I'm a stay at home mother of 3, and because of your video I was able to diagnose and replace the coupling all by myself! I normally would have called a service repair guy and been charged out the butt. Thanks to you, I saved money and built confidence! Thank you!

You probably will never see this comment but seriously THANK YOU FOR THIS!!! We have a baby due in two weeks and haven’t been able to laundry in a week. We just moved into a duplex so we’d have more space but had to buy our own washer and dryer. Could only afford a $135 used set and just about broke down because the washer wasn’t spinning. My husband followed this video and now it’s working like it’s brand new, seriously... I don’t think anyone would understand how much this has helped us 😫😫😫 I MEAN IT WAS A $5 FIX. WOW! THANK YOU

I have that EXACT MODEL Washing Machine! I bought the coupler, took it apart and noticed that my Coupler WAS NOT DAMAGED. I changed it anyway. Then upon re-assembly I found the REAL PROBLEM: One of my Pump Retaining Brackets was Rusted and Brittle causing the Pump to dislodge from the Motor during the Spin Cycle which made the washer make that "same sound" when it's not turning. I'm getting another Pump Retainer Bracket tomorrow and my issue will be resolved. Thanks Chris for pointing me in the right direction!!!

Washer motor coupler video was spot on. Much simpler, straightforward than other videos. My wife thanks you too ! Aloha

great video im 78 yrs old (young) lady i did it all by myself thanks chris

$8.00 part ... 2 day wait from Amazon... 20 minute total repair. Priceless! Thanks Chris!!!

Thanks.for the advice I'm 82 year old woman and got it fixed with your good help

Wife got the part, looked at video several times, instructed me and fixed for $5. Took us much longer but well worth effort. Couldn’t have done on our own. Thanks.

January 2024, this video is still helping people. Thank you

If I could give you an Emmy for this video, I would. Here it is, eight years down the road, and you're still helping people solve this problem in a no-nonsense, straightforward manner. Thanks and gratitude for your video assistance today. And that sound you provded - exactly how mine sounded last night. You're the man.

Such a thorough lesson for us all, always with your calming "You got this" tone and visuals that are so beneficial to the mechanically impaired. Thank you!

I've been watching your videos for over 5 years. My sister actually was the one that mentioned watching them as she saw your videos on how to super clean the windshield. I work on family and friends vehicles and she knew your content would be something I would enjoy watching and very informative. I haven't missed one since. Though I can't believe I never stumbled across this one with the washer repair. I have a front loader now, but I remember working kenmore machines with my dad back in the day and changing these couplers. Wish we thought of a jack stand used a cinder block. Lol Still watched regardless of what's being fixed. I remember when the videos were labeled for difficulty and other changes. I'm glad you keep your older content, it's nice to go back and watch from time to time.

OMG, you're AMAZING!!!! My daughter and I fixed our washing machine using this video! Our problem was exactly the same as in the video (right down to the noise it made), including how the piece broke! The video was easy to follow which saved us HUNDREDS of dollars (slight exaggeration). Who needs Geico when you have ChrisFix (not the best analogy, but you get the gist of what we're saying). THANK YOU!!!

Great job with the camera angles and editing. 2 of the most underappreciated elements of a great fix-it video. Thanks for the effort!

You rock, bro. I've been fixing stuff at home for a long time now, most repairs have been relatively easy but I'll tell ya - it often takes longer to find a video that is clear, fast and minus all the blah, blah, blah than it does to do the actual repair! You provide perfectly clear, easy to follow, easy to see directions with no ten minute intro featuring your dog. Not that I have a problem with people's dogs - I'm just here to learn something! The Repair Clinic video for this same fix instructs people to remove the case! Oh, my god, why? That's a huge waste of time. Also no need to detach the wiring harness, which they also advise, though at least that only adds a few seconds. I found it best for me to lay the washer down on its back. The rest was no sweat. I paid 8 bucks for the part, obviously up in price from 8 years ago. For people never doing it before, don't expect 10 minutes to fix, though. Took me an hour, but that includes cleaning the underside, gathering tools, setting up a light, disconnecting hoses, putting it all back. I call that a win. 8 bucks, one hour - thanks, man. I'll be checking your vids first in the future!

Just had this exact issue with our kenmore. Thanks to your video, problem solved. Thank you Chris

Voice: good & clear Lightning: good Instructions: easily understood = like.

I would sincerely like to thank you for this CLEAR and EASY to follow tutorial! Replacement part came in the same day and now my clothes are being washed, as we speak. Once again, THANK YOU!

I was about to buy a new washer when I found your video. I'm not a mechanic or a regular handyman, but your video was clear and my wife is now washing laundry again with our 20-year-old Roper washing machine. Thank You.

THANK YOU!!!! You helped me diagnose and fix my whirlpool washing machine tonight. Although it took me 2 hours because I couldn’t align the motor back (I ended up putting the coupler directly into the machine and not the motor), I made it work!!!! The whirlpool design isn’t as good as the kenmore one. I had to ask my brother to hold the white plastic pump the entire time lol. Thank you thank you!

I wish I had seen this before I gave away a 1200 dollar washer lol

I never knew that Chris fixed a washing machine.

We will soon see a new video starting off as “hey guys Chris fix here today we will be engine swapping and turbocharging this here washer”

My washer has been dead for a year. Ive had to go to the dreaded laundry mat since then. After watching this video I fixed my washer in less than ten minutes. Thank you so much.

First time seeing him not working on a car 😂

I just used this video to diagnose and fix my washer! It was clear and easy. Thank you so much, I am incredibly grateful to you for sharing this resource to help myself and others be able to fix our own appliances and keep them out of the landfill. This is a Kenmore from 2003, still going strong.

I want to say thank you so much.. I am a single female that will try anything. My washer was going and heard the exact noise that was on the video.. I went and bought the part and fixed it myself.. I was so excited.. my kids call me superwoman 😊

I’m blown away, I been watching Chris fix for years about my car. My washer just broke yesterday, it makes a horrifying grinding noise, I researched it and couldn’t quite describe my issue to get the right results. I looked at one video, it was replacing something up top with the control board. I was so upset thinking about costs of a new washer, giving up and ready to turn off the tv, then the next video came on “hey guys Chris fix here” I perked up so fast, seen a similar model washer and the noise sound was the same sound I was hearing, then he said it was a pretty cheap part 👏🏽👏🏽👏🏽🙌🏽🎊🥳🎉🍾 👏🏽👏🏽👏🏽once again, Chris fix saved the day! I had no idea he had this type of content. I’m so happy. Please, Never stop repairing things bc you are out here saving lives! I am grateful. Now I can clear my search bar for a new washer and start searching for that coupler. 💪🏽 You are the BEST!!

Thank you for posting this! I watched this excellent friendly, low-key, straight-forward presentation, ordered the part, and got my machine back in operation in about a half hour (took my time). The jack-stand idea is genius!

$110.00 dollar repair, done for $8.00. I owe you a couple beers bro. Thank you!!

thanks Chris. Wish I had watched this before I took the entire washer apart!!

Thank you so much for your video! I was able to fix my washer with your help. My coupler looked ok until I took it off. It was stripped out inside. But thanks to you demonstrating the sound a bad coupler makes, I proceeded with confidence. You were the only one who did demonstrate the sound of a bad coupler. Thanks again.

Yay I fixed it myself! The trick is making sure it's pushed back far enough so you have easy access to the bottom side.

@ChrisFix - You taught me car repair and gave me the confidence to do so much more than I ever thought I'd be able to do on my own in my very own driveway, but I must admit - I never ever would've thought you'd show me how to fix my washing machine as well. From the bottom of my heart - THANK YOU!!

Who would've thought I would be watching ChrisFix on how to fix my washer. lol

Like another comment I saw, I’m a stay at home mom and my husband works out of town 4 days a week so I try to figure things out so he doesn’t have to when he is home. I just want to thank you for this video with which I was able to quickly figure out what part needed to be ordered. This is the highlight of the internet…don’t have to call Dad, don’t have to burden my husband, and don’t have to pay lots of money to a repair person. Thanks again!

This was a pleasant surprise. I am so used to you working on cars Chris. Nice video.

Chrisfix only not fix cars but fix washing machines as well (2019 anyone) EDIT : Whohh thanks for 215 likes❤

I know its been about 5 years since you made this video. I want to thank you. Mine broke down last week. And your video solved the problem. Thank you.

Hey man, my washing machine took a crap a few days ago. I looked up videos and figured out it was the coupler, but they had me thinking I had to take the control panel off and remove the outer shell or whatever. Soon as I got the coupler, I went back to KZfaq to follow the steps, and I found your video. You saved me alot of time, and I now have clean underwear. Many thanks.

haha, only chrisfix uses jackstands on his washing machine

The farther back you can lay over the machine, the easier it will be w/o having to remove the cabinet. Beyond 45º worked well. The weight of the motor will assist in re-seating the motor to the transmission. I used a dab of dishwashing liquid on the plastic tabs of the coupler to make it easier to slide the motor onto the seated coupler in the transmission. A rubber mallet is a must. Not quite the "5-minute job" Chris billed it to be, but still HUGE cudos to him for providing this video and enabling me to avaoid a call to the Maytag [in this case, Kenmore] repair man! Thanks, Chris!

I speak for a lot of people when I say thank you for making this video.

I have an older whirlpool top load washer from the early 90's that recently stopped working. It filled and drained the drum like normal but neither the agitator nor the drum would spin. The clothes basically just sat in still water for 15 minutes. Thankfully my washer design is almost exactly like the Kenmore in this video, so every step that Chris does matches with my washer too. I checked under the washer and found lots of shredded plastic and broken prongs from the old coupler. I knew immediately that I had the same issue from the video. Every step was the same as Chris described, except the coupler I used was really hard to get on the motor and transmission shafts. that caused a 15 minute job to turn into 2 hours. I had to use a hammer to get them on, and it still took well over an hour to get them both on. After that everything else just fell into place. I'm so thankful for this video, this video and an $8 coupler saved me from having to spend several hundreds of dollars to replace my washer. It works just like before! I'm glad there's a channel likes Chris' that encourages regular people to perform their own repairs.

Thanks!! Best video I could find for fixing my washing machine. Instructions worked perfectly. Very detailed. Excellent instructional video!

Hey Chris! I forgot to thank you for this one, saved me tons of money instead of trashing my old washing machine I found your vid and knew it would be a good fix. Mine had the exact same problem, just my motor was in a different location but it turned out to be such a simple fix, and I can keep my washer longer now! Thanks so much man!

I’m stuck at home with pneumonia and my washing machine won’t spin. I watched your video and ordered the part from Amazon. Even though I’m dazed and short of breath from the pneumonia, I was able to prop the machine up, pull the motor off, and successfully change out the part. I still feel like crap, but at least I don’t have to smell bad, too. Your video is the best. Thank you very much!

I am a pro appliance tech with my own business and I sent this vide to a customer to do a self repair and they said it was excellent! 5 stars

Thanks for the vid, Chris. This is why it's awesome to have a back-catalog of your old stuff -- there are still a TON of these old Kenmore washers around, and they're increasingly likely to need this type of simple repair. This is why I've watched your channel go from barely 5 digits, to nearly 5 million subs.

Ok so I followed your video exactly. you explained everything so well. I can officially say I fixed my washer by myself..with some great directions from you of course lol. thanks!!!

Over 7 years later and you are still helping people. I followed your video and with just $20 on the part I was able to save hundreds. Thanks so much!

I was able to fix my washing machine thanks to your video (03/04/2023). I have never even heard of this part (and my uncle used to be a repair man for all appliances. RIP). My washing machine was 30 years old, but for mine, the plastic arms had broken like the video shows, but also my black rubber piece was totally worn out and actually it had big worn out gaps where these arms go into; so it was a double failure of that part. Thanks for doing so well on explaining this process. THANK YOU!

I like how you don’t only work on cars but other things too

Thanks for the great instructional video. Took mine apart in less than 3 minutes with your instructions, ordered part now $7, waiting for part to arrive tomorrow to install. Thanks again. Can’t believe it was that easy.

OMG! I know this video was published years ago, I just happened to come across it. This was the exact issue my Washing machine was having. I was ready to just scrap it and spend hundreds of dollars on a new one. My part cost a little more ($30), but I was able to get it today and swap it out thanks to this video. Chris, you are the man!!!! I'm now a subscriber.

You rock!!! 🎉 9 yrs later… and your video is still the best ever! Fixed mine thanks to you! Thank You! ❤

I bet that can hold a whole bunch of soapy wooder.

Thank you for this video, it was awesome!!! My Dad and I just fixed our machine. Not sure where you are but here in Ontario Canada our part cost us $ 27.58 😬 but hey better that than a $900 on a new machine!

I know you did this video tutorial 6 years ago but I just found it because I have the exact same model number washer & dryer as you do. Should I ever have this problem in the future, I have this to reference how to fix it. So far, the only thing I had to fix was the broken auger (the top part of the agitator) which was not spinning. That was one of the fastest and easiest fixes I've ever done on a washer. Like in this video, my repair only costed me $6.00. What needed replacing were the four dogs inside the auger. Only tool needed was a ratchet with a 7/16 socket on an extender. Thanks Chris for doing this fix.

I owe you at least one case of beer. I couldn't get a repair company to come out to fix our washer. We have three adults and one newborn baby in the house, we needed our washing machine. Your diagnosis was spot on. The Amazon part number was right. Your step-by-step instructions where also spot on. The only difference in my machine was that there were only clips and not bolts holding everything together. 10 minutes start to finish. Thanks Again!

On the one hand you made that look way easier than it was! 😅 On the other hand, and more importantly, this video was a life saver! Well shot with clear closeups - nicely done!

Thank you!! I've got to see if I can find the part but this sound exactly like my issue. Whether this does or does not fix my issue, wanted you to know that I think you did a great job with making this video. It's very clear, understandable and you make sure we get a good look at the parts on the machine.

Thank you so much. I just followed your video and saved $800. I was about to order a new washer; but thank you to you I only spent $7.40 for the part. Thank you, Thank you a million times.

CHRIS...YOU ROCK !!!! Own a 30 yr old Kenmore-70 series but basic principles still apply...your explanations are clear, camera angles good..had to use jackstand since motor asm is 4 in t. Parallel to floor,liked spinning shaft technique ..i venture i saved on a $165 svc although coupler was $22 from Sears parts direct...THANK YOU

Hey there Chris. Just completed the identical repair to my washing machine. Identical machine btw. Mine was a $20 fix though. Ended up going to an appliance sales/service store to buy the part. Maybe could have found it cheaper somewhere else but had to get it done pronto. Thanx for the very good graphics and explanatory steps. From tip up of machine to lowering back down to test, 27 minutes. That doesn't include my driving to pick up the part, LOL. That took 11 minutes.

Me: ooh a chris fix video *looks at title* Me: huh interesting

Thanks Chris! I always follow your car fix videos and when I saw this I knew I was good. Really thought the motor or drive went out on it and dread having to buy a new one since I hear the horror stories about those. Love my old 2003 Kenmore! I owe you so much you don't even know. The fact that a 78 yr old lady used your video to fix hers literally brought tears to my eyes. God bless you bud!

This happens when you overload the washing machine..Ive replaced 4 couplers.. on the same washing machine, still working after 11 years..this is now 2021 and the couplers cost $7.00 on amazon.. this is the best video i have seen on youtube for this fix..thanks for sharing

Well done sir! Worked just like you demonstrated and saved me a bundle! I’m not that handy and yet, your video gave me enough confidence to get the job done. Thank you.

Ahhhhh finally. Most mechanics fix all kinds of things around the house and we finally get a video. Love it hahaha!

Chris I can't thank you enough man. Same exact washer same exact noise. Wife called me frantic when I was at work. Hopped on KZfaq after I researched the potential problem and there you are in a washing machine video and not a car one haha! Just finished putting in the part and we are back in business. From one Chris to another You are a lifesaver dude! Thank you!

I just followed your video to replace the coupler and see the magic. All done in an hour under $15. Great video. Thank you

Thanks Chris, changed out the coupler on my 22yr old Whirlpool washer.

Excellent video! Clear instructions, nice camera work, and a complete job A-Z. Thanks!

OK, This guy drives and fixes cool cars, once gave amazing automotive career advice to my son, teaches automotive repair and maintenance AND just taught me how to fix my washer. We LOVE this guy!

You just saved me a bunch of money. I found the part for $18, and it took me about fifteen minutes to fix, but it's working like a champ.

LoL, helps me keep the cars going and now my washer to. Best instructor on youtube. Thanks Chris, very helpful.

Just visiting from LTT’s KZfaq charging for 4K video 😛

Can't thank you enough. I know nothing about washing machines, but was able to fix my 19 year old machine. Working like new! It didn't however, take 10 minutes, but was well worth the time and effort.

I LIKE THE FACT THAT YOU GO TO THE SIMPLE REASON FOR NOT SPINNING OUT FIRST INSTEAD OF MOTORS, TRANSMISSIONS AND THE LIKE. SOME OTHER PEOPLE ARE CHECKING MOTORS OR PUMPS ETC. MOST OF THE TIME THE MOTOR COUPLER BREAKS & THE WASHER WILL NOT SPIN, AND IT WILL DO IT FOR THE REASONS YOU SAID. THANK YOU.

Excellent tutorial, much appreciated!! You have every detailed covered and thank you for not having any music or fowl language!!!

Thank you so much for this video!! I fixed it all by myself and saved hundreds! I really like how you went through it step by step and even put a link to the part I needed. Thank you!!!

Ok, I havent repaired my washer yet, BUT, I tilted it back, put my car jack stand underneath and mine looks exactly like yours. I can see the couple is broken, so I'll be ordering a new part. You are the man Chris! Thank you!

I have been watching this channel since before I even had a car. I had no idea you had non-car videos. I got my first apartment that came with a broken washer. Who knew I'd get help from the same person who walked me through my first brake job.

As described! What an excellent and informative tutorial. EVERYTHING was exactly the deal.... right down to vacuuming around the dust around the bottom of the appliance. Thank you so much for bothering to do this. From Manitoba, Canada! :)

Excellent video Chris. Just the information I needed. These old machines are built like tanks - ours has been going for over 34 years! :-)

Thank you, thank you, THANK YOU!!! I couldn’t readily find a repairman; watched your video, bought the piece and changed it myself. My girls and mom were so proud!😊

Thank you , this was the best video I’ve seen to fix this. I am a single mom and your video help me fix my own washer. No man wanted to fix it for me or they wanted to charge me $100 to fix, when the part was only $8 bucks on Amazon. Your easy step video was the truth!!! Thank you! ❤

Instructions unclear, removed the engine from my car.

Thank you for this video ChrisFix! I am going to attempt to fix my washer now! This is the best video EVER!!

Great video Chris! I especially liked that you recorded the sound the washer was making before you replaced the motor coupler. Mine is making EXACTLY the same sound. With your video I am confident of making the repair!

My part cost me 17.75 at the Maytag dealer still a good deal didn't have to wait for the part thanks Chris Fix

Hey Chris - Great quick fix and a step by step to repair the washing machine coupling - always like watching your videos as all the other you tube people will agree .

Nobody: Chrisfix: wanna learn how to fix a washing machine?! Everybody: Hell yeah

Thank you so much, I watched your video, ordered the part, came home from work this morning, and salvaged my dead washing machine in less than a half hour. Greatly appreciate your channel.

Great/perfect instructions. Mine was a tight fit, both ends, so instead of hammering on the cogs with a rubber mallet I found a large socket ( spark plug socket) that fit in the center and tapped on it. Thanks for the close-up photos and you were right only about 10 minuets to do the job. Of course, add another 20 to find the tools, something nice and soft to lay/kneel on and moving the machine!

Wonder if hes ever going to do a chrisfix relationship. Lol

"It's a 2 dollar part!" "It's a 5 minute job!" "Let me show you how to replace it now that we've identified the problem" Great video bro! It's quick and to the point.

Just wanted to thank you! Made my job easier with the car jack method. The coupler is now $18 ... but much cheaper and quicker than calling a mechanic! I also enjoy your other videos for years...Thank you again!

Our washer just quit spinning, and out loud I said “If only ChrisFix made videos on how to fix this.” Guess he’s not just a car guy after all! Thanks man, your videos have really helped me.