This is exactly why I wrench alone...

Tearing out a gas tank that still has the factory red plugs installed. Removing the front & rear suspension of a truck without 1 stonechip on the frame paint job. What a relatable build!

The LS is great but love that you put a big block in it!👍🇺🇸👍🇺🇸

I saw this truck live in Tyler, Texas at Woodys Accessories and Off-road!!! What an amazing ride!!! SHAZAM!!!

that chassis already clean and shiny, someone has done it. lucky to you

No idea what's happening but I'm thoroughly enjoying it

The LED lights conversions are Awesome

Absolutely beautiful truck!

i enjoyed how real this is...coming from a mechanic

They should call this show impact everyday

This truck is sick

This reminds me of Shop class...

Omg love this truck

Dude! You would have to go though this whole truck and check every nut and bolt. lol

Saludo amigos excelente los felicito éxito Dios me los Bendiga

Glasses Trucker Hat Guy needs a reality check.

I try, I mean I really try to watch these videos, but the "personalities" just ruin the build.

I bet those guys at CPP love working with that old guy.

Nice truck

Super nasty sounding buddy did a good job beautiful l truck

Tighten the suspension with it all the way down!!! Then just throw the bearing in with no extra grease

I used LMC metal to restore the bottom 8” of my 70’s cab!

Hi love ur channel

Love these trucks. I have had mine for 27 years and just about finished it's 2nd rebuild. Sure wish this was a better show, don't need all the clowning around. Would much rather see the details about the build than the poor attempt at humor or whatever these guys think this is. I am surprised LMC and CPP go along with this type of BS for their show.

Incredible that in just 5 days it is possible to build a truck like this, congratulations. Greetings from Buenos Aires Argentina (South America).

Congratulations...

Did he just say that he puts the wheel bearing castle nut on hand tight and then backs it off 3 whole turns? Anybody else do it this way? I've always snugged it up, backed it off until it turned freely and then backed it off just enough to fit the cotter pin.

Man, I wish I had known ahead of time! I would’ve entered the contest to win this amazing truck! I love this build!

Why does the front suspension have 50 years of grease & grime on it, yet the frame & rear suspension is so clean you could eat off of it?

What you giving it away WHAT! I never Hear of this ! Put the next one in my driveway

front spring removal sketch level 1000. Sheesh. You could have dropped a motor and wheels on that thing and anyone would have been happy to get it. nice end result though. Love the Gilligans Island remixes lol

These trucks are always given to someone who's a retired doctor or they already have 5 of them.

I have the same truck just for drag racing

You guys do nice builds i would say a perfect build for sure.

coooool

LMC TROCK CHEVROLET 🇺🇸👍GOOD CLASSIC 🗽

1:06:30 Someone please call a real mechanic!

How many times can You watch a gang of assemblers put a mail-order truck together?

I have one it is cool

Cool.

Every deanship I've worked at had dudes with different personalities, but for video purposes, I would think they would tone it done. We had dudes that blew things up to sticking lunch pickles on the ceiling. They are still there. It's not about them but the build. Can I get the front / rear springs for cheap? Seriously!!! But, with any 50 year old vehicle, if you want to drive safe and reliably, you have to go thru everything, including updating the glass fuses in the box and brakes. If you can't be silly once and a while, you'll grow stale. Where are the torque wrenches? Stock springs wanted in Omaha. ASE Master Tech retired.

What road side did you pick these people up

Tell bro to put a face shield on

Did you seriously cut through the wrong beam? Duuude 🤦‍♂️

Can't believe they went through all that work then splashed gasoline all over the place.

what do u have to do to get a chance to win the truck

Oh god.... They let these clones do another build xD

Should have hired Stacey David

Goodshit

Lol no wipers ..until after the build was done ..I've done the same thing

Nice truck. I've got some show ideas that go beyond "build shows" however.

A couple of bolt on parts....riiiight.

I mean I wish I could tear apart a perfectly good $20k tuck for no reason..... Who’s going to relate to this build? No ones going to ever tear down a truck this nice.

how do i get into this giveaway

Why do these guys seem to have no idea of why they are doing this?

What was the last track played during the credits? Anyone know?

They make diamond hole saws🤦

So how much would a build like this cost lol?

How many noticed the left front center cap was wobbly?

Thats my old truck does it have three on the tree?

you can throw all those new parts at my nova

Is that Will Scott?

What color red is that.

Intelligent design practiced builders seem bored at assembly.

i GUESS YOU CAN JUST WASTE TIME WHEN YOU'RE NOT PAYING FOR THE PARTS.

that poor c10.

👍👍👍👏👏👏👏👏👏👏10

Estos tipos juegan más que lo que trabajan,todo lo toman en son de juego y eso si cae mal

The shifter need to change to a shorter one ,,,,,,,

What look is that at 1:34... Just show the real guys that come in and do the work....

When is the next giveaway.

Wheres the wipers

Oh cool. Another one not on MOTD.

Thought you guys were being a little harsh, but after watching, this was poorly executed. it was like high school shop week.

I can’t handle the guy with the glasses and apparent knee problems.. he just rubs me the wrong way.

Should have used an LS.

The clowns are in house .You guys trying to show stupidity is a bonus . The person that wins this truck better have it inspected.

The real "nucklehead" is at 46:46 putting a shiny metal object between the positive and negative posts 🤯 on the battery (brain malfunction???)

Nothing like roadkill or dirt everyday this just lame tattoos and even lamer hosts

So hear this nah, the winner must be present, so if this corona pandemic get worse and they enforce the Travel restrictions.......how am I gonna get my truck😒

Cuanto sale un trabajo de esta clase

Windshield Wipers might help,wtf

I only watched this because it's a c10 build but the show was poorly done. I have a 72 that needs plenty but I would not let these clowns touch my truck.

I know one thing no cheap thin Chinese LMC tin going on my project,

Putting it to getter not know bolts are screw's part Factory Five 33 Hot Rod LS1 How To Build: Rear Axle front clip two....... 32 Ford rear end in action..>! Wondering if 350 engine 409 computer world would hold it..😍🤩🤗

Hacking away on that classic truck like teenagers in shop class. Unbelievable!

Boa tarde rua fasutolo 130 & 213 são Paulo-sp água branca-lapa brasileiro carro 1972 chevy Pu vai amém

Why does it look like they are removing brand new parts? What a waste!

Marijuana

I like the work that you guys do but why do you never ACTUALLY do any engine work..? Is all you guys know how to do just engine swaps..?

Idk I'd drive anything this crew builds. YOU DONT TIGHTEN DOWN SUSPENSION AND STEERING COMPONENTS UNTILL ITS SITTING ON THE GROUND.

What a caustic place to work. I mean I get the jibbing but honestly its a bit much to watch, like just shut your pie holes, have fun and work.

Do a Ford bronco 2

Give it to me

es aquí donde te das cuenta que no todos los que salen en TV son personas con conocimientos, todo parece ser una fiesta y hacen las cosas al ahy se va claro el proyecto no es suyo y echan a perder piezas que se pueden reutilizar pero es la mentalidad mediocre de nada me cuesta rompo todo.

Not enjoyable to watch. Give me Dirt everyday, anyday over this.

My rip husband love.thank🍎🍎🍎

Pos Ryan Manson.

You listened? Why… were people really belly aching about using LS engines?

Kermit the frog?