HOPE ITS USEFULL!!!! AND HOPE you ALL are well out there!!!!!!!!!

Crazy labour for a little light.Thanks for the video.

Thank you so much for your video. I followed it to the letter today and successfully replaced the passenger door LED in about 45 mins. Great job!

I hope you have more videos on W222. I really enjoy every single one of your videos. They are awesome. You make it look like a piece of cake. Thank you

Man that’s an insane amount of work to replace a light… I think I can live without it…

Thank you so much for this Chris, my w222 turns 3 years old next week and as expect one of the door handle leds has started to turn blue in colour, a sign it's about to go. If it wasn't for this video I wouldn't dream of trying it myself. Once it dies I'll buy all 4 from your site. Thanks again keep the videos coming, looking forward to the facelift video 😁

Brahhh nah fuck that looks like I’m just gonna have a busted door light on my AMG🤦‍♂️

Man i wanted to replace my broken ones but after this....i dunno if its worth it lol geez so painful

I had to change my door lock actuator and this video really helped me out. Thanks

THANK YOU!!! I just bought the light to do this tomorrow and oh my gosh perfect timing lmao you’re the best!

All that hard effort to change a light 😨😨

Wow. Thanks for this video. It saved me a stack.

Good clear instruction, nicely done.

After watching this video I will pray for mines to not die 🙏🏻

I went outside to my 17 CLS 63 expecting to find thoses but i didnt, i was surprised lol. Great videos btw!

Thanks for the video it was help-full I had to do both rear doors.

Great work! This channel need more subs!

GOOD JOB , brother 👏🏿

Hard worker 👏🏼

Good Job! like your videos!

Thank you for the job!

Just noticed one of mine has gone... safe to say I won't be changing it! What a ball ache

Good job bro i like it thnx u

So much work for such a little light

Great video... Thanks... X3 door bulbs gone so will cost £150 a door, not as confident as you so won't be doing it myself but shows just how much labour is involved.

A lot of work to replace that door handle light. But it looks very nice. I have a 2016 E400 W212 fully loaded but does not come with door handle light. Excellent video for those of you have that accessory. 👍

So i figured it out. It's not that hard, but too much to take off. But if you follow the video it's doable. I have to say that the rear doors on a long version with window curtains are more difficult. The hardest part is to take off the cover by trying not to destroy the plastic clips.

all that to change a bulb you would think they would have made it a bit easier

So many work its just crazy

I was thinking of changing this LED myself but having watched this I understand why I should instead pay to people who specialise in MBs. Even more though I wonder if it's even worth having those swanky door handle lights given you have to dissemble half your vehicle and the chances of scratching / breaking clips / messing something up, even by trained people, are real.

Very disappointed. Dismantling the whole door for a finicky light.

Thank you for this video. For me it's a hell no!

Hello Chris. Could you please make some video how to install keyless go system on 2014 w212 which doesn’t have this feature on some w212, thank you so much your videos are perfect to learn!!!

thank you Chris. great instruction. I think i got a problem with my wing mirror on my ML/GLE . They open and close very slow i dont think thats normal i can take a video and send you.

Look like mines going to stay out 🤣🤣🤣

I think I rather just break the other 3🤣🤣

Not even watching it until the end. Way too much work for a bulb replacement 😂

Amazing job. A question please, I removed my door handle and found out that one of my screws got rusted “video 2:19” that two screws can be removed straight out without removing back door panel? Thank you.

Jr garage sent me!

I have 3 lights broken, after seeing that video i hope the last one will broke aswell 😂😂im not gonna do that 3 times, no thank you

Great video. I just noticed that my passenger LED is not working and my drivers side is starting to flicker on C205 2016. Doesn’t look like a hard job. My car is a year out of warranty, going to try see if Mercedes will fix it for free but if they don’t then at least I know I can do it and only spend on parts ( around £15-£30 each ). Thanks for making this video.

Hi I just wanted to know on the rear door do you just take out lock pin grommet all the entire lock pin if so how is it removed do you twist it pull it if so which way kind regards

Very good video, Thank you very much! Questions: 1. You disconnect the battery? 2. How you operate the window without door panel, from the driver door? 3. Star requested after this operation? Thx

Do the gasket seals dry out and become brittle? I wonder if they should be replaced..

wow, what a lot of work to replace one failed LED, thanks for sharing Chris. I have a question, did you test the dead LED ? i mean, was it totally dead ? before putting in the new one, maybe it would make sense to squirt some oil into the contact points so it doesn't get corroded/short...

Thank you for this video. The led light it’s $15 and $250 labor at Mercedes dealership

Help please. My interior light wont come On automatically when I open the door but it comes on manually. What Can I do? Thank you

haha, came to see how this was done as three of mine are out, looks like they're staying that way sadly

I did the above on driver's side of a C400. Wow, it is a nightmare. It took me two hours just to get the old light out of it housing -- no room or reach whatsoever (if not careful you could shatter the window glass. If you ever wanted to settle an account or punish somebody, have them to replace the driver's side handle light of Mercedes.

i guess you are using 2 torx drivers bc the magnet is stronger so you dont lose any screws. PS i was quoted nearly 300 notes so i'll have a go myself

It looked great on my white W205, but 3 yrs later 2 turned purple.. It should have been installed into the handle, maybe into the part you took out first. Would be a few min job. Still wondering if that could be done w an aftermarket part. The engineer who thought this was a great idea should be sentenced to hunt mines with a hammer.

its actually not that bad. i took my time. The first screw in the door does not come all the way out.Just unscrew it till it stops and leave it in, the same with the window screw.. The hard bits were removing the LED with the lock knob still attached , getting the handle back on bc the spring holder had sprung back into the door. and forgetting the window bung so had to remove the panel again. The next one will be easy about 30 mins max. PS can you help the luggage cover on my estate is intermittent ie it doesnt always retract when opening the tailgate

Thank you! This great information. I just replace mine, however i hope you can help on the current issue i have. the leather surrounding my speedometer display is sagging and want to fix it. is it possible to do a video on how to remove the display and the dash part that hangs over the display to repair or re glue the material? any help would be appreciated.

Can you do a cost video with a cost breakdown of all the parts and stuff that you fitted please?

imagine doing that on all 4 doors madness 😅

Omg! That’s a lot of work. I hate see how much the dealer cost. Worse case scenario if I screw it up I can always take it there. Maybe I can do it. I do have have your video I can always replay .... I might try depending on how much? I will let you all know. 😊 thanks

Do you have any issues with your air vent lights? I’ve fitted them on my W213 but sometimes the drivers door ambient light doesn’t switch on.

I was told by the dealer advisor the new Benz don’t have this anymore cause the previous years had a lot of problems so Benz decided to not have them on the new cars anymore, now 1 light went out on mine rear left door handle and the job at the dealership is $600!!! He mentioned the is a lot of labor involved cause as we can see it is a lot of steps just for 1 little light the it might end up going bad again!!! I do take care of my Benz but I’m not crazy to pay that much money for a little light!!! With that money I can pay for rotors and pads in 1 axle!!! So I just wait for the other 3 to go bad and is going to be fine!!! Good luck guys!

Good job 👏 what about the ambient lighting how to change it ? And where to buy the same like it

One of the door handle lights on my S213 has been dead for a while. After seeing this video and realising how complicated it is to replace it, I decided to take the car to a MB dealer and take advantage of the last couple of months of warranty to get this LED replaced. lo and behold, MB dealer smashed my window while trying to replace the door handle LED and I ended up with no car for a few day until they can source a new glass and replace it. So either this replacement is very difficult or MB dealer didn't know what they were doing. So beware that there is a risk involved if you attempt to do this. Overall I am very disappointed with the way MB has designed this, seem stupid that you have to disassemble the whole door to get to the door handle LED.

Hello Guys, I own Mercedes s class w222 and I can’t understand if it has on the mirrors led. Does it has led on mirrors? Also I’ve checked my car now all door handles led are broken Thanks

I wonder if it’s the same for my C300 one them light went out in the back door.

Fuck that!

Just noticed that my driver side looks purplish and rear driver side looks white. Is it starting to fail? Is also happening in reverse order on the passenger side.

Did u play the video backwards while putting the door handle back in place?

I guess my handle lights just gone be out 😳 cause it ain’t gone happen

Crazy, I already have 2 dead, and I am just gona wait untill other 2 will die, not worth the strugle. I hate it. 😒

I tried to do this for my w205 coupe. I couldn't get to the light still to remove it. The one thing I don't understand is why you need to loosen the window. I didn't do that. I cant hold it up with tape on the coupe. Do you actually need to loosen the window to get to the light?

You can find a speaker system in the car w212 bang&olufsen

Is this the only way to replace my light is low on one door

Sir. Quick question. Do you still have the old part ? Can you pop it open ? I want to know if i can replace just the small led not to buy the whole part.

If it doesn’t light up, it’s definitely LED broken, no any fuse related, right? (Mine is driver door broken😢)

Do you need to reset computer after changing them?

Can I install such a light in the door handles on w212?

Thank you for tutorial. Mercedes wtf?

What the fuck !!! I just ordered 4 new lights for my s63 and well they are going back. I am not doing all this for a light that will go out again. I have one left to burn out and it will stay like that! Fuck that

I have one broken, and I’m just waiting for the rest to break so they’re all even 😅

What a fking job for a light

C250 2014 does it comes with those lights? Thx

Wow 2 mins in and I give up, so handle, door card all have to be removed for this pesky led

Wonder how much Mercedes would charge for this job...🙈 I need 3

On a cost/benefit ratio that's a non starter.

Well I have an answer. There About $25 for the part and very similar from rear and front. Now here is the big part. I called the dealer ship. The specs say 3 hours @ $155 labor. I just might want to do it my self. Thanks. I will let you know when or who does it .

Why shouldn’t remove the screws from the handle? I took mines off now I can’t get my handle back on smh 🤦🏽‍♂️

As soon as he said "Now let's go inside, and now we have to remove the door panel", I stopped watching. This is not a job for me. I'll leave it to the pros. Great instructional video though.

How many hours work is it?

Eerrr no thankyou I’m gonna have to pick up extra shifts just for an extra lightbulb ffs 😭😭💀

품번?

Give that a mis . Not taking all that apart for something you don’t really need😂😂😂😂

How do I do with the window on a coupe?

Expensive car ...stupid designers. How about the little front clear cover over bulb pips off. Pull bulb out plug in new.. done..

No way i will change that

Had a quite fir £170 labour from Mercedes to do this

🤦🏽‍♂️🤦🏽‍♂️

These leds are really bad quality.. MB knows this and stopped putting lights there in 2021

Here's a cheap n quick fix. Go to your nearest dollar store & buy a $2 LED penlight keychain to hang off your MB key FOB.

I cud build a car in this time fu_k that

Disgusting stupid design by Mercedes!!

I got 150 for anybody that can do mine for me

i wouldn't do anything replace jus the led light. if its broken then let it be broken. useless light,