Although the proper flywheel tools are cheap it would take a month to get to me when shipped from China. I've also made a video on how to fix a CDI • How to fix a CDI
Пікірлер: 71
@quitblazing3 жыл бұрын
Good video. So many people making 45 minute videos on the same thing. Simple and fast.
@inkcartridge7193 жыл бұрын
Mr, I like your attitude! Sorted it for me. You're a gentleman and a scallop!
@eizzo2289 ай бұрын
No special tools uses a thing no one has
@acgolem9 ай бұрын
What things did I use that no-one has? Considering most people found this helpful I'd assume people have a basic drill, a spanner and can find a piece of scrap metal 🤷♂️
@elementalmedia39134 жыл бұрын
Absolutely brilliant bro. Thanks a million.. Ur awesome..
@emoh_em_ekat_sdaor_yrtnuoc86184 жыл бұрын
I’ve been trying to find something that’ll work and this seems the best
@thenewtalkerguy4962 жыл бұрын
Wow this is very crafty. Thank you
@bajasgarage31743 жыл бұрын
Can u use a 2 jaw puller
@acgolem4 жыл бұрын
My scooter was misfiring and running rough. Someone suggested it could be the stator which is why I was removing the flywheel. What actually fixed it was correctly setting the trigger gap. In the video just right of the spanner are 2 Philips screws. They hold the trigger near the flywheel. I used a feeler gauge to gap it correctly and it ran fine after that.
@Vidya19393 жыл бұрын
Wow, magic , u mean this round plate(magnet) just plugged in on the shaft & locked with locking pin..TkQ v much for the trick I find this the best video
@ketankadam56694 жыл бұрын
Excellent idea, will try
@chriscollins23092 жыл бұрын
Thanks bro…. Why this didn’t occur to me before? 🤦♂️it’s sometimes the easier of fixes that are missed looking for the complicated answers haha.
@HD-freak9 ай бұрын
Really thanks man. Best idea.🙏✌️
@travelwithpramod68632 жыл бұрын
Simply super brother.
@randomdude7651 Жыл бұрын
Bro, that is genius!! Thanks!!
@tiberiuadrian38824 жыл бұрын
Thanks!it work for me.Make more please!!
@acgolem4 жыл бұрын
No problem. Subscribe for more.
@iratenews1753 Жыл бұрын
how to remove the gold part tho
@derekennow45282 жыл бұрын
Thank you so much. You sir get my subscription
@rauleascobedo23 жыл бұрын
thanks you saved me $10 dollars,
@acgolem3 жыл бұрын
No worries. Would help me out if you hit subscribe. I'm trying to reach 1000 subs. Thanks for watching.
@justinouellette82893 ай бұрын
You don't need the plate...3 screws into those holes,keep turning and it will walk right out
@declanofarrell82552 ай бұрын
Fuck you I did this and I ducky my scros
@caseyburlison43153 ай бұрын
Simple yet effective... Thx
@acgolem3 ай бұрын
Glad you liked it. I'm trying to get to 1000 subs. It'd really help me out if you could hit the sub button. Thanks.
@Vidya19393 жыл бұрын
I think if I can not pull then I must push it from back . TKQ
@Vidya19393 жыл бұрын
I saw u r video again, & followed As u said but no luck, u took it out just like that , I don't understand what holding fly wheel on shaft???
@acgolem3 жыл бұрын
I had already removed mine once so it was loose. You need to crank it hard. It will pop
@Vidya19393 жыл бұрын
optimistic but realistic ----- pop???? U mean it will get loose???? Do u think it is rusted and tight hence not coming out???? Can I use WD40. Do u think this kind of spray allowed& won't spoil any part .Acutely I am fed up .pse advise pse say how get access if it is rusted where to spray
@docholliday11854 жыл бұрын
AWESOME!!!
@nemesis513964 жыл бұрын
Thanks now i dont have to spend 10$ on a tool ill only use once lol
@reecedisalvo16523 жыл бұрын
I just made a mistake but only a 10$ mistake
@mikeneff8322 жыл бұрын
Any way to do it without flat stock metal ? Like a small pry bar or something?
@acgolem2 жыл бұрын
It may be possible but I wouldn't. The flywheel triggers the spark. If you bend or warp it you may throw off the balance and the trigger magnet may not line up with the sensor etc. Too risky.
@bgpautomotive Жыл бұрын
I tried prying with a seal puller and would not recommend it. The casing where the muffler mounting bolt had been had already broken off, and I broke a second piece off the housing.
@tonyfree26916 ай бұрын
It's more delicate than you think so pry and hammer crank end with the nut on is not an option.
@marianmrn34513 жыл бұрын
Thanks 💪💯
@BELG19943 жыл бұрын
How much cm between the center of the holes?
@acgolem3 жыл бұрын
I no longer have this sorry.
@sumithpriyantha12123 жыл бұрын
Good idea Got it
@BABA16000302 жыл бұрын
أفكار ممتازة 👍
@bmw.sexual2 жыл бұрын
Yep i did it and i broke off that mettal piece but nis idea
@vijayakrishnannair2 ай бұрын
Nice
@andysulfur79922 жыл бұрын
Thanks man! you save me 🔩⚙️
@woowoowoo784Ай бұрын
Your method made me got off mines. Subscribe to u for that woowoowoo 😊
@billybilly7811 Жыл бұрын
thankyou
@tonyfree26916 ай бұрын
Champion Kiwis 🥝
@christopherwatson283 Жыл бұрын
Nifty.
@isidromartinez938 Жыл бұрын
Genius!
@acgolem Жыл бұрын
Cheers. Give me a sub to help me out. Need to get to 1000. Cheers.
@hej13973 жыл бұрын
Genius
@ahmadking36753 жыл бұрын
You made a special tool
@eirikjostensen19404 ай бұрын
I used a 5mm armor proof steel plate and it bent the f ing plate💀💀💀 the flywheels is still not lose💀
@hogg1media627 Жыл бұрын
I dont have a wrench and tried to use a screw driver to keep it from turning. And bent the crap out of my screw driver.
@acgolem Жыл бұрын
Yea mate. A lot of force on that. Even with a wrench you need it locked to something solid. I've seen people lock it in to a bolt and bend the bolt. Why do you need to remove the flywheel? My fix turned out to be trigger gap which was the sensor outside of the flywheel. There's not much under there.
@hogg1media627 Жыл бұрын
@@acgolem I bought a impact driver and took it off like butter. People should buy one if they are going to own a scooter. I had to replace my stator. Successful install by the way.
@cxxl3693 жыл бұрын
Yeah no mu spanner bent
@leonv8089 Жыл бұрын
isnt this destroying the stator?
@acgolem Жыл бұрын
No the flywheel spins around the stator. They're not attached. This is pulling the flywheel straight off. They never make contact.
@matthejl8 Жыл бұрын
It is a special tool...you just made one.
@acgolem Жыл бұрын
You're a special tool.
@matthejl8 Жыл бұрын
@@acgolem thanks bud. I do like the vid though. I just don't have a press to make one.
@acgolem Жыл бұрын
@@matthejl8 haha sorry, just having a laugh. Yes it is a special tool but you don't have to buy it. That description is a bit too long for a video title. There is a special tool that can be bought for this job. This method bypasses the need to buy 'that' special tool. I made mine with a hand drill not a drill press.
@bgpautomotive Жыл бұрын
@@acgolem What was the thickness of the metal you used?
@acgolem Жыл бұрын
4m. Actually it may have been 5 or even 6mm. Sorry was ages ago now but when you asked, 4mm came straight to mind so I'm fairly sure that's what I used.
@servantoftheservant50223 жыл бұрын
Harihariharibol newsubscriber lets c what u got best south africa
@alienlifestyle37689 ай бұрын
Thanks for the tip I broke my stator that I was gonna replace with this genius idea 🖕
@acgolem9 ай бұрын
I'm not sure I understand. You were going to replace your stator anyway and you somehow broke it while removing the flywheel? What was wrong with the stator? Was the battery not charging. My problem turned out to be the gap for the trigger sensor on the outside of the flywheel so I didn't need to remove the flywheel anyway.