chinese quad no spark!!

Рет қаралды 44,798

the brothers

Жыл бұрын

replaced entire wire harness with Amazon replacement now no spark. need help please!

Пікірлер: 39

@user-dp9hi4hk9e 6 ай бұрын

Thank you man that was a great help I appreciate it

@user-wq3gi6xt1h Жыл бұрын

Have 90 cc would not start or turn over so bypassed the selonid pole to pole and jumped it off started up ran it for thirty mins ran good and revealed up nice no misses then got on put it in reverse and gave it some gas and it stalled out now will not crank back has no fire what so ever ordered a new coil and cdi box and senloid ,new spark plug do u think that will fix it it is my grand son's and is really on me to get it running again also have green wire loose at the battery do u know wherein goes someone please help??

@johnnydunn4747 Жыл бұрын

Which CDI box do I need to use on a 150cc ,gy7 engine

@williamlynch6095 7 ай бұрын

Did you figure it out I did same to mine replace everything new still no spark

@oscarbu4833 Ай бұрын

It's the stater inside the cover where the wire goes into the side case. I just had to fix the exact same 4 wheeler with the exact same problem 😂

@jcurry37 Ай бұрын

Are you referring to the wires that go inside the motor box

@oscarbu4833 Ай бұрын

@@jcurry37 yeah aka crank case, side plate, or as I said side case putting the two together..... But never motor box 🤣

@garrettcampbell5995 11 ай бұрын

Check the kill switch plug. Make sure the wires are leading to the same things from the old one. Then see if the back Saftey switch is open loop or closed loop. If that’s all correct I would say the Cdi box would be wrong or bad. Check the harness wires and see if they are the same as the original one. If so the cdi is bad. I’ve had new one be bad. Chinese parts like these are super cheap made and made with bad parts some times. When right that thing will make a nice spark with a loud arc snap sound when it sparks.

@Alexmartinez-qp5fm 11 ай бұрын

Hi I’m having the same issue , can u send me the link of the wire harness with the plug n play 6 coil stator ?

@Blaser_88 10 ай бұрын

Did you end up fixing this ?

@CodysKarts 2 ай бұрын

Same brother no idea why I don’t have spark

@rosssmith2344 9 ай бұрын

You need to ground the brake light safety switch

@crystal8722 Жыл бұрын

You have sister's here too bro, lol 🙂👍🏻

@thebrothers4311 Жыл бұрын

Haha, thanks for pointing that out 🤣

@unknown_4024 Жыл бұрын

Old school way

@user-dp9hi4hk9e 6 ай бұрын

Man what mine was doing the same thing but I went ahead and installed the plug and it fired right up

@richcasteel6593 10 ай бұрын

Could be the ground Does it look like the other one has a ground Nfl just run a grown wire Put it on the bolt

@moistyfinch2226 Жыл бұрын

I have the same problem , we’re you able to fix it , both of my new wiring harness won’t give spark , I’m thinking it’s a safety

@thebrothers4311 Жыл бұрын

It's been to cold for me to work on it. I'm think the stator sensor is too far from the flywheel and needs adjusted. There's another youtuber that shows it. Check him out. He also tried 2 brand new wiring harnesses before he solved it

@moistyfinch2226 Жыл бұрын

@@thebrothers4311 who’s the KZfaqr ?

@thebrothers4311 Жыл бұрын

@Moisty Finch here's the video link: kzfaq.info/get/bejne/fZageMuWs5vUlYU.html

@thebrothers4311 Жыл бұрын

@@moistyfinch2226 did you try it? Did it work?

@moistyfinch2226 Жыл бұрын

@@thebrothers4311 yup ! That’s what it is , funny because I returned a wiring harness before because of this problem thinking it was faulty , I suggest you go try it , it takes 5 mins

@mattstubbington8805 Жыл бұрын

The two pin wire connector at the rear next to the three pin connector is for a emergency kill switch, at present there isn't one connected to it so this will be causing an open circuit hence no spark at the plug

@thebrothers4311 Жыл бұрын

I've seen a few other video and they don't need to have that 2-pin connected to get spark

@unknown_4024 Жыл бұрын

Bad cdi box had the same problem that fixed it

@thebrothers4311 Жыл бұрын

I've tried 3 cdi boxes, not the issue

@thebrothers4311 Жыл бұрын

I think the stator sensor is to far away from the magneto spinning. I need to adjust it but haven't had time. Another youtuber pointed this out

@user-hh8ol3uq9f Жыл бұрын

It's your kill switch

@user-hh8ol3uq9f Жыл бұрын

Cut it off at your cdi your kill switch

@user-hh8ol3uq9f Жыл бұрын

I believe it has an open ceirt to start

@treversquellati8491 Жыл бұрын

Having the same problem

@thebrothers4311 Жыл бұрын

I have a different wiring harness on order. Supposedly the updated model. I'll post a video if that works

@eagleguy007 Жыл бұрын

Bad coil

@thebrothers4311 Жыл бұрын

I'm going to send it back to Amazon and buy a different one. This one had to many connections that I had to wire together manually. I'm going to get the plug and play option

@Alexmartinez-qp5fm 11 ай бұрын

@@thebrothers4311hey I’m having the same issue and I got the same harness with too many coil connectors, can u send me the link to the wire harness you re ordered the plug n play 6 pin stator coil?

@unknown_4024 Жыл бұрын

Man put it in neutral run a couple steps get on and pop it into first gear start rt up

@thebrothers4311 Жыл бұрын

It's a 50cc kids atv... there is no neutral, reverse, 1st, 2nd or third... besides, with no spark it ain't gonna fire up