Hi Charlie, this might put a smile a smile on your face. Bought Black and Decker Circular saw in the late eighties, it died 2 years back so looked around for a replacement and bought a Ryobi RWS1250, have not used until yesterday in the wind! So set it up and start to cut and a few inches in it stops, motor working and no cutting. The old B&D was just fire it up and go, no need to adjust anything! So ended up finishing by hand. Quick hunt on KZfaq and I found your video and you answered all of my issues. Like you I had the depth adjusted too deeply - thank you Charlie for saving the day and my arm muscles!!
@tinamathis5394 жыл бұрын
awesome video. I was about to return my circular saw back to the store. Only because I was not comfortable with it but now I can reference this video when needed. Thank you
@madpoet4 жыл бұрын
A skilsaw and speed square, the perfect combination. I've been living in the UK for about ten years now and y'all are using the speed square more and more. Thanks for posting.
@klausreviewscraftrestore31524 жыл бұрын
i am a furniture maker and had to spend big bucks on alot of tools, but also i still use a circ saw on a regular basis. good tips for beginning wood workers. really a must have saw.
@MrNat4Real6 ай бұрын
Many thanks for starting all the way from the scratch, of setting up the table and attaching a vacuum-cleaner. This is exactly what I have been looking for.
@mickwhatley4 жыл бұрын
Good day mate. A friend of mine gave me a Ryobi saw and a 4.0 Ah battery. He said it was useless it wouldn't even cut plywood. So I took it home and tried it. He had the blade in backwards. He said I could have it. So now I have a really handy tool for the right price. If anyone one else has a Ryobi tool that's useless I'll have it.
@joakimyliruusi6 жыл бұрын
Thank you for a great vid! I bought my circular saw in the summer and it has been a gem ever since. Mostly used it for splitting timber but now doing sheet work. Great tips about the work table, which is a pain with big heavy sheets. Now I understood how I can cut way better! Also didn't know that the depth is so important.
@moshekwart40434 жыл бұрын
Excellent video, thank you. Many great ideas. One suggestion, when setting up your saw, whether adjusting the angle, the height or whatever, keep your battery out and on the table. When in the machine you are plugged in and handling the blade and in danger. The battery snaps in easily in a second, so save it for last. I appreciate your excellent video.
@pb48974 жыл бұрын
Omg. Is was thinking the same thing. Great video though.
@SuperDieseldriver5 жыл бұрын
Got one of these, I'm a joiner, what a great saw. Got to last row of laminate flooring near wall & sods law 3 X 1" strips to finish it off😣 this baby was a god send with the guide, made it a breeze to do thanks Charlie love the vids👍👍👍
@CharlieDIYte5 жыл бұрын
Cheers mate - and always good to get a positive endorsement from a joiner. Out of interest do you see any need for a plunge saw when you've got one of these. I'm planning a future video outlining the difference between the two. Obvs plunge saws run on tracks which is an advantage but Evolution do a circular saw that runs on a track. Possibly the best of both worlds. .🤔
@SuperDieseldriver5 жыл бұрын
@@CharlieDIYte the Ryobi does it all, just bought the evolution mitre saw 210 SMS & stand, that's great for speed for laminate flooring, cutting precise angles for spindles, both together is all the saws you need + love the multi tool...
@SamValiant6 жыл бұрын
For full sheets, I stick them on the floor on top of a sheet of HD foamboard, set your blade to protrude just a few mm below your workpiece. No point wasting time and effort trying to lift full sheets. Also better cuts as the whole piece is supported so no flex and you don't have to worry about the off cuts dropping on the floor.
@CharlieDIYte6 жыл бұрын
Great tip Sam - thanks for sharing!
@familyjones54034 жыл бұрын
Sam I adapted you idea and used bubble-wrap as it was a zero cost item for me. It lasted a while but I replaced it with cardboard from old Amazon boxes. Both "spacers" worked a dream and saved a huge amount of time
@MKRM274 жыл бұрын
I use an 8x4 sheet of 35mm kingspan insulation
@davidrowe87473 жыл бұрын
@Ring Tony Great idea! I'm just getting into DIY in my retirement and happen to have an old flat door - perfect. ;-) Presumably, you "sacrifice" the door (i.e., end up with shallow tracks cut into it from sawing wood on top of it)?
@MattPriceGuitar6 жыл бұрын
I just built two redwood fences with gates, each about 15 ft long, and made all my cuts with a circular saw and rafter square. It really is a great handy DIY combo.
@CharlieDIYte6 жыл бұрын
I agree - and I don't know what I'd do without my circular saw now!
@tilerman4 жыл бұрын
Great content Charlie. For a long straight edge i brought a length of Unistrut from my local air conditioning suppliers. Straight and true, and got a nice bit of weight to it. And really cheap. Great straight edge for all workshop uses.
@CharlieDIYte4 жыл бұрын
Thanks buddy! Yes I've got something similar - a long straight bottom section (hanger) from an aluminium electric roller blind box. It works as a saw guide and as with yours, has also doubled up as a general straight edge.
@RonnyOlufsen4 жыл бұрын
I use the exact same circular saw :) When I first bought my Ryobi tools, I got a smaller model circular saw, but it was too small for cutting 2 inch lumber which I do all the time, so it was rather useless. I then bought the model you have and It has done a ton of work for me :) edit: The other Ryobi tools I have found myself using a lot is the impact driver and the multi-tool. I don't know what I would do without them now..
@johnfranklin19555 жыл бұрын
Ryobi’s latest is Brushless tools and HP(high performance) batteries. The tools communicate with the batteries, when the tools have a heavy load on them they communicate with the batteries and the batteries send more power.
@EM-fh2tx4 жыл бұрын
I made a saw guide! So chuffed, it works great. Thank you!
@CharlieDIYte4 жыл бұрын
Fantastic - nice work and thanks for letting me know. It's a game changer, isn't it!! I'm sorry I never did that video - I'll be doing one in a few months when I start videoing my wardrobe build. What design did you go for in the end? 👍
@EM-fh2tx4 жыл бұрын
@@CharlieDIYte very basic from scrap in the shed. But with that and your great suggestion of the metal speed square, I made my first ever picture frames and mitre joins. Thank you so much, your videos gave me the confidence to have a go :)
@markjlewis Жыл бұрын
I have learnt so much from you since I discovered your channel a few weeks ago. I'm now going back through your previous videos to find more and more useful tricks and tips. Many thanks.
@GuitarsAndSynths3 жыл бұрын
I need one as well as a Miter and jig saw to fix stuff and build things.
@AbulHussain-hh9rg4 жыл бұрын
Your channel might be small But your info is priceless man. Ideal for the DIY person. Keep the videos coming.
@lordrichard81846 жыл бұрын
Great video!! I always use a corded circular saw because I don’t like how the battery ones always seem to die in the middle of a cut on me. Also if I have to cut large sheet goods. I cut them on the floor and put them on a thick layer of ridged foam insulation. This way I’m not cutting into the ground ruining my blade
@CharlieDIYte6 жыл бұрын
Billy bob Smith Thanks! The cordless saws are pretty good these days - and if you use a 4ah or 5ah battery you'll get hours of usage out of it.
@brianflower54905 жыл бұрын
I bought a new corded Makita circular saw this w/e down from £107 to £ 80 bargain !I do like Ryobi tools but couldn’t afford that one just now! Having said that this Makita saw is brilliant !
@RDR14564 жыл бұрын
brian flower hi mate where did you get the makita from?
@nicholascasatelli69494 жыл бұрын
You either arent using the right saw, havent kept up with technology, or else the battery you're using is shit. The Ryobi 7 1/4 inch Brushless circ saw should not be used with any battery that isnt at least a 3.0 ah HP or better......It's all about the Battery!
@areyoumad4it5 жыл бұрын
Do enjoy your videos Charlie, thanks! I'm also pleased you put links to the tools in the description because that rafters square looks very handy!
@CharlieDIYte5 жыл бұрын
Thanks, I really appreciate that! You're welcome. The rafters square is invaluable - massively recommend if you're going to buy a circular saw.
@tactical_snails21985 жыл бұрын
I like how you have a beare bones set up it really shows how much you can do
@mohabatkhanmalak11614 жыл бұрын
Thanks for posting, now I will be able to make those angled cuts. Wood is not my thing but at times we need to work with wood, such as building my work bench.
@VictoryForCake3 жыл бұрын
I bought a circular saw to cut out 400mm shelves for my garage out of OSB, I found it the easiest way to cut is to get a big 22mm OSB sheet and use that beneath whatever you are cutting as a sacrificial layer. No worries of your legs becoming unbalanced.
@CharlieDIYte3 жыл бұрын
Good thinking. So you were cutting everything on the floor?
@VictoryForCake3 жыл бұрын
@@CharlieDIYte Yep, using a guide bar I could do up 500mm cuts. I found it more stable when cutting on an uneven surface outside too.
@Sunnyat1893 жыл бұрын
brilliant video! Clear, concise and now really tempting me to buy a circular saw! and I don't even need one, yet.
@CharlieDIYte3 жыл бұрын
Thanks Neil, I really appreciate that. Check out my update video bit.ly/3scXIjp if you have a moment. Circular saws are an absolute game changer - you actually really need one! However the question you've got to ask yourself is whether you want a circular or plunge saw, or hybrid like the Evolution. I'd probably still go for a circular saw on balance.
@BrokenBaculum3 жыл бұрын
Very informative. Thanks Charlie!
@CharlieDIYte3 жыл бұрын
Thanks mate. Here's the update video if you're interested kzfaq.info/get/bejne/o9yTg9iG38XRZ2g.html
@naebadyersel2 жыл бұрын
Thanks for making this video charlie! You’re an inspiration and my DIY skills have greatly improved since watching all your videos! BIG fan!
@CharlieDIYte2 жыл бұрын
Aw, thanks so much Micheal. It's truly humbling to hear that. I did an update video on the circular saw kzfaq.info/get/bejne/o9yTg9iG38XRZ2g.html but when it comes to rails and tracks, I ended up buying an Erbauer plunge saw for my recent wardrobe build.
@djhaggerty20114 жыл бұрын
great use of the speed square... i use mine a lot... also chalk line for quick full legnth eye ball cuts.. and an old full sheet ubderbeath supports the board your cutting... no drops or strains and a 1 man job
@francissomadaly4043 Жыл бұрын
Great video Mr Charlie. I've underused my Ryobi circular saw for 3 years. I have to say, I just cannot get on with supplied fence. Ended up going back to my saw guide. I've learnt loads from your videos. Cheers👍
@CharlieDIYte Жыл бұрын
Thanks Francis. Which one did you have with a supplied fence? The new RCS18X can run on a plastic track but it's not widely available for some reason. I was still love the versatility of a circular saw and made this track kzfaq.info/get/bejne/o9yTg9iG38XRZ2g.html but to rip down full lengths of sheet material you really need a plunge saw. 👊
@francissomadaly4043 Жыл бұрын
@Charlie DIYte Hi Charlie it's an R18CSP; yours looks like and upgraded version. I can't find yours so maybe that's been upgraded as well 🙄 Ryobi themselves do 3/4 different circular saws so it's difficult to decide. Maybe I'll gift it to someone and get a newer model😂
@chfin72513 жыл бұрын
Very good overview of the circular saw. I learnt many things as I am new and looking into doing some DIY wood working around the house.
@CharlieDIYte3 жыл бұрын
Thanks. There's an update video here if you have a few moments kzfaq.info/get/bejne/o9yTg9iG38XRZ2g.html
@alanwallis24674 жыл бұрын
Watched your video yesterday with the bench witness horses which was excellent..I will make one as soon as possible. I have been using a piece of board over them. And in today's video round further I also did not realise to adjust the depth of the blade when cutting. I've now subscribed and will be catching up on more of your videos..Thank you
@cathymackay55343 жыл бұрын
Thanks for that. I like to do a bit of DIY - husband is a retired builder but the clue is the ‘retired’...I don’t like asking him when I’ve always done my own stuff, anyway. I have that particular circular saw so your video was particularly useful. Cheers, xxx
@CharlieDIYte3 жыл бұрын
Good to hear from you Cathy. Yes, it's a great little tool. I couldn't manage without it!
@SamiMarjeta5 жыл бұрын
I came up with exactly same kind of guide few years ago. Then I got tired of using (it was clumsy and needed clamps also) and I bought a better quality plunge saw. The guide rail you made can be adapted for cross cuts also. Cut a ~30cm piece and screw piece of plywood vertically to the end. You push that piece against the wood you are cross cutting and get 90° cut. It doesn't slip as easily as speed square and you don't need to mark that ~3cm distance between blade and end of saw table.
@gdr884 жыл бұрын
Which one did you buy later?
@MZDIVERSE3 жыл бұрын
Thank you. I constantly revisit this video for reassurance.
@CharlieDIYte3 жыл бұрын
Aw, thanks for that. Have you watched this updated version kzfaq.info/get/bejne/o9yTg9iG38XRZ2g.html 🙏
@leonking94595 жыл бұрын
really learned new ways of using circular saw from you, thank you for showing your ideas and skill..keep up the good work..
@CharlieDIYte5 жыл бұрын
You're welcome - many thanks for taking the time to comment!!
@davidmiller96742 жыл бұрын
Picking one up tomorrow to make some cabinets with for my camper conversion. Not this make but same idea. Glad I watched your video for tips. I would have set the blade far too deep like you first did. Best I get some of those horses too. Great video, thanks.
@CharlieDIYte2 жыл бұрын
Good work David, you'll love it. Get a rafters square and some clamps too. 👍
@davidmiller96742 жыл бұрын
@@CharlieDIYte Already ordered 😁
@RockyMountainGuy345 жыл бұрын
You're a delightful young chap, Charlie. Thanks for the tips.
@galland34966 жыл бұрын
Thank You Charlie. I have a RYOBI CORDLESS circular saw and it is great. 1)...it's light 2)...it's quite. 3) it works great. And it's such a good little friend. I have a number of circular saws, but this one I go to first time for general and light work. Thanks once again for your work.
@CharlieDIYte6 жыл бұрын
Galland 34 You're very welcome - and thanks for the comment - they're great tools aren't they!
@jesterraj Жыл бұрын
Great to see you can use fit tool and make great stuff...
@tonysimms98384 жыл бұрын
The fact that the saw has a left sided blade is great for right handed use. It allows better vision of markings while making cuts.
@CharlieDIYte4 жыл бұрын
Agreed. It's a great little tool 👍
@Vyker6 жыл бұрын
This guy is brilliant! Great vocabulary too! Subscribed!
@freewaybaby4 жыл бұрын
The only size I have ever used is a jigsaw because I’ve been scared of not knowing how to use other saws and the potential danger of kickback from a table saw, etc. But, trying to use a jigsaw for everything is just very slow. I considered a miter saw but knew that I couldn’t use it to cut long pieces. You showed me, in this video, what I need. Thanks! You have a new subscriber! I’m older and a woman...and complete novice to woodworking! Looking forward to learning more from your videos!
@CharlieDIYte4 жыл бұрын
Lovely to hear from you Marcy. There's no kick back from these battery powered circular saws - I used to use a jigsaw like you but honestly, this has been a game changer for my DIY. You just need a straight edge to push it along and then you're away. The alternative is to buy a plunge saw that has its own track that the saw runs up and down and can't deviate off. You get a more consistent cut as the problem with a straight edge is that the saw can wander a bit if you're not careful to keep applying pressure against the straight edge as you push the saw along, but circular saws are lighter and more versatile than plunge saws. I'll be doing a video all about this at some point but right now I've got a major uphill battle with the bedroom that we moved out of in February 🥺
@MoranGuyVideos6 жыл бұрын
Circular saw is a must have tool for anybody who wants to start woodworking project , this is the next level for jigsaw , etc.
@caspaabriel47942 жыл бұрын
So Charlie just brought a CircSaw. Didn't do that good, till checking out you vid. Now suddenly, all makes real sense. Ta Much
@CharlieDIYte2 жыл бұрын
Yes mate. The blade height is crucial. I was the same - nearly threw it away before my carpenter mate showed be that trick.
@smokymountainlife5 жыл бұрын
Wonderful video! I just bought the Ryobi circular saw today and will receive it in a few days! I also made the decision to go with Ryobi products because the batteries work for all their power tools. am so glad I ran across your video. It's just what I needed. I cannot wait to start using my circular saw! Thank you so much!
@tonyshenton41236 жыл бұрын
Thanks Charlie, you should be sponsored by Ryobi, I bought this saw on the strength of your tutorial, keep it up
@CharlieDIYte6 жыл бұрын
Tony Shenton Thanks Tony - really hope you find it as useful as I have! I think they're a pretty complacent bunch on the marketing side - I've tweeted them a couple of times and haven't had so much as a single response. Never mind - I think their tools are ace!
@stuartosborne62634 жыл бұрын
Thankyou so much, I may finally use the circular saw that's been sat in the garage for twenty years!
@CharlieDIYte4 жыл бұрын
You must. These things are game changers! Thanks for the comment 👍
@500Rufus5 жыл бұрын
Brilliant presentation, great for using with a cordless saw, problem being mine is corded. But the concept is very good to show part-time DIYers like me,
@PedallingwithPaul4 жыл бұрын
This was a very good video for me, I have been using my circular saw! I have 2 smaller and bigger and have been watching lots of videos about using it in the right ways. It never crossed my mind to use the saw guides in this was as I bought some years back for my jigsaw. Thank you for a very well made video, I used some of these tips just today working on a DIY project building a jump for my mountain bike ... fire pit jump
@dlamb28406 жыл бұрын
Hiya Charlie. Wanted to just throw an idea into the mix. I’ve got an Evolution circular saw ,pretty inexpensive but it’s been hard to fault in all honesty. The thing I wanted to mention was the supplied rip fence. This will probably apply to most circular saws. The standard (supplied ) item is about 3 inches long, and I tried it out. Relatively poor results. There are screw holes on my guide to allow you to attach a longer length of wood ,( in my case ,quarter inch ply off cut, with the finished face acting as the guide). I got a scrap piece of plywood about 12 inches long and attached it to the supplied fence, the difference in end results is incredible!! Long runs on a board are given a much wider and more stable support! I did all this work this on your superb Stanley workbench upload. AWESOME incidentally!! Thanks.
@CharlieDIYte6 жыл бұрын
Hi there - thanks for the comment (and of course for supporting the channel!). That's really interesting. Are you saying you're basically extending the length of the fence by screwing the 12 inch piece of ply to it? I've got an Evolution Rage chop saw that was ridiculously cheap for what it is - think it cost about £130. Got to say I'm really pleased with it. The tool snobs on this channel would be in uproar that I didn't spend £700 on a De Walt, Makita or Festool, but as the old adage goes "bad workmen blame their tools!"
@dlamb28406 жыл бұрын
Charlie DIYte Thanks for your reply Charlie. Yes, I think that is the purpose of the two small holes on the detachable rip fence. It makes your fence a little ungainly for the tool bag but it’s worth it. The extra length greatly improves accuracy, particularly at the start of your cut where the extra fence length adds stability. Of course you need to factor in the thickness if the piece of plywood you have added to your fence when measuring. Give it a go. Great channel CheersDavid.
@jimbo26295 жыл бұрын
I found that extending the fence made it too difficult to handle.
@TheGrandFanelli6 жыл бұрын
Brilliant! I can't wait to show off the new skills I've learned. Thank you ao much!
@CharlieDIYte6 жыл бұрын
You're very welcome!
@lewiskennedy51523 жыл бұрын
Appreciate your videos!!! You don’t just explain things expecting people to know everything already
@shifty2776 жыл бұрын
Fantastic pieces of kit these are so versatile. Some small tips if someone is going to go out and buy one... Look for soft start and an electronic brake. These make a huge difference for me personally as I have a Makita 18v Brushless saw with these and also a 10 year old 240v version without these features and the older version feels a hell more dangerous or daunting if you like for a beginner.... Great pieces of kit with a straight edge clamped to sheet materials of a 12" rafting square! Great video Charlie... Would have gone for the slightly more Makita DHS680Z and a 5 amp battery at £200 all in from Amazon but you are invested in the Ryobi platform I presume. Thanks, thumbs up.
@MultiDonna264 жыл бұрын
That's really helpful for a beginner like me.
@coventrykid4 жыл бұрын
Just bought a similar saw, different brand. The tips on this video are most welcome though and well explained. Many thanks
@itube00336 жыл бұрын
I've just seen your video on silicone and this one and you've got a new subscriber. I love how you explain everything.
@CharlieDIYte6 жыл бұрын
Thanks so much - I really appreciate that!!
@danbailey81826 жыл бұрын
I am a very novice woodworker aka CRAP! I never used my circular saw because it always wandered. Thank you so much for the blade height advice and I sure will try it. You have another new subscriber!
@CharlieDIYte6 жыл бұрын
Hi Dan - I really appreciate that, thanks! Yes, definitely give that a go. I was ready to throw my circular saw away until a chippy mate pointed out the blade height thing. Now I couldn't manage without it! Finally, you're not CRAP, you just need a little practice!
@oldfartbrewery6 жыл бұрын
Brilliant you started me off with your wardrobe and I have bought the plainer router and circular saw and thought that's my hand cut off because I had no idea how to use them so still in the boxes. Your a life saver now time to get cracking cheers Jim
@RonWylie-gk5lc4 жыл бұрын
Dont buy B&Q own brand, they DO change their battery tools then change the battery design, I have had to chuck several tools I bought from there. Another great and practical video Charlie thank you, you have a new "Sub" to go towards your sponsership by the big companies
@CharlieDIYte4 жыл бұрын
Thanks Ron, I really appreciate the sub! No sponsorships as yet but I'll have to embrace them some day if I'm going to do this full time.
@danieldanix15 жыл бұрын
Thanks for the demo, it really was interesting and very well explained. Good job, I will def get that Ryobi circular saw.
@sabicsepregi65215 жыл бұрын
I saw the corded version of it in Homebase for £45 today. I'm picking up one of them for sure!
@andrewwilson87176 жыл бұрын
That fence your made is genius. As soon as you can do a vid on you're improved version I'll be making one. I've always struggled with getting my cut line and fence line in the right place so this should help!
@xuser484 жыл бұрын
I use an aluminium spirit level as a saw guide with my Ryobi R18CS.
@mehranfreeman61925 жыл бұрын
This one you have is small one which is awesome , I had same for several years , last year it was stopped working , I bough it's bigger brother (185mm) it's brushless but unfortunately the blade is at right hand side , for me the older one (one you have) was much more comfortable to use than the new one. I recommend do not do my mistake , I will buy 150mm again.
@CharlieDIYte5 жыл бұрын
Thanks for that Mehran. It's a great little tool isn't it! Thanks for the warning about the larger one. I think my next one will be a track saw but they are bigger and heavier.
@joelwinter49564 жыл бұрын
I started woodworking with essentially two tools: A circular saw and a router--on my apartment's kitchen floor and small back porch. Started with a bookcase, then a coffee table, and never looked back. A drill is important, too--but so much can be done with those simple, cheap tools.
@howardbetts15114 жыл бұрын
Great video, I've just bought a circular saw, under stairs project to do! Lets get going!
@CharlieDIYte4 жыл бұрын
Great work Howard, you'll love it. Mine's been a game changer. You just need to make yourself a saw guide now for the longer cuts.
@howardbetts15114 жыл бұрын
@@CharlieDIYte Hi Charlie, I don’t have the need to use a circular saw that often in my everyday life but your video and the way you do DIY has helped me, and I have made great progress on an understairs cupboard project! Thanks for the clear explanation on how to do things.
@pollymonopoly88034 жыл бұрын
I find it hilarious that a speed square is a novelty for you. Congrats on the circular saw. Definitely a must have tool. 🇨🇦
@darland38214 жыл бұрын
If you find that hilarious you need to get out more!
@graemeadamson72724 жыл бұрын
Thanks Charlie 👍 I have been debating over the past few weeks (lockdown projects ) whether to buy a circular saw. This has made my mind up ! Off to my local B&Q tomorrow to get one . Hope they've got one left . I'll get a speed square aswell . Thanks again .
@CharlieDIYte4 жыл бұрын
Thanks Graeme. It's been an absolute game changer. Make sure you set the height so that half of the cutting tooth pokes out below the wood. This is key. I would have thrown this tool away if my carpenter mate hadn't shown me how to use it properly. Yes you definitely need the rafters square and it's well worth spending the time to make a saw guide if you're thinking of cutting long lengths. I'm planning a video on that at some point.
@graemeadamson72724 жыл бұрын
@@CharlieDIYte Will do Charlie. Can't wait to start using it .Got a new project all worked out, just got to dig the wood out of the garage to do it ha ha.
@patrickward163 Жыл бұрын
I have bought a Ryobi 18v circular saw, it's the CCS-1801/D which happens to be the old blue saw. The tool itself is compatible with the newer One+ Lithium batteries
@Ffsdevgj5 жыл бұрын
Awesome video! Thank you so much for making and posting this, I think I’ll get one later on...
@blakehunsicker94585 жыл бұрын
Great review, thanks for going into such detail.
@CharlieDIYte5 жыл бұрын
You're welcome Blake. Thanks for the comment!
@barry-cq4xg5 жыл бұрын
nice video, no padding just straight information
@CharlieDIYte5 жыл бұрын
Thanks. With each new video I try to put as little padding in as possible, so I appreciate that!
@chrisnaya11205 жыл бұрын
An excellent 1-2-3 guide thanks. I feel i know everything i need to know so that i can make the most of mine. Cheers.
@rayj71464 жыл бұрын
Thanks for the video. I decided to buy the Ryobi saw because of this video
@CharlieDIYte4 жыл бұрын
How are you getting on with it? I still love mine!
@rayj71464 жыл бұрын
@@CharlieDIYte its a great bit of kit . Saves me going to B&Q to get timber cut to size. Thanks again for the video. I bought the Ryobi mulit tool as well with the variable angled head which is really good.If you plan to buy one or have one I would love to see the video :-)
@mikes68446 жыл бұрын
Super vid Charlie, if you can pick up a sheet of Kingspan/Celotex insulation board it makes a perfect flat surface to saw on (works on the floor as well). It does not matter if you accidentally cut into it. Sometimes builders leave good pieces in skips. It’s very light to move around and store. Also, only an observation, just be careful of kick back when moving your rafter guide from one side to the other. Even battery powered saws can have a nasty sting in its tail. I have a large Makita track saw and I’ve learnt the hard way, limbs and fingers still in place. Look forward to the next in the series. Regards. Mike
@CharlieDIYte6 жыл бұрын
Thanks Mike. The celotex is a great idea, and I've got plenty of it knocking about in the garage. I'm going to install the parf guide system on the work table soon, so I'll have to use 6mm MDF or ply with that.
@hdsenevi2 жыл бұрын
Thanks for the video Charlie. Very informative and helped me a lot in my DIY
@CharlieDIYte2 жыл бұрын
You're get welcome. There's this one too kzfaq.info/get/bejne/o9yTg9iG38XRZ2g.html
@AccountantDoesDIY Жыл бұрын
One of the first tools I bought, together with mitre saw. Got the Evolution pair. Cracking kit, reasonably priced and British made. I was also a little slow in realising the importance of setting the blade so that the tip of the teeth only just penetrates the thickness of the wood. Game changer after realising that.
@CharlieDIYte Жыл бұрын
Thanks Chris. Yep, great value for money the Evolution stuff. 👌
@w62634 жыл бұрын
Got one for a birthday present! Well chuffed!
@kenn19362 жыл бұрын
Well Charlie, I think your channel is ace!! I don't think it is too small. The work you have done is awesome!! I have learnt a lot from watching you!! I hope you start getting endorsements and tools to try out for free!!
@cam-bo115 жыл бұрын
Another great tutorial for us DIY newbies. Thank you. 👍👍👍
@knightbeat Жыл бұрын
I bought a "Guild 160mm Circular Saw - 1200W" from Argos last year when I did not have a clear understanding of choosing tools. Then I didn't really know much about B&Q, Screwfix, Toolstation etc. Now, I have many questions such as "if other Circular saws are better? If better, how? What's the difference between Guild and something like Ryobi/Erbauer when it comes to cutting and the feel on the hands/wrists due to vibration levels" etc.
@abner20bushi5 жыл бұрын
Know that you have a fan in Brazil :) I'm learning a lot with you. Thanks!
@ianbrown_Күн бұрын
Great review as always
@MartiA19736 жыл бұрын
Fast, accurate and useful...and that was just the video. I have two of these (battery and mains) which I rarely used until I got the fence (4 quid from fleabay if yours is missing). Quality blades in a cheap saw will work better than the reverse. Blade depth tip was gold.
@CharlieDIYte6 жыл бұрын
Thanks mate!! Yep, even with the fence the blade wanders all over the place if you don't get the blade depth right. Thanks for the comment, much appreciated!
@jimbo26295 жыл бұрын
I bought mine on eBay from America and saved a lot of money. Also non Ryobi but compatible batteries are also a lot cheaper. The bigger batteries are heavy so bigger capacity has to be balanced against weight with hand held tools.
@juneritchie24984 жыл бұрын
How timely to find your channel today. I was given a very old well-worn and heavy wired saw that I didn't want to use, or I should say, I was afraid to use. So, I ventured out and got a small battery powered Ryobi just two days ago! Your practical approach to using circular saws has eased my apprehension, and I look forward to testing it out and building a new door for my pump shed this week - a new adventure for this senior citizen!
@CharlieDIYte4 жыл бұрын
You're welcome June. The critical thing is you must get the height of the blade right, otherwise it will wanderer all over the place. You want half of the tooth on the blade poking out below the sheet you're cutting. Good luck - it's a super tool, you'll love it!
@juneritchie24984 жыл бұрын
@@CharlieDIYte Got it! Thanks for the reminder/reinforcement.
@juneritchie24984 жыл бұрын
@@CharlieDIYte A quick update. I have been enjoying the circular saw and finally had a chance to get the door for my pump shed done. I am pleased with the way it looks and functions. Still watching your videos and learning loads! Best to you.
@robru4 жыл бұрын
Really useful to know how to use the circular saw properly, particularly the tip about raising the height of the blade. I couldn’t get on with mine and its been left unused in the garage for years. I’ll be using it in the future now!
@CharlieDIYte4 жыл бұрын
I was the same mate. The height of the blade is crucial.
@wheatcroft96 жыл бұрын
Hi Charlie, another great video with some very useful tips on getting the best out of your tools. As a keen diyer, love the Ryobi one plus kit. I have been adding to my collection over the last couple of years. Had the circular saw last Christmas but not had chance to use it much, watching the video gave me some great ideas though.
@gregghernandez27144 жыл бұрын
Hello there. Great video. I don't want to sound like the health Police or anything, but please wear a mask when cutting MDF. What is holding the particles of wood pulp together is some very toxic glue. Once you allow that stuff into the air, it can get in your lungs which is never good. A mask is a good idea, especially in an enclosed area. Regular plywood is not nearly as dangerous. Ryobi sure is making a name for itself lately. It is the go to tool for DIYers and many professionals for that matter. I have a corded and a cordless circular saw, and I just love them both. Next I plan to get their drill and driver kit which is very reasonably priced. Great presentation, thank you.
@grahamwatson67406 жыл бұрын
Great video, now I know what I've been doing wrong with mine. Thanks
@CharlieDIYte6 жыл бұрын
Graham Watson Thanks Graham. Blade too low? So easy to do. You'd think you'd want as much blade going in as possible!
@hemangipai95472 жыл бұрын
Very helpful! Learned so much!
@CharlieDIYte2 жыл бұрын
Thanks. There's an update here kzfaq.info/get/bejne/o9yTg9iG38XRZ2g.html although for ripping down full sheets of MDF you really need a plunge saw with its better track. Still love my circular saw though.
@SpeedDemon3654 жыл бұрын
Hi Charlie, I have this saw and its BRILLIANT. :).
@alizcool14 жыл бұрын
Come on Ryobi sponsor this guy!!
@CharlieDIYte4 жыл бұрын
Ha! Funnily enough their PR got in touch with me recently ("about time" was my reply, I think :)) although I've slightly non-plussed them out as I've asked if I can interview them to really get under the skin of the brand, as I think that'd be more interesting than just trying to plug their tools on my channel.
@timwalters53553 жыл бұрын
Those Stanley work horses have a notch which can be used for cutting, just line the cut above the notches..
@CharlieDIYte3 жыл бұрын
I'd never thought of using the notch for that 👍🏻
@aleksanderrihtar40976 жыл бұрын
I have a circular saw, but I never really knew how to use it correctly. Thanks to you I now do! I really like how you explained evrything! I subscribed and liked!
@alfredo53145 жыл бұрын
No you don't. Watch a safety video instead before you injure yourself: kzfaq.info/get/bejne/n7iHgsuizN-tpZ8.html
@markdinmore97664 жыл бұрын
Hi Charlie i have the same work bench it’s brilliant i need to make guide for my circular saw great video
@CharlieDIYte4 жыл бұрын
Thanks! Yes, I don't know what I'd do without it. I'm going to do another circular saw guide video at some point but don't hold your breath! You want to check out the KZfaq videos of the guides that have a rail on both sides. The downside of mine is that it will wander if you're not concentrating and applying constant pressure to keep it against the rail.
@brianoneill3506 жыл бұрын
Yes I have used an angle grinder. I have 2 circular saws one battery one corded in the shed. Both sit there. I would never buy one of these things again. Old tech. Track saw even though a few bob more different class of machine. That's my take on these things. Love this channel really good
@davewilliams3556 жыл бұрын
I agree Charlie, however its a little expensive, i tried to buy one at BnQ and it was 60 quid, however when i got to the till i found out it didn’t have a battery or a charger and they were 100 quid for them so no chance, god a corded one and it was 29 quid, works brill.
@CharlieDIYte6 жыл бұрын
Dave Williams Nice work! Got to say, it's become my most used tool dice I bought it!
@Kamel4195 жыл бұрын
I also use a corded one, I don't have any problems with the cord but I could see how a cordless one would be convenient.
@DeanneMariaCreates6 жыл бұрын
Hi Charlie, as always great video and nice to see you using your circular saw. Always daunting when 1st using, it soon becomes your favourite tool when used properly. I too thought the same about the black measuring guide initially; thought it was just rubbish; but hey ho, I was too quick to blame my tools and found the guide to be very useful. I have been using a rafters square for a very long time; actually I do not know many carpenters/joiners who do not. Keep up the videos; it is great to be able to watch a DIY video which provides metric dimensions.
@johnmchugh991410 ай бұрын
Outstanding video for DIY enthusiasts 👌💪🙏 This was exactly what I was looking for. Thank you.
@CharlieDIYte9 ай бұрын
Thanks mate. Glad you found it useful. There's this one too kzfaq.info/get/bejne/o9yTg9iG38XRZ2g.htmlsi=LcrwDmYhCSpsSBEC if you're thinking of making a guide but to be honest, for ripping down full length sheets, a polling saw and metal track are the best option. Love my circular saw though.
@johnfithian-franks82766 жыл бұрын
Hi Charlie, I bought a corded track saw from LIDE here in the UK, it cost £39:00 and you get a factory made track that is straight and only about 2mm thick and that is good as it means I can cut thicker wood and because it is made of aluminum it is light as well.
@zedman4426 жыл бұрын
Nice video Charlie. One thing to note about circular saws especially for newbies is the riving knife, that ryobi does not have one. There are pros and cons, if you are experienced and can handle kickback then a saw without a riving knife is fine. Newbie s may benefit from one with the safety feature. Personally for me the riving knife gets in the way so have removed it from many saws.