Building a mid 6 second PRO STREET BIKE in LESS THAN 10 DAYS- CAN WE DO IT??? MOORE MAFIA

Рет қаралды 24,458

4 жыл бұрын

Please cross your fingers TIGHT for us as we go through this major project that MUST be done in less than 10 days. Our GSXR 1000 and Hayabusa both have to make our first points race this coming week.
Get Carbon Fiber Bodywork like ours:
www.MontgomeryMotorsports.net
Get your ECU Flashed by me:
www.MooreMafia.com or call me 864-244-5447
Moore Mafia Drag Racing School and Merch
www.MooreMafia.com
See some of the performance products we have at:
brocksperformance.com?aff=3
ENTER DISCOUNT CODE MooreMafia5 for a Special Discount!!!!!
To have us make your bike go fast like ours. Just call me
864-244-5447 Tuesday-Saturday 9am-6pm EST
Follow us on Instagram @chrismooremafia
@bigkountrymooremafia
@ruby_mooremafia

Пікірлер: 89

@Wildcatchigga11 4 жыл бұрын

Your hard work will shine with flying colours in the drag strip fingers🤞

@MrCarnutbill67 4 жыл бұрын

Never seen you channel before but I like it so far. I just had to comment on how nice it is to see shops expanding. Expanding usually means good business practices and good work. So many shops out there rip people off and never deliver what was promised. It gives every shop owner a bad name. I’ve always said that if you simply do what you say when you say, you’ll have more work than you can handle.

@cheskys.5910 4 жыл бұрын

The style of your videos are: 1) Tell the audience what will be done 3) Show the audience the results of what was done. You're missing step 2) Show the audience you doing the work. It doesn't take much to do step #2, you can set up a time lapse with maybe three interventions updating the audience and it will make the videos 1000x more interesting. Looking forward to more great content Chris, thank you!!

@TeamMooreMafia 4 жыл бұрын

Got it!

@ekulfitz99 4 жыл бұрын

Good luck! Youse will get it done for sure!!

@rickylum709 4 жыл бұрын

Hi chris from bluffton sc we Wish you the best I will stop by your shop soon to buy my next bike Keep working hard in those monsters bike 👍

@10njbytes40 4 жыл бұрын

Go get 'em Chris. Builds look great. Always crunch time at the end. Motivation - every pass you make in a competition environment further keeps a razor sharp edge on your skills. One day, if 'lil Rickey decides to stop admiring his trophies of yesteryear and actually race you will stomp him into the ground on the tree alone. Moore Mafia is my #1 must view bike channel now. Your killing it.

@TeamMooreMafia 4 жыл бұрын

Thank you!

@theozman38 4 жыл бұрын

Mr. gadsen has the glory.

@coreyjohnson1756 4 жыл бұрын

You can make it happen sir! Can't wait see to the zx14 put down some #'s!

@ryanblanchfield4804 4 жыл бұрын

More mafia family workin together very nice.

@wernersmall7602 4 жыл бұрын

You will make it finger's crossed🤞 good luck keep up the good work

@alfonsobacon96 4 жыл бұрын

You'll get it done 👍 you got a great crew

@brianfelton5057 4 жыл бұрын

Man that blue gsxr1000r at the 2:50 mark is sexy!!! Ha, thanks man she runs good.

@stevemurtz3546 4 жыл бұрын

Mrs Moore must be the most understanding women in the world!!! I work two or three late nights and my miss is like boy your ass is staying home tonight!!!!

@TeamMooreMafia 4 жыл бұрын

She's a keeper. Lol

@3008josh 4 жыл бұрын

Y’all got it bud hard work pays off you got a great team

@brandoloudly9457 4 жыл бұрын

Good luck buddy. Keep killin it

@kenjinie7016 4 жыл бұрын

You guys can do it !!! 💪🏽🔥🔥🔥

@weRRidezz 4 жыл бұрын

You and your team will make it happen...Good luck....

@BlackPhoenix988 4 жыл бұрын

Getr done! Awesome!

@roderickhouston1435 4 жыл бұрын

Good luck to you and your team...

@christianprieto6659 4 жыл бұрын

Chris’s y’all good you will make it, I’m hoping you guys will go low 6’s with that set up.

@maxsound1000 4 жыл бұрын

BEST MOTORBIKE CHANNEL

@AirwolfBMG 4 жыл бұрын

🙏💪💪you’ll make it, lots of work to do though team, Stay offffffffffff the red bull, the dooooooooooooowns are way to low, and last a long time, don’t need that while your in prestage. IMHO👍🇬🇧

@blessedvetoutdoors 4 жыл бұрын

I know you guys can pull it off fam; we are talking about Moore Mafia. 👊🤟

@theozman38 4 жыл бұрын

I didn’t know you had a mrs moore. Damn. Anyway. It’s a first quarter exam and ya gotta crunch and jam !! Be straight n fast guys

@djwilliams9842 4 жыл бұрын

Yeah y'all got it in the bag.

@smvsounds 4 жыл бұрын

Yes you guys will finish!

@petenet58 4 жыл бұрын

Hey Chris I watch all ur vids n like em all...wen will u race Ricky Gadson I'm looking forward to tht one....my son was a bike enthusiastist b 4 I lost him to one...watch n ur videos help me remember him he used to build bike too

@soumynonareverse7807 4 жыл бұрын

Great bike and great expand. What modification did you do that are probably legal in every country?

@ryanblanchfield4804 4 жыл бұрын

Love you guys.

@michaelbarker853 4 жыл бұрын

See you Thursday. U got it bud

@DiegoAstorga 4 жыл бұрын

Hey Chris, where do I buy the carbon plates that BK uses for building mounts and brackets? 4:27 Thanks. Keep up the good work.

@daveyt4802 4 жыл бұрын

Today is Monday June 15th. Waiting for some 1/4 mile racing!

@TeamMooreMafia 4 жыл бұрын

Coming up this weekend!

@romesyoutubechannel5356 4 жыл бұрын

You got this

@redrocketracing7295 4 жыл бұрын

I’ll be there to run the new super stock class. Gonna get my butt handed to me but you only learn by racing with the best. Will you guys have some SWAG for sale at the track? Might come by and get a sticker and stuff

@maxsound1000 4 жыл бұрын

this is what i want to see more

@laltluangkimatluanga1763 4 жыл бұрын

I'm so excited of rickygadson being SmackDown come-on m mafia Suzuki are the best 👍👍👍👍👍👍👊👊👊👊👊👌👌

@oooti4621 4 жыл бұрын

Where do you guys get your carbon fiber fairings or do you make them

@kennethford5386 4 жыл бұрын

Get it done Chris! Quit yapping and wire up the bike. :) We will be watching from Malaysia.

@solarboygary 4 жыл бұрын

@mooremafia I really would love for you to tune my bike!! I have a 2008 cbr1000 just wondering if you have any good software for the ecu. I live in Colorado and your about 1200 miles away from me, if you have any good advice on what I should do. I’d love to jump on it very quick.

@willonazxten4892 4 жыл бұрын

Can you flash a 2009 zx6r???? Couldn't tell from your website?????????

@thereal_FASTA 4 жыл бұрын

So I take it as the additive has zinc?

@PedroPerez-uc9kb 4 жыл бұрын

I have an 09 r1 crossplane engine i put stator rectifier sarter motor starter relay plugs coils everything u could think off ........ its narrowed back down to battery everyone keeps saying a 280 crank battery..........i want to go with yausa battery wich is the battery that comes stock when bike is brand new .....what u recommend lithium or yuasa......im currently having problems with a feather weight lithium 190 cc

@darrenruffin6002 4 жыл бұрын

Are you going to the one in Maryland

@TEAMWRIGHTEOUS 4 жыл бұрын

We was all wondering why y'all didn't make it to Huntsville this weekend... Now we see why. Y'all will definitely get this thing knocked out by tomorrow night.

@TeamMooreMafia 4 жыл бұрын

We wanted to come for sure

@shaynekielmann 4 жыл бұрын

Gets done all the time !

@shaynekielmann 4 жыл бұрын

Thanks brohther

@devondrickakins 4 жыл бұрын

How much would you charge to build gen 2 hayabusa 1441 kit

@utp216 4 жыл бұрын

Where can I source those wiring harness connectors? I need a few different pin count sets for a project bike.

@TeamMooreMafia 4 жыл бұрын

PRO WIRE

@goodtimeson2wheels 4 жыл бұрын

I'm ready to see this bike go down the track.

@Teglove 4 жыл бұрын

What turbo manifold?

@cocosloan3748 4 жыл бұрын

WWAAAZZZAAAPPPP!!!!!!

@natesmith4405 4 жыл бұрын

should make videos of working on the bikes not just talking about them. time laps and stuff would be pretty cool to watch.

@kenho3jok3r 4 жыл бұрын

I agree. So much talking was annoying me..

@Show_Time317 4 жыл бұрын

He can’t show you EVERYTHING that he’s doing my goodness.....it’s a competitive sport it wouldn’t be competitive if he’s showing you each and everything smh Nobody is never satisfied.....Sounds like you should make your own videos of the full process of building a 6 second bike

@natesmith4405 4 жыл бұрын

@@Show_Time317 no duhhhhhhh all the talk is boring Was the point. Why have a youtube channel if your not going to show stuff............ you ppl crack me up freaking fan boys

@peytonhibdon7659 4 жыл бұрын

Curious as to who did up the seat in the 14R? I could definitely use something like that. Thrashing is always a blast.

@TeamMooreMafia 4 жыл бұрын

HTP

@ravenwood1135 4 жыл бұрын

Hello Chris

@225Racing 4 жыл бұрын

Shoot I run less than 0 with the petron on the street. Changed every 3k miles and about to hit 30k on it.

@rjyoung6651 4 жыл бұрын

Seen some turbo bikes this week at kog Huntsville that shit almost unfair 🤣

@TeamMooreMafia 4 жыл бұрын

They sell turbo parts to everyone. I don't understand why more people don't switch over. Yes the initial build cost more but they are faster and don't break as much.

@rjyoung6651 4 жыл бұрын

Moore Mafia everybody should really but one thing when they tracked got cooler they started spinning and breaking up past like the 330 for some reason

@joshuadavis862 4 жыл бұрын

What happened to rickey v moore.

@douglas_martins 4 жыл бұрын

What is the ECU that your guys are using for the engine?

@TeamMooreMafia 4 жыл бұрын

Maxx ECU

@limited1397 4 жыл бұрын

Probably be running the next pro street race 😂 . Not looking like you're going to make it man.

@jonty4664 4 жыл бұрын

🤞🏻🔧

@odissefsgrammatikopoulos8118 3 жыл бұрын

10 days to building Pro Street Bike,looks like ´´fast production line´´.

@MichaelSmith-ms2mi 4 жыл бұрын

When are you & Ricky racing?

@johnfryman4428 4 жыл бұрын

Always enjoy seeing the wall of porn in the background. - that's some old school sheez for sure.

@elmarredan3283 4 жыл бұрын

Whats up with thr new videos?

@jamarcusgaines1386 3 жыл бұрын

Putting in work. Go big or go home

@laltluangkimatluanga1763 4 жыл бұрын

For Rickey he will not be able to bit you with his h2r he he for Ninja 1000no chance from that old man..... Moor mafia all day long

@pepdizzil 4 жыл бұрын

Im disabled and need help! Cause of my knee surgery cant bend my knee to shift gears , is there a way to make mods to foot peddle and shifter so i can ride ????

@TeamMooreMafia 4 жыл бұрын

What do you have and where do you live?

@pepdizzil 4 жыл бұрын

I live in fla and i have a 2008 r6

@pepdizzil 4 жыл бұрын

I can't bend my knee enough to shift , foot peg needs to go down and forward

@pepdizzil 4 жыл бұрын

Hate to have to sell bike :(