What I especially like about this is it’s recorded in one take - no editing. Great skill and confidence.

I’m wrapping my first car now, and your videos are saving my life!

Wow, if vinyl wrapping ever goes out of style, you should become a brain surgeon! Your steady hands and quality technique never ceases to amaze! Thanks for a great video!

That knifeless tape is brilliant I never knew it existed til 30 min's ago

I hope people understand how helpful these videos are. Showing someone how to do something like this and uploading it up youtube is absolutely unreal. As someone that's been doing PPF for two years (not long) I understand how important a video like this is. You go into detail and explain the importance of everything you're doing. I wanna buy some cheap film and practice wrapping small parts of my mazda3 for shits and giggles and these videos are super helpful. Keep it up dude 👍🏽

I like your films because you show even those bad moments when there is glue or other errors under the foil, you show how to fix them and that sometimes you just need to wrap the element from scratch. Good job! Greetings from Poland!

Your tutorial was a breath of fresh air compared to the one I watched previous. You're a natural teacher. You made the 22 minutes easy to follow and watch.

You, sir, are a magician. Watching you work is amazing! I am not going to wrap my car, nor actually even interested in wrap; but I have viewed so many of your videos just because you are so good. I also truly appreciate your unpretentious manner, and your honesty when you make a mistake. Thanks so much for sharing your work.

Helping my son wrap his Miata MX5 and your videos are excellent! Thank you thank you thank you!

That color combination of black and rose gold is my favorite color combo. Very rich looking. Excellent wrap, Christian. What an incredible job on the mirrors. It looks killer.

I have been doing some wrapping now for a while on my Silverado and getting good at it, alot of trial and error and mainly working with 3D Carbon Fiber Black. I find it hard to work with when you a one person diy guy but learning alot and enjoying it. And after watching some of your vids I'm game to follow 💯 alot of knowledge and love what your doing and a BIG THANKS for it all. Would love to see some carbon fiber wraps as I work with and learn some tips and tricks. Hopefully you will. Thanks again appreciate the know how and skill set you possess. Great stuff.

I don’t plan on wrapping anything but I love watching videos like this that make so much sense.

You are one of the only few that have 100% likes and no dislikes. I have been watching a lot of your videos this afternoon. all have been awesome. I've been learning a lot. So for that, I am thankful. Keep up the great informational video's Chris!

Great instructions. I’m a 56 year old grandmother who has just wrapped her wing mirrors on my smart car.

I had no idea that you can do so much with this. Thanks man. Great video, very good instruction. Well done. You ARE A PROFESSIONAL FOR SURE. I would let you wrap my car anytime.

Ck wraps is the only guy that actually helps me with my first experience wrapping thanks bro!

yeah I also have to say I've been rapping bikes and I started watching your channel to get some tips and info and kind of insider you know just watch and see how it's laid and now that I'm doing it by hand and basically working on my own bikes it has been invaluable it has saved me a ton of time I'm using all the ancillary tools knifeless tape all the specialty tools etc and good God it's really really helped you've been a boon to the community thank you

I love your channel. I did my trim on my SUV after watching your video with a really dope looking Chameleon vinyl. Thanks now it feels more like me.

Christian, you are amazing, attention to detail is spot on. I would never attempt to wrap something myself, I can't even get tape to stick properly..

I appreciate your work, couple of things to add, glue specks happen as you slide around on mirror before you apply 1st time, this is usual with avery, glue "rolling" itself especially if you pull over any ridges leaving small dots like, "making a bed" technique (on time smooth hit basicly) is recommended with avery to avoid it. Also, before you cut, let glue sit for 15min, do other mirror in mean time, don't cut right away, same with post heat, do it 30min after apply. Avery is generally great as you know, but need some adjustments due to softness, thickness and easy apply glue. All best!

I like how he is talking like I'm standing right there, it's comforting some how

Your work is something magical to watch

I appreciate u, I definitely tried wrapping the mirror in one piece. I thought it came out ok but it got heated too much. But now I know to look for the seam.

It’s so therapeutic watching you work. I suck at it. But it’s nice to see it work perfectly here. 😂

Now I understand where the cost comes from. Outstanding work, great video.

what a master at work looks like

Great tips... Everything your saying is going to be helpful when I try to wrap my car. Not sure I can achieve them all, like you can. But, I'm going to try now. Thanks.

I've applied decals before on vans but never wraps. I've a mini cooper and I don't like the plastic chrome. Wrapping seems to be the easiest option. Your videos are easy to watch and I'm sure I'll be able to do mine following your instructions. Thanks for the video 👍🏻. I'm sure I'll be watching a few more that you've done.

You are an awesome teacher...I am laying glass in my dreams

Amazing results, thanks a lot for dedicating time to learn us your technique

wow, everyday a school day, great job! 👏

I think it's hilarious how reassuring he is, okay. Great videos dude

It has been used several times and loved.

That's really good! Not sure I could ever get good at it but you make it look easy.

Man...Chris is so good at his craft, I'll even let him wrap my girlfriend up. A holla to CK wraps, from down under!! Keeps it's up my man. It seems u can't put a foot wrong.

Your training videos are excellent! Very detailed and well paced. I learn a lot!!

Men i really appreciate your explanations and stuff here I wrap my car cammo and it was a pain make the cammo fits with the pattern but I made it by myself practicing on my interior but came out really good 🖤 thanks bro

wow that requires a lot of patience. Amazing craft.

I am gonna be wrapping my car these videos are helping me a lot thank you

Thanks Christian for your videos. They are very helpfull and informative. Hope you the best and God bless you brorher.

I don’t even wrap. But these videos are so good i feel like could wrap now lol..Great job!!!

Great video man. Appreciate people like you. Sharing tips an how to’s

easily the most resourceful wrapper on youtube man, love the content! its really helping me out

Honestly love working with Avery

I would have trouble even taping that mirror. You make it look so easy.

Great work! Had my mirrors done at a tint shop....took it off after 2 days due to the edges curling and some other defects....got them and the roof painted later. Guess I'll go to an actual vinyl shop from now on

Love the video you wouldn’t have a video wrapping a Ford Focus RS mirror do you? That would make my day. Tia

respect from Turkey mate.

The Bob Ross of vinyl wrap.

Good workin regards from Colombia

Perfect video for what I was looking for. Thanks for the clear instructions! Just: if i was the owner of the car, i would be nervous about that watch moving that close to my wrapped car

Dude, your videos are so helpful and informative that it gave me the confidence to try my own car. Even if it doesn’t come out perfect, it won’t be because I didn’t have a good teacher! Makes me want to start my own vinyl wrapping business!

Very Informative video! Stretching vinyl has always freaked me out; as you demonstrate, it's best to just take your time. Well done

These double ads are gonna be the end of me

100% Professional.I built nitro model aircraft and covered them for years.It takes a special knack to do it right.So on the initial start,no heat on your vinyl.Slight heat after to activate the adhesive then stretch to the edges.Then a final shot of heat after you smooth everything to seal the edges.I have a Toyota truck that is about to get a restore and can't wait to try this on the interior and exterior. Do I use the same vinyl for both inside and out?

Thank you from all the way up from Morocco

love your work!!! Hope one day i can be as good as you!

Thank you for taking the time and effort to make the videos. So much information and tricks. I just wrapped my large ass f250 hood in carbon fiber and it looks good. Thank you and God bless.

That edge can be from the tooling that consist of two halves. Where that seem is are decided by the designer and you normally want it where it won't be noticed. Sometimes this is not doable due to draft angles and the shape of the part.

Great job Christian! I’m looking forward to seeing the roof wrap. I got a Lexus so I’m really tryna figure out how to work around the moon Roof

I’m going to go through your library to see if you covered it already. If not, can you cover wrapping a difficult mirror base? I’m looking at wanting to wrap the base on 2004-2006 Scion xB only

That's why your best in the biz! Attention to details, Small stuff that counts. Boom that's how u do a flawless mirror!

Did you do the base in one piece? I wrapped the exact mirror but I’m curious to know what the best way to do the base would be

Freaking awesome. Going to try this soon. Thanks for the knowledge and expertise..patience is a virtue..

Dude I'm hooked on your videos my son wants to do this and i support what he wants to do in is life,,, have ever thought of doing training somewhere in the states hmmm like TX hmm lol, great job man

thanks for the video! very in depth and explained all my questions! keep up the good work

Great video really helpful defo given me the push to try it on my own car

Great Job!

Excellent video. I’m curious. How do you deal with single part mirrors without the caps. I’m scratching my head trying to figure out how to termanite the vinyl across an edge. Look at a stock RSX mirror if you get what I’m saying.

Thanks Christian! Any luck ever doing 5th Gen Ram tow mirrors? Love to get your advice!

I watch you do these wraps but still can't believe it. Incredible

Thanks for sharing. I learned something new today. Do you mind share which brand and which material is good for exterior wrap? I am looking for a candy red color for my mirror, door handles.

do you have a video on how to wrap the bottom "stem" part of the mirror?

I love your work man! Keep it like this!

Is there a curing time for wraps? Could you show a video showing how to wrap finished edges under a hood?

So I know this is an older video. But does the seam slightly overlap each other or is a butt joint style where the ends meet at the seam? Awesome video btw your talent and skills are amazing and the amount of time you put in to share and educate us is appreciated beyond the ability to put into words. But thank you for sharing your hard earned skills with us!!

Gracias por compartir videos tan demostrativos

Can you do one on cutting tape. Is it the wire you pull at start . Do you have to cut tape open to access wire

What is the tool you used to tuck in the tight seams in called ?? It was teal and a golf club shape. I've used all the other tools you used except that one. Great vid as usual always helpful and informative

I've gone through so much vinyl trying to do this

very useful video, Thank you sir

Ok so that knife less tape is really cool. Using a razor or any type of knife always made me a little nervous because of the paint.

He made look so easy ! Great technique i was going to wrap my car but i think it will be better to get a professional to do it..😄😂😂

I know this is an old video but has this car been wrapped with the rose gold color? If so, did he do a video on it also? Someone please answer.💖

I did it! But it took me 3 pieces lol. Black Avery so you can't tell at all. This completes a 2-tone white/black Jaguar F-Type. Couldn't have done it without your videos. THANKS CHRIS!!!!

You are my men now 👍👍👍👍

Great job again. Do you have a video where you show the front part around the mirror glass?

Very nice job...

well done very pro,

Very good video. Thanks, man. Will be trying this on my truck. Does it come loose in -30?

How we cleaning or removed old wrap ? Make video for thats part please..

Show, muito bom o seu trampo...Brasil

4:25 Next time you have to tear the plastic off of the tape then pull, if you just yank it , it will always mess up the vinyl

Once you get your auto focus to produce a sharp image, you should turn it off so when you block the camera with your body it doesn't struggle to regain focus on the area of interest. it would make the video easier for me to see what's happening when you point something out to watch out for

Looks really good. How long do you think this will last.

Sometimes the "trim edge, or molding" is so tight to what wrapping can't tuck, or it eventually starts to peel up or shrinking back after a while. Would it be best to remove pieces like this to wrap instead, or any other tricks that you know of that I don't? Thanks for vids, as its nice to see what other ppl do, & what tricks & tips they know that can be passed on... Cheers, A👍🏻👍🏻

He makes it look a lot easier than it actually is. I tried doing it exactly like him. Was able to finish both mirrors in about 3 hours just to see the vinyl curl up from the bottom, instead of the top where he said are the most common failure points. any pointers anyone?

I just purchased a pair of outer mirror shells which are ready for painting. Can I wrap them as they are or will the vinyl only stick to a painted surface? Also, would wrapping them off the car be a better solution than doing it only after they have been fitted?

What vinyl did you use for the mirror there so many on Amazon but i want to get the right one for my mirrors

you are the Best