When tgey are rolling at 140 mph, they're gonna look AMAZING..

Looks good from my house!!😊

You are painter great job you see impression a nominal person wouldn’t see

I think they look awesome. I like the look. SEND IT

I love it when people test shit before I do... thx

it shows every imperfection

looks fantastic!!!!!!

I remember when Dennis Anderson built King Sling they used the same process it looked good your too picky dude, we our always our own worst critic, I love your work look at ShowMod enough said.

Love the inkwork on your left arm bro! And TY! Im doing this on the wheels on my current classic motorcycle project . looks WAAAY too good not to!!! An artist is his hardest critic. You are on yourself. Pursuit of perfection. Mount em n roll em! lookin GREAT!

Looks great

Nice!

You can see the potential of the product.

Imitation chrome feather dusting looks good Courtney

looks good

Yes the black Crome looks better. I was pretty impressed with how the product looked.

It's like any paint job. Prep work makes or breaks the paint job.

love your upfront views..I was thinking to myself ..What if you were able to pre heat the rims and then do you base work out..maybe after each coat heat them again..kind of like a powercoat..just a thought...

Thx for the video..

Damn dude. That really turned out better then i thought. think im gonna order some now.

Chrome color paint!

You did a great job on those rims , who going to get that close up and look at it . 👍

I think if you sand it down with some fine sandpaper then clear coat it. it would come out great. you have a lot of coats of paint

Great video, keeping it real. I believe that product would work great but probably have to do a high end paint job on the rims with a lot of wet sanding maybe all the way to 3000 on the primer and paint with a cut and buff after color sanding. I’ll send you a picture in a couple of weeks because I’m going to try this out on my Ram 2500 rims

On a side draft booth wouldn't you want to face the wheels downstream from the intake filters, so your paint surface would be shielded by the backside of the wheel.Dirty air movement would be toward you and you could dust the product on without the trash getting in it. Just a thought.

Those look great!

I think the black chrome rims would look really good on your car my opinion it would just be different

For what you started with,really great product. I could see the results on camera when you sprayed a circular pattern,might be easier to keep the coverage the same considering how you have to set your gun up. I would send it!! Those are nice. If you’re not happy,repaint them. Just because I like,I’m also not there in person looking at them. Great content!!!!!

Run them rims. Never see the imperfections on the Racecar. Haven’t seen OMNI in years . Good stuff. Spray. Finish 1 now.

Makes me think of the MTX thunder square subwoofers 🤟

When you only had only a couple of coats it had a good black chrome look also. I wonder if you cut and buff to remove orange peel would work?

Idk if I like them but man that paint is pretty cool man I wrote this before seeing the final product but on camera it's awwesome

The wiping on this is actually very essential for success, because this product contains TIN which is VERY SOFT and need to be SMEAR polished to get best results.

I did a helmet once where I painted it gloss black and did a very fine mist over the black with hardly any coverage and it looked like black chrome. The helmet owner loved it and brought other parts to do and it worked out well. I've never clear coated any of those parts either. It looked good for a while until it gets rubbed on or waxed. Just refrain from touching it during the procedure.

You know it’s all in the prep

I wish we could have seen it in the sun.

Looks good to me 👍 So what did you figure out was going on with the threads when you were torquing the beadlock rings?

They look good on camera. I really like the color and it will look good on the car. Definitely can’t see the smudging at 160+

They look sweet on camera bro

I did Kye Kelley's Shocker after he got on Street Outlaws. Long story but he gave me the original Shocker Weld wheels that were painted flat black. They didn't sand them thank God. A little paint stripper and polish they look new. For sell if anyone wants them. 👍

I see it working. You get a metal look.

Looks nice to me. Can I polish the black finish before using the chrome paint?

Run It!!

I say put them on man. I like the black chrome look. But ultimately you gotta do what you like man

Hey bro there are places in your video we can barely hear you talking you need to have a better microphone other than that you're driving along you ain't never going to see those imperfections that looks amazing

I use to repair wheels,we called it dark hyper silver

Black chrome would look good on Percy I’m also a fan of black wheels.

Ppg use to cycle their good production clear to omni brand after they created new clear. Ppg 2001 went to omni and so on I was told years ago when I used ppg.

I don't consider this a fail. There are tons of custom wheels out there that are peeling and trashed and for a low budget build you can do some great work with this stuff on literally cheap/free wheels.

Paint the car with thus!

😮

So you painted them black, added the chrome on top and then covered it in black…. Maybe I’m different, but anytime I try a new product, recipe, etc. I always follow instructions to the letter the first time so I have a base line for results. After that I can try different products or procedures to see if it really matters with the final product. But winging it off rip is crazy to me

If you use a intercoat clear with the candy it will dry so fast like base coat you won’t have to worry about runs being it flashes so fast and you can tint it to the darkness you want then 2 k clear it I think you will have the results you want 👍👍

Look , cool - mini sand / buff ??? But time is money & perfection is more $$$. + Experience products chill. (( U.k. )) Love paint.

🎉🎉I THINK IT'S A GOOD EXPERIMENT 🎉🎉 THUMBS 👍

Does this come in black to paint over stock chrome wheels?

WHen u hit it with clear i cringed a little coz made the same mistake, clear coat kills chrome and even gold for some reason they dont mix well. Great job though, now u can color sand and buff them to eliminate the defects.

not finding this chrome paint, do you have a link?

Otterbox has a lifetime warranty on all products. They will replace the case for free. Luv the videos..btw

I NEED TO GET SOME THINGS FOR MY EJ1 CIVIC DONE IN CHROME,

5 FOOT RULE! Does, and will look SWEET at 165mph!! Next time follow the directions!! Knuckle head! Great content. 👍🇺🇸

I would say slap the tires on and send it but from watching all your videos something tells me you will strip them and repaint them 😁

I've been wanting to see this done, have zero experience w/it. Been out for 6 or 7 yrs I think too. Maybe throw some corn starch or gravy maker in it. (The isopropyl alcohol strips out the static charge, I know the guy who got $10k in the early 90's for suggesting that to his General Motors supervisor on cavaliers after the square body trucks were gone n went to Ft. Wayne Indiana)

It just looks perfect on camera, just was getting kinda giddy wit all the swirling 😅 I'd say RUN it

I’m not anyone to give an opinion but I think they look bad ass and I think I’m gonna paint a guitar that color and I’d like your opinion on how you think it would look

Hi, could you drop the link for the chrome paint? Thanks!

Only way I would do wheels is on a rotisserie so it got super even, uniform coats.

I'm not sure if my powder coat chrome looks better. I was going to try again, but now you have me curious about maybe using paint.

I wouda wiped it down with alcohol first. And don't touch it beween coats unless you give each coat a few hours at least to cure. And blow dust out with air.

I would try to clear smoke style , tint smoke . May be metallic with darker center outer tint collor match body color . All all the paint clear tint 5% ----75% what ever & try a test stick spraw 4 inch & do extra pass x100 if you have to try claer & maybe pearl effect . just a sujeston * What do You all think ? They got many wraps out there channels & some dip as well That can peal off clear & they would be the first place to look They do a stone chips clear that clear and scratches dont stay sun heats soft vinal recures 95% of them. Real see what they got . **commment anyone what you think **

It's worth a shot just putting tje tires on and seeing how it looks. You might be surprised.

You need to use a particular clear with low solids & no solvents to keep the chrome look. If there is any solvent in the clear it will kill the reflective properties of the paint. I was a dealer & trainer for Alsa paints Mirra Chrome for 7yrs. This looks like they use the same process as Alsa Mirra Chrome. The chrome look on the wheels failed due to the clear used. Also whatever you are painting must be completely dry & de-gassed otherwise you risk more problems & if you put too much chrome on it will delaminate from itself. Very light dust coats is required.

I'd, run em, my friend. BUT, could you wet sand, buff and polish them? Since, you have clear coat on them?

They look awesome….quit beating urself up

You should always follow the directions to a tee. I think the people that engineered this coating process know a lot more about it than you do.

Can you clear coat it??

They are definitely different

You're using Omni?

I use this process on rc car bodies

oh fk i did wait to clear coat it😢 maybe i should read instructions lol dam

What if you powder coated them and do it again

Could you of powder coated them black first?

Just clean the rubbish on them and start again keep the area clean will look cosmic then 👌

That looks frosted chrome on KZfaq.

I would put some radials on them and put them on car and run them. They will look good on the car. Real men read and follow directions. lol

if spectrachrome or cosmichrome were to ever make a spray system in a can, it will be all over with for other paint companies.

See i have always hated black wheels but the black rims and polished centers always looked good, the way the camera shows that it looks like a blend of black and chrome….ish. Ive also never cared enough to worry about keeping wheels prestine either so the way those looked would be perfect for me except for one thing….once you bolt them on and the washer face rips the paint off around them, you will be doing something to cover the bald spots lol

Any link for the product ?

microfibers are the ticket. i use them everyday wiping cars down before paint. they pick up everything. hardly ever use a tack rag anymore

I get the runs pretty consistently you get used to it, keep a phanny packmani

I totally get how camera and in person is substantially different I think if you fallow there process buy the T also if your that picky why can't you build up the base sand and clear then sand to the edge of flat as flat can get then spay it ? Isn't that the process on getting paint flat 🤔 personally idk I have painted Mazda rx7s back in 90s early 2000 with sindlfle stage even cleared got my white one to look nice it was white but still I cleared over it like it was not a single stage lol after some sanding and buffing she looked shetynyc aka. "Shitty-nice" 😂 I always loved painting I grew up in a show car household my dad owned a 79 vette that was candy apple red with silver base all emblems were shaved and handles molding exc car won multiple I mean alot of best of show paint it looked like a sheet of glass this is in florida heat as well if you ever done any body work especially with a glass body and those horrible rubber plastic bumpers they sag fiberglass sags bad in heat that car still today is in the exact condition it was sold in no sag the owner of a major chevy dealership owns it now i think glass moves alot I take no credit for the work I will put him on blast his name was mitch at cross roads body shop in Deltona FL he is the

how about leave it alone . you are the only one that will see this .. Never point out your flaws .

Bro those look good on camera i mean i dont knot know what they look like up close i think your too picky lol you do damn good work look at Randys car 🚗 the showmod ill tell you what how much you want for them you done a great job on thwm im impressed i may buy you out of them what size rims are they i run welds anyways.

Courtney your to hard on yourself they look great slap so tires on them & roll with it

Yes, indeed, you TOTALLY sabotaged yourself.

Looks decent but it’s definitely a learning curve 😅 Sand them down and redo them or you won’t be satisfied.

a test when you skip the steps in the directions ?

looks like chrome to me

I actually liked the gloss black finish. I'm going to powder coat my rims gloss black. Then throw them in the oven, let them bake 400° 20 minutes.

You had one job.....

At 60 mph no one will notice