Worked for me... 2000 Grand Cherokee. Used a Launch Diagun V in the "PCM > special functions > check VIN" part. Fantastic. I took a pic of the VIN on the screen of the Diagun once it auto detected it, then I had to manually enter the VIN to re-write the used PCM... then the same thing of turning off key after that was successful, plugging in SKIM module, and start up car.

Thanks for the help...been a mechanic for over 40 years and I have never replaced an engine computer with the battery hooked up. Just had to bite the bullit and buy that scanner you have for $3400 but just using it for the first time it outperforms the Snap On Verus Edge that I have now that was way more expensive. can't wait to try to reprogram a key. Much Mahalo from the Big Island of Hawaii @ Kolohe Auto Repair. My repair was a 06 PT Cruiser with no communication with the ecm/pcm and transmission stuck in 2nd gear. All is well now.

I just found you and this is like Christmas! Thank you! Best wishes from Sweden!

Great tip, you saved me time money and the trouble. Thanks for sharing your knowledge, I appreciate it very much in deed.

Why do you have a oil lite and check engine lite with vehicle running ?

Experience diagnosis amigo. Nice video

New to the Channel great info but will this work on GM CARS

This is VERY good information, thank you Sir !!! It surely will help. Very clever technique.

Thanks bro, this video just helpex save this old lady from junking her old car

This trick is great. But I guess the Calibration number of the original ECU and donor should be same before this trick will work right?

Any other cars can be done by this system? Thanks for sharing your knowledge Sir.

Fantastic trick

Great tutorial sir. Can i use other scanner like easydiag? Thanks

Thank you for sharing the video. Very informative. I noticed you used the valet key in the video. Will this procedure work with the key that has the key fob attached?😊😊

Have you ever tried this on a 2015+ Manual challenger? Or do you have any suggestions?after vin write Car shuts off with security light blinking.

Thanks, headed to pul-a-part today! 2000 Dodge about to live again...

Question? If the new computer has security but the car I’m working on doesn’t have immobilizer ?

How do I program the original immobilizer to a 05 liberty with the ST95080 chip being replaced cause it was corrupted

I have that problem now in my 2002 Dodge Durango but I already changed the PCM without disconnecting the IMMO and is not turning on

Excellent. Thank you.

will that work on a 2007 chrysler 300

You save my life , my friend !! Thank you!!

Can this Ecm replacement trick be performed on all cars especially when you disconnect the immobilizer and reconnect after the PCM swap or it only works on this model? Will be glad to know more thank You Sir

Could someone recommend a budget friendly machine?

So the car retained its original key and skim reader with only the PCM replaced ? Does the VIN reset process enter SKIM ID in the PCM ? I thought SKIM, PCM and key had to be a set. I know that wrecker yards offer the PCM, SKIM READER AND KEY saying it will get your ( Grand Cherokee 2002 in my case ) running but it doesn't because the VIN is wrong. Some sell them after entering the VIN code you supply to them. I can't find anyone who can tell me what the VIN in the PCM is reconciled with in the car. Is it the BCM, The trans controller, what ? Surely it's not just the SKIM reader box on the ignition barrel because that supposedly matches the PCM you got it with. Is there another element between the PCM and the SKIM reader ? Real confused ( just like most people It seems )

Can u reprogram the used computer for the Japanese cars with this scanner?

I hv a 2004 Nissan Altima with a p0335 code I hv replace the crankshaft sensor and check the wire for a short . I want to replace the ecu with a used one will this system work for my car?

Good morning

Instead of disconnect can do a skim reset works fine

Can you also do this with abs modules for example rams 2012-2016 or town and country 2008-2013

More videos please of programming

Hi I changed the reader and computer box if program keys will it start ,or mus realine vin

Was the used PCM from the same year of vehicle and model as the original? If not were there any issues from other modules?

Hey can you do this if you go pull a PCM from a salvage yard car and replace it with your car’s old PCM? I’ve heard if a used PCM already knows another car’s VIN you can’t reprogram it to your car

Great tip, it helps a lot.

can you program bcm modules with that autel im608?

you dont have to dissconect the immobilizer just write vin

Thank so much to share information.

Great video, I have a question, do you know how to program used ECU for 2016 Challenger? I tried it with im608 changed vin number and add new key but still engine not starting. Thanks in advance for help.

EXCELENT !! THANKS..!!

Sir what was the scanner you used to program the pcm

Thanks for sharing

صديقي انا من العراق ولدي عطل في السكيورتي لجيب 2007هل يمكن الغاء ايموبلايزر ام لا؟

The check engine stayed on bc you didn't reprogram the skeem modules.it will runs for a couple of day.but it won't turn on again

I think the autel I'm 608 is only to program the keys

Will this work on a Cummins 5.9?

It is exactly what I need

i have a dodge challenger 2010 rt manual i replaced the pcm module. the key works the functions but does not release the ignition for the car to start what could it be? please i need your help

Does this trick work with Ford cars ?

Nice , this trick work just for jeep?

Hi. What about the oil light and engine light on? Related with the new pcm?

thanks

What years and models does this apply too?

Nice trick

Why the check engine light on after the new pcm? How did you learn this trick?

Only works if you have com to old ecm...

Ok

great , but what if your existing PCM is dead no comms?

Can we do this for models 2010 up?

Brother I have problem with my car can I get your Whatsup

Witch is much better than autel on dodge chrysler jeep

Too much trouble

Thank you my brother … please I want to contact you because I have problem with my jeep can I get you Whatsup ?