. Great video btw👍🏻

I did a bore kit on my old dirt bike carb clutch and carbon Reed i heated up the reed stop and bent both fins about 1-2mm made a big difference

Your vids help me figure out so many different things that I need to know for my bike

If your muffler was already bad/ falling off before this experiment that takes away about 2-4 mph off the top speed on these bikes. It's most likely a 35mpg bike with a good exhaust and Mabey some carb tuning sounds like it wasn't reving high enough which could be it is to rich (more fuel and not enough air ) .. also try golden spectro 2 stroke oil , 100% improves performance on 2 stroke bikes used this back in the day on my Yamaha blaster

Without porting and kits standard well tuned (right size jet) and good ignition some of the cheap China minibike should be able to do 30mph easy . At least two I had. Fully upgraded with the big bore kit, ported crankcase, lighter flywheel and different crank and bigger carb (15mm) mine does 42. A better exhaust could bring some more. But don’t really need more 😅 it’s more than enough as it is and pulls like a train. Also have a clutch with heavier springs. The trick is to get your tune right, as lean as possible. Just don’t run them real hot. They will seize. Everything shakes of of them or tears😂 so much vibrations on these engines.

Love watching these videos! Wish I could get a pocket bike but my city is crazy about riding them on the street :(

Those light bars are sweet, I bet one above the hitch on a truck would be a life saver.

49cc 2 stroke, 5.5:1 transmission reduction, 20t front 44t rear sprocket. 170lbs@ 31mph. Flat land.

Damn, that VTEC at 5:45

I have a mini bike with a gx200 Honda and I really like how you always restore all your pocket bike and make them nicer and faster

that light bar looks pretty solid

Love the vids and how you make them acutllay enjoyable to watch!!! 👍👍👍👌👌

Good job on the bike man!

Haha Skullcams winning like the big dog he is! I like those lightbars! They would look sick on a bike. Nice speed runs! Can't wait to see more custom upgrades. 😎

that exhaust sounds so good when that baffle fell off lol

Enjoying the vidoes man woeking on a midi moto of my own and just got her running.Nearly time to test drive ot....😁

Hey dylon, I know I’m late, but I’ve been I sub for a while... I think I’ve been a sub since the Red Bull go kart! You’ve inspired me to do so much to my picket bikes, and that light would be sooooo awesome on my new build! I’m building a complete custom dirt bike, converted from electric to gas with some cool add ons. Anyways, ur videos are the best and keep it up!👍

higher compression and porting will help that top end if your arm isnt hurting to pull start it then its not high enough

Can you change to a smaller rear sprocket to gain more top speed at the expense of acceleration? This bike looks and sounds like it could "stretch its legs" a little further. I don't think 50 mph is off the table. nice bike, peace :)

And you can also port and polish the cylinder

I have same engine on lil pit bike top speed I’ve done was 35 mph tops I have done big bore 44 mm kit ported the intake rough it up a lil polish exhaust , shaved the head by a lil for more compression ,carbon fiber reed Walbro butterfly carburetor, copper gasket Vpower Ngk spark plug Gear ratio front 20T back 54T Really good for mid and top speed gear ratio You would really be surprised how much power you can get out these lil engines With some time and money and good dremel lol

also you need a 7 tooth front sprocket and a smaller rear sprocket, i used to have a few of these exact bikes about 18 years ago.... the thing that spins me out is the fact that all these mods were available when i rode them.... no improvements over this time in performance parts

And you can also do a smaller sproket in the rear

I want a light bar for my dirt bike that would be so cool keep up the good work man

i love the old blat pocket bike great work

I did 30mph and wheel popped I slide across floor, would've had broken bones if I wasn't built strong haha

So the company is basically just saying " the wheels on our bike are capable of spinning 50mph"

Love your work❤️❤️

110cc 73mph is terrifying

Try some front sprocket upgrades. Ive gone over 35 on stock engine by just changing sprockets

Airsal 70cc bigbore kit for piaggio engine moped will fit chinese crank cases with a 7mm spacer ;) This is a top speed run with just bolt-on's.

amazing vid also my cat eye pocket bike is almost running

Love the bikes the 47cc pocket bike is sweet thanks for the awesome videos

I had a 49cc engine and I got a stock cylinder and Piston but the stock ones don't have a window in the Piston like yours did

You had it winding pretty tight!!

I'm looking forward to match porting and doing many dyno runs. See you soon?

Light bar would be great for a go kart , Great video Pokémon bike vs this one ? Shout out From Turlock CA

You can weld on the inside of the cylinder head and get extra compression

Have you tried making the rear wheel star smaller?

Are you talking about sprockets when you mentioned possibly adding a clutch with higher teeth?? If not then what are you talking about? Havemt heard of that mod!!

that light bar would go good on a project I got in mind so might as well comment haha

Maybe polishing the crankshaft can raise the rpm... Maybe

Hey I want to light bar. That would look sick on my 1988 ktm 350.

I Like your KZfaq Videos and you inspire me to Work on my Pocketbike as Well i would Love to have The light bars

That liGht bar would go nice on my mini bike

Try make the original bike engine run Can I have the light bar

can you put it in a drone ?

The Blata 2.5 is soooo rare now. I can't find one

$100 mods on a $40 motor. Just buy 2 more motors & put 3 motors on! You will definitely go way faster!

Does this have a ported block? how many HP do you suspect it is? upgraded ignition?

my name is paul i like your video is motivational

You should install a 19mm carb from a KTM sx50 available on aliexpress to get a better speed. This performance carbs are not really a big upgrade.

I've heard the electric start kills some power. I'm not sure how true it is but It might be a interesting experiment

Ah man I want that light bar for my pit bike that would be nice

Shame your exhaust broke Mine seems pretty solid and looks awesome in my opinion

Lol mines hits 52. It’s just how bad you want it to go 50+

light bar would be nice maybe try connect it to my yz

can you do a superdirt build in the future please?

I've actually never wanted to win a giveaway more🤞 I think its the only way I would be able to ride this winter,it's getting darker her at about 3pm at the minute

Do they say what weight they used on the advertising

That's not bad at all....Cool

Hey Dylon, what I did to go faster on my custom scooter with the 49cc pocket bike engine is mix 2L of racing fuel with 3L of normal fuel and it went blazing fast now I want to try 3L racing fuel and 2L normal I hope the engine won't blow up😂😂 cause I crazy for speed, wy not give it a try your self😉

I have a modified stand on a scooter I want to put those lights on lmao

Mine does 68mph though I just changed the sprocket to 14teeth

Hey Dylon ... Bro, when u say u dropped a $100 on the bike and u expect more .. In NZ you get fxxk all these days 4 $100, Anything with a motor for $100 is Premo. How old r your wheel bearings? Lighten the flywheel, re-jet the carb. What tooth sprocket are u running? 80 tooth will get u a couple more MPH.... Not to pretend to know everything .... Your channel is good ..

The exact same thing happened to my pocket bike exhaust pipe. I'll have to weld and reinforce it.

Man that's scary think of it with a big motor

I've wanted a light bar for my pit bike for sooo long but can't afford one because I need to save for boots/other gear

I need a light bar for my quad. Would love to get a free one

Nice light bar

If I get that light bar I'll put it on my toolbox Drift Trike (new-build)

Could you dyno a pocket bike 🤷🏼‍♂️ that light bar would look sick on my pit bike

If you want get a smaller rear sprocket at least 3 or 4 less teeth,You will go faster,much faster,front one makes only small difference if you go larger.

i think the top speed on a pocket bike will always stay the same...the mods just change how quick you will reach to speed..only mod that may slightly increase top speed would be sprocket swap..

Yooo I want that light bar also what is a good price for a cat eye

Can you put a fairing on it? Seriously, ditch the pocket bike and build a streamliner using the engine, and you could probably get over 100 mph - easily

Is it a 66t sprocket on the back wheel how many teeth on clutch and wheel sprocket

I got one exact like that one yellow

I paid $193.00 NEW free shipping for the all black pocket rocket

Does this bike have any transmission?

I cut the muffler off of my pipe it didn't run any different I think you could still use it

Love ur vids I just got a x15 it’s awesome

Cool light

would love the light bar for my bike! btw love your vidz!❤

I would love that head light for my midi moto. I can't see were iam going after 3pm. And i love riding at night.

I got ± 85km/h chinese pocket bike,front gear 9T rear 56T rider weight 58 kg

try 7t front 63 tooth rear thats what i run when i race

i have a question i was wondering if u can help me i have a 49 cc honda pocket bike engine but the ignition coil is not working i was asking if i have to replace with the same ignition coil because i realy can not find that ignition coil on any retail shop in the area iam staying i was wondering if u could assist me please

Okay that pipe was you most expensive upgrade yet it fell apart with a kid on that bike it will do 40 plus's

Have you ever tried racing gas?

I also made a pedal for my sit down scooter that has some sexy chorme Harley Davidson's bars