7:31 the buckets with the clip on the back were introduced in 2012. The Henry bases from 1981 didn’t have the stabiliser on the back, all there was a little anti-tip thing on the bottom of the bucket. Although in 1994, Numatic introduced the stabiliser on the back but that design (and the previous) both didn’t have wheel covers, which were later introduced in 2003. The clip changed slightly to be ever so slightly taller on the Henry’s from 2014 till 2016, until mid 2016 Numatic moulded a parking slot on the stabiliser on the back with two tool slots one on each side. As well as under the vent on the back cutting out a little notch so the end of the parking slot could fit. Then that way the lid could only go on one way unlike the henries from 1981 - 2016. Some Numatics from that era continued that design (NRV200) continued having the older bracket design until 2018. Those type Numatics had 4 tool slots unlike the normal Henry’s which had 2. The Henry in this vid was from 24th week 2006. Which makes it a very early style of Henry with that type of switch bank setup. It’s strange how even after a good clean the motor still sounds like it did before. Using these filter less is NOT a good idea lol.

I’m so happy you finally are using the bags

best recreation of a filthy henry that was used without a filter and a bag

I think you need to tap the fan casing off on this

Great video mate

I liked your Nuvac vid so much I got one

Those henry vacuums are really good vacuum I tried one at England and Ireland and it was a really good quality vacuum. They are good vacuums and I think they had them since the earlier years they have them now but I think they are really good vacuums powerful long lasting suction, no more emptying the bagless and no more dirty filters to clean up I think. They are great vacuums for what they are.

Thanks

I have one of these models,from the same year,I found it on my road

I don’t think the noise stoped it could be the motor having hairs inside the fan clip or thrers oil inside that causing Just to let u know I had a hetty and i spilt oil on it and the same noise happend to me I hope the helps thanks❤❤❤❤❤❤❤❤❤❤

THAT HVR200-22 HAS BEEN THROUGH ALOT

@bootsowen, how do you clean the motorfilter around the motor? Mine smells because of the carbon brushes.

Are those Henry Crocs too? uncannily the same red :D

12:27 that's not what a henry sounds like

Ibasiac has one too.

Motor has had it

They should have called this an Arnie Hoover.

Have you got any more Henry’s

That HVR200-22 sounds like a sawing machine

I am sorry to hear that your vacuum making a really loud horrible noise.

I think it needs a new motor

Those bearings sound really bad they do need new bearings

0:04 there’s a hair dangling out of the exhaust.

If Henry's are noisy does it mean they just need a clean

You can buy them in England, Scotland, Ireland and the United States of America.

Motor sounds quite bad, using a Henry without a filter is not good.

Yes it is not good omg 😮

Crazy what people throw away. talk about wasteful.

You need a motor replacement. Still sounds awful after cleaning.

i make these btw :)

Is he still making that loud annoying noise on low after you just repaired him? Ug. Hhhh. That's got to be some kind of joke. But good thing that it better on high but it still making that annoying noise. It probably looks like you need to get a new motor for it I think.