1930s Marx Lumar Automatic Scoop Powered Steam Shovel Toy Crane Restoration 4K

Рет қаралды 2,943,835

2 жыл бұрын

I purchased this 1930s Marx Lumar Automatic Powered Steam Shovel in September of 2021 on eBay for $79.50 after shipping and tax. I first saw one of these at a local antique dealers place and he didn't want to sell his. So I started looking for one needing some love and attention. I was extremely happy to find this one in such rough shape. It was complete minus one track and in terrible condition. The gear driven shovel did not work because of the wear on the gear shafts and the entire body was covered in rust. This video shows the first time I ever casted urethane rubber wheels and tracks, the process went really well, outside of some bubble and air pockets I got on the wheels, this was due to the mold rubbing out of rubber as the air purged, going forward I will definitely be giving the molds longer runners as a larger rubber reservoir, this should prevent any of that in the future. Also the color did not come out as expected and I assume I needed to use more dye as the wheels had a blue tint to them instead of being more black. I also put a summary in the beginning of the video, do you all like the summary? or should I leave it out going forward? Thank you soo much for the support. I'm getting a new lathe delivered in 6 weeks and then I plan on starting the Structo wind up tank. Have a great day! My favorite part of this whole restoration was making the rubber tracks and the green color of the truck.
Want to send Chip Channel something? Restorable toys, tools, etc..
Donations can be sent to:
USPS
Chip Channel Restorations
PO Box 1178
Grand Island, NE
68803
Need Parts??? Check out Gasoline Alley Toys! Use this discount code for 15% OFF !!!
www.gasolinealleytoys.com/
Discount Code: CHIPCHANNEL15
!!! Additional Vendors below !!!
Extra content on Instagram
/ chipchannelrestorations
Check out my Facebook Page
/ chipchannelrestorations
Watch my Previous Videos Here
1960s Rusty Structo Emergency Rescue Van • 1960s Rusty Structo Em...
1930s Marx Battery Operated ElectroMagnetic Crane • 1930s Marx Battery Ope...
1953 Tonka COE Livestock Semi Truck • 1953 Tonka COE Livesto...
1961 Tonka State Hi Way Department Mobile Crane • 1961 Tonka State Hi Wa...
1960 Tonka Sanitary System Garbage Truck • 1960 Tonka Sanitary Sy...
1962 Tonka Allied Van Lines Moving Semi Truck • 1962 Tonka Allied Van ...
1960s Tonka Green Dozer • 1960's Green Tonka Doz...
1930s Metalcraft Light Up Coca Cola Truck • 1930s Metalcraft Light...
1960s Buddy L Ladder Fire Truck • 1960s Buddy L Ladder F...
1962 Tonka Cement Concrete Truck • 1962 Tonka Cement Truc...
1955 Tonka Green Giant Brand Semi Truck and Trailer • 1955 Tonka Green Giant...
1930s Wyandotte Folding Wing Airplane • 1930s Wyandotte Foldin...
1954 Tonka Mobile Fire Department MFD Ladder Truck • 1954 Tonka Mobile Fire...
1953 Tonka COE Tow Truck • 1953 Tonka COE Tow Tru...
Share this video with this link
• 1930s Marx Lumar Autom...
Thank you for watching and supporting my Channel! Please like and subscribe!
Products that I use for ChipChannelRestorations
Bondic UV instant cure glue amzn.to/3yb7i9s
Nylon Punch amzn.to/2SGq3OC
Nickel Plating Kit amzn.to/3dhYfcJ
Ultrasonic Cleaner amzn.to/3506TZV
Blasting gun amzn.to/34IBGKl
Blasting Media amzn.to/3lA8lbT
Wet Sand Paper amzn.to/2SJVTKi
Deburring bits amzn.to/2GOyuox
Black Gloves amzn.to/34JREUL
Metal Polish amzn.to/34N7Cx5
Small Cut Off Wheels amzn.to/2GCPxdq
Buffing Wheels amzn.to/33NN34D
Buffing Compound amzn.to/34LfJdF
Lead Test Kit amzn.to/2GMehzF
Paint Stripper amzn.to/30UNGav
Throw away paint brushes amzn.to/3iNLOql
Camera Tripod amzn.to/2FmuGu8
Led back lights amzn.to/3iWMI41
Camera light amzn.to/30VlsMR
Camera light soft boxes amzn.to/2SGDMoF
DSLR Camera amzn.to/34FwCGI
Action Camera amzn.to/34FwCGI
Wireless Camera slider amzn.to/33Ns1mz
As an Amazon Associate I earn from qualifying purchases.
Buy parts from these sources below and ChipChannel can earn a commission as an eBay affiliate associate.
Toy Decals eBay shop - ebay.us/4y915Y
Decals, parts, toys, vintage items
Rivet Tool Link
ebay.us/GWcxu6
ebay.us/nzJmkh
#Restoration
#DIY
#Vintage

Пікірлер: 1 500

@inscoredbz 8 ай бұрын

I'm 52 and I want to play with it. Marx made lots of great toys.

@tigerfire828 5 ай бұрын

The charizard 😢, absolute mad lad

@kevingordon9192 28 күн бұрын

So relaxing watching him restore these classic metal toys. He’s the best. 👍🏽

@scaramouche1740 2 ай бұрын

The movement of the shovel is so perfect; no current toy works like that!

@joemulkerins5250 5 ай бұрын

One of very few men that knows how to tap correctly. Like a breath of fresh air.

@evert-jansterkenburg295 4 ай бұрын

Yes, Sir. Go forward, a little bit backward and than forward again, to make a nice thread

@douglasskaalrud6865 Ай бұрын

If you like dull taps, don’t use oil.

@johnwayne2103 4 ай бұрын

Masterful restoration. I love the simplistic mechanisms they made for children's toys. I remember all my Tonka Trucks as a kid. So much enjoyment from them.

@dananderson6847 2 жыл бұрын

The kids and I drove past the old Marx toy factory in West Virginia on Monday. So they were very excited to see this video today when we returned home.

@johncraske Жыл бұрын

Of course, the irony is that the renovated steam shovel is far, far better than it was when it was bought in the 1930s. Great work.

@amadine770 2 жыл бұрын

The octogenarian who once owned it must be proud of the restoration-by the way your work comes with no dramatic effects-its real to the core and believable.Keep them coming.

@ChipChannelRestorations 2 жыл бұрын

Thank you soo much! Some times I wonder who owned these as kids. It would be cool to meet someone that owned one of them.

@Farm_fab 2 жыл бұрын

@@ChipChannelRestorations it would be neat to go back in time to see children playing with these, but alas...

@amadine770 2 жыл бұрын

@@ChipChannelRestorations It would be a dream come true

@OnlyTheEd 2 жыл бұрын

Actually someone from the '30's would be called a "nonagenarian", being they are in their 90's....But......I doubt someone that was 2 years old would have a "new" toy such as this, so yeah.....an Octogenarian....🤓👍

@MadTrax572 2 жыл бұрын

@@ChipChannelRestorations do you have an Instagram page? I have a few old tonka trucks I’d like restored.

@sandymatthews9446 2 жыл бұрын

You absolutely amaze me. I am a 70 year old grandma and I remember my brother having some of the toys you have restored. I love watching you use your machines and making replacement parts. God Bless…

@user-zb4yj3cj2d Жыл бұрын

자네는정녕유를깜놀하게하는군나는70살소녀고동셍이족원한왠구츨 가지고

@AaronDidIt Жыл бұрын

No spray paint. No purchased replacement parts. No shortcuts. Chip Channel does it right every time!

@braxtonnelson7422 2 жыл бұрын

Each time I watch one of your restorations, I think, "Well, he's out-done himself this time". And yet, here you are, hitting it out of the park again! Thanks for posting!

@rosellabill Жыл бұрын

It is so relaxing to watch his work and the process

@ceecal 2 жыл бұрын

I am always amassed how you remember how to put all the little pieces back together again. Wonderful finish every time.

@MJKToys 2 жыл бұрын

Maybe he records himself taking it apart and uses it as reference...

@tommes55 2 жыл бұрын

... then look to a restoration of a watchmaker 😲

@TheyForcedMyHandLE 2 жыл бұрын

metal prep, CAD, powder coating, plating, molding, machining...I think putting the pieces back together is the least of his worries, lol

@PrometheusV 2 жыл бұрын

So, for those who dont know anything about Pokemon: The "Holographic Charizard" is the most expensive Pokemon card. A 1st Edition Mint one costs over 270.000 $ !!! And then calling it Char Lizard in the end... i laughed so hard :) Great Dad Humor I bet you freaked out MANY children that day Hahahaha. Even i had to pause the video in shock and checked what edition you had violated there ( I think that one was luckily only 10$) :)

@felipeleaodallatorre8240 2 жыл бұрын

I also paused the video to check. My heart sank when I saw the card and I thought "no... Something is not right"

@bjmorley 2 жыл бұрын

I'm freaked out he wanted to use it for applying filler!!

@geraldwinburn9288 3 ай бұрын

Another magnificent work on another kids memory.Sure would be great if you would perhaps give a guided tour of your creations one day,mmm?

@dougmackenzie5976 2 жыл бұрын

I've enjoyed your channel for some time and I just have to say, you're the best restoration artist I've seen on youTube. I am a former nuclear weapons specialist (I used to work on the warheads) and spent 30 years in aviation as an Airframe & Powerplant mechanic, working on C-130s when I was in the USAF, and built the world's most powerful jet engine, the GE90, for almost 20 years. I find your care and procedural discipline to be unparalleled in your field. You exhibit the same kind of care I took when working on nukes, or when I was building jet engines. You'd have a fine career in aviation, with such a disciplined and professional approach to your work. It is so refreshing to see it outside of my old fields, where it was compulsory, mandatory, and next to safety, was the highest priority. I'm retired now, and hoped to continue working on old airplanes as a hobby. But, nine hand operations took their toll, and I can't make my hnds work with the finesse required, anymore. So, it is with all the more pleasure to watch your work: It fills a great void in my life and it is very satisfying to see how much care you take in the restoration -nay, rebirth, of these wonderful old toys. Thank you so much, from the bottom of my heart.

@annapopok6105 2 жыл бұрын

Где

@miguelpina2006 2 жыл бұрын

You just wanted to show your job at nuclear weapons, isn't it?

@Slumberesque Жыл бұрын

Great, credible feedback and interesting in its own right. 👍 I’m glad you took the time to post your comment!

@dougmackenzie5976 Жыл бұрын

@@annapopok6105 Не твое дело, товарищ.

@dougmackenzie5976 Жыл бұрын

@@Slumberesque, thanks for your considerate response, sir!

@garyburgmylifeandtimes6354 2 жыл бұрын

It was never that good looking when it came from the factory. Definitely a concourse restoration! Outstanding job!!

@frankierzucekjr 2 жыл бұрын

When they made this one, so much thought went into that gear and how the bucket just keeps going and opens when it's at the top. Phenomenal job buddy

@tinydancer7426 2 жыл бұрын

They certainly do not design and build toys like they used to. Wish there was a toy builder today that would bring back toys that were built to last.

@aniquinstark4347 2 жыл бұрын

@@tinydancer7426 Did you forget Legos exist?

@tinydancer7426 2 жыл бұрын

@@aniquinstark4347 Well, you got me there. OK, I'll be more specific. Wish there was a toy car/truck/boat/etc. manufacturer that would build'em like they did in the 40's, 50's, 60's and 70's. Can't include the 80's because my son had aged out of my buying anymore than he already had and he was moving on to Star Wars ..... he rues the day he sold his Millenium Falcon, figures, etc at a yard sale/flea market. Little did he know that his daughter was going to be fan of all things Star Wars (not his son, just his daughter). I bought the Yoda and Ewok figures from him (and no, he can't have them, they're mine! 😁

@naziyamirbaz127 2 жыл бұрын

@Gigachad-mc5qz Жыл бұрын

@@tinydancer7426 noone would buy them since they prefer cheap plastic garbage. People used to be richer back then, now wages are pushed down cause greed

@user-pf6xb6sb3q 2 жыл бұрын

Колоссальная работа проделана!! Золотые руки у вас!!!!!!

@annkoehler8017 2 жыл бұрын

I'm just so amazed at the fact that if it has a part that's worn out, he can make a new one! Love this channel!!!

@mykeg2401 2 жыл бұрын

Can’t wait for the tank to be restored. It’s on the flatbed hopefully it’s up next! Great restoration as always!

@TheBonzomatic 2 жыл бұрын

Came here to say the same thing.

@mykeg2401 2 жыл бұрын

@@TheBonzomatic iv been waiting on that tank for awhile.

@addisonwilliamsjr4450 2 жыл бұрын

There are people who are good at stuff, and then there are master craftsmen. You, sir, are the latter! Your skill and attention to detail are amazing. Who would have thought that this toy would go from A to B like this? Thanks for the chance to watch you at work.

@kevinkane3891 Жыл бұрын

Good job , again. I can tell you love your work. It is so pleasurable to watch you put these old toys back in new condition. I use to play with a lot of these toys when I was a little boy. I was born in 52 and my brother was born in 49. These were the toys you had to play with because that's all there was . Amazing. Thanks again.

@lovelyhurlin6494 3 ай бұрын

The effort involved in that injection moulding of the tracks! Love it.

@user-ui4iv6qs2e 2 жыл бұрын

Великолепная работа! А пушистая красавица в финале ролика, вообще, бесподобна. 😀

@DrVenture45 2 жыл бұрын

I like the summary though I would shorten it a bit. I would very much love to see a documentary of sorts about how this passion all began. Magnificent work as always, Chip!

@ashleychmura4601 5 ай бұрын

I come for the kitty and stay for the restorations; I have to say you do some outstanding work on restoring of these classic toys.

@haraldhechler3557 7 ай бұрын

Great work on a great toy. I really appreciate your restauration work, because it is skillful and foremostly honest. No fake rust (on plastic and diecast parts...), no halfwit stories of burned-down all-metal-models, no surprise findings in the creek behind the house, no sawing-in-half-to-put-it-together-again-BS. Your "patients" are as authentic as your work on them, with perfect results.

@KirkHermary 3 ай бұрын

Am I missing something? Are weirdos actually doing things you mentioned?

@KirkHermary 2 ай бұрын

@@haraldhechler3557 yikes 😬

@KirkHermary 2 ай бұрын

@haraldhechler3557 that's mind boggling that people would make fake found in X and fake rust and stuff.

@zargonfuture4046 2 жыл бұрын

Fantastic colour.. Lovely restoration, the metallic suits the toy and makes it more of an object to look at than just a mere play thing...

@jamesalinio5277 2 жыл бұрын

Great restoration Chip, the coloring really pops out, and I like the idea of getting rid of the lead altogether, thanks for sharing

@DDmm8554 4 ай бұрын

Bloom. You're a lovely soul! Very impressive. I love your patience with your work and to the details. I do a lot of fabrication with modern grinders. But I need to rush through it because of time. It's very pleasant to watch this video.

@markkennedy5712 4 ай бұрын

I'm 74 and try to ride everyday. I think I'm having more fun than ever. Luckily I have great health and feel better on the bike than sitting at home. Keep at it.😊

@alconk7129 2 жыл бұрын

Most impressive one yet!! Even though the “contractor” stickers were crooked

@genemetz24 2 жыл бұрын

They come crooked. I have my dad's 1930s Marx Lumar Automatic Powered Steam Shovel. I will restore some day.

@Primus54 2 жыл бұрын

Morning Chip. Another fabulous restoration. I really like the crab apple color! Hope you spoiled Beaker on her 2-year old birthday last week! 😉 ~ John P.S. Like the new intro!

@ChipChannelRestorations 2 жыл бұрын

Good morning Primus54!!! The color was my favorite. And yup Beaker had a little party for her 2 year birthday on the 14th. Thanks again for watching!

@johndonlan5956 Жыл бұрын

Well, I was pretty sure that you did a great job in this restoration...... But when you are cat gave it the "sniff test of approval" -- that did it for me!

@hawthorne4028 Жыл бұрын

That paint job is incredible! Decals always line up....and I always look forward to seeing your well loved cat at the end; wouldn't be the same without him.

@jayconstantine5928 2 жыл бұрын

It is always satisfying to watch you as a craftsman who knows what he is doing, work, and end up with something beautiful at the end of your labours. Can't wait to see the tank!

@peterzito1372 2 жыл бұрын

Another astonishing piece of work chip so dedicated to detail

@ChipChannelRestorations 2 жыл бұрын

Thank you soo much peter zito!

@brianfpp540 Жыл бұрын

If you were a neighbour i would beg to come help out just for the sheer fun and satisfaction thats gained, thats priceless. I love my hobbies but could always use another lol, im 57 and havnt got anything like the cool tools you have

@drugansltd4344 2 жыл бұрын

2 seconds in and see a clip where you make your own tracks, Already 10/10 on the video

@deborahshinsky5360 2 жыл бұрын

After watching several of your videos, I have truly come to appreciate how meticulous you are in your workmanship, what a master craftsman you are, & how varied your skill sets.

@simonlopez9158 2 жыл бұрын

Cuánta historia guardada y tú lo vuelves a revivir para almirar gracias por tus vídeos saludos desde Tijuana BC México

@ChipChannelRestorations 2 жыл бұрын

¡Gracias!

@akshayjugdhar 2 ай бұрын

That carlizard card, Absolute Barbaric.

@connorgraham7738 2 ай бұрын

Charlizard

@jimmcdonald8394 Жыл бұрын

How enormously satisfying it must be to bring an old discarded toy back to life. They just don't make em like that anymore.

@tatiannazutania7751 2 жыл бұрын

As usual, Chip you show your mastery. I'm just not a fan of the green color you used. I like the old green. However, it is very shiny. A lot of work on this one and you did a beautiful job.Thank you for sharing.

@TrayChester01 2 жыл бұрын

30:30 Those aren't wingnuts. THESE are wingnuts! I love how they used to not just be toys, but also introductions to science and physics.

@ChipChannelRestorations 2 жыл бұрын

LOL, I was really impressed with the quality of this pressure pot for sure!

@redrufus444 4 ай бұрын

Toys were sure made better back then..!!

@Team_Rockit 2 жыл бұрын

This may be impressive, but what is more impressive is that he used a $200 or more worth 2nd edition base holographic Charizard to spread his epoxy. You sir are a man of culture, I concede to you. Dear Lord!

@geo2cv6tron14 2 жыл бұрын

The before / after is really impressive 👍

@ChipChannelRestorations 2 жыл бұрын

Thank you soo much!!!

@miker8915 2 жыл бұрын

Absolutely amazing, love the green apple sparkle color! I enjoy watching all your videos. Thank you for sharing

@LordPai 5 ай бұрын

my heart. that charizard card. But seriously. Amazing restoration.

@gammock4026 Жыл бұрын

I had an almost identical Lumar power shovel for Christmas in 1959 when I was 4 years old. It was in red and black livery. I still have it in the loft somewhere. It is in poor condition but NOT rusty. The rubber tracks have perished and the whole mechanism has broken e.g. the lower narrower boom has come free from the interior of the cab and you have to manoeuvre the boom and bucket by hand. I would love it if you were able to restore it to its former glory! I have only just discovered your channel and have seen this and one other video so far - absolutely amazing work!

@mjbirdClavdivs 2 жыл бұрын

I really didn't care for the summary. It would be better as a KZfaq short used as a teaser for the upcoming video release (like a day ahead of time). Congratulations on the urethane casting! I assume that was a positive pressure vessel and not a vacuum pressure? Well done, as usual! Thank you very much!

@chrisdean6700 2 жыл бұрын

This guy is nothing short of a magician! Great restoration job!

@OWNPROGRAM 2 жыл бұрын

Dude just sat there and used a $670 holographic charizard card to spread jb weld. Epic.

@Ethermanx 2 жыл бұрын

I almost passed out

@Xxtz-ur4hj 2 жыл бұрын

great job with professional equipped workshop with every tool possible anything can be done

@keithmiller3120 2 жыл бұрын

I loved steam shovels and cranes since I was young… still love them today as well… nice job 👍🏻 on this reminds me of the one I had… keep the videos coming enjoy watching them all

@mattconnor6779 2 жыл бұрын

This restoration is intensely beautiful! And the function is so cool!

@aceallenk Жыл бұрын

Now that's a dandy. Can't say I ever saw one of them before, but sure enjoyed the resurrection of this one. Beautiful..

@kath5201 2 жыл бұрын

I played with so many of those! I was quite a Tomboy then. This restoration was perfect. The Cat approves.

@tomswindler64 2 жыл бұрын

Really enjoyed this video the restoration on this shovel is one of your best.to me could not ask for anymore.keep doing your thing and keep bringing back the past 👍👍👍😎😎😎

@tstrong7910 Жыл бұрын

Beautiful job as always. I love these long videos! Please keep them coming!

@Godwinpounds4333 Жыл бұрын

Hello how are you doing?

@user-zb4yj3cj2d Жыл бұрын

1930년도 완구수리 ?

@capers72424 2 жыл бұрын

The summary was great, it gave the highlights without me having to watch an hours worth of video!

@pauloconnor7951 2 ай бұрын

I was stunned !. That is so lovely. Spiritual infact !

@Chris65645 2 жыл бұрын

You're always doing cool restores. thanks for the content. 👍

@Datrebor 2 жыл бұрын

What an amazing restoration, loved the amount of time you showed of the sand blasting the metal and the powder coat baking. That turned out beautifully better than new. I want to watch you restore the tank too. That is going to be awesome to watch.

@barrybrennan1045 4 ай бұрын

I was raised in Port Colborne and your video provided some unique perspectives. We swam in the canal and ships such as these were often taken for granted.

@robertporch8895 Ай бұрын

I watched this for the second time. It's an excellent restoration of a vintage toy. This is the kind of toy I had as kid in the 50's when things were quality made in the USA.

@mrcamelpmw 20 күн бұрын

you do realise that just about every other country on the planet also made quality toys too

@Unionboggle 2 жыл бұрын

Your mold-making skills are top notch....even with the "flaws." Casting is hard to get perfect without a lot of practice and learning from mistakes. I very much like watching your process....I can always tell when the JB weld is going to be broken out. Of all your tools and equipment I love the tool-less bit changing CNC..that thing is rad! Can't wait to see the lathe in action soon.

@dave3156 2 жыл бұрын

I look forward to each new installment. This one has been one of your best!!! Wow what a transformation!!! Nylon sure makes a mess of your CNC. So what is the next evolution? Press brake to start making new sheet metal parts for the ones pitted too much. Outstanding craftsmanship--what a talent!!!! Great job Chip. Looks like the junkyard is full so more to come!!! Can't wait!!! Thx for sharing your passion!!!

@user-cz3ey6hu2g 29 күн бұрын

Awesome restoration. After watching many of your videos I am always amazed at how the toys turn out. ✌️

@renevanginneken7217 6 ай бұрын

Being in the “real business” of earth moving machinery I started collecting tin cranes and have quite a nice collection now. With joy and admiration I watched this movie. You sir are a tin excavator wizard. Well done!

@andrewturnbull5897 2 жыл бұрын

Magnificent! Restorations of Tonka style toys to another level of amazing! Great work!

@lostonwallace1396 Жыл бұрын

One of your very best restorations! Lots of work went into making that one whole again!

@svipace8220 2 жыл бұрын

This is something else! Can't find a word to describe it. Just watching takes more than an hour, I can't imagine how much effort and time you spent. You've asked about summary in video description. I liked it. Love the kitty.

@Dan-dj3cx 4 ай бұрын

Brings back memories of my favorite book as a kid. "Mike Mulligan and his Steam Shovel"

@JC-jc2rv Жыл бұрын

Realmente es hermoso lo que haces con todos esos juguetes, si aquellos niños que jugaron con esos juguetes lo vieran hoy en día seguro rejuveneceria. Gracias por hacer lo que haces.

@jimthompson9992 2 жыл бұрын

Incredible! Incredible restoration! What more needs to be said? Well done.... well done indeed! Take care, be safe and God bless!

@thedolt9215 2 ай бұрын

I like your restoration a lot… But even more, the production value of your video is just outstanding!

@Fe_Republik 11 ай бұрын

Раньше была такая советская игрушка, как я мечтал ребёнком в восьмидесятые о таком экскаватора который копает при повороте ручки, но мне купили большой железный грузовик с открывающимися дверцами и капотом, я тогда мог целиком садиться в его кузов и отец ругал меня ремонтируя в который раз отломанные от моего веса колёса у которых между прочим на металлических дисках была мягкая резина с протектором.

@annettemalaski1967 2 жыл бұрын

You nailed this perfectly! The color is super! The fabricated rubber spot on! Now do the WW 1 looking tank. You do not have any military machines that I can tell. I was hoping you would do it for the Memorial weekend.

@hotelgulf 2 жыл бұрын

That was so satisfying to see such a beautiful restoration. Every time you do one, it’s like getting back a piece of time. ❤️

@hodwooker5584 Жыл бұрын

Thats a real interesting paint job on your cat!

@Sobitiya_ Жыл бұрын

Железные игрушки 👍👍👍 Как это было давно👍

@tomtbi 2 жыл бұрын

Quite an involved restoration...

@ChipChannelRestorations 2 жыл бұрын

This one took some additional time. Thanks soo much for watching Thomas Barnard!

@abhishekdwivedi5521 2 жыл бұрын

Perfection !!! Your paint finishes are probably the best on youtube bro. Amazing work. I bet this didn't look this good even when it was new. Beautiful.

@HenryTilton 2 ай бұрын

Always curious as to a video like this and the 1.3K dislikes.. What are they disliking? Great job.. Nice video..

@waynepennington2769 11 ай бұрын

Your the best metal toy restorer in the world you should keep everyone you ever restore because they are one of a kind. Done by the artist that you are you might not tute your own horn but you are the best. Keep collecting my friend an don't get rid of them.

@thisolesignguy2733 2 жыл бұрын

Man, that was awesome! Although the blue pickup will always be my favorite, I still love all of the projects. I just get blown away by how far your channel has came over the years. I subscribed back when you only had about 100+ people...and now you're at 287,000! I'm glad you set up this channel, it's absolutely one of my all time favorites.

@steve_weinrich 2 жыл бұрын

A truly impressive restoration! Great job.

@randyhuggins6480 2 жыл бұрын

this is my therapy after a long week i so look forward to your videos

@samadkins843 Жыл бұрын

you did a great job restoring the crane.

@raywood8187 2 жыл бұрын

I love watching the process and seeing your skills grow as your workshop grows too! This turned out really nice and I think the blue tint actually makes the wheels look metallic so that works. As for the beginning summary, it feels like a bit of a spoiler to me so I FFwd past it because I want to wait for the good stuff.

@UnsungPride 2 жыл бұрын

That seriously hurt my soul when you used that Charizard card for the pitting…whether it was a fake card or not it still hurts 🥺🥺, however, great restoration video as always.

@carolpascua1848 Жыл бұрын

I literally screamed, "NOOOO!!!" out loud 😧

@doralefleur531 Жыл бұрын

@user-ni6ex4th6j 3 ай бұрын

Wow how do you keep all those tiny parts straight. That's amazing. You must know these little trucks and cars very well.

@MrFb65 3 ай бұрын

Wow. I can see your videos all day long 👍👍

@raywilson800 2 жыл бұрын

if you haven't thrown out those old tracks, try an experiment for me. Clean them good with rubber cleaner then soak them in baby oil for a couple of hours. I bet they will be good as new. Love your videos.

@ChipChannelRestorations 2 жыл бұрын

Thanks Ray Wilson!!! I will give that a try, I enjoy trying to reuse the original parts as much as possible!

@widgetsmom1946 2 жыл бұрын

You are fascinating to watch and your work is absolutely beautiful! Thank you for saving all those toys that I remember so well. ( well most of them. I'm not that old 😂) I still have my "buddy L" dump truck I asked Santa for. It was a little unusual for girls to play with trucks and Tonka Toys but I loved it. I'll explore mamas attic for the Tonka jeep I had too.

@woundedbear64 Жыл бұрын

I've never seen such a complicated toy, especially from the 1930's, awesome!

@larkinmckeithen7787 Жыл бұрын

I love your restorations. Please don't stop!! You restore these toys to the way they should've been the whole time. I love it!! I would buy any of them!!