How do you clean the seats themselves?

Do you not need to bleed the brake lines?

I made this adjustment on my 2000 Ranger, but I also need to adjust the shift linkage. I can not get to setting "1". Could you do a video showing how to make that adjustment? I suspect that I should have made an adjustment to the shift linkage instead of the indicator.

Someone please tell me when do you change your brake fluid please?

Hi chrisfix, are you from Canada by any chance, would pay you to do this for me.

Me to

07:26 for the answer.

I would add 1500$ in just the price for detail

Before I watched your video I put a can of free on and it might of turned liquid hoe would I fix that

For sure cheated to get sugar in their pump😅

i fucking hate rusted rotors.

W Video.

Two more things don't be shy if something looks or sounds weird speak up check deeper it's your hard earned money if the buyer tries to avoid or start sound aggressive don't buy from him The second thing is don't overthink it if you get f*ed on your first purchase surely you gonna miss somethings we all been there the more experience you get the less you get f*ed

Hi Chris, I love your work. I got my car services and the mechanic left some grease that touched the plastic on the door near the inside window. How do I take off the grease? The spot is definitely matted and at an angle, you can tell that there is some residue there. Please advise.

my 07 f150 4x4 got 24 mpg but we was paying /$4 a gallon of gas back then and on E85 i got about 20 mpg but i was only paying 85 cents a gallon for it and i had my stock tank 32 gallon and a extra 75 gallon tank. so i would be on empty when i hit a place that had e85. now e 85 is close to the same price so i dont know if it would be worth putting a kit on my old truck now.

I did the vacuum but the system does not take the freon

"A scissors"

I have polished mold for over 45 years and trust me when I tell you this, you would of gotten a better result if you would use kerosene compared to water

Never do this.

I’ve replaced the brake pads before, but I’ve never replaced a rotor. This will be something.

My face when looking for o2 sensor replacement advice and I find a chrisfix video on the subject 😁

its like a vape you 100% gotta prime that filter and coils

You have shown the most sensible and safe way to clean the engine bay. Thank you!

Thanks for the helpful video.

Legend has it his still working on it 😅

What do you think of the Hummer h2?. Also great hummer

Chris, you are a standup guy. Always fun to watch. Keep it it up.

28:40 43:30

How many gallons did you end up having to use total?

Hi I’m looking at your video now and the ones you linked 1) the can doesn’t match what’s in your video and 2) says no longer available

The part of my P-trap that connects to the sewer pipe seems to be stuck on tight, even after loosening the nut. I tried hammering the crook with a wrench and it won't budge. I tried blowing a heat gun at it and nothing. Are there different types of P-trap pipes? (I just realized that I'm asking this on a car repair channel.)

LOL! OK. 🤣🤣🤣🤣🤣

I know this video is 5 years old but i just caught up to the drift series.... DAMN I'M JALOUS OF THIS MUSTANG. It is beautiful. I love how stock it remained with just the right amount of parts to make it driftable. This is how I would want my drift car to be. I get why people gut their cars, but damn its ugly. You're drifting in style

I cut 1/8" steel plates and welded them to the bottom of my jack stands. Then I turned them upside down and poured a coating of urethane about 3/16" thick. I used masking tape to create a dam around the edge to hold the urethane in place while it cured. The tracks I go to don't allow jack stands directly on the pavement so this was my solution. The side benefit is that this also makes the stands safe and stable in grass and I don't have two pieces to position under the car (wood and jack stand).

My sheet metal nibbler nibbled about 5 inches. Then it got useless. Seller didn't react. Great.

it didn’t work for me it got even worse what should i do

Just saved me $3k at the Cadillac dealership! 2007 Escalade EXT 🤟🏽

Hello Chris can Ithis battery be use on a nissan leaf 2014?

Hey Chris, thanks a lot party five years going on. I did what you did step-by-step and it’s going on five years and I got still got cold air conditioning I had to reset. I had to redo AC compressor put all new rubber, gaskets and all the parts they need it probably didn’t need it, but I did it anyways to make it last longer, you ain’t gotta do it. Don’t do it but you’re gonna order a whole rubber kit gasket pack off Amazon or Walmart AutoZone auto parts Pep Boys

Asphalt is to soft for jack and working, beton is much better

Chris what tool do I use to remove the seat bolts?

My dad and I changed the clock spring and i noticed this morning that the defrost along with the car logo with the arrow ↩ doesnt turn on and the airbag light is on.... any advice ?

Grease the piston and the interior parts of the caliper to prevent noise. Also pump the brake pedal and add enough brake oil in the Master cylinder.

3 years later, and you are still replying to comments. You are such a good content creator.

W.

Hey man I have a 98 mustang it’s my daily but I also wanna be able to drift in it you got any advice

You a fucking awesome !!!! Thank you !!!!!!!

How about washing microfiber towels? I mean yeah, people keep suggesting that I should use a special microfiber detergent, but these people are usually from detailing companies (or people that buy without doing anything themselves), and I do not care much about their marketing. I believe soapy water and hanging them out to dry should be fine, what about you? What kind of soap for instance? Please correct me if I'm too wrong.

So at this point - is there a place in a car where I CAN use a sponge without scratching anything? I was thinking maybe I could do it with plastic covers of the engine or something else not clear coated, but since I have black paint and alloy wheels, I won't use it there. I also got some chamois leather and I'm wondering whether using it for e. g. drying windows would be alright (I kinda wanna use it, it was a present).

Ford with a burned turbo, emmm, why am I not surprised? Long bill awaits for this poor family. LOL