So happy that I found you. You’re really straight forward no fluff 💯💯💯💯 !!

Thank you so much for all the helpful information. So very much appreciated

Thank you for sharing this info about the seams. I had no clue and I had just started looking at tins

Thank you so much for this info!!

You the best thank you so much for giving this information!

Your teaching/training/educational videos are fabulous. Always maxed out with detailed helpful informative information. Incredible work you are doing. Thank you so very much for sharing your expertise, knowledge, extreme wealth and deep well of professional experience tips and tricks to know. So grateful for your generously sharing your great creative ideas. Best on the net for real life candle making helps. Mucho Gracias

Thank you very much for sharing!

Very informative!

Thank for the tip. I will now use a coaster under my metal tin candles. I have some metal tin candles and i will use a coaster that will help with the heat getting hot.

Thanks for this valuable information

Sou do Brasil e venho adorando seus vídeos! Agradeço por compartilhar seu conhecimento!

Your videos have gotten so good!!

thank you!

I use stainless steel dog buckets, the 1 quart size. You can pick them up for 3.50$ on any good dog show website. You can put a nice label on there and presto, no leaks, no issues and you have a cute dog bucket after the candle is done burning. With stainless steel it cleans up well after your done with the candle. (Yes, I used to show dogs and learned about them through dog showing)

Thank you

Thank you I was about to make candles until I realised the tins I got have a seam on them so just bought seamless tins instead

I put my candles on a silicone potholder to insulate it and keep it from sliding around.

Nice

Appreciated this review, thanks for your expertise. Question. You mentioned wax melts in a tin. I have a few sitting idle in the box, 8 oz silver, flat bottom which I really didn't want to use for a soy candle. How many clam shell melts do you suggest to place in the 8 oz. tin. TIA...

Seattle is July 18, 2020

Hi Jeff. What's the link to the video that shows how to seal the seam tin. I already got the seam tins before seeing this video 😔 I can relate to everything you said about it coz each time I pour in my melted wax, half of the wax always pour out. I actually thought it's from the production company, I thought it wasn't properly crafted and what I do to make sure I get my wax leveled to the point I want is this; I always have a metal plate-like placed under my tin then after I pour the first round of melted wax in the tin to the level I actually wanted I'd leave it till the following day then re-melt the ones that leaked on the plate placed under the tin and once it's fully melted, I pour it in the tin again I.E the already cured wax

What wicks would you recommend for 4oz, 8oz and 16oz tins?

Hi Jeff! As always, thanks again for uploading informative content for us!! Question: I’m having a hard time getting a strong HT from my candles. I’ve purchased your ebook and your method has helped me with the sinkholes and the scent has improved. However, I can still only smell it in one room and can only smell it while it’s burning. Any advice on increasing my HT? I’m using IGI-6006, 10oz with 1oz of fragrance. Melting to 185, adding FO and 175 and pouring at 170 into the ball crystal glass with wicks from a local candle supply. I’ve ordered more wax and a wick sampler kit to see if that helps. I have no idea what else to do lol. Thanks in advance!!☺️

How do you figure out the shipping on candles I am in the line of selling 2 or 4 oz candles. I saw your video on pricing and was looking for the video on shipping fee.

Hi Jeff. I’m using 4oz tins from CS and tested HTP 73 and 62. I find the 73 is too hot by 3-4 hr burn but has a better HT then 62. What wick sz would you recommend?

Is it some kind of sent booster I can use for my candles?

I am new to candle making and I am having trouble with the wax melting completely to the bottom . I am using an 8oz round tin with double wick, 1 wick is not enough for the right pool but 2 almost seems too much! Do you reccomend using a smaller wick? Or could it be the wax ?

Would you know how to use bluing mica on tin cans?

Подскажите, пожалуйста, где можно приобрести такие баночки для свечей?

Thanks Jeff, GREAT VIDEO. I admit I recently took tins off of the many options I offer, simply for the fact that I need to do some additional research. I use tins from CS, and I noticed if I have a bunch pre-made and sitting on my shelf (not for very long) they seem to rust around the top. I did notice that this seems to be possibly isolated to citrus type FO's for example lemon and lavender. I also have a Christmas Tree scent. So it's not every one that rusts, but it's enough of a percentage of my scents to stop because I do want an excellent product for my customers. Ever heard of this? Is there anything to do to counteract this? Thanks!

I just bought 8oz black matte tins from California candle company will these be ok

I’m a bit confused with regard to concrete candles. What is the best Sealant you can brush inside the vessel please

hey I'm making candles can u help me ..does gel food coloring work

Please use all the necessary tools regarding the manufacture of candles. Be grateful and grateful.

Should these tins burn completely (no leftover wax)? I have been wick testing 6oz tins and i am finding the melt pool is perfect, good HT, but the tin doesn't burn down to empty. There is about 1/4 - 1/2 inch of wax left over but the wick is burned completely out.

I just made a bunch of soy candles from old tin cans. I don't know what to do next to make them safe. I thought I just decoupage or decorate them. How would you recommend I make the ones I've made safe? I saw a video where someone used air dry or polymer clay all around it on outside. Help! Blessings from Indiana

Which ebook is for coconut apricot

Also, how do I join that group

I didn’t know wooden wick had 8oz I ve seen there smaller tins e.g matte black and copper and gold ones.

Would you recommend adhesive cork protectors for the bottom of these tins to add a heat barrier to the bottom of the tin as a safety precaution?

Which wick would you use in an 8oz tin using soy/paraffin

Which candle wax you use for these tin?

Hello, there are those who write that some additional substances should be put into it to make paraffin candles. (Like stearin) Is this necessary for the candle we will pour into the jar? What percentage of fragrance should we put in? Does soy wax or paraffin give more fragrance to the prepared candle?

I have a few old honey bottles bought from the store. I made candles in it and the bottle cracked. I know it did because of heat, but so many people make candles in glass jars, could someone please tell me what I did wrong? I think the jar cracked when the wick touched the jar..

You didn't list any tins that you would recommend....I'm trying to find good ones on Amazon, and its really hard to find! Please send us a link of seamless tins for candles please and thank you handsome 💖

Wanting to use these for wax melts. Anyone got tips on them not melting/sticking together?

Can I cut my wine bottles and use them as tins?

hmmm i was going to use old 200g tobacco cans. after seeing this about the seam..... i don't think i am going to do that anymore..... now i have to find a 200g seamless candle tin the size of an old tobacco can :(

Hello Where do I get tins that can get customized with my name brand and logo? I’ve seen a few websites with nice tins but don’t offer customization. Thanks!

I set a candle tin on fire Like i was experimenting (well i was just Messing around) i snapped a chopstick in half and put the 2 pieces elevated above a lot candle Then i took another candle and the wax melted idk what i was expecting Then i spilled the was Scraped it off when it cooled and put the candle tin above the fire again then i added the was i spilled back in to basicly undo me spilling and this time instead of trying to move the candle with the molten wax away from the flame i just blew out the candle and let it cool All normal Then i took a empty candle tin and place it upside down It started smoking so i moved it away from the flame It fliped and it was on fire Then i did it again outside this time And it started smoking again but when i fliped it it wasnt on fire so u did it again and left it above the fire longer and this time i didnt even flip it it just catched on fire It burned out like 10 seconds later and the underside didnt catch on fire I dont think this could happen normaly sience it was in direct contact with fire and it was trapping the heat but if this does just happen sience it doesnt spread i dont think its a fire hazzard

Jeff do you know where DreamVessels ship from? Are they in the US?

Have you used the paint can style? Are they seamed and are they reliable?

I bought the 8 oz. Tins from candle science but I'm having a problem with them rusting around the top of candle even before their lit. Anyone gave any suggestions?

I placed an order with Candle Science for tins and the straight sided libbey tumbler and I like both, but unsure about jars. I am part of the DIY group on Facebook and have seen many posts about jars breaking when being shipped to customers, so when I placed another order recently I chose to get just the tins, but I am wondering if I should have added the jars as well to keep both options. Do you have any suggestions on how to package candles well so they wont break in shipping?

Any experience with tins rusting after you pour a candle in them? I made a few lavender candles, and the entire rim of the tin where the soy wax touches turned to rust, and turned the wax orange when burning! Any insight into this?

Has anyone used the Wooden Wick Co tins? Do they have any reactions to vanillin? I know Candle Science's tins do.

good but talked a little too much about the seam in the tin, phew.