Civic EG Budget K SWAP Part 1

No video

Civic EG Budget K SWAP Part 1

Рет қаралды 303,174

Күн бұрын

By Brian Gillespie VA Technical Editor
Is it possible to do a K swap into an EG Civic for about the same cost as a B series? We will try to do with our Projectcarpalooza Budget K Civic!
2004 Honda Accord K24A4 engine
2004 Honda Accord 5-speed transmission
2005 Honda Accord ECU for manual transmission
KTuner reflash
2004 Honda Element engine wiring harness for manual transmission
Hasport ECU sub harness
Hasport EGK4 mount kit
Hasport axles for K-swap
DC Sports K-swap header
2006 Civic Si intermediate shaft
2004 Honda Accord alternator
RSX idler pulley
serpentine belt
AEM fuel pressure regulator
2004 Accord flywheel
2004 Accord clutch
parts for intake and air filter
upper radiator hose
lower radiator hose
heater hoses
Rywire knock sensor connector
other misc wire and connectors
IAS
clutch slave cylinder and lines
2005 Honda Accord shifter and cables
02 sensor
brake line for clutch master
Hasport radiator hose adapter
fuel fittings and hose

Пікірлер: 305

@dsturbovq 8 жыл бұрын

Yes finally a video that explains how to do it on a budget

@jasonsimpson4805 6 жыл бұрын

Finally, a skilled group doing it on a real world budget! Keep it up guys!!

@teamjonetsu6933 8 жыл бұрын

I currently own a 2006 Cobalt SS, I love this car but I am a Honda lover at heart. I will religiously follow this series and if I see that it can be truly done on a "Budget" I will finally live my dream of a K Swapped EK Coupe. Good Luck! -Matt

@sigmaprojects 6 жыл бұрын

I know the interior falls apart, but I remember these being pretty awesome on some tracks. Is your S/C or the Turbo model?

@wewe000355619 6 жыл бұрын

I have a 2010 cobalt ss . It's the turbo model. And I'm building a rsx. Cobalt is cheaper because it's already turbo . But k series can make more power

@PedroHernandez-pi8ts 5 жыл бұрын

I have everything to do k swap on my civic I got everything from a 05 accord and i got ecu.I just neet harness conections to it where can I get them do guys have them already maid?? All I need is harness and ecu

@shmuelcohen4896 5 жыл бұрын

that 2.0 turbo ecotec motor is a beast.. they still use it in cadillacs and camaros till this day.

@jjelgallodeoro7402 5 жыл бұрын

That's what I want also

@treydaypnw 6 жыл бұрын

Finally a youtube channel dedicated to the geniuses at Honda, and at Hasport!

@musshwins412 8 жыл бұрын

cool video. those k24a4 have a very low compression. you can turbo it and get close to 500 whp. I swapped a jdm k20a type r into my ep3. im very pleased with the end result.

@thevideofuzz8584 8 жыл бұрын

You guys are one of the first I know of that's doing a project video like this for a k series, definitely interesting. I've always wanted to do this swap in my em2 but with the down time, all the hours of work and money involved it's not practical for someone like me with one vehicle. I'd rather just spend 3 grand on a car with the k series or just get the accord with the v6. Still very cool to watch this happen. Most people who do this swap are not very clear on everything needed or don't want to help at all.

@VTECAcademy 8 жыл бұрын

We hope to show people it's possible to go K series for less than the usual swap by thinking outside of the box.

@BlueRice 8 жыл бұрын

do you guys have a shop that service k-swap?

@alexgavieres8293 8 жыл бұрын

+VTEC Academy This is very cool! But yeah, we're at the point now where the Accord can be purchased for about $3k. I would love to see someone do a 2003 5 speed k24a4 accord coupe project. Such a sweet spot of cable throttle K24 and still just barely under 3000 lbs. also a good platform to take advantage of large 17" rubber.

@VTECAcademy 8 жыл бұрын

No, sorry we do not.

@VTECAcademy 8 жыл бұрын

That could be fun!

@bobbyarmijo3307 7 жыл бұрын

Mr.Gillespie still looking good buddy, good to see you still sporting that H badge! Much love and respect!! 👊👍✌

@BrianGillespie_brianathasport 7 жыл бұрын

Thanks!

@davidfoley6402 7 жыл бұрын

Brian Gillespie, you showed up in my KZfaq feed! I recognized you before even reading the title. Great video!

@BrianGillespie_brianathasport 7 жыл бұрын

Hey David, how's BMW life?

@davidfoley6402 7 жыл бұрын

I just sold 2/3 of my collection. [Kept the '98 M3] Bought a '98 CRV. At the salvage yard, looking for a new engine.

@MLFranklin 6 жыл бұрын

This is such a cool channel. It's very educational. I like that you help us save money and share all of your tricks to do that.

@MORC 6 жыл бұрын

Great video, this series should help with my budget build.

@VTECAcademy 6 жыл бұрын

king15 that’s what we are hoping for! Check the posts on vtecacademy.com for more info.

@Gemi4900 8 жыл бұрын

K24a2/k20a2/z1, rsx 6speed trans , kpro would of been almost 3k itself lol

@Lambo6fo 7 жыл бұрын

This guy's knowledge blows my mind

@harryazzole7814 8 жыл бұрын

Been looking for a professional and in depth build log like this one for a long time now. Thanks for sharing!

@harryazzole7814 8 жыл бұрын

By the way, how different would an swap into an EK be?

@BrianGillespie_brianathasport 7 жыл бұрын

The main thing is different mount kit and the addition of a subframe from an EG or DC2. The subframe swap helps locate the engine in a better position.

@michaelashbrook3195 7 жыл бұрын

Cristian Lara hybrid racing do a mount kit for the ek swap that doesnt require an eg subframe

@BrianGillespie_brianathasport 7 жыл бұрын

Hasport Performance also makes a mount kit that doesn't require the use of an EK subframe, but not for the K24 engine and trans. The Hybrid racing mount kit doesn't work with the K24 trans. The stock EK subframe makes the engine sit about 2 inches further forward, so if you use a K24 the engine hangs really low to clear the hood.

@kedaotuning 7 жыл бұрын

Brian Gillespie correct me if im wrong but if u dont used the EG subframe it leave the axels in a wrong angle causing to brake easy while drag racing.

@RTCLR123 7 жыл бұрын

This man is legend, not that Dave dude from speed academy, pain in the ass...

@Loodawg 7 жыл бұрын

Enough with the K And B swaps let's start working on making the J easier

@connororeilly6261 6 жыл бұрын

SoCal Ek-j j series are. garbage compared to similar engines.. theyre just simply slow and heavy

@notone4029 6 жыл бұрын

Louie S Fuck the J series!! Heavy ass awkward motor . Plus who honestly wants a huge hole in their nice hood with mammoth engine poking out looking obnoxious!!! Cops pull me over shit!!

@benjamming2680 4 жыл бұрын

They were habitually over weight like the H series, once the K series rolled out H was done. The J series is just a repeat of that lesson.

@horayman 7 жыл бұрын

Speed Academy brought me here.

@VTECAcademy 7 жыл бұрын

Boog Ste Lici Awesome! Pete and Dave rock. Thanks for coming over.

@broganhogan3469 8 жыл бұрын

Great video, Mr Gillespie. I have an old issue of Import Tuner(I think?) with a black EF hatch project you guys did doing a B16A2 swap How-To for cheap, and I'm pretty sure it's you in the pictures! Very cool.

@BrianGillespie_brianathasport 8 жыл бұрын

Yeah, that was me. Did about 20 of those over the years starting with Sport Compact Car in the 90s.

@monutz4u 8 жыл бұрын

I can't wait to see the finished product.

@flat4103 7 жыл бұрын

Love this series, doing a k swap myself! Thanks so much for providing this guide and for the inspiration!

@Ninjatuuna 6 жыл бұрын

i'm currently in the process of this swap into my ek on my channel, thanks for the info brian

@PedroHernandez-pi8ts 5 жыл бұрын

I got everything from 05 accord with k24A8 to do k swap on my civic I got everything I got the ecu from the same accord 5peed I just need harness o conections to ecu

@RobiB95 5 жыл бұрын

done the swap?

@mopar_randy4952 3 жыл бұрын

Just use your grandma's engine, ultimate money saver.

@afrikan1641 8 жыл бұрын

I assume this will work with a crx, with slight differences. This is awesome.

@HONDAMeskin123 2 жыл бұрын

Man these prices were good lol I’m planning on doing a k swap and it’s way more expensive in 2022 haha

@VTECAcademy 2 жыл бұрын

It can still be done. Just need to be resourceful on finding everything.

@pleasetakeasip4556 8 жыл бұрын

B series is always going to be the best! Gsr for life!

@HiFiInsider Жыл бұрын

I have EJ1 and I'm waiting for electric modifications to get more affordable to go EV.

@kaystation3074 4 жыл бұрын

I just realized this is the guy from Pinks with the CRX.

@builtbyme4422 8 жыл бұрын

MR. HASSPORT FOR THE WIN.

@skillzorz101 5 ай бұрын

The Wordpress companion page for this project doesn't seem to be working for me on my PC or phone.

@OneDanielSann 5 жыл бұрын

I wish I have budget to do a k swap.. but b20v is pretty good for now.. :/

@VTECAcademy 5 жыл бұрын

DanielSunn oh yeah, a B20 VTEC is a good time!

@RHDRich206 8 жыл бұрын

Weren't you on the show "Pinks" with a boosted CRX?

@VTECAcademy 8 жыл бұрын

Oh yeahhh!

@unknown1creature 8 жыл бұрын

I knew I recognized you from somewhere!

@MYTHkaz876 5 жыл бұрын

that crx was a beast! "if i had known i'd have built a faster car"...six weeks later= *beats the 9sec VW* -BEASTMODE

@treydaypnw 6 жыл бұрын

Great video Brian, hey can you try the K20C or the K20A in a CB7 Accord 90-93? Thanks!

@TheAndrewscape 8 жыл бұрын

Nice! I have a 2000 si with a k20z1 there great engines

@IaintTrynaGoOutLikeBIGnPAC 8 жыл бұрын

They're*

@TheAndrewscape 8 жыл бұрын

+Spoonzaza ok.

@TheAndrewscape 8 жыл бұрын

+Spoonzaza this is isn't english 101

@pleasetakeasip4556 8 жыл бұрын

+Chad W who knows maybe he understands English isn't his first language and he's helping him learn it? I mean there's different ways to take it, but it can't hurt for him to learn

@chadw4638 8 жыл бұрын

Stuntihn MX then dont post videos on a language you dont really understand.

@kcarde75 7 жыл бұрын

that would be great if you can sell that as a complete swap

@imbeautiful9305 8 жыл бұрын

freakin awsome, love my k24 si, would love to one build a swapped eg with it

@imbeautiful9305 8 жыл бұрын

one day*

@kylebradley8963 5 жыл бұрын

I wish I had the know how on working on cars and shit. I grew up with the cosmetic side of things. I plan on having a k swapped 5th gen Prelude or what hatch but I don’t even know where to start

@VTECAcademy 5 жыл бұрын

kyle bradley Start with the parts list here to get an idea of the budget. vtec.academy/category/projectcarpalooza/project-budget-k-civic/ Also hit k20a.org

@nateandsilentrob 8 жыл бұрын

Liked and subscribed. I'm really wanting a k but if I threw $7k into a B I'm thinking I could do more.

@stormsii2961 4 жыл бұрын

Bandito NA K series > Boosted B series. No boost is a safer platform, sidewalls are too thin on Honda motors, they’re a ticking bomb. They’ll go out eventually. K series makes good power and They’re better to NA

@dyllenger 8 жыл бұрын

that's my dream build a eg hatch with k 20 or k24 but with other stuff done .. not really a budget build

@XSTAYUPX 8 жыл бұрын

lmao. visit a track atleast one day

@dyllenger 8 жыл бұрын

XSTAYUPX what lmao

@VTECAcademy 8 жыл бұрын

Doing builds in stages can help make things easier.

@Imaboss8ball 8 жыл бұрын

it is a budget build if you don't use hasport parts lol

@BigSer 8 жыл бұрын

on ebay there is knock off mounts that im willing to give a try for $200. dont be fooled, there is no such thing as BUDGET when doing a build. they arent also taking into consideration how much a clean eg or ek hatch cost. also when you are done doing your research and realize that you should go k24a2, you better add on another thousand. take it from the guy that started out going all motor to turbo to $15k civic build. save your money buy rsx thats already done or save for s2k.

@neflo8090 7 жыл бұрын

Man I enjoy your videos! Thanks for sharing. Based on your knowledge and expertise if I purchase the k-tuned level 4 swap package to install a k20a2 on a 2000 civic ex coupe (ej8) how hard is it for the wiring in to be install...or is it a plug and play type of deal with the k tuned adapters package. I appreciate your help!

@VTECAcademy 7 жыл бұрын

Nahun Flores it's pretty easy when you take it step by step. The great thing about the K-Tuned stuff is the customer support that comes along with it. They can help you with advice on any hurdles that may come up with your swap.

@neflo8090 7 жыл бұрын

VTEC Academy thank you!

@AmericanRustWorker3369 4 жыл бұрын

Man I wish/hope they have something for the Honda Crx’s I have a SiR (non vetch)and I’m trying to figure out what all I have to do to either turbo it or what I can and can’t do just to make it fast

@DICE2111 6 жыл бұрын

Let me tell you you guys are on point and detail by detail I'm actually working on a k20a2 tyap s with z1 transmission on my ek I'm using 05 06 engine harness and 05 06 ktuner I need help on the c-101 pinout need to know what do I need to relocate wires?? need help

@VTECAcademy 6 жыл бұрын

Email Brian at briang.vtec.academy@gmail.com We dealt with this on the build we did with Speed Academy.

@DICE2111 6 жыл бұрын

Thank you so much I so appreciate it. So its briang.vtec.academy@gmail.com

@zerocool2727 8 жыл бұрын

good engine

@jumexsuave501 6 жыл бұрын

Thank you for the info brotha

@brettyh1 8 жыл бұрын

Seems like you're trying to reinvent the wheel here. A K20A2 full swap can be had for the same cost as a B18C from the start and comes with the most desirable parts as far as swapping into an EG chassis. Consider that you're typically upgrading to aftermarket parts to get a K to work properly in the EG. If the B series owner decided to do the same upgrades (mounts, header, fuel system, axles, clutch, programmable ECU, etc) which cost similar to the K parts, is the B owner really saving money?

@VTECAcademy 8 жыл бұрын

This swap is being done for a B series budget to show people going K series isn't that cost prohibitive anymore

@Pigeonbutter8790 7 жыл бұрын

A J swap would be interesting

@elnismo7014 5 жыл бұрын

Thanks for all videos I’m new to this k swap learn a lot can I used a 05 06 rsx type s ecu stock with oem key and Immobilizer on race harness for my sand rail can u make a race harness thanks

@markcivic1737 Жыл бұрын

Where'd you guys get the ecu flashed? All I can ever find the the kit for sale but obviously the OBD from a 2000s accord won't work on a non existent OBD diagnostic port on an EG.

@ashmars_ 8 жыл бұрын

Now thats cheap. Its 10k for just the engine in my country

@worldhello1234 7 жыл бұрын

What? You buy used engines of the biggest engine manufacturer in the word for 10K. Where do you live? North Korea? How about importing one for less?

@X11CHASE 5 жыл бұрын

10k USD equivalent..? I call BULLSHIT 😂

@EGK20 5 жыл бұрын

I believe that engine price came from JDM k20a FD2 type R

@MegaJailbreaker1 5 жыл бұрын

2:10 Im having trouble with getting power to the ecu. I have a 03 harness with 03 accord ktuner ecu. And im using a ktuned conversion harness. Do i need to repin stuff too?

@bladimiratienza4501 4 жыл бұрын

Bought a 1994 civic hatch shell planning on doing a k swap which would be the cheapest way to do ? The car was originally an automatic transmission .. keeping it budget build

@luisjaramillo5771 7 жыл бұрын

WHATTTTTTTTTTTTTTTTTT so you need to tell me i dont need to buy k tune i can get this done by using oem parts ???????

@daqfr Жыл бұрын

I can’t get much mounts here in South Africa, either they’re too expensive or unavailable. Could a k swap be done with fabricated mounts?

@austin4046 2 жыл бұрын

I used the element harness, and i re-pinned it mirror image. Am i set to plug it straight into the conversion harness? To be clear, this isn't hasport ktuner conversion harness, this is the regular ebay conversion harness. I am using ktuner.

@KillaCiViC1181 2 жыл бұрын

What axles are you using with the 06 intermediate shaft? They look like EP3 or Base RSX axles, but not specified in your parts list.

@VTECAcademy 2 жыл бұрын

We used HP-EGKAX from Hasport because the RSX left axle is too short. They're currently on back order, but if you call Hasport during normal business hours they can tell you what your options are.

@KillaCiViC1181 2 жыл бұрын

@@VTECAcademy good info. Thanks. I've snagged an ILX 6 speed, and I assume the dimensions will still be about the same.

@alexorta1930 8 жыл бұрын

You guys are awesome you guys explain a lot just had a question if it was possible to be answered what if I had entire rsx haves hail damage and mechanically works perfectly fine and wanted to swap it into a 98 Acura Integra what what I need to take out of the RSX to make it happen

@VTECAcademy 8 жыл бұрын

Once part two is completed we will have a post on vtecacademy.com with all the parts listed for this swap and you can use that as a guide.

@jaredm9984 6 жыл бұрын

how was the hasport conversion harness modified to work with the element engine harness? where can I get some more information on how this was done?

@lazygamer9751 Ай бұрын

If I get a 05 accord ecu,engine,trans, and engine harness all matching. Will I still need to make changes to the accord harness or can I just plug everything in??

@IamGabrielVazquez 7 жыл бұрын

hybrid racing has a lot of parts for K swapping

@justdoit6783 7 жыл бұрын

hey thank for your feed back I watch your video all the time! when you say adapter harness you mean the conversion harness from the ecu to the car harness I have the stock ecu with stock harness and I will need a separate immobilizer right

@BrianGillespie_brianathasport 7 жыл бұрын

The immobilizer can be shut off if you are using a K-Pro or KTuner. If not then you will need an immobilizer and wiring.

@PhantomEG 2 ай бұрын

Where can we buy the hasport adapter harness for this exact swap in an eg?

@cheekanuble 5 жыл бұрын

can all these parts be used on a EK chassis??

@SLExELIJAH 4 жыл бұрын

2:20 i dont understand what you mean by just hooking up the alternator plug straight to the harness how did you do it

@Sandman206 7 жыл бұрын

most of these comments/questions are hilarious...you guys really want all your questions answered? Go to K20a.org...

@robertandrews1043 8 жыл бұрын

a question of VTEC Academy, with this inexpensive build could I be able to stick a K20 head on a k24a4 from an 04 Honda Accord?

@gilbertovenegas9438 8 жыл бұрын

i got a 95 accord I want a seap a 04 tsx engine I have the whole car I wanna know what else do I need to swap the engine to the accord.

@SpoolinB16A 7 жыл бұрын

I'm curious as to the exhaust system you used on this build. I have a K20A type r with the DC header, but for the life of me I can't figure out what to use to bolt to the header???? int has the triangle non-donut gasket and I can't find anything that fits. Anybody has any clues?

@txman951 3 жыл бұрын

Will you be making the video how to convert an Element auto harness to a Manual trans harness?

@VTECAcademy 3 жыл бұрын

I will start with a video on the CRV harness while I search for an Element harness. The conversion information is almost identical.

@txman951 3 жыл бұрын

@@VTECAcademy thanks very much for the quick response. I look forward to the video.

@justdoit6783 6 жыл бұрын

Hi i m doing my k swap on the same car is a budget. My cuestion is wish wheel hub I can use to put the axle and what axle I can use ?

@kimberlygokool5346 6 жыл бұрын

i know this man he was on pinks all out with a crx

@rdias2 4 жыл бұрын

Why cant u use the harness that came with the engine?

@josephwheatley17 7 жыл бұрын

im building a drag car was womdering if i wouod haft to have a key i want to run a push button switch instad of a key

@TheAnon11 5 жыл бұрын

Lawnmower gang

@F1ashP1aya Жыл бұрын

hey hey, what kinda serpentine belt did you use in that case?

@YasselAlvarez33157 4 жыл бұрын

My dream car haha

@marcusaguirre7032 7 жыл бұрын

What do you use the Faro tracker for. we use then all the time where i work just wondering.

@pigeonsil240sx 2 жыл бұрын

neighbor k24 swapped eg but bogs out when you rev up.any common issues you seen?its a tsx k24/kpro harness and i think hondata kpro ecu i think he said from 02-04 rsx base model. after scanning it had o2 codes/coolant temp and i think it said "communication network" as another code

@VTECAcademy 2 жыл бұрын

Is there a check engine light? Almost always if there is a problem like that there is a check engine light.

@angellao9461 2 жыл бұрын

Can i use the stock accord harness or whats the difference from the accord and element harness

@daesyoung 5 жыл бұрын

if one has remade harnesses before.. can i just repin the thing into my dc harness with the k ecu pigtails tho for the ecu ect... ?

@trevormcclure5791 4 жыл бұрын

Why modifications did you make to the e plug

@portable112 6 жыл бұрын

Hello dear people. I wanted to know how much does Type r K20 Engine/trans/ecu cost in USA?

@coyhunsucker1386 6 жыл бұрын

What all engines will k tuner work for ?? I want to get some version of K24 but how do I know the K24 I’m getting has a k tuner or hondata available for it

@Robbr20 7 жыл бұрын

How much do you think it will cost to put my k20z3 outa my 08 civic si into a 93 del sol my 08 runs and drive great but can't have it on the road but everything works but what can use from it

@chrisxx3452 7 жыл бұрын

I am thinking about doing an engine swop for my 1995 Honda Civic HB. It currently has the 1.5 liter Vtec. What engines choices do I have with this car; if it will fit, I would like to install a 2 liter (K20?) and I'd like to stay with the Vtec system if possible/practicable. If it is an option, which is a better block/crank to handle a turbo, the "K" or "B" series? -- Thanks Chris

@BrianGillespie_brianathasport 7 жыл бұрын

Your choices in order of difficulty are B-series, H-series and K-series. Here is a greatly simplified overview. The B can be done with stock mounts, new shift rods, a slightly modified engine harness and new ECU. The H can be done with H-series swap mounts, conversion to cable shift, some chassis mods, a modified engine harness and new ECU. The K-series requires more modifications to the chassis, conversion to cable shifter, wiring adapters, new engine harness, radiator mods, and new ECU. I have left out a lot of the details. We may get to an over view of the process at some point since we have both a K-series and B-series swap here.

@virgiswolf5499 4 жыл бұрын

Isnt it cheaper just to buy a whole accord?

@MartinezRE1 7 жыл бұрын

Can I do a K24 or k20 with automatic transmission on a 2001 Honda Civic LX automatic transmission ???

@pavel1809 8 жыл бұрын

I with to Build my civic ex 2002 under $3000 with a K series swap

@BrianGillespie_brianathasport 8 жыл бұрын

That can probably be done a little easier than the EG build. The 2002 can use a lot of stock parts where the EG had to use swap specific parts.

@h23beltran24 8 жыл бұрын

i wish this guy was my dad

@brianrunyon8533 8 жыл бұрын

➕1

@khalkim3114 3 ай бұрын

can you use the element manual ecu?

@TheSupramental 7 жыл бұрын

Would this also work on a ek hatch? Or would there be different expenses?

@notone4029 6 жыл бұрын

Vtec academy which rad hoses to use for budget minded people?? You weren’t specific

@VTECAcademy 6 жыл бұрын

If you got to the VTEC Academy web page we get more specific with everything. vtec.academy/budget-k-swap/

@792bnz 7 жыл бұрын

I'm in Boston. where can i get a swap done?

@justicebikelife7354 5 жыл бұрын

To use rsx throttle body

@DavidSantos-mf8bl 7 жыл бұрын

i have a 1992 honda civic hatchback shell can i use the k24a4 with a automatic? my budget is $2500

@StreetSpeed904 7 жыл бұрын

Yeah I have a 2003 Element with a stock K24A4 and a 5-speed auto. Works fine. I'm not exactly sure where you'd be able to find the engine and transmission for cheap, but the combo works.

@BrianGillespie_brianathasport 7 жыл бұрын

I haven't tried doing an automatic swap yet. Thats something I'd like to do in the future.

@justicebikelife7354 5 жыл бұрын

Did u use a adapter on the intake manifold ??

@Jamie43210 3 жыл бұрын

Am doing a k24z7 swap and I have a aem ecu can you creat me a base tune to get it running

@VTECAcademy 3 жыл бұрын

I do not have that ECU or a car with that swap to build a base map. Sorry.

@compacto2279 8 жыл бұрын

Will these parts work with a k20a3 swap?

@BrianGillespie_brianathasport 7 жыл бұрын

Yes, unlesss you're using the K20A3 transmission. Then you need a different mount kit like Hasport's EGK2 mount kit.

@themightypancho3249 7 жыл бұрын

How do you make the egr work?

@christianxzowner2958 4 жыл бұрын

Is the l15b7 a fit in there

@thunderclappacks9274 8 жыл бұрын

This motor is a 2.4L correct? Will that fit in a four door 2002 civic dx with no modification? I was looking at the 2.0 L K20s which were about 850 after shipping

@VTECAcademy 8 жыл бұрын

Kind of. You need a mount kit and RSX or 03-05 Civic Si subframe. There are a few tight places like the throttle body is very close to the hood latch support and in the way if you use a CRV K24. It's also best to change the lower radiator hose fitting so it works better too.

@SmackMySmeat 7 жыл бұрын

Putting this swap in with all the same parts in a 94 civic dx coupe would be the same process? And would it also be the same into a 99 civic dx coupe but with different hasport mounts right since it's a ek? Thanks

@VTECAcademy 7 жыл бұрын

alessandro risco yes

@justdoit6783 7 жыл бұрын

Hi I have the same engine for the same car. do I need to change the throttle body harness and ecu

@BrianGillespie_brianathasport 7 жыл бұрын

As long as it is drive by throttle cable, no. The ECU needs to be from the 2005 if you are going to do the KTuner system. You will need an adapter harness though for your car.