How to Spray Paint Your Car's Trim

No video

How to Spray Paint Your Car's Trim

Рет қаралды 883,393

Күн бұрын

Spray paint your cars trim using aerosol spray cans. Spray paint your trim so it is dark black. Does your car have faded trim like on my Mazda b3000 Ford Ranger pickup truck? If you watch this video you will learn how to prep your car for spray painting with a typical paint can and learn how to spray properly without using any special equipment. I really like how nice it came out! Comment below and let me know what you think. Also "like" the video if it was helpful!
How to Paint Your Exhaust: • How to Paint your Exhaust
Restore Faded Plastic: • Restore your Faded Pla...
How to Change the Transfer Case Fluid: • How to change Transfer...
How to Change the Rear Differential Fluid • How to change rear Dif...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed...
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: www.youtube.com...
-KZfaq Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Пікірлер: 910

@isuguy82 5 жыл бұрын

Sad Chris Fix. Before he got his Hummer.

@Zxor0 4 жыл бұрын

r largo 🤣🤣

@discofusionsoundco-ordinat2563 3 жыл бұрын

On the 12th second of this video. We finally get to see what Chris fix finally looks like 👍🙌

@Oliver0200 8 жыл бұрын

when you spend hours doing this and your done and proud then you realize you have to do the other side

@chrisfix 8 жыл бұрын

haha but the other side will go a little faster now that you got the process down!

@qtr6157 7 жыл бұрын

ChrisFix À

@fazelego640 7 жыл бұрын

ChrisFix lmao 😂 that's hella true

@noellineleblanc2179 7 жыл бұрын

@bniisantos 7 жыл бұрын

Oliver you're*

@VanWyn7 4 жыл бұрын

It's awesome to see how you became so professional in your videos. I'm not saying this video is bad at all, but now your voice, camera quality, transitions, speech... It's everything so professional and it shows that you've grown a lot without giving up your roots (driveway and common tools). I hope you can still do this for years, as long as you want because you're someone to trust and a really good place to learn while being entertained.

@cameronstarseed7038 2 жыл бұрын

absolutely agree with every word

@Burn_pancakes Жыл бұрын

Fr he been keeping it real.💯

@joshcamarena64 7 жыл бұрын

Dawn and water, the predecessor to his soapy wooder.

@erikfrankfurt4650 5 жыл бұрын

I like the way he says water.

@CapitalWorksPro 5 жыл бұрын

You fool! He gave us the formula!

@FredTheLutinoCocatiel 5 жыл бұрын

@@CapitalWorksPro anyone who calls another a fool is in danger of Hellfire.

@CapitalWorksPro 5 жыл бұрын

@@FredTheLutinoCocatiel you fool! It was merely a joke!

@JayLupe 4 жыл бұрын

Now we just need the secret krabby patty formula!

@chrisfix 10 жыл бұрын

+James Mallia, I used black/gray primer because if the paint gets scratched down to the primer, you wont see the primer easily. If you use red, and you get a scratch, red will show easily against black paint.

@laurennewman3781 7 жыл бұрын

ChrisFix

@laurennewman3781 7 жыл бұрын

ChrisFix

@TheMegacheesey 6 жыл бұрын

ChrisFix please make a video of painting a car on a budget

@matt12239 7 жыл бұрын

FACE REVEAL!!!

@Soniboy84 7 жыл бұрын

0:12

@yomomma6492 7 жыл бұрын

3:17

@danielperry5976 7 жыл бұрын

MattAndHisBike 4:04

@tyresenooney3640 6 жыл бұрын

He did one on a video when he was at the track

@GlitchEmpireBrett 6 жыл бұрын

MattAndHisBike ikr

@chrisfix 11 жыл бұрын

Thanks! I pride myself in keeping my cars in the best shape I can.

@hamphollifield6133 3 жыл бұрын

I have question chris fix I am going to do this on my 2001 ford ranger on the trim and bumper and I was wondering is the paint still look good after 3 years

@chrisfix 10 жыл бұрын

Learn how to fix scratched or curbed wheels in my wheel repair video: kzfaq.info/get/bejne/b72BnNSK0dbcn40.html

@mmmagesh7082 9 жыл бұрын

ChrisFix : wow! great if every one start to do our work then surely we can implement ideas

@larryhostetler3887 9 жыл бұрын

you could have used some tack cloth on this and the headlight video too. they probably have them somewhere around where the paint is in the store.

@Davids-fb9ub 8 жыл бұрын

I need your advice. See I have a 1995 saturn sl1 4 door sedan...your gona have to google it because I have a very small trim size than yours so you can see for yourself. I have the same exact problem you have only a little worse. I have rust on the black door trim itself. I mean you can see very small black paint spots from how it looked back in the day only the majority of the trim is just outline with rust. Looks like a rusted door trim mixed with spots of black paint that held up pretty good in that one spot. What are the steps to get that door trim back the way it was? How much grit sand paper? I need your help. Thanks.

@Aaron-qr3tg 8 жыл бұрын

+Dave S. If it's small and u can't remove it use a small paintbrush

@dantheman331977 8 жыл бұрын

+Dave S. If you have rust, start with a grittier sandpaper like 400, 200 if it's really bad. Then use a primer specifically for rust. If you have the trim like Chris does, I would remove it so you have more area to work with.

@thejudgemeister 7 жыл бұрын

I see a few comments on here criticizing the paint job. The truth is, these videos that he does are for people who don't necessarily have a paint booth, an air compressor, a spray gun and all of the tools that a body shop would have. Why? Because it helps those who don't have these things or the money to make their crappy cars (myself included) look less crappy. If you have better tools you can use, by all means, do a better job and make videos. Why bust this guy's chops for trying to teach someone something new? And yes, I know this video is from 2013. It just irritates the hell out of me when people have nothing better to do with their time than nitpick. I do have one question Chris... Would clear coating help in any way with the durability or look of the finished product?

@chrisfix 7 жыл бұрын

+thejudgemeister thanks man! Clear coat would help with durability but the black paint I used is pretty good without clear coat.m since it's bumper paint. It still looks great!

@MarkH10 6 жыл бұрын

THIS is a homemade paint job, and the steps are correct. The emphasis I gave heard from Chris several times on PREPARATION are spot on, pro tips. This is a driveway job done right, except for the over spray which is compound then clay on paint, and steel wool and clay on glass. Chris makes excellent videos and informed decisions. ( Exept for the door gap. It should be papered from both sides in the gap to control over spray )

@utube7508 3 жыл бұрын

Actually satin black paint would have probably looked better.

@henrik2413 5 жыл бұрын

hey guys chris fix here he said super sad. But in new videos he have much energy and say HEY GUYS!!!! Chris fix here!! and today i gonna show you!

@tombryant52jumpscoach Күн бұрын

You not only show me how to do stuff but watching your videos gives me the CONFIDENCE to keep going and do what I want to do.

@colind5092 7 жыл бұрын

Chris my man your painting skills have come a long way.

@JMCDetailing 7 жыл бұрын

Colin d Ya they have!! I found a video where he shows his face

@Am0556969373mar 7 жыл бұрын

At last its nice to meet you Chris the reflection of your face on the window 🖒

@raterman4624 6 жыл бұрын

i KNOW, I WAS SO EXCITED TO SEE THIS

@ralphvaccaro2638 2 жыл бұрын

Yea shocking

@tenacious10s85 4 жыл бұрын

I just gotta say your videos helped me out tremendously and helped me make quite a bit of money locally I also see your still active in ur comment section years later for older videos great dedication and great work man thank you for the educational videos bro

@chrisfix 4 жыл бұрын

I'm glad the videos are helpful! Thanks a lot!

@Peter-os7nk 4 жыл бұрын

He IS still active to his people! Chris, can you please say "Cheehoo" in your next vid?! You the man!!

@jennifercooper8540 5 жыл бұрын

Thank you sooooo much. I was getting tired of looking at my faded window trims. I am so glad people like you care about helping other people to sacrifice so much of your time to make videos like this. I save so much money because of wonderful people like you. Thanks a billion times over. Ignore the jealous haters. You are greatly appreciated by many other people you have helped.

@rsscarr 7 жыл бұрын

Love the videos man. You do a really good job. There's something you should try when using spray paint to make it come out less streaky and more even. Get a bucket or bowl of really hot water and let your cans sit in it for around 5-10 min. Then when you spray it comes out really fine and more even

@chrisfix 7 жыл бұрын

+rsscarr thanks for the tip!

@joshualaw375 2 жыл бұрын

@@chrisfix Ah, so THIS is where you got that trick! Seen it on a couple more recent videos of yours. Keep it up Chris, love your work!

@superjoint57 8 жыл бұрын

I love how all the "masters" of everything come to comment on these types of videos! Chris is taking his time to share his procedure & help others if they are willing to try! Then we find the worlds best "chemists" gather within the comment section! Go away! Here's an idea...get your ass from in front of the computer go outside and make your "perfect" videos for all the world to see!!! If you are as good as you say you are in your BS comments & ridicules, you would be billionaires within the auto industry! Don't let them bother you Chris...you are doing a GREAT service to a GREAT deal of people!!!

@chrisfix 8 жыл бұрын

Thanks a lot man!

@tcl5853 6 жыл бұрын

D.P.T. Hey, if anyone puts up a video purporting to teach some skill etc then expect to get both positive and negative feedback. If you can take criticism or you are too sensitive to handle comments you don’t like then don’t put yourself out there as an expert. Apparently In your world only those who agree with you are permitted to speak up. Go live in North Korea where that kind of sentiment is highly valued or embrace freedom of speech and stop whining.

@FredTheLutinoCocatiel 5 жыл бұрын

If I add a comment that is constructive due to my 51 years of experience and I took a Auto Body class I do learn from the Chris fixes mechanical expertise to do my own repairs I have done them all my life on my own vehicle and others usually for free sometimes I let them borrow my tools and instruct them on how to do it themselves.

@chrisfix 11 жыл бұрын

Clear-coat does come in a spray can. As for your whaler, it is probably not a clear coat. Most boats are fiberglass with a gel-coat finish. I dont know how bad the finish is, but most of the time a buffer, some polish, some wax, and a lot of elbow grease can get that hull looking like new. I love whalers, such great boats!

@ncooty 4 жыл бұрын

I'm pretty sure that kid back then had no idea what his channel would become. It's neat to watch these old videos with his future trajectory in mind... and to hope that we might each have similar happy surprises in store for us. :)

@johnday7362 5 жыл бұрын

Chris, you should consider wet-sanding the finish paint with 2000 girt sandpaper and then after through cleaning put a mat clear-coat on it. Don't forget to wet-sand the clear coat! Paint looks good!

@chrisfix 11 жыл бұрын

Thanks man! I try to keep her in good shape. You should have seen the truck when I first purchased her. She was rough!

@quentins5692 7 жыл бұрын

Man these old videos had a lot less energy lol. Still love the channel my man.

@jusontask 3 жыл бұрын

haha right, i love it still

@asdfghjkl09824 10 ай бұрын

I've been watching CHRIS FIX now for years now and all the videos I've seen have helped me significantly in my own car repairs

@Earth29431 Жыл бұрын

Wow I'm watching one of the very first Chris automotive tutorial from 9 years ago.

@mb1636 7 жыл бұрын

my truck do not have this issue but i watch the whole segment. im a chrisfix addict follower!!!

@chrisfix 7 жыл бұрын

Thanks for the support!

@cesarm.gonzalez2663 7 жыл бұрын

Mel B. Same!! haha..

@dumpynut3741 5 жыл бұрын

I don't even have a car...

@chrisfix 10 жыл бұрын

I bet it is a bearing... I have a video on how to replace that. Just search youtube for "How to Change a Wheel Bearing (long and detailed version)". I also have a shorter version. The beginning of the video has what it sounds like when it is bad. Let me know if this helps.

@RIKLASVEGAS 4 жыл бұрын

You are the first person to actually get me to watch paint dry. Great video Chris 😊

@dukelorenzmorales2601 5 жыл бұрын

This is one of the rare videos where we actually see Chris' face :)

@doodlebopdrummer 6 жыл бұрын

Hey Chris, Now that it's been 4 years, how's this paint holding up on the b3000? Great video. Thanks!

@beans4269 2 жыл бұрын

Hey Nicholas, Now that it's been another 4 years. 👋 hi

@BeckiASMR_19 2 жыл бұрын

@@beans4269 hahahahahahahaha

@Regellion Жыл бұрын

@ROMAN Hey ROMAN, Now it has been ANOTHER 4 months. Hi!!

@chrisfix 11 жыл бұрын

Might want to add a clear coat over it... Or use bed liner spray paint.

@guerrag0411 Жыл бұрын

man, you came a long way, you make people even you don't know in person... proud of you.! you help us a lot, with so much dishonesty around automotive repair world, thnks man.

@MarkH10 6 жыл бұрын

In the door gap, ad paper taped the full length inside the door, and on the other side too, inside the door jamb. That controls over spray into the truck. The over spray on paint is rubbed with compound, then barred with clay bar. Overspray onto glass gays steel wool, then clay bar. Overall this is excellent for anyone not able to use "good", "professional" equipment.

@olahedlund5454 7 жыл бұрын

Getting tired Chris? :)Now its like "..hey guys..", liked the "HEY GUYS!!" much better, got me inspired! keep up the good work, im Learning!!

@sportchamp4eva11 7 жыл бұрын

Ola Hedlund getting tired?! This is three or four years old lol

@raterman4624 6 жыл бұрын

its quite the opposite. it used to be "Hey guys..." now its "HEY GUYS ITS CHRIS FIX *Eye Twitch*"

@sarapotatonight9234 7 жыл бұрын

honestly. I'm not that interested in the things Chris makes videos about. His voice and the way he makes the videos is just somehow satisfying xD o.o

@chrisfix 7 жыл бұрын

+Sara Potatonight thanks!

@sarapotatonight9234 7 жыл бұрын

but of course no offence! the videos are really well made and I do love cars and wish to be able to fix my own cars in the future 😁

@amber111594 5 жыл бұрын

Man what a huge difference between your videos now and your videos then. It's night and day

@polish2x91 8 жыл бұрын

I like how you make the videos about the process instead of "you'. Some of these other channels focus too much on the individual as the brand. I think that's why "Food Wishes" is so successful too.

@chrisfix 8 жыл бұрын

+polish2x91 thanks!!! I'm glad you enjoy the videos!!!

@darwinescobar7629 5 жыл бұрын

Chris just so you know, I don't like your videos, I LOVE THEM. you should be proud of quality work and knowledge at what you do, I've learned a lot from you, that I feel like I know what I am doing sometimes, of course is the confidence you give us. I really thank you and please don't stop making videos for us

@chrisfix 5 жыл бұрын

Thanks a lot!!!

@BrandonTLuong 5 жыл бұрын

You should make a digitally remastered version of this 🤙🏽

@loganatorexit 5 жыл бұрын

I'd second it

@NewHaven203 3 жыл бұрын

Third that

@robmorrill5104 5 жыл бұрын

What I like about your tutorials is that you don't harp on the faults of the car manufacturers, It is what it is. I assume you have some sponsorship from Ford so that's cool. Sometimes you use the term "poor design" but don't harp on it. Love your vids and have used the tips on my beater car.

@FrankTheTank1996 4 жыл бұрын

I just got a project truck after watching a ton of your videos....looking forward to learning more as I keep watching your videos. Yes, I'll be painting my car, as well.

@chrisfix 10 жыл бұрын

Thanks man! What do you mean "changing front weel drive"?

@nilanthaabeyrathne6109 5 жыл бұрын

Can you do a video on how to spray paint your bumper?

@oshkoshbegone 5 жыл бұрын

Nilantha Abeyrathne yeah you do the same thing

@erikfrankfurt4650 5 жыл бұрын

@@oshkoshbegone Not at all, sir/ma'am/zhim/zher/rapaport. You simply remove the bumper and pour a gallon of Behr exterior high gloss over it and then vigorously spin around in circles on the front lawn.

@oshkoshbegone 5 жыл бұрын

Erik Frankfurt I actually don’t identify as a pronoun. I don’t actually identify at all. I just exist. I am deeply offended you assumed I identify at all!!

@chrisfix 10 жыл бұрын

Gotcha, yea the front is a pain. I am still working on that. Gotta figure out the best way to do it

@ramanhb1 6 жыл бұрын

wow this is the oldest of chris fix i have watched yet. its cool to see where his videos were at and now the quality they are.

@ClickClack_Bam 9 жыл бұрын

Maybe it's just the video but I can see heavier lines of paint where you painted. To me it looks like maybe you didn't have a wide enough nozzle or painted at an incorrect distance. I can see the uneven areas of paint instead of a smooth clean paint coat.

@chrisfix 9 жыл бұрын

***** It is just the video. The paint looks smooth and consistent in person. Maybe it is the angle of the light while the paint was drying? The paint was not completely dry (just to the touch) in this video. After a few days, it blended perfectly.

@aaroneaton7412 7 жыл бұрын

you sound depressed in this video

@bluetorch13 7 жыл бұрын

yeah! the video started with a different voice. More like tired.

@pufix_3331 5 жыл бұрын

Everyone was depressed in 2014

@JM-fo1te 5 жыл бұрын

Guess he learned to raise his voice and enthusiasm to reduce bounce rate.

@muzzaball 4 жыл бұрын

I think this was part of his progression as a content supplier. He now always starts with his 'Hey Guys - Chris Fix here!' but this was before that. It has now become his trade mark - even has Merch with it lol. He makes great content tho.

@jackofspades5950 4 жыл бұрын

i think he might of been sick

@cjmiddleton7906 3 ай бұрын

Woahhhh been watching you for yearsssss but I found your face for the first time

@truyentruong9015 3 ай бұрын

Came a long way from this to the Chris Fix we see now. Great Job, Chris!!

@lucabaldassi6024 5 жыл бұрын

You could say it is Back in Black

@nicolebarnett8702 4 жыл бұрын

Now we're going to get our alcohol *screams from cut on hand...that's me

@neilmilburn5149 8 жыл бұрын

I followed this to spruce up the very tired looking wheel arches on my Defender 90 and it worked a treat. Thank you.

@chrisfix 8 жыл бұрын

Awesome!!!

@devenp2069 5 жыл бұрын

You make it easy. Always learn alot and gain confidence watching each of your videos. Keep up the great work!

@jrg_lmnop 8 жыл бұрын

What about the heat gun trick you did on the wheel well trims? That didn't work for the door trims?

@chrisfix 8 жыл бұрын

The door trim is a different material (not plastic).

@SlapshotLover 4 жыл бұрын

I saw your face in the window reflection

@0seck 8 жыл бұрын

your neighborhood is so quiet it makes me miss spring and summer, and btw i was your third subscriber on youtube.

@jackcarroll702 8 жыл бұрын

It's spring

@0seck 8 жыл бұрын

it is now lol it was snowing when i commented that

@chrisfix 8 жыл бұрын

No way! That is awesome you were my 3rd subscriber! Thanks for the support!!!

@zn_361 4 жыл бұрын

wow Chris, you've come a long way, congratulations on the success. and thanks for the great video to help me restore my trim

@klurre5082 7 жыл бұрын

why didnt you use clear coat?

@brimendis 5 жыл бұрын

Also wondering about this

@g88a 8 жыл бұрын

5:33 his face

@TheWicklunds25 6 жыл бұрын

I think the fact that you did the work yourself and took your time and made sure you did everything that you could in preparation made you happy with the results. Truth is, you don't really get the factory look when you use store-bought spray cans. For the work that you did it turned out good but if I'm being critical as if I did the work, I'd say it still has some orange-peel type finish which is not what you want on any of your car paint surfaces.

@RasSosa 3 жыл бұрын

You have transcended so much, you do not even sound like this on your more recent vids!!! Awesome!!!

@chile_the2jz618 7 жыл бұрын

3:25 that's what she said crisfix 😂😂

@lesterevio 6 жыл бұрын

"Very wet in between" Hmmm...

@jonathonmason6394 4 жыл бұрын

Somebody's got a dirty mind. 🤣

@LesskoBrandon 5 жыл бұрын

Definitely come a long way in his videos

@JanDootjes 8 жыл бұрын

Again, such a interesting vid. When I spray paint items, no matter what, I also spay in couple of thin layers. But the final layer I sprayed slightly thicker than the layers I put on before, on this way the paint will smooth out nicely and you'll get a fine flat surface. So for example: 1 or 2 thin layers of paint. After it is dry, put the finishing coat. This coat will fill up the 'orangepeel-look' you'd made with the first 1/2. Think I will make a vid of it by myself in the near future how I'd like to do it. Ok Chris thans for the vid's, and can't wait to see you're upcomming. All the best amigo.

@chrisfix 8 жыл бұрын

+Jan Dootjes Thanks Jan and thanks for the tips!

@austinherrington2251 8 жыл бұрын

hey goof off works magic

@chrisfix 8 жыл бұрын

Good idea! Thanks for the tip!

@orarinnbirgisson7457 8 жыл бұрын

How is the paint holding up today?

@sportchamp4eva11 7 жыл бұрын

Þórarinn Birgisson true! Post it up! Or just check his truck videos more recently I guess.

@abidhajher7076 Жыл бұрын

Ive been watching Chris for ages, first time Ive ever seen his face

@reedrancho 7 жыл бұрын

Nice video, shows a well thought out plan to update the faded accent panels to a better look. The best part is it is a great "shade tree"/ driveway fix, saving a lot of money for the owner and using materials easily obtained. It doesn't have to be concours d'elegance quality it just has to do the job needed for the time and money spent. 👍👍👍

@ajhariri8211 9 жыл бұрын

ChrisFix do you wanna borrow my car for a month so you can do stuff to it? lol

@chrisfix 9 жыл бұрын

Abdul Hariri Hahaha

@JordyValentine 8 жыл бұрын

Oh God, acetone? Use a clay bar, no need to use harsh chemicals on your paint

@chrisfix 8 жыл бұрын

Thanks for sharing

@dantheman331977 8 жыл бұрын

+TacticalBBQSauce I used a white rubber eraser once that worked quite well with some elbow grease.

@brendantucker2781 8 жыл бұрын

any polish or rubbing compound will also do the job.

@MarkH10 6 жыл бұрын

This is the subject I was looking for............ The answer us just as relevant to the masking tape adhesive. Use NO CHEMICALS on the paint. Clay bar is made exactly for over spray. Rubbing compound also takes it off well. I thought of your approach in this context. We painted a Porsche Panamera fender. The over spray was amazing, about the size of a basketball. There is absolutely no way you will ever get that much over spray off correctly with acetone or another chemical and not ruin the paint in some manner. Then you only have to respray a 60 day old, $150,000 Porsche. Good luck. Clay bar saved us from botching up a $5000 fender paint job. Clay and compound is all we used.

@ronniepirtlejr2606 6 жыл бұрын

Seriously? Acetone works greatď

@stephenirwin2761 5 жыл бұрын

Terrific! My old Sonata needs that!

@jfk64kennedy95 7 жыл бұрын

Acetone is better then Alcohol, it removes all contaminants, and it's evaporation rate much faster and leaves no residue, and should ALWAYS use a block when sanding if can, the minute pressure of your individual fingers will leave different sanding material removal patterns where your fingers had more pressure. edit, ps, thank you, have a 2001 Mazda B 3000, essentially a Ford Ranger and the black on my truck shot too, lol in same places. so ty for the video, will definatelt use the Rust Oleum product

@michaelhinchey 8 жыл бұрын

Back to black is only good for non painted plastic.

@sting2689 6 жыл бұрын

It’s not a permanent fix though

@anoopthawait9671 7 жыл бұрын

0:51 face reveal !!

@ian1414145 6 жыл бұрын

Anoop Thawait omg, thank you!!! It doesnt match the voice though

@Sundaydrumday 5 жыл бұрын

I enjoy how u live very well but not excessive....your not out here living and blowing your money. You sir are all around smart. U have common sense beyond most as well as a genius IQ. Very humble. You deserve everything you get. Hard worker. I learn so much from you...thank you. One day i hope u branch off into other d.i.y. areas such as home improvement and other things

@obyone127 10 жыл бұрын

FYI, blue painters tape works better for getting that sharp edge. Another tip is, if you're afraid of screwing things up, you can paint with Plasti-Dip. Since it's a rubber coating, there's no need to mask off the glass as it will simply rub off. And if you don't like how it came out, it can also be completely peeled off as long as you apply enough coats.

@chrisfix 10 жыл бұрын

Thanks for the tips! This is blue painters tape, except it is white not blue lol. Plasti-dip is definitely an option if you are unsure. Problem is, it isnt permanent so if you go offroad and a branch scrapes the paint, with plastidip it comes off.

@liampersse9501 9 жыл бұрын

Wow, Chris you're the best. I'm just a teenager and do work on my dad's car for him. You make the hardest jobs easy and fun! Thx for all your help. Check out my channel!

@chrisfix 9 жыл бұрын

Liam Persse Thanks a lot man! I am glad you like my videos and they are helpful!

@liampersse9501 9 жыл бұрын

ChrisFix now I know why you got the name Chris fix!

@MrMcMuffinJr1999 6 жыл бұрын

Okay..... So you do have a face

@Zampan0 7 жыл бұрын

This is the best video that I've seen, better than the "Rustoleum" videos. Thank you.

@TheOutdoorCanadian 11 жыл бұрын

I love how you treat your truck so well

@salkuwaiti66 8 жыл бұрын

Please use painters tape next time

@chrisfix 8 жыл бұрын

+Saif Alkuwaiti thanks for the tip!

@MattHannah88 5 жыл бұрын

3m tape that he used is actually what's used in the auto industry. Painters tape is intended for home latex paints as it is less sticky and won't pull off the latex paint it's stick too.

@JohnathanRavan 7 жыл бұрын

You sound depressed in your intro, I'm here if you need to talk

@Jonathan.R.Pereira 6 жыл бұрын

Johnathan Ravan This is 3 years ago, I guess when he started initially. Over the years he's worked on presentation.

@snitz157 7 жыл бұрын

chris, i just wanted to let you know that if you have a 2 pack paintjob on your car, the paint is solvent resistant, so no matter what you put on the paint it should not effect it, if the car has been repaired by a body shop and you were on a budget, they may have used acrylic paint which is not resistant to fuel and is not as strong as 2 pack paints, also 2 pack means there's a paint and a hardener so it's chemically hardened which is why most car brands use it, so if you use nail polish remover to get rid of overspray on an oem finish there shouldn't be any problems. one more thing about 2 pack paints is that if your car was made before 1990 it Will have acrylic paint as 2 pack paints weren't used until the 90's.

@comedianmusicianman 9 жыл бұрын

I don't know if you said it or if anyone else has, but if you have some overspray left on the paint, a claybar is very useful in taking it off.

@chrisfix 9 жыл бұрын

+G-Man Thanks for the tip!

@NoNo-tr1cj 7 жыл бұрын

Do a face review

@aaronschofield7817 7 жыл бұрын

That would be kind of weird.

@RoadKen53 8 жыл бұрын

Paint looked very uneven, dull and glossy areas. You need to put a good wet coat on last coat.

@chrisfix 8 жыл бұрын

Thanks for the tip! It evens out once it drys completely. That is the type of paint this is.

@TheOutdoorGamer1 7 жыл бұрын

Ken Doe Mr. Valspar just got rekt.

@RoadKen53 7 жыл бұрын

Chris, even after you put the trim back on it should have been somewhat completely dry and it still looked uneven.

@RoadKen53 7 жыл бұрын

I started doing custom automotive painting back in the mid '70's painting custom vans in Anaheim and we did 3 vans a day and after one of our painters moved to our new facility in the Bay area I cleared coated the 3 vans and had to keep it wet without running it and in 10 months never had a run in the clear and one morning there it was, my first run and made the mistake of wet sanding it and buffing it out and after that we had to wet sand anything that left the shop because of the mirror finish it left.I've done trim in a textured finish that looks awesome when done evenly and I set the texture standards back in the '80's in the computer industry at KeyTronics Corp in Spokane and have done a lot of custom motorcycle painting in So Cal and still like to grab one of my old Devilbiss spray guns just to keep up on the new coatings out. I even had a paint shop in the Northwest where I did Military Spec painting for the Defense Department so I know a little bit about paint and applications of it.Mr. Valspar here didn't get 'rekt' I just pointed out that the finish was less than perfect.

@bentnickel7487 6 жыл бұрын

I was going to try and be funny, but you help too many people with expensive problems and I for one appreciate what you do, so no jokes this time around. Thank you, instead.

@Maverick7r 5 жыл бұрын

I used to have the Ford version of this truck with the "Edge" package on it and a painted to match camper shell. I really do miss that truck... It was a lot of fun. :)

@johnsonandson7772 7 жыл бұрын

Lemon pledge works better than most renewal sprays like back to black.. Still temporary and yeah painting it is the true and final fix for beautifying your trim. Good work bro 👍

@DJTAZ1996 5 жыл бұрын

AHHAA!! I see what chris looks like xD saw him in reflection of window and he actually stepped in front of camera for first time. Great vid Chris I love watching and learning

@Hymnalysis 5 жыл бұрын

I used this information to re-do the fender flares on my Nissan Pickup. I had them off already, so I just went with painting right off the bat. Thank you for the Bumper Paint recommendation.

@jacklee1094 6 жыл бұрын

Chris, I am watching your old video. Compare to the future and the past, you doing great. Hope you can see this.

@thepassionofthegoose5472 2 жыл бұрын

Masterclass in trim painting.

@aceab2957 7 жыл бұрын

Chris you know I'm a kid but still I watch your videos they are satisfing

@David-pn5qj 6 жыл бұрын

I dont even have my own car and or my license and i love watching your vids!

@azashukri5322 9 жыл бұрын

Hey, this was an excellent video. I love how you took the time to make sure you cover everything you are doing. Thanks man.

@chrisfix 9 жыл бұрын

Aza Shukri Thanks a lot!

@stevegaines1 5 жыл бұрын

NEVER use acetone/nail polish remover to remove overspray. It will eat up you vehicle's finish. The paint used was oil based, so paint thinner is your best bet. You can also use that in place of rubbing alcohol to clean your surfaces prior to paint. I LOVE your videos man.

@DDEENY 8 жыл бұрын

I never learned until recently that wet-dry sandpaper is intended to be soaked in water for 24 hours prior to use for wet-sanding because the paper is made to absorb water like a sponge and assist in the wet-sanding process. You may also care to use polishing compound to remove the light paint overspray. As you said, acetone is definitely too strong and will remove the finish. Even Goof Off is a bit too strong for the purpose of cleaning off paint oversprayed onto body paint.

@chrisfix 8 жыл бұрын

+DDEENY Thanks for sharing!

@bazilwreckerloughead 9 жыл бұрын

Thanks Chris, I want to re-paint the black (trim paint) on two of my cars, but I was unshure about how to go about it. Thank you for showing how to do it step by step, I think I dare to attempt it myself now!

@chrisfix 9 жыл бұрын

Wrecker '56 It was a lot of fun! Take your time in the prep. It is all about the prep! Take some before and after shots too!

@nicholasvadasz2114 3 жыл бұрын

Thought I was the only one to use the razor knife trick on mask jobs. Perfect every time. Rattle can paint jobs work well with no orange peel if you first lay a light tac coat, then a heavier wet coat. More even shine and less orange peel. Easy to do in sun light.