CleanSpace2 In-depth Overview and Demonstration

Рет қаралды 39,667

Күн бұрын

Jon Imms from CleanSpace Technology provides a detailed walkthrough and demonstration of the CleanSpace2 Powered Respirator. Key topics discussed in this video walkthrough include:
- Introduction and Overview 0:00
- Filter Options 7:47
- Fitting the CleanSpace2 9:55
- Air flow details and CleanSpace2 demonstration 12:18
- Donning CleanSpace2 15:03
- CleanSpace2 components 17:31
- Flow testing CleanSpace2 20:15
CleanSpace2 with the low profile HEPA filter is available through leading industrial and safety distributors across the United States, Canada and North America. Trial Kits can also be purchased online at cleanspacetechnology.com/us/t....
For more information about the CleanSpace2 or to request a demo please visit the CleanSpace2 web site at cleanspacetechnology.com/us/c....

Пікірлер: 42

@samdeamer4535 Жыл бұрын

Used this at work for the first time today, absolutely amazing 👍 can’t tell you how happy and grateful I am for this product, well done!

@marcswan3559 3 жыл бұрын

This Is by.. far.. THE BEST facemask this world yet has ever seen!! They thought of everything 👍

@20thcenturyboy85 4 жыл бұрын

This product is ahead of its time by a couple of years!

@commonsense3050 5 жыл бұрын

Walking into an account to discuss this product with a customer right now!

@perceive8159 4 жыл бұрын

A well and intsructive video, the product is ahead of others in many well thought out features. Possibly the only industrial application it might not be practical is in a paint booth application. Air filtration outside the booth would be easier to manage with less contaminants entering the filter.

@captainrutabeggacrossout8482 Жыл бұрын

I just ordered the cleanspace 2 kit online from your website. I am excited to see how this papr will do. Im writing this while sick with metal fume fever from galvanized steel.

@Retro_World_Arcade 5 жыл бұрын

Can these be used in the automotive refinish field?

@infinitycrops 3 жыл бұрын

I want one so bad. I wonder if they have any like that with microphones?

@johncortinas1735 5 жыл бұрын

i have used cleanspace at my work place .it,s the best .for a big man like me i had a hard time useing the p100 i would buy this

@alimoradi4579 3 жыл бұрын

How can tobuy it ?

@lukecrawford9680 3 жыл бұрын

can you fit the output filter on it that you make for the medical version? Is there a version that has some noise dampening?

@liamlogan669 Жыл бұрын

i want to get the cleanspace EX. seems like the best option because i can use it on every jobsite i go to without having to buy a new one

@johngray9434 4 жыл бұрын

Re the filter safety alarm - does the alarm activate on basis of gross flow rate used through the filter or is it based on the actual build up of particulate matter within the filter? If based on gross flow rate of air having passed through the filter it’s had to see how the alarm could be reliable where the unit might be used in generally clean air environments relatively free from contaminants.

@richardlloyd151 4 жыл бұрын

If air is "relatively free of contaminants", then particulate build up would be expected to be proportionately less. How then, would this make the alarm less reliable?

@jhellier Жыл бұрын

What is the milliamps for the battery? Can you plug in a usb power brick to top up the charge?

@timwithers4230 3 жыл бұрын

Do they sell this in the USA? Also if so how much is it in dollars?

@KROKO123OOO 3 жыл бұрын

Hi, Thank you for this video. Can you tell me

@kelvingay8765 4 жыл бұрын

Does wearing it for a extended hour of time cause fatigue to the neck?

@helm311 2 жыл бұрын

I work and wear it at least eight hours a day and no it's not cause me any neck pain. If you adjust the head strap you will not feel any pressure on your neck

@t-rexfit2948 2 жыл бұрын

I have a clean space mask but where do I get the filters?

@markgonzaga4733 3 жыл бұрын

Is the battery replaceable?

@seabastia 8 ай бұрын

Hi.. I have a 2017 unit... it will beep and filter red light light even when the filter is cleaned, in a moderate dusty application. I would like to calibrate but it does not seem to work. I press the 2 buttons to have red and blue lights glow but no test. My unit does not have the "flow test" labelled button but 1/2/3 filtering level... Any recommendation please ?

@muhammadalfitripurwanto1573 3 жыл бұрын

how much ... and can I be come distribution in my country

@carolamoulton 3 жыл бұрын

Where does the exhaled air go? Is it also filtered?

@edgarsevillareyes1163 3 жыл бұрын

not on this one I think, the Halo does have a exhaust filter

@runcycleskixc 3 жыл бұрын

As an allergy and chemical sensitivity sufferer, I was hoping CS2 would work better than non-powered units by providing extra air flow for intense work. However, the gaskets, tubes, and other materials used in the construction off-gass very strongly (incomplete silicon curing? Plasticizers?). The off-gassing is beyond comparison with standard non-powered respirators from major suppliers; it smells as if one walked into the HomeDepot paint section. For me, it's a deal-breaker. In addition, the blower LPM is quite limiting, and one cannot "suck" through it. Thus, at high work loads, the unit has a higher resistance compared to standard non-powered respirators. Max human air intake intake is 200 lpm, corresponding to 400 lpm peak "in" flow rate. The unit's blower is rated at 100 lpm. Thus, if one exerts oneself beyond that even for a few seconds, one can faint. Finally, the blower is quite loud, but that would not be a deal breaker for me provided that the unit did not off-gas.

@The_Bearded_Lady 2 жыл бұрын

it has a 220 lpm max air flow not 100lpm. i've not noticed off-gasing. same silicone masks used in medical devices.

@helm311 2 жыл бұрын

Maybe you got a defective one. The one I got has no off-gassing whatsoever. I find it to be superior to the non powered respirators I used to wear. Even when I'm exerting myself I get plenty of airflow. This thing has totally spoiled me I could never use a non-powered respirator again.

@IHeartGallery Жыл бұрын

This is such a helpful comment, thank you! Have you found a mask that works for you?

@runcycleskixc Жыл бұрын

@@IHeartGallery I ended up getting a 3M PAPR and adding a charcoal flow-through filter.

@IHeartGallery Жыл бұрын

@@runcycleskixc brilliant, thankyou!

@ZeppinEUW 4 ай бұрын

Anyone knows why mine keeps vibrating, it's brand new?

@marbielaxamana1009 4 жыл бұрын

Will it fit the face/nose contour of asians?

@pauleywalnuts4488 5 жыл бұрын

Give me one play boy

@captainrutabeggacrossout8482 Жыл бұрын

This is really cool but will it work with a mustache?

@justinwilliams9228 4 жыл бұрын

Can you wear it with a beard?

@gasparrosetani 4 жыл бұрын

Browsky wtf

@coagulateblue 4 жыл бұрын

For folks that don't know, part of the allure of a PAPR system is that it does not require a good seal on the face to be effective because of the positive air pressure. This makes it a great option for bearded folk - since beards interfere with the seal of the mask on the face. Since this system isn't constant flow, it raises the question as to whether it requires a good seal to be effective. I think this is very cool technology - but whether it would work well with a beard is not directly addressed. He did briefly go over how it reacts to temporary breaks in the seal, but if you have consistent low level leak (such as a beard might produce) I'm not confident in how it would behave. Perhaps the resistance form the partial seal would be enough for it to keep the pressure on, but when it is completely off the face (no seal) it turns itself (as a feature). Therefore, it would need to be able to make a distinction between a constant leak of a partial seal and the constant leak of no-seal, and for this to work you would probably need a reasonable seal - so it might not work with really large beards. I like the low profile and the fact that I could use this without a paired specialized helmet. As cool as the core pressure technology is, it would be nice if there was an override for traditional constant-flow mode, or a minimal baseline pressure. That way it could still be safely used with various beards - even if at a reduced efficiency of battery and filter.