Cleaning My Chainsaw After Daily Use

Рет қаралды 12,694

3 жыл бұрын

This is how I clean my Stihl MS170 chainsaw after every full day of use. It has been suggested that I might be overdoing it. I also show you how I assemble and tension my bar and chain.
------------------------------
🎵 Track Info:
GREEN LEAVES by Jason Shaw freemusicarchive.org/music/Jas...
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
Free Download / Stream: freemusicarchive.org/music/Ja...
Music promoted by Free Music No Copyright / @freemusicnocopyright9846
---
🎵 Track Info:
SOLO ACOUSTIC GUITAR by Jason Shaw freemusicarchive.org/music/Jas...
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
Free Download / Stream: bit.ly/_solo-acoustic-guitar
Music promoted by Audio Library • SOLO ACOUSTIC GUITAR -...
---
🎵 Track Info:
Title: Easy Day
Relaxation/Calm Music World
Artist: Kevin MacLeod
Genre: Instrumental
Mood: Relaxation/Calm Music World
Music: Kevin MacLeod - Easy Day / kevin-macleod-easy-day...
Attribution 3.0 Unported (CC BY 3.0)
------------------------------

Пікірлер: 27

@wizardsofwisconsin7400 2 жыл бұрын

There is absolutely NOTHING wrong with having pride in your things and the AMBITION to take care of them. I also have an MS170 to limb with and it is a FANTASTIC saw when it has a good sharp chain. Perfect weight and power for limbing in general. And your video is just how it’s done!

@lovestihlquality1369 Жыл бұрын

Agree, nice little saw. It's like a small dog with big dog attitude.

@davidmatz8538 Жыл бұрын

Outstanding, helpful tutorial, especially for a 10-thumber. Thank you!

@stephancaputa1464 3 ай бұрын

Incredibly helpful and straight to the point! Well done and thanks!

@stillwater62 Жыл бұрын

I have done that very thing after a day of use. I pull the bar and chain, clean the bar grove, if the chain has a lot of sap or resin, I have a cleaner that will soften and break it loose, then I lightly brush it clean. I take compressed air and clean the cooling fins on the power head, clean the air filter, then fill up the chain oil reservoir, and fill up the gas tank. I then put the bar and chain back on, grease the nose sprocket, adjust the chain tension, fire it up and make sure the chain is getting oil and all is working properly. Then I am ready for the next day if need be. My saw was bought brand new back in the mid 1960s and today, it still looks and runs as good as it did the first day I fired it up. It is a Homelite Super XL AO, with a 16" bar. I have saved the original bar, chain, and clutch and have a more modern and up to date assembly with a sprocket nose bar, and a semi chisel chain instead of the original Oregon Chipper Chain and hard nose bar.

@roguepetunia Жыл бұрын

Thank you. This is so useful. Your instructions are very clear.

@nheng6913 Жыл бұрын

Got into chainsaws earlier this year and now have several, including pro, and just built an MS200T from parts. Coming from other technologies, I was appalled to see that virtually no one cleans filthy saws before working on them. It's probably all time and money but I've never seen car guys do this. Today, however, if you go in with a dirty engine, you'll come out with a dirty engine and a shiny new oil filter (for example). A good garage may suggest an engine cleaning, which will cost ya, but at least they offer. So, good job, keep it up! You will not damage anything. Just keep strong corrosives away from metal components and strong solvents away from plastic, hoses, etc. The saws are pretty tolerant but will last even longer when clean. And, WD-40 is your friend when saws are wet. WD-40 is not that great for lubrication or protection but was designed for displacing water from internal spaces. This and compressed air is good stuff!

@MtnBoar Ай бұрын

I have cleaned my Tanaka until today because the chain was dull . I wish they still built them so well. I will clean more often now that they sold out. So I probably won’t be able to get quality parts: my science is to flip the bar every time the chain needs sharpening helps to prevent uneven wear

@wolffortenberry8729 Жыл бұрын

Thank you so much for this super helpful, detailed video!! Now to go clean my saw and get it ready for a day of cutting :)

@matthewdonoghue321 3 ай бұрын

Oh thank god I am not the only person who gets mentally screwed with a tangled chain. P.S I also have a MS170.

@michaeltedin3648 4 ай бұрын

Very nice video. Clear and concise.

@margelatutrandafirulgalben3156 Жыл бұрын

Nice video. Thank you very much.

@Arifin_Chainsaw_Kayu Жыл бұрын

already beautiful diligent cleaning , cool sis Sarah 👍👍👍👍

@greatdane3343 Жыл бұрын

Great video!

@elianeauclair8810 3 жыл бұрын

Une vraie pro! :)

@viperstrike3827 3 жыл бұрын

I keep the bar and the inside of the clutch cover as clean as i can for oiling.

@rogerknight2267 Жыл бұрын

Same here. I’ve cut certain woods in the past that just packed out the inside of my clutch plate. I had no idea until I just happened to pull the plate off for some other reason. I felt so guilty for being so negligent with my chain saw. Never again.

@BestUserNameUK 2 жыл бұрын

Nice👍🏼

@soulassassin2494 3 жыл бұрын

Hey Sarah, So cool seeing you clean your chainsaw. Great job and would love to see your earlier videos when you first got your chainsaw and were trying to get it started and running

@TheRealSarahCatherine 3 жыл бұрын

Hey! Thanks :) Unfortunately, I was just starting out with filming and don't have any usable footage of those times.

@soulassassin2494 3 жыл бұрын

@@TheRealSarahCatherine Your welcome and too bad

@dh0well 2 жыл бұрын

Maybe it is overkill, maybe it isn't. Who cares? If YOU prefer to keep the saw clean, that's freedom (to choose) baby! Still, if you are using the saw multiple days in a row, I'd wait until you're all done, then give it a good cleaning. FWIW, I always clean mine after using it (which is fairly infrequent).