Looks like a blue meanie from the animation, "Yellow Submarine"
@seleneferrer25166 күн бұрын
Me podrías decir si el tornillo de regulación de aire es el que está en el frontal en la parte del filtro gracias y buen video
@jamesthebuilder31419 күн бұрын
GREAT VID SO I HAVE A GALV TRAILER WANNA PAINT IT BLCK SO USE ECTH PRIMER THEN TOP COAT IT FOR GOOD RESULTS ?
@richardb8317Ай бұрын
NOT SAFE>>>>THEY ARE CHEAP TO REPLACE...If they break under way you CAN GET KILLED NEVER FIX A FROZEN STEERING CABLE...REPLACE $70
@michaelsadach54012 ай бұрын
Thank you,you gave me a starting point. That makes sense. I only fill my inverter with 4 hours of gas and let it run out. It vibrats when it runs out of gas.
@woowoowoo7842 ай бұрын
Your method made me got off mines. Subscribe to u for that woowoowoo 😊
@goggo433 ай бұрын
Is ATF auto transmission fluid?
@acgolem3 ай бұрын
Yes it is.
@user-cs9dw2tk2o3 ай бұрын
Thank you so mutch!!! Very appreciated your advice! It was accurate cause it solve my problem with my westinghouse 2200 .I was thinking that it was the end of it, but thanks to you it wasn't. Thanks!
@vijayakrishnannair4 ай бұрын
Nice
@robertaustin19454 ай бұрын
You missed the idle jet on the top its the one at 12:00 O' Clock
@acgolem4 ай бұрын
Indeed. In this instance I was more concerned with removing a blockage on the fly. Get the motor running without removing the carb to get someone home.
@Steven-jb8jn4 ай бұрын
looking forward to your next test on galvanized steel
@caseyburlison43154 ай бұрын
Simple yet effective... Thx
@acgolem4 ай бұрын
Glad you liked it. I'm trying to get to 1000 subs. It'd really help me out if you could hit the sub button. Thanks.
@justinouellette82894 ай бұрын
You don't need the plate...3 screws into those holes,keep turning and it will walk right out
@declanofarrell82553 ай бұрын
Fuck you I did this and I ducky my scros
@zizwehunt18724 ай бұрын
Just take the rod out and clean it then clean the inside tube!
@MichaelConquest5 ай бұрын
Excellent video! Highly informative. I have a few boat trailer projects coming up that are both painted and galvanized. Your tips are definitely going to come in handy. Thank you!
@aquious9535 ай бұрын
Can i spray rustolium professional cold galvanizing spray over a previously hot galvanized anchor?
@acgolem5 ай бұрын
Technically yes. I've not had great success with cold galv sprays adhering but it is going to do it any harm
@gcreese68315 ай бұрын
Great video bro. Nice& quick and I appreciate you sharing that we don't need to remove the carb. Well done
@eirikjostensen19406 ай бұрын
I used a 5mm armor proof steel plate and it bent the f ing plate💀💀💀 the flywheels is still not lose💀
@Farmboy19666 ай бұрын
Holly F, I don't have the patience for this guy...😢
@leonardotaramasco90256 ай бұрын
Que medida de chicler de alta lleva?
@manicmasterofmetal26206 ай бұрын
I just bought a br1700 from the local dump/ buyback shop and it wouldn't start. It was pouring fuel out of the drain in the bottom of the carby bowl. I took the carb out and tinkered with the float. It all seemed ok. I put it back together and it started first try after putting fuel in it again.no more leaks. I will be taking the front off tomorrow and checking all the connections. I hope it will fix the problem of no generation. It is because of people like you that backyard mechanics can fix very simple problems. I will keep you posted as to the outcome of my endeavours. Thanks muchly for your video.
@acgolem6 ай бұрын
Well done.
@whitestar35317 ай бұрын
Thanks tremendously for giving me this confirmation appreciate it. I went to the electrician and he told me I was roasted, was better off buying a new bike and my bike was my source of income put my tools and everything in it. Did the oven trick and she ready to work thanks
@tonyfree26917 ай бұрын
Champion Kiwis 🥝
@whitestar35317 ай бұрын
Hi thanks for furthering this, please tell me was it a permanent fix
@acgolem7 ай бұрын
Yes.it lasted the entire time I had it
@AtholRowsell8 ай бұрын
Special note, just used your fix although didn’t actually notice that it fixed it until plugging a power device into it and then it was working. Up until then the light was still red on overload alarm and was assuming it hadn’t worked.
@86fiend9 ай бұрын
What shop?
@garymcintyre843110 ай бұрын
Good idea mate. Ive got mine apart and it had me a bit stumped how to get lub through it. Im going to try Inox mx4. How is yours holding up?Thanks.
@eizzo22810 ай бұрын
No special tools uses a thing no one has
@scooterman7098Ай бұрын
😂 beat me to it
@scooterman7098Ай бұрын
@@acgolemnot I. All we got is wood 😢
@HD-freak11 ай бұрын
Really thanks man. Best idea.🙏✌️
@alienlifestyle376811 ай бұрын
Thanks for the tip I broke my stator that I was gonna replace with this genius idea 🖕
@BigLeafDropper8611 ай бұрын
Great info, thanks for sharing
@tommenhansen11 ай бұрын
did not work
@zachsiler6979 Жыл бұрын
So I have a Galvanized Boat trailer that I have already cleaned and strip the rust off of. Is my best bet To get some Zinc Gal coating to fill in the scratches and some other minor holes. Then spray the Etch primer over that. And then get a acrylic based topcoat?
@acgolem Жыл бұрын
There are multiple methods that will work just as well as each other. All with some benefits and some negatives. On my boat trailer I used cold galv primer on any bare metal where I had ground away rust. I then top coated the whole thing with a water based top coat. I brushed it. Its held up well 2 years running so far. The benefits of this are UV resistance and water based can be recoated without major prep. No sanding or undercoating required. Just wash and slap another coat on in a few years. www.bunnings.co.nz/white-knight-rust-guard-500ml-white-satin-quick-dry-advanced-enamel-paint_p1560446 If you look too closely it's not the best finish as water based is thick and dries quickly. Has brush marks etc. The benefit of brushing is there was no overspray in my garage. Spray cans do give a nicer finish. They should last fine. If you go the spray can method I'd use cold galv on the bare metal. Etch primer over the cold galv then topcoat the whole trailer. You could even use a silver galv. It's a galv paint and a top coat all in one. Instead of using 3 different cans you just do a couple coats with the one. I've heard mixed reviews on these. Some people swear by it and some don't. The rust protection ratings aren't as high as cold galv but it's still 60 where cold galv is 72. I will try some of these products in the near future. www.bunnings.co.nz/crc-400ml-bright-zinc-rust-protection_p0049610
@STARFLEETC0MMAND Жыл бұрын
Question: Can Zinc Gal Be Used On a Shipping Container Home Interior & Exterior ??? Thanks For The Awesome Review. ✌️🖖
@acgolem Жыл бұрын
Yes. It should be over coated tho. It is usually a Flat finish and doesn't have great weather resistance. It either has to be over coated with an acrylic (water based) paint or you need to use an etch primer before using other top coats such as epoxies or enamels.
@thisissamsaddress Жыл бұрын
I have one of these, same fault. Same thing fixed it. Cheers legend
@realsircambridge Жыл бұрын
guys i took a similar approach to this that worked. I used a spray bottle and sprayed isopropyl alcohol on all the possible electrical contacts and blew them out with a compressor, and my generator finally stopped saying overload. i cant believe it, ive tried everything else. i did leave the generator in the rain once last year, and I used it in the desert once, and it turns out the dust there is mildly electrically conductive, and there might have been a bad electrical contact, i couldnt find it individually, but spraying isopropyl alcohol worked for now.
@BjornW_777 Жыл бұрын
S tour cam sprocket blown up yet?? 😂😂
@iratenews1753 Жыл бұрын
how to remove the gold part tho
@CraftingcrazyCat Жыл бұрын
Thank you. my stressed our hubby asked me google anything to help solve this problem. Manual was useless. He is off to try out your suggestion.
@acgolem Жыл бұрын
Good luck. If it works for you please help me out by hitting subscribe. Thanks
@tuckswanger Жыл бұрын
Thanks for sharing this very helpful . GOD BLESS you
@hogg1media627 Жыл бұрын
I dont have a wrench and tried to use a screw driver to keep it from turning. And bent the crap out of my screw driver.
@billybilly7811 Жыл бұрын
thankyou
@randomdude7651 Жыл бұрын
Bro, that is genius!! Thanks!!
@DarrynHughes-ge9es Жыл бұрын
Hi mate, are based in Sydney? was keen to get your advice
@acgolem Жыл бұрын
Yea sorry. Kiwi. But ask away for advice. I have a stupid amount of painting experience in all but automotive. Could probably bluff my way through automotive tho 😬
@roywilson6688 Жыл бұрын
Hay mate are you still stacking silver?, will you make any more videos, I live in the bay of plenty and started stacking a month ago
@FatherUber Жыл бұрын
Worked great - back on the water.
@perepeharetuku Жыл бұрын
Thx nz explained.
@matthejl8 Жыл бұрын
It is a special tool...you just made one.
@bgpautomotive Жыл бұрын
@@acgolem What was the thickness of the metal you used?
@archie_bol8153 Жыл бұрын
Any updates mate.
@acgolem Жыл бұрын
I've somewhat changed strategy and now trade more than just stacking. I realized the silver market is volatile. Can swing from $20s to $40s in a relatively short period. People's attitudes roll with the market. When it's going down they think it'll go down forever and nobody wants to touch it. When it's going up people panic and think it'll go to the moon. you can tack on a decent premium. I buy 100oz at a time. I aim to make $15 an oz. I use the profit to buy gold and reinvest in 100oz again when the market drops. Looks like a good time to play this game now. With inflation high people will be looking for inflation hedges which PMs have a history of being. At the same time, rapidly rising interest rates are sucking cash out of the economy and people will sell assets such as PMs to stay afloat. Should be some decent swings to trade on. I've been lucky so far that trade me has had free selling days around the time silver has been up, so I've paid no fees to sell. At this point I've got my initial investment back and have 1 1/4oz of gold essentially free. Has taken a few years. Currently I have an unopened courier bag of gold and silver. Market is up at the moment. If it gets high enough I'll crack it open and start listing. How about I make a video when I crack open the courier bag. I barely remember what's inside. Think it's all bars but may be some 1oz tubes. Hopefully trade me do some sort of boxing day free selling and silver carries on its current upswing and cracks $40.
@archie_bol8153 Жыл бұрын
@@acgolem thankyou for your reply. I’m trying to find out as much as I can as I am new to this. It’s been a bit difficult to find anyone in nz that’s willing to talk about stacking. Was also curious if trademe was a good place to buy. Any info is greatly appreciated. And yes do the unboxing please.