Clamp less | Simple mind Who knew it could be that easy!?

Рет қаралды 360,852

9 ай бұрын

#plywoodworking #woodworking #howtomake
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking
/ plywoodworkingtipstrick
/ 479435482886643
/ plywoodworking

Пікірлер: 206

@dougfairburn2037 8 ай бұрын

the A.I. voice has to go! 🤐

@daveklein2826 8 ай бұрын

AI sounds good

@MoltenKing992 5 ай бұрын

Maybe they don’t speak English or they’re deaf?

@bijan4727 9 ай бұрын

Hello Sir. EXCELLENT.

@lawrenceogden3736 9 ай бұрын

Brilliant fixture, many thanks for sharing

@siskiyouwoodsmann4279 8 ай бұрын

Gave it a like for the soothing music as well as the gig for repetitive work…neat idea!

@hanspijpers2100 8 ай бұрын

Hi, why do you scribe an entire line before cutting it with a table saw? I presume the fence is straight so you'll only need a starting point at most, or set the fence to the desired distance

@malcolmbacon7892 4 ай бұрын

I'm not an expert but I believe it's done to prevent tear out and give a much better finish , I just put clear tape on mine

@pauldejesus9644 9 ай бұрын

great video thx for posting

@plywoodworking 3 ай бұрын

Thank you

@larrypahl5756 8 ай бұрын

thanx for posting

@plywoodworking 8 ай бұрын

You're welcome

@jjones110669 3 ай бұрын

Great video, James. I always appreciate your content.

@plywoodworking 3 ай бұрын

Thank you very much☺

@charleselkins4546 9 ай бұрын

Nice miters.

@GNU_Linux_for_good 9 ай бұрын

*_well done_*

@d-treseman 8 ай бұрын

great idea!

@plywoodworking 8 ай бұрын

Thank you very much ☺

@TheDublin47 9 ай бұрын

very good

@peethreeorion 8 ай бұрын

Nicely done, and while it could also be used to hold miter joints while glue dries, there's no particular reason to make the jig USING miter joints (especially on the outer joint that was eventually trimmed off.) Go ahead and use butt joints, which will allow you to add a couple of screws or dowels to reinforce it, since the wracking that occurs as you try to pry the jig off after using it will eventually pull that miter apart anyway.

@davidherndon501 8 ай бұрын

Can anyone tell me what the black scribing tool is called? Yes I’m new with wood working trying to learn.

@stingk5295 8 ай бұрын

Awesome Jig!

@plywoodworking 8 ай бұрын

Thank you! Cheers!

@felicadawn62 9 ай бұрын

I never thought of using my miter gauge backwards, but that works! And, it may solve some issues I've had with a very narrow saw surface. Thank you! Nice jig, too!

@plywoodworking 9 ай бұрын

Glad it helped! thank you very much

@davidcurtis5398 9 ай бұрын

Been using my miter gauge backwards for over 50 years.

@pteddie6965 8 ай бұрын

Excellent jig. Thanks for the video.

@plywoodworking 8 ай бұрын

thank you very much 😊👍

@onehandedmaker 8 ай бұрын

Great project and video.

@plywoodworking 8 ай бұрын

Glad you liked it!

@donaldlemoine3032 9 ай бұрын

Now that is a great idea!

@ginogenero7972 9 ай бұрын

Nice work. I will try adding a piece of tape to the thickness of the plywood when clamping and glueing for a slightly more relaxed fit. 👍

@plywoodworking 3 ай бұрын

Great, thank you very much!!

@celpi5887 9 ай бұрын

good ide

@theroofskillsclub 9 ай бұрын

Simple and effective 👍

@wizardmaster6639 9 ай бұрын

I have bought these and other ones, but can never find them when I need them - like on Friday when I was making a large fish tank canopy surroundings thing - and mine are metal too now that I remember them..I also bought the 4 pcs corner holder thingies which I could not find - and I don't have a dog either to claim that he must have ate them -

@victorbunch7725 9 ай бұрын

An exelent vid.

@plywoodworking 8 ай бұрын

Glad you think so!

@law35penn 9 ай бұрын

Wow, I like it. I'm gonna make one for the 2x4s

@plywoodworking 8 ай бұрын

sound great, thank you

@ayobikindewek 3 ай бұрын

Very nice video, great sharing 😊🙏🏼🙏🏼🙏🏼...

@plywoodworking 3 ай бұрын

Thank you so much 🙂

@Uswesi1527 7 ай бұрын

Very ingenious ideas , making the work easier and more accurate. Thanks

@plywoodworking 7 ай бұрын

Glad you like it!

@terryflynn9350 9 ай бұрын

very good simple idea.Almost free to make. A1

@johnwhite110 9 ай бұрын

Great video ... and a great jig. Thank you.

@plywoodworking 9 ай бұрын

You bet thank you very much!!!

@user-el2qz7rl1x 6 ай бұрын

Я в восторге.👍

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@michaellacaria910 9 ай бұрын

Every jig has different values to different people, hence the comments. I see this very worth while if you work with the same thickness the way you do. Thanks for sharing.

@plywoodworking 3 ай бұрын

Agree, i always work with same thickness that why i made this jig

@eddieme2009 9 ай бұрын

Very good

@plywoodworking 8 ай бұрын

Thanks

@geraldinosilva97 9 ай бұрын

Top. Muito bom mesmo 🎉

@plywoodworking 9 ай бұрын

thank you very much!! 😊

@micklatham3425 9 ай бұрын

Very good if you only work with one thickness material. I bought one that's adjustable.and was very cheap too.

@davidelswick9320 9 ай бұрын

What did you get?

@stephencoleman2414 6 ай бұрын

Very good 👍🏼

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@philipquigley 8 ай бұрын

HOW DO I DOWNLad the free plans

@abrahamben-zeev9142 7 ай бұрын

Great idea !!

@plywoodworking 6 ай бұрын

Thank you! Cheers!

@sg9817 9 ай бұрын

Very nice miter jig@4:22. Do you have a video on how to make it? Thanks

@davidcurtis5398 9 ай бұрын

Who needs a video just look at the video part of this...

@ceciliarademeyer4949 9 ай бұрын

I agree I like the mitre jig a lot. …. Any chance that you have one that I just have not found?

@terencegillespie6675 4 ай бұрын

Nice.

@plywoodworking 2 ай бұрын

thank you very much 😊

@witzed1 8 ай бұрын

please tell use what measuring equipment you are using for this video, the miter gauge, the measuring square, etc. Thanks

@plywoodworking 8 ай бұрын

for measuring you can buy in here ban.ggood.vip/XM9U

@jonburkart1318 8 ай бұрын

Is there any way you could rotate the board one more time after each cut?

@johnstone9396 3 ай бұрын

Can never be to square, especially on the backside that your gonna cut off and toss anyway

@emoko2224 8 ай бұрын

Cool jig. What type of square are you using?

@plywoodworking 8 ай бұрын

what square, do you mean black ruler? if yes this is the link ban.ggood.vip/XM9U

@pikifrino 7 ай бұрын

Congratulations!..A very neat job!..Thank you

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@johnstone9396 3 ай бұрын

So should I build one for every different size of wood or should I only use 1 thickness for everything from this day forward? Or should I just buy a cheap corner clamp that works on many different thicknesses of material and has been produced and tested for ever?

@plywoodworking 27 күн бұрын

thank you very much!!

@gaweown 7 ай бұрын

I always follow every video, a lot of new ideas. Thank you so much

@plywoodworking 7 ай бұрын

Thank you very much always support this channel☺🙏

@HeliRy 7 ай бұрын

That’s awesome. I also love you simple yet effective 45 miter jig 👌

@plywoodworking 7 ай бұрын

Wow, thanks!

@user-ye3jt7hv4p 5 ай бұрын

You did it again, my friend! Another great project, thanks for sharing 👍 ❤

@plywoodworking 5 ай бұрын

Thank you so much 😊

@treich1234 4 ай бұрын

Wax the inside of your jig for easy removal....nice work btw :-)

@plywoodworking 4 ай бұрын

Thank you for the tips☺

@david5476 9 ай бұрын

You can use that as a corner spline jig on the table saw if turned upside down

@robertjames-life4768 8 ай бұрын

Seeing one glove I’m feeling like this might actually be Michael Jackson- woodworker! It’s like an Elvis sighting. 😅

@plywoodworking 8 ай бұрын

thank you very much 😊👍

@eatdrinkwineguy 8 ай бұрын

What is the name of the square you use at 0:26?

@plywoodworking 8 ай бұрын

for measuring you can buy in here ban.ggood.vip/XM9U

@stingk5295 8 ай бұрын

I made one, works Great! thanks.

@plywoodworking 3 күн бұрын

thank you very much, i really sorry for late reply!! 🙏

@ayobikindewek 5 ай бұрын

Very ingenious ideas... Thanks, nice sharing video... 😊🙏

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@robertmorris9998 8 ай бұрын

Brilliant. Make for different size wood maybe 2 or 3 and drill a hole for hanging out of the way. 👍

@plywoodworking 3 күн бұрын

thank you very much, i really sorry for late reply!! 🙏

@ramosc3 6 ай бұрын

Love the home made 5:30 mitre gage

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@williamkaiser8490 8 ай бұрын

Cleaver!

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@agagagoghi 8 ай бұрын

Just a doubt, why draw whole lines on the panel and then cut with the table saw?

@plywoodworking 8 ай бұрын

I like that, feel rileks for me like therapy . Maybe for you that waste time

@agagagoghi 8 ай бұрын

🤣@@plywoodworking

@danhermann2603 7 ай бұрын

Good work! My question is: what is the point of making the 45-degree on the outside if it was going to be cut off at the end?

@plywoodworking 7 ай бұрын

make the jig more small and easy for handle

@lagunafishing 6 ай бұрын

This guy always wears one glove!

@plywoodworking 6 ай бұрын

I have accident few year ago cut half my thumb lucky can back normal but sometimes still feel hurt that why i using glove. Now more better i try working without glove again

@lagunafishing 27 күн бұрын

@@plywoodworking Sorry to hear of your accident.

@plywoodworking 26 күн бұрын

Thank you, now i can work without glove but sometimes still feel hurt

@karolapolinsantillan3804 7 ай бұрын

Exelente trabajo amigo quisiera saber dónde puedo descargar las plantillas

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@Bingobongo-vl4ry 3 ай бұрын

Great video, maybe 9 minutes shorter would help a lot.

@plywoodworking 3 ай бұрын

Thank you very much ☺

@dennisfahlstrom7175 8 ай бұрын

Nice jig if your plywood is 18mm or 1.8 cm which equals .70866”. A problem here in the US is we have a wide variety of sheet good thicknesses which each would require separate size jigs.

@plywoodworking 8 ай бұрын

18mm plywood almost same with 3/4 plywood

@robertbelknap3040 4 ай бұрын

I would say make the jig to fit 3/4" stock and use playing or business cards for the 23/32" plywood.

@andyespenan5919 8 ай бұрын

lost me on that jig you used on your table saw. Rockler has a better option

@toughgamer2960 9 ай бұрын

why don't you make it adjustable? it can only work with that specific thickness

@plywoodworking 9 ай бұрын

Good question, before try make this i try with adjustable jig but the size more bigger and sometime not clamp tight that why i change with fix size

@MCsCreations 9 ай бұрын

Brilliant jig, dude! Really well done!!! 😃 Stay safe there with your family! 🖖😊 BTW, you need a mallet! You're going to hurt your hands even more like this. 😬

@plywoodworking 9 ай бұрын

thank you very much, i dont have mallet but i have rubber hammer. one again thank you for the tips

@MCsCreations 9 ай бұрын

@@plywoodworking You should make one. It would be a great video. 😊

@plywoodworking 9 ай бұрын

Thanks for good idea, i will make 1😁

@billcorwin3316 5 ай бұрын

Should never cut plywood by pushing both sides through the saw,❤

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@ErnestvanderMerwe-wb7dw 7 ай бұрын

what are the mesurments please

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@su-mu 4 ай бұрын

9:54

@plywoodworking 27 күн бұрын

thank you very much!!

@lagunafishing 6 ай бұрын

So what's with the glove?

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@jakeqwaninne8502 8 ай бұрын

ya boy , nice, & simple , all i need is a $200.00 mitre gauge, lol, but if i had that i probably wouldn't rely so much on the jig, i like this one ,it looks like an easy, go to forming square ,any jig to keep stuff in square is worth it to me

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@user-py3bh6rl2c 9 ай бұрын

Good . But you can do this in a very easier way.

@daveklein2826 8 ай бұрын

Show us your video

@user-py3bh6rl2c 8 ай бұрын

@@daveklein2826 excuse me l didn't save it . But you can find such videos in KZfaq. Although I like too your manufactured very much .

@tailher1 5 ай бұрын

In ur videos, why isn't your work square with the table when u make a cut?

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@dmxumrrk332 7 ай бұрын

В мире существуют листы фанеры разной толщины. Удивительно, как про это автору ролика ещё никто не сказал.

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@zamSEG 8 ай бұрын

maybe an upgrade to an adjustable width for next future project perhaps. 👍

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@zamSEG 27 күн бұрын

@@plywoodworking it's ok sir. no harm done and just keep it coming.

@cifcig 7 ай бұрын

Easy but complicated

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@garyperrin8172 8 ай бұрын

no sound not good

@plywoodworking 8 ай бұрын

You mean narator voice, i try make all calm and rileks for watching

@davidtomlin8481 9 ай бұрын

You should have made 2. 1 for each end?

@plywoodworking 9 ай бұрын

Yes make 2 that good, precise and hold perfect 👍😁

@daveklein2826 8 ай бұрын

Jeez, what a stupid comment, he was showing you how to make the jig, if you needed to see 2 being made then you are not smart enough for woodworking

@johngalbraith1057 9 ай бұрын

Why not simply save time and start with thicker ply? 🤷🏻‍♂️🤷🏻‍♂️🤷🏻‍♂️

@plywoodworking 9 ай бұрын

Why i using double plywood coz i need flat plywood😗, if i have straight or flat i will use that

@daveklein2826 8 ай бұрын

Why not use up scraps ....think before you speak

@Barmarcbiker 7 ай бұрын

Would have been nice for an introduction to what you were building.

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@rb-ex 5 ай бұрын

seriously? you can use any of a variety of inexpensive miter clamps that will do the same thing on a wide range of thicknesses and hold 8 corners at a time, or you can build this one jig to hold only one corner for one thickness of material. i guess make this jig if you're time is worth next to nothing

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@eddie1330 9 ай бұрын

Why would anyone draw a line on plywood, if your cutting it against a table saw fence? All you need is a pencil mark

@davidcurtis5398 9 ай бұрын

Exactly what I said in my post. Such a waste of time.

@daveklein2826 8 ай бұрын

Your comment is a complete waste if time

@davidcurtis5398 8 ай бұрын

Thank you - now bite me!!!!!@@daveklein2826

@oneyaker 8 ай бұрын

You have a massive uneven gap under the piece as you run it through the saw @2:26. Bad clamping job. That piece was trash.

@plywoodworking 8 ай бұрын

All work for me😅 i made some piece , thank you

@manuelvelez5480 8 ай бұрын

Man that background music is depressing at least

@plywoodworking 8 ай бұрын

Maybe not your taste, but many viewer like the backsound.

@jimgeelan5949 8 ай бұрын

Stop using your hand as a mallet ! You’ll pay for it later in life, believe me

@plywoodworking 8 ай бұрын

Yes many comment like that, thank you for remind me again. I will build mallet now☺

@blinkie7 6 ай бұрын

I wish there were "jig shows" where woodworkers could sell jigs they've made. When I spend hours planning, hours building and then more hours rebuilding after figuring out what I did wrong, I'd rather buy one from someone who already figured it out and made several to sell.

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@vanman3752 3 ай бұрын

Why mark your pieces when you're just going to cut then on the table saw? Seems like a waste of time.

@plywoodworking 3 ай бұрын

Sorry about that,Maybe for tou waste time but for me mark line like therapy. Woodworking make me rilex

@vanman3752 3 ай бұрын

Whatever turns you on but it's still a waste of time. @@plywoodworking

@plywoodworking 3 ай бұрын

Okay no problem😉

@TeamProsperity 9 ай бұрын

Well why didn’t you demonstrate it 😮

@lafamillecarrington 9 ай бұрын

Some nice ideas, but a little slow.

@daveklein2826 8 ай бұрын

Yes you are slow

@jakeqwaninne8502 8 ай бұрын

nothing like cuttin up a bunch a material for drawers and realizing you now a bunch of useless multi angle paralelograms, that sucks,, but with any of these jigs you really need 4, or the free ends of the wood have no support, or at least a couple extra of the same thickness to put under the free ends

@plywoodworking 27 күн бұрын

thank you very much!! sorry for late reply

@geoffb108 4 ай бұрын

Not a bad idea but quite unnecessary. But joining 18 mm plywood is easy anyway. Text to speech is annoying. Just the text is all we need

@plywoodworking 27 күн бұрын

thank you very much!!

@SimonPeters 6 ай бұрын

I assume the AI voice us cheap. It certain,y sounds it and you mess up a useful video by using it. Crummy.

@plywoodworking 6 ай бұрын

Fair enough! thank you

@mikemorgan5015 9 ай бұрын

Don't know why you're marking your workpiece instead of just measuring your fence position, but go with what works for you. That little maneuver at 7:25 is a recipe for disaster. If you wanted to do a kickback demo, that's how you do it. You clamped that 90 degree stuff unnecessarily then did THAT?!! Others with some experience can feel free to chime in. If the blade catches or you sneeze, the stop block you put on there will make binding inevitable. Because the miter gage can can't move perpendicular to the blade, and the work piece can move in any direction but a binding clockwise spin.... well YIKES! NOT GOOD!

@daveklein2826 8 ай бұрын

Please show us your perfect video

@mightyluv 8 ай бұрын

I appreciate the warning; it’s easy for less experienced operators (me) to overlook less obvious dangers when focusing instead on a solid setup and precision cut. I’ll be keeping my eyes open for that now. 👍🏼

@mikemorgan5015 8 ай бұрын

@@mightyluv No worries. Just trying to help you keep all your body parts intact and work efficiently. I'm here to learn too. Keep up the cool videos.

@mikemorgan5015 8 ай бұрын

@@daveklein2826 My comment was constructive in nature. Drafted to help the creator be safer and more efficient. The creator took it that way. Sorry you feel otherwise.

@daveklein2826 8 ай бұрын

Mine was constructive also, show us your perfect video

@71sixpak 7 ай бұрын

I guess your time isn't worth anything. This jig fits just one thickness of plywood. They make clamps that do this and will work with any thickness. Huge waste of time and resources in my opinion.

@plywoodworking 7 ай бұрын

Agree and disagree, i often use 18mm thickness that why make fix thickness, i make with flexible thickness too check this, maybe you need this kzfaq.info/get/bejne/pqqBf5l8yZm5aZs.html

@johngalbraith1057 9 ай бұрын

Totally over engineered and not required!!!

@plywoodworking 9 ай бұрын

Make this difficult on first but after that make your work easier, i have request and comment why corner clamp always using clamp, maybe you can find the problem. That why i made this🙄

@daveklein2826 8 ай бұрын

Johnny show us your better video

@jimcarris3258 8 ай бұрын

Why on earth do people make j=how to videos with no talking????? I cant stand it

@davidcurtis5398 9 ай бұрын

Why do you draw the line all of the way across the wood when all you need is a "tic" mark for the width ( or no mark at all is you know how to use a ruler) with the table saw fence????? Such a wast of time and video.Are you using AI for the narration??? Sounds like it... Interesting and very nice jig you have for cutting the 45 degree corners. I think I will have to make one...Interesting end result but I bought a set of 4 for very little money and the time it takes to make this can be better used. I can not join the Plywood Tips & Tricks group because I don't do Face Book...

@davidelswick9320 9 ай бұрын

What did you get?