CID Heavy Duty Brush Cutter Skid Steer Attachment

Рет қаралды 301,558

Construction Implements Depot 336-859-2002

9 жыл бұрын

Our Heavy Duty Skid Steer Brush Cutter Attachment is made for the person that needs to clear a lot of acreage of under growth land and small trees. The heavy duty brush cutter attachment comes with a 60″ or 72″ mowing deck. It also features a RC100 gear box and a Parker motor. Comes with a fabricated blade holder. A hydraulic flow of 14-20 gpm is required.
If you have real big land clearing jobs and need a more powerful and mulching type brush cutter. We also offer the X-treme Skid Steer Brush Cutter and X-treme Skid Steer Piston Motor Brush Cutter. With three different series of brush cutters, we have one that will be the right fit for your skid steer. For small, medium and large land clearing jobs. CID has all your brush cutter needs covered.
Heavy Duty Skid Steer Brush Cutter Attachment Specs.
Open Front Heavy Duty Brush Cutter
4’’ Cutting Capacity.
3/16’’ Deck with 3/8″ A36 reinforced sides.
RC100 gear box.
Parker motor.
2 blades with 5/8″ AR400.
Does not require a case drain.

Пікірлер: 30

@danb4558 2 жыл бұрын

I think my phone knows I've been talking about this! I have the 78inch piston drive extreme. Have had it a few years now and it's an absolute animal and is heavy built. I've done things with it that would shock most people. If you can get to two side of a tree a 20 inch tree will come down!

@kyjoe3403 2 жыл бұрын

I just bought the 72" Severe Duty. CID makes good equipment, they need more videos up.

@johnpoelking6249 4 жыл бұрын

Huge improvement.keeping up.

@warwagon 8 жыл бұрын

Thanks more relaxing to watch than it should be :D

@markfroman738 2 жыл бұрын

It’s all good to clear that stuff but you better spray that whole area with pathway afterwards

@user-or8ij9uy3k 5 жыл бұрын

It's great for small machines.　　Cute

@jordankindschi8529 Жыл бұрын

What good is cutting woody brush if it leaves jagged stobs above the ground? All I see is a future filled with flat tires, and/or livestock with punctured feet. It looks to cut very well, but being able to cut it below the ground is what is needed.

@VicsYard 7 жыл бұрын

I want it. Lol.... hmmm I'll have to see if my cat 257 can run that.

@OFFICIALCIDINC 7 жыл бұрын

I think yours requires 22 GPM hydraulic flow, so you would need the X-treme brush cutter which can be viewed here. cidattachments.com/product/x-treme-skid-steer-brush-cutter-attachment

@laerciorodrigues8769 Жыл бұрын

Queria ter ter um brinquedinho deste

@DocDryden 9 жыл бұрын

Do you make a Skid Steer Brush Cutter Attachment with a low-flow? My flo is about 12 gpm when the tractor was new

@OFFICIALCIDINC 9 жыл бұрын

Our Standard Duty Brush Cutter comes with a 60" or 72" mowing deck. It features a 30HP gear box and stump jumper. A flow of 11-20 gpm is required. You can also get it as a open front. Click here to see them. They are the first sets of brush cutters on that page, Thanks. www.cidattachments.com/xtreme_brush_cutter.html

@numberlucky7prophets 10 ай бұрын

I wonder if you raise up the knife plate to near 90 degree and keep going ahead , what will happen?

@karlk6860 5 жыл бұрын

I your going to EFFECTIVELY run a brush cutter having enough HP to run a HI-FLOW is the difference between 3 acres a day and 12 acres a day! I burned a full days worth of fuel on my T190 to to chop 3 acres of brush. I upgraded and the dealer is telling my I can cover the remaining 12 acres in less than 1 day. we shall see!

@wpog8453 4 жыл бұрын

Yeah your dealer bull shitted you too. If you're talking about mowing grass and weeds with a 100 hp tractor and 15 ft. bat wing, yeah. but 12 acres of brush and saplings with a skid steer in less than a day... no sir.

@luismigueldjdhsjsusususidi8775 4 жыл бұрын

Karl K se

@Cometlandscaping 4 жыл бұрын

Hi I own a caterpillar 226 with 15.1gpm Would this operate correctly

@IntenseInvestor Ай бұрын

@philg4116 6 жыл бұрын

bunny killer

@pw3543 6 жыл бұрын

Phil G Bunny skinner!

@davidsonlankford1168 5 жыл бұрын

These machines make lots noise. Mr Bunny can hear long before before chop suwee arrives. Can’t say the same for a fox , coyote or eagle who eat all the rabbits and never give notice.

@jimmyvaught 5 жыл бұрын

Bunnies tend to hunker down and wait for the inevitable chop chop.

@jimmyvaught 5 жыл бұрын

At least that's the case when I use my finish mower.

@luismigueldjdhsjsusususidi8775 4 жыл бұрын

Phil G l

@TheBrushcutter 6 жыл бұрын

Seems a bit underpowered.

@OFFICIALCIDINC 6 жыл бұрын

We carry a piston cutter also which is more powerful! kzfaq.info/get/bejne/rNyYpLFllcy3dZc.htmlm5s

@luckylawnboy 5 жыл бұрын

Construction Implements Depot 336-859-2002 how does the piston version have more power?

@bennyrlove 5 жыл бұрын

seems weak

@kevinelliott6318 Жыл бұрын

Dont buy the cid, Ok cutter but when its time to change blades you will feel stupid like me for buying one. They have welded the blade bolts to the carrier. Mine was ruined and they want do a thing about it