Cooler Master TD500 Mesh V2 Build

Cooler Master TD500 Mesh V2 Build - Step by Step Guide

Рет қаралды 54,931

Күн бұрын

A full step by step guide to building a PC in the Cooler Master TD500 Mesh V2 PC case. This guide assumes no previous knowledge and is perfect for a first time PC builder. Links to parts used in the build are below.
00:00 The Parts
01:28 Preparing the Case
07:49 CPU Installation
08:34 M.2 SSD Installation
09:15 RAM Installation
09:41 Motherboard Installation
10:10 Case Cable Installation
12:24 Power Supply Installation
15:55 CPU Cooler Installation
22:07 Case Fan Installation
23:45 Graphics Card Installation
25:22 Cable Management
25:57 Complete Build Footage
26:58 Outro
Parts used in the build (Amazon links are Affiliates Links)
• Cooler Master TD500 Mesh V2
UK - amzn.to/3IOGd34
US - COMING SOON
CA - COMING SOON
• ASRock X670E Taichi Carrara
UK - amzn.to/3VcfQbJ
US - amzn.to/3RLSre3
CA - www.newegg.ca/asrock-x670e-ta...
• AMD Ryzen 9 7900X
UK - amzn.to/3UXwMm3
US - amzn.to/3e4kB6w
CA - amzn.to/3SPml23
• Cooler Master MasterLiquid PL360 Flux White Edition
UK - amzn.to/3Ez6NL5
US - amzn.to/3m5QiA4
CA - amzn.to/3KC9IXh
• Kingston Fury Beast RGB 32GB 5600MT/s DDR5 CL40 DIMM Desktop Memory (Kit of 2)
UK - amzn.to/3R4dk5g
US - amzn.to/3RapvO6
CA - amzn.to/3bOCyVb
• ADATA Legend 960 1TB
UK - amzn.to/3UpzbEM
US - amzn.to/3VMWae4
CA - amzn.to/3XTiUuI
• Cooler Master XG 750 Platinum Plus Power Supply
UK - amzn.to/3oEA4vW
US - amzn.to/3dhE1Va
CA - amzn.to/3RW8iru
• ASUS TUF Gaming GeForce RTX 4070 Ti
UK - amzn.to/3ZN0vjY
US - amzn.to/3XGtHHv
CA - amzn.to/3Y0CDrJ
• Cooler Master SickleFlow 120 ARGB White Edition - Single Pack
UK - amzn.to/3qM9gdT
US - amzn.to/3qKrSLd
CA - amzn.to/3eRwsoh
• CableMod Pro ModMesh 12VHPWR Cable Extension Kit
UK - eustore.cablemod.com/product/...
US - store.cablemod.com/product/ca...
CA - store.cablemod.com/product/ca...
• Cooler Master MasterAccessory GEM - White
UK - amzn.to/3lVcjkJ
US - amzn.to/3Ex36pn
CA - amzn.to/3YYwzkj
• Noctua NA-SEC1, 4-Pin Extension Cables (30cm, Black)
UK - amzn.to/3ZizmEu
US - amzn.to/3YUQHUd
CA - amzn.to/3kvQibQ
• Maidesite Standing Desk S2 Pro Plus - shrsl.com/3wwme
Affiliate links
I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
More photographs of the build can be seen at pcpartpicker.com/b/tWBcCJ and a time-lapse of the build can be seen at • Cooler Master TD500 Me... and the Case Review at • Cooler Master TD500 Me...
Useful Links
• AMD Ryzen 7000 Series PC Build Guide - • AMD Ryzen 7000 Series ...
• How to make a Windows 11 Bootable USB - • How to Make a Windows ...
• Motherboard Drivers - www.asrock.com/mb/AMD/X670E%2...
• NVIDIA Drivers - www.nvidia.co.uk/Download/ind...
• Armoury Crate - www.asus.com/motherboards-com...
• Cooler Master XG Plus Platinum Overview - • Cooler Master XG Plus ...
• Cooler Master MasterPlus+ - masterplus.coolermaster.com/
Music
Deep Space Samurai - FOREVER SUNSET
www.epidemicsound.com/track/1...
#pcbuild #coolermaster #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc

Пікірлер: 69

@Djirkali Жыл бұрын

Apart from being incredibly informative (which they are, they are the best how to build vid's on KZfaq) your voice is just so relaxing, its almost ASMR pc building. Thanks Chris love the channel

@PHiLaVaNiLa Жыл бұрын

I love watching your videos man, super relaxed and very informative! Also always jealous of all the builds you get to make!

@Vinch22 Жыл бұрын

Another fantastic step by step guide Chris. Keep it up💪

@galog333f5 3 сағат бұрын

thanks you helped me a lot! Very usefull! I couldve done a lot of things wrong without this video.. :)

@hananexcalibur Жыл бұрын

A build in this case is always so beautiful

@user-hf5nt6vm6j 11 ай бұрын

I've just bought the case and about to buy the rest of the gear. I will make the PC next month. I haven't built a PC for 20 years, the XP at the time. I think I've watched your video three times and definitely when I am building the PC, I'll have it on again. I like the way you make it very clear. Cheers.

@fenwayandwrigley Жыл бұрын

Excellent build. I really enjoy these videos

@milanjovanovic4744 8 ай бұрын

Underrated channel, thanks for this guide

@nedandre1584 2 ай бұрын

Best and most detailed explanation of a build I've seen good job and thank you learned what I needed from this to get mine to work

@CatPurson 10 ай бұрын

Nice vid, I'm about to build my pc with this case, and the last time I built one was 15 years ago, this was nice refresher.

@napoficial7123 6 ай бұрын

Just ordered this cage because money and this tutorial! Thank you very!

@napoficial7123 6 ай бұрын

Nobody ask you! See, not even a like in your comment 😂

@petpan82 Жыл бұрын

another high quality video, great job

@stebrad123 7 ай бұрын

Excellent presentation Chris. I've got a similar build to do on the weekend

@MikeBob2023 Жыл бұрын

Another great build! 👍

@deepak-ui5li Жыл бұрын

Wow what a great build video

@wewjad Жыл бұрын

Very detailed and informative. Thank you. 😊👍

@adamhearts9195 Жыл бұрын

thanks for the walk through,,, excellent build. I'm doing one in this same exact case and really found the installation helpful 🎉

@adamhearts9195 Жыл бұрын

ughhhh, my td500 top lid will not come off, the screw holes are there but they are not used. instead theirs rivets in the surrounding areas. 😢 no idea where this 280mm x63 is going to go,,, I guess the front..

@Nite-Lite-Gamers Жыл бұрын

Great explanation of all aspects of the build even dow to 3 pin vs 4 pin fan headers.......

@gorgiarsov Жыл бұрын

Verry good pc build you helped me allot.

@IAMNOTRANA 9 ай бұрын

And people say black GPU don't look good in white build.

@exot1c_dark066 4 ай бұрын

cause it doesn’t 😂

@kakal33 Жыл бұрын

nice build 👍

@user-ds6ki9zi3o Жыл бұрын

Another quality build Chris, very well done pal!! I have noticed that lately on your builds, you prefer the exaust option for the AIO while previously you were more kean to have it as an intake especially with mesh panel cases. Is there a reason behind this change? You prefer to provide more cool air to the gpu in order to keep it cool and having the cpu running a bit hotter? Do you consider it a balanced compromise since the new GPUs are running hotter? Thank you again for the video.

@peacegamer22 9 ай бұрын

Amazing

@threadder0076 8 ай бұрын

Thanksss a ton

@bradenhobbs1790 7 ай бұрын

Awesome video and very informative! Are you concerned with the total number of exhaust fans being more than the intake fans?

@medhammamchebel8605 Жыл бұрын

My OCD likes these videos

@ElCidPhysics90 4 ай бұрын

Been watching your videos for the last week. They are impressive. I’m about to build my first pc. I have the TD500 mesh and the x470 motherboard. How do I connect the argb front fans to the motherboard? The x470 has only rgb not argb.

@nikknukem7125 5 ай бұрын

Hey Christopher, that was a very nice video. I do have a question regarding the GPU adapter. I am planning to get an 4070ti (idk the version yet, probably the white TUF) and I also want the lian li strimer plus. My question on this is after I plug the 2 pcie 8 pins to the adapter of the gpu, can I then use the 12 pin strimer to connect the GPU with the adapter?

@Antoniobaldes-sk8gl 9 ай бұрын

Great. A question. Should the 3 pin cable of the fun hub, precisely the one at 5.38, be connected to the motherboard or not? And what is it for? Thank you

@CoolCraig31 Ай бұрын

Can you change the rgb through software if you plug in the argb connector to the controller on the back or does it need to be connected directly to the motherboard?

@ChandanParihar87 10 ай бұрын

Hi Chris, which software you use to control RGB on case .

@ivkotooo 11 ай бұрын

Hey, i just swapped my old case for this one and i connected my exhaust RGB fan PWM cable to my motherboard and the RGB to the extension cable from the fan console like the way you did but it doesn‘t light up. Any solutions? Thanks in advance. Great video by the way! :)

@abhishekbharti4857 11 ай бұрын

When you unplugged the argb headers from the motherboard were you able to use the software to make changes in rgb ? I have yhe same cabinet and my pins are also connected to the motherboard. I want the buttons to function but i don't want to lose the control through software. Please advice. Thanks

@JosePto Жыл бұрын

Hi Christopher! I will be on AM4 for a few years more and I'm struggling to decide. I have a 3060 Ti, I don't play games that often (but I like smooth gaming at 1080, I can't do higher resolution at high refresh rates) and a 3700X. My options are: 1. 5700X for 210€. Runs cool and boosts up to 4.6 GHz. 2. 5800X for 250€. Runs hot but boosts higher, performance improvements in games is marginal. 3. 5800X3D for 370€. Runs hot, boosts the lowest, performance in games might not be worth the cost using a 3060Ti. What would you do?

@n64slayer 3 ай бұрын

Does this collect a lot of dust because I have an aio cooler int the same config and it seems that it has severely bad negative pressure leading to a lot of dust build up

@ilkertarkan4624 Жыл бұрын

Great video! My PSU doesn't have a USB cable, do I need one?

@GUCFan 8 ай бұрын

You removed the HDD cage but should i get this case and keep it since i have a 8TB HDD for storing games i don't play actively, does the cage impairs modular power supply cables?

@knightwik 11 ай бұрын

Mr F. (Flannigan) i like your funny name xD

@jdflowz450 8 күн бұрын

How do you get a static color when i select red for example with the case button the red color is only pulse mode so it fades not static?

@Patriota_Rhone 5 ай бұрын

Hello. If I buy a Noctua NH-D15, can I fit it into this case? thank you.

@MrMartis913 10 ай бұрын

Would I be able to use a Razer RGB controller in lieu of the case's controller so I can sync all my RGBs through Synapse?

@sargeantstreamz 4 ай бұрын

Would a coolermaster ML280mm mirror aio fit on the top of this case?!

@cyndro Жыл бұрын

I dont have that usb c connector on my motherboard. Is this an issue, will there be any problems in the future

@thomasenright5282 Жыл бұрын

One thing I want to ask you not certain you would have a answer for this but if anyone can help with this I would be grateful for any advice I can. I got a AMD Radeon, Sapphire Toxic RX 6900 XT but it didn't come with a three pin connector that you can use with the graphics card and the motherboard could you tell me where I can get one to use for it.

@miraclemanoj Жыл бұрын

For cleaning how do we manage with cable management again?

@zugre 6 ай бұрын

what fan do u use on the rear?

@SaruBiatch 8 ай бұрын

the thing with the rgb button and motherboard is the only reason I am not sure if go for this case

@houzid1322 Жыл бұрын

Is the airflow good in this case? U have 3 fans that blows the air inside and 4 out, it seems like negative airflow. Am considering the case for my build but need to be sure about the airflow in it. So any help with my question and am more than thankful.

@Fiufsciak Жыл бұрын

The back one isn't included, you don't have to force it if you're afraid of that. I myself am going with the built-in 3 fans from the front, and a 360mm radiator on the top, just like in the vid. I believe it'll be sufficient, time will tell.

@lovelylune3 6 ай бұрын

I've got a case like this and have clicked the RGB button on top and it does nothing. Can someone tell me why it's not doing anything and what the lights are supposed to look like from clicking that button?

@aboodymoin Ай бұрын

how can u change the rgb lights from the reset button ?

@DetaiIist 11 ай бұрын

I have a question can noctua nh d15s cooler fit this case?

@bilge677 11 ай бұрын

for some reason my motherboard (X670E-F from ASUS) doesn't detect the ARGB Gen2 as being plugged in so I can't control the RGB. Has anyone else had this issue?

@thomasenright5282 Жыл бұрын

I hope you don't mind me asking, but two things would not need a bigger power supply for this build I mean to say your only using a 750. Second one are you having any problems with the 4070 as I head that the new models are causing nothing but problems.

@nolyfe4814 11 ай бұрын

Heard the same thing. Gigibyte cards are breaking. Msi’s version runs hotter then the other ones. I’m not too sure about the other models but no one’s seem to have problems with asus cards so I’m shooting for that myself. I’m gettin the 4070 one and a 4000d airflow. It’s cheaper and just as good as the cooler master