Clip System vs. Nail Strip Panel: Standing Seam Metal Panel Comparison

Рет қаралды 42,672

Күн бұрын

Is a nail strip panel or a panel that uses a clip a better choice for your standing seam metal roof? Comment below to have your question answered on a future episode!
**********************************
Choosing between a nail strip panel and a panel system that uses a clip for your standing seam metal roof will affect the cost, installation time, and profile options, but how does it affect durability? On today's Q&A Mondays episode, Jeff Hock joins Thad to discuss what the differences are between the two types of roofing assemblies, including which is a better choice in extreme weather areas.
Topics covered:
►Intro 00:00
►What is a nail strip and what is a clip system? 0:49
►Are nail strip systems or clip systems popular in the residential market? 2:08
►Are nail strip systems or clip systems popular in the residential market? 4:14
►What installation errors can make a clip system fail prematurely? 5:52
►How do you pick the right system for your roof? 6:48
►What are the max panel lengths for both system types? 8:21
►What materials do nail strip and clip systems use? 9:48
►Which system is a better choice for a high wind area? 11:04
Have questions about metal roofing? Comment below to have them answered on camera by industry experts in future episodes of Q&A Mondays!
**********************************
FOLLOW THE SHEFFIELD METALS TEAM
► / sheffield-metals-inter...
► / sheffieldmetals
Visit Our Website: hubs.ly/H0bFCn60
Subscribe To Our Blog: hubs.ly/H0bFYvX0

Пікірлер: 32

@KevinCGleason 4 жыл бұрын

Anticipating installation of a standing seam metal roof within the next few weeks. Your videos have taught me what questions to ask. Thanks.

@TheMetalRoofingChannel 4 жыл бұрын

Awesome, Kevin! Glad to help! -Thad

@SteveThompson-li2fc Жыл бұрын

I prefer the nail strip option for ease of / faster installation. My local mfg produces a 2” tall, structural standing seam snap-lock panel. I do my own “engineering” by simply adding more fasteners than what is called for in our hurricane zone. After Hurricane Ida I had ZERO failures of any of the standing seam roofs I have installed over the years prior.

@REVNUMANEWBERN 6 ай бұрын

COOL , I'm in North Central Florida WITHOUT the standing seam, the typical metal roof, BUT if I ever need to replace I will go with the standing seam, BTW, how often would you suggest I check the tightness of the screws on my roof? We have been here 7 years and have noticed some that have already backed out, and I'm replacing those with the larger diameter "REPAIR screws" should I replace ALL of them but just the loose ones that won't tighten?

@tr702 6 ай бұрын

⁠@@REVNUMANEWBERNdon’t listen to this guy and go with someone who doesn’t reference “ease of installment” when you’re paying top dollar for premium system. A nail flange strip creates multiple caved in spots because it’s too much pressure in one spot. And he just added more by securing it down. And guess where water sits. All those extra connections.

@Dead_Aim556 4 жыл бұрын

Ide love for you guys to do a specific video on hurricane prone area recommendations like Miami dade. What’s the recommend gauge/clip spacing/battens vs no battens/best underpayment/drip edges etc!

@TheMetalRoofingChannel 4 жыл бұрын

Thanks for the suggestion, Chris! Great idea! -Thad

@miltonacosta4261 4 жыл бұрын

Our company have a specific panel for that!

@markchandler1283 4 жыл бұрын

I second that request for a segment on Miami-Dade. ‘tis the season.

@TheMetalRoofingChannel 4 жыл бұрын

Noted! Thanks, Mark! -Thad

@martindekker8203 Ай бұрын

Great info thank you. Can you use any of these panels on a batten-type roof structure either steel or timber? I'm looking at building a Barndominium.

@danlindeke2561 Жыл бұрын

Saw standing seam system where every piece was freestanding and cap was rolled over standing seam. Beauty of this: Any piece could be removed for leak or repair and replaced without taking half of roof off.

@SteveThompson-li2fc Жыл бұрын

Not sure how that would perform in a hurricane, but sounds like an interesting product.

@augustincervantes8737 3 жыл бұрын

Do I have to use two by fours to put panels or just in top of my shingles

@brianrobbins3499 3 жыл бұрын

1x4 fir

@TahirChaudhryartist 11 ай бұрын

Where can i buy a clip that is 1” wide and 1.75” high?

@augustincervantes8737 3 жыл бұрын

Do I have to use two by fours on my roof shingle roof

@davidchillton1744 2 жыл бұрын

Usually it would be 1x3

@wolfman1549 3 жыл бұрын

So when is a nail strip good to use? Or are you completely against it?

@SirThomas1212 3 жыл бұрын

I should stay away from nail strip option especially in harsh weather area?

@TheMetalRoofingChannel 3 жыл бұрын

We always recommend using an engineered (tested) system designed for harsh weather areas, and for Sheffield Metals and many other manufacturers, there is no engineering available for a nail strip panel. -Thad

@garymitchell7551 4 ай бұрын

Use a larger flat head screw … some metal whip around the screw head

@danilberzin3556 3 жыл бұрын

And I think the most important thing is the clip system sits above the decking sold the panel sits above the deck and then there is an air movement as far as nail strip sits right on the decking and there is no air movement so condensation my collect underneath and rust the metal out

@TheMetalRoofingChannel 3 жыл бұрын

If you have proper ventilation and underlayment, condensation should not be a major issue. Ventilation regulates temperature and the underlayment protects the building from water infiltration. If any minimal condensation were to form on the underside of the panels, it typically will evaporate harmlessly by the time the sun heats up the roof. -Thad

@directrue1742 2 жыл бұрын

To buy my first metal roof machine a nail strips is a good investment???

@bartnettle 4 жыл бұрын

Sales personnel talking about product but what about cyclone areas?

@TheMetalRoofingChannel 4 жыл бұрын

We talk about high wind areas at 11:04. -Thad

@dnahulvey Жыл бұрын

Or just use a roofing nailer to install panels with nail flanges. When you put Z-bar closures on every panel with two screws minimum, how is that panel supposed to move?? Stating that those panels need to move around is the silliest thing I’ve ever heard when you’re screwing Z bar tight tho the deck THROUGH every single panel…

@panamacitybeachbum Жыл бұрын

You caught that, too. Recommending the most expensive product is a typical sales strategy.

@woodlandjosh 11 ай бұрын

Using Z closure pins the panel to the roof at the top end of the panel. If screws aren't overtightened on the nail flange, the panel can shrink and grow with changes in temperature. The bottom end of the panel will move while the top end is constrained. This is exactly the same as if a clip system were used. If installed on a hot day, make sure to leave some room at the bottom end of the panel for contraction.