You and Angus are the only guys I trust for reviews. Another banger, as the kids like to say.

For me the biggest red flag is the deception of flow rate. A company has to respect its customers.

11:23 That test file makes me think of the Volkswagon diesel engine EPA debacle.

Brutally honest! I bought a Bambu X1C based on your review and have been really happy with it. My printer is a tool. I don’t want to have to mess with it to get good results. The X1C does that out of the box.

You are the gold standard for 3D printer reviews.

STOP making copies of a slicer that you just make worse compared to the open source, all for the sake of making it closed source. Especially if your version is buggy or not polished. Cmon now, no one like scuzzlords. Thanks for the review and all the effort of testing, was interesting to see.

I love delta printers, I made my own large format delta. 500mm bed, 1.5m tall. You think this thing is big, mine looks like a phone booth (I built an enclosure for it). Deltas can have a something that looks like VFAs, but they're not, they're delta artifacting, which is why those who know what they're doing, use 400 step motors and small pulleys. My delta uses awd (6 motors -- top and bottom) nema 17 400 step motors and 16t pulleys. The high step count eliminates the artificating, and you get parts that are actually as designed, however you can't get the 1m per sec moves to put on the box if you do that, I can push 600-800, because I use a 40v PSU (did the math -- and that is recommended max for my stepper combo). I can push accelerations, but to some degree it's a parlor trick. FL sun reps saw my delta on 3d printer builder groups and tried to get me to try theirs and make a video about it, why? Looks like they're after the specs not quality. Also knowing the math behind deltas, the delta print volume is a cylinder with a cone on top, to advertise max height as the tip top of the cone is SUPER deceptive, true build volume of a delta is the cylinder, you never factor that cone into it because trig computation there gets super sketchy. FL sun DO BETTER. I have the CPAP blower on my delta too, but mine is actually implemented with a true analog converter board, so you can dial in the amount of cooling you need and it actually isn't super loud when you do it right.

in this era of stimulating short videos, I find your video/voice soothing and make me slow down a bit to re-enjoy a real, in-depth review, it almost remind me of the vibe of the good old days when MK3 just came out and the community is full of helpful people and everyone is trying their best to make this technology better

Seems like a cool printer, I really hope they watch your video and make modifications to improve their product. You'll find out if they're a good company or not based on how they respond to criticism. If they can't take criticism they'll never improve

Fantastic deep dive review! Nice to see someone digging in on accuracy of parts off this machine

The quality and depth of your testing and analysis is outstanding. FLSun should be paying you for that! 👍😎

Every reviewer was dissapointed with that machine. Yours was the most gently worded out of the bunch. Botfarm comments show that they're really trying to capitalize on their investment, not really by improving their hardware/software. Classic corporate move.

I wonder if the engineers need external feedback to make the bosses listen.

Great review. I would not be happy at all if I dropped $1500 and wound up with all of these shortcomings.

Great review! I like how thoroughly you test, how honest you are with full disclosure, and how you tell the facts as you discovered them. You are very fair to the manufacturer, listing the deficiencies you found, but with helpful suggestions about how they could be remedidated.

Finaly a propper review and not just a "Hey I unboxed this and printed the 8m benchy that is not comparable because it doesn't meet the speedboatrace rules but looks okish for the speed." A big thank you for that and especialy for your honest words. Sadly I'm not surprised they tried to change your script. Because ever since, their machines are great (hardware wise, not the software!), but the company itself is kinda dodgy. They don't just exaggerate their specs, they straigt up lie to the customer. When I saw that internal structure of the melt zone I immediately throw away my hopes of prrinting carbon filled material with the T1 I ordered. I assume it has the same structure. Maybe we will see an aftermarket upgrade for that. We'll see. Luckily I have a big Core-XY that can print carbon fiber without any problems. But the craziest thing I saw from them so far was the lottery they did via a facebook livestream. The smaler prices were drawed via a wheel of fortune, wich was kinda ok but prone to error, because they didn't use a service for that, but everyone hat to comment in the stream a special phrase and they handpicked them out which opens the possibility to overlook some. Afterwards the winner hat to send them an e-mail. So in theory others could have send e-mails as well to claim a prize. But the last and biggest price was the S1. And this drawing was totaly rigged and they didn't even try to hide it. Spontaniously they changed from the wheel of fortune to method I never saw anywhere before. Everyone had to post a special phrase again in the chat of the stream again. But you didn't get into a pool by doing that. They let everyone do it over a few minutes repeatedly because they would stop at an unknown time. They showed a mobile phone into the camera with the stream chat. And when they chose to stop the one at the top with the correct phrase would win the printer. But here it comes. There were.. I think it were around 1600 people, watching the stream. So the chat was flooded with posts. But on the phone where only shown posts of the same 3 (if I recall correctly) people. And everyone was complaining about that in the chat. Obviously they ignored it and the ones that were shown in the chat didn't say anything to that as well. A minute later the stream ended in a hurry. That being said, the T1 will be my third FLSUN printer, replacing my SR and I hope it will be just as great, because I realy loved the SR and it already has a new loving home. But the people behind FLSUN are the worst.

As usual I’m impressed by the depth of comprehension you bring to the project. 👍

I got a FLSUN SR for a song. Thankfully because I've done nothing but have to tinker with it. They haven't released their customized Marlin software going against the GPL license. Since they have released new model printers it seems they've abandoned it. Vendors like this are sure to fail.

Appreciate the honest review. Refreshing to be honest.

As always, love your content and your upfront honesty.

I watched your other video before this and I was intrigued, I love that you have been honest and true, don’t stop being you! It’s your review and your opinion they cannot say anything! Also a huge amount of respect to do this!

Great review. I had no unanswered questions at the end.

What an excellent independent review. Saves everyone time and money and enjoyable to watch.

Thank you for your work on reviewing this machine for us. Good job!

Now that's what I call a full honest review!

Great review, pretty much covered all my questions

Excellent review and insights! I watched this as soon as it popped up in my feed because I was curious about this printer and considered buying one. I’ll wait and keep using my X1 Carbon.

Thank you for being so thorough with your review.

Amazing review... Thanks for your excellent review... Please stay safe and well ...

Gday James, I throughly enjoy watching good fair honest reviews that say it how it is, many thanks mate

Wow. Haven’t watched your channel in awhile and am not familiar with 3D printing but your review was excellent as usual. A lot of what you said went way over my head but I still picked up on some of it. Excellent presentation.

Excellent Review. I can only hope that the the manufacturer uses the review process to improve vs market. Other's, like Qidi, did just that and earned considerable respect with a follow-up review that provided evidence of solutions to the identified problems.

I'm so glad I found your video. I was seriously thinking about buying one of these based on the claims. You saved me from a lot of frustration and disappointment.

Good honest review James. Thanks

Hi, u became my preferred youtuber even if I spend a lot of money buying tools being influenced by your videos😅. I think u r one of the few that give a honest review and that is brave. Bravo. Best regards from Florence Italia 😊

I love your reviews on various products. So much so, that, as soon as I could, I ordered the Qidi Q1 Pro, which arrived a couple of weeks ago. I'm still learning Fusion, I was pretty proficient with AutoCad LT, but Fusion is a mare. If ever you want to do some Fusion tutorials I'll be first in the queue. Thanks for the work you do putting the content out. 🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿

The best review I've seen about this printer, reviewers should learn from you.

Awesome and interesting review of the S1! 😊🤘

Absolute fascinating presentation. I'm dazzled.

Thanks. I feel your pain as teaching three-legged elephants to dance is not my cup of tea either. I'm looking for strength, accuracy, and functional parts printed with adequate speed. This is because my cad assemblies are typically prototypes of multi-element fitted parts which (in some cases) will be produced with hard tooling or cnc. I was impressed by your recent video on that subject.

Wow, this looks like a total disaster... everything from the software side, misleading marketing, to the print quality. Kinda shocked they released the machine in this state.

Awesome very detailed review

Thank you for your honest review!! It’s nice to see someone who is honest and not giving fake hype like other KZfaqrs. I pre ordered printers before and I can tell you they shouldn’t be major issues like this in 2024 anymore. Yes it is nice to see company’s pushing the limits of printers but not at the cost of people’s hard earned money as guinea pigs. This is what beta testers are for. Thank you again for the review!!

Appreciate this review

I LOVE honest evaluation of products - Good & Bad... It allows the prospective buyer to make a calculated purchase - THANKS

Great Review with crystal clear transparency, thank you! I purchased the S1, also had it about 1 month. I have not had much time with the machine but can say your review is spot on. My print quality so far is good to ok but I have only printed with PLA. The slicer concerns you mentioned are all the same thoughts I had upon using the machine. I know FLSUN will update their slicing software although, I would rather use a 3rd party like Cura, which I use with the FLSUN V400 and have enjoyed the machine for 2 years now. Even with Cura, as one would expect, I had to create my own presets after dialing the V400 in. Has been great ever since! If a 3D printer brand makes their own machine and software, I would think they would have spot on print settings to choose from, and several, changing in speed and quality 🤷‍♂🤷‍♂ One last thing I will add is that the last run I had with the S1, the print detached and created a huge mess. Not a spaghetti mess, the nozzle melted to the print and created a funnel upward. The plastic was extruding upward into the printer head encasing the hot end along with wires. Now, this print was running at night, I woke to the machine sitting still with an error "Machine Stopped Abnormally" 👀 Sooooooo...... I am dealing with that at the moment. Contacted FLSUN a week ago asking their advice. They suggested I take it apart and send them pictures of the damage. They said they will replace any damaged parts free of charge. I finally had time today to dive into taking it apart, and that was not fun😒...... lol. Now that I am to the point of sending out pictures & showing what damage incurred, their website is down and emails are kicked back saying not delivered! Horrible start with the new machine, so hopefully it will be taken care of as they said it will be, when I was in contact with them. Time will tell... Not going to lie.. I wish I would have waited for your review.. I think I would have a Bambu sitting on the shelf, not the S1.

Thank you. Love your content

Thank you for the review

Excellent review!!

When reviewers say the company sent me this printer to review and I was not paid one can conclude that the payment is the printer. With that said most reviewers do a good job with the reviews they do the Pros and Cons but when a company outright lies about its product that is unacceptable thanks for pointing them out and standing by your word for doing an honest review. Wonderful Video I am Subscribing.

Thanks for the review , I trust your opinion %100

Thank you for a great review! I got the v400 on release and had mostly the same issues. Still I loved it (briefly). Just looking at the motion system running is hypnotic. Then I of course got the X1c and my deep feelings for the V400 just faded. It became an other dust collector that I finally some months ago convinced a friend to adopt…

I’ve never seen a review come out better than a bamboo lab Printer

Wow! Really thorough and honest review. Functional prints are really important to me. I enjoy tuning, but at this price level, they should really have more ready to go for the user as a baseline. It's a super impressive machine overall, but needs some work on the software side at least. I'm excited for the T1 though, which I think is a more reasonable option for most people. For now, I still have my sights set on a Qidi.

Great review.

Excellent review

Love the honesty❤

Awesome review. Would love to see a followup and check what flsun improved over time. Regarding the print issues, perhaps the closed-loop steppers contribute to some of them.

This is an excellent review…just what I wanted to know!

Great analysis James. Thanks for the shoutout!

Great review James. I was hoping this big boy would perform very well. Maybe this review will help make it a better machine. Having worked in manufacturing (Quality Assurance), I have seen deadlines, money woes, and the echo chamber effect cause teething problems in good basic designs.

Great review

What a great review.

That is one damn HUGE printer! Lots of attention given to this printer and understandable so but I think the better option for most people is the small T1. Hope to see a review on that T1 soon

Kudos to you do this in single shot and standing there for over an hour.

Thanks again James for that test... I never understood the use of delta kinematics for anything precise, there is too much that can fail. Personally I was fed up with constant tinkering on early printers so I went to a Bambu P1P. And I received yesterday my new P1S+AMS, the previous one will be dedicated to PET-CF with a 0.6 nozzle. Cheers, Jean

8:00 Hot tip, I love ASA as much as the next guy, and have found that putting a layer of PETG down first saves the bed. Sticks amazingly well while printing, then separates from the PEI and ASA amazingly well. Can also do multiple layers, then iron them to remove bed imperfections and get a pretty good smooth first layer of ASA. Give it a crack ;)

I will stay with my Flashforge thanks, 1/3rd of the price and it is point and print. I have 1300 hours on mine. The build plate got replaced at 1250 hours and I put a 265 degrees C hot-end in it at that stage. For the rest I wipe the screws and rods down now and again, re-grease the with a Q tip dipped in light grease. Both the slicer and machine auto update. The default settings in the slicer work. The filament can be from anyone, no RFID tags. This is how printers should work in this day and age. Thanks for your review, it certainly assists with purchasing considerations.

Having worked at locations with some very interesting managerial approaches, I can imagine it looked something like this: Sales team: Hey, we want to hit XXXm/s Manager: Cool, no problem Manager: Hey team, we need to hit XXXm/s Hardware team: Uh, I'm not so sure about that Manager: well, we've already sold it Software team: Hmmmmmm... maybe we can do something about that.

Excellent review for the technically inclined FLSun owners.❤👍

I own a Bambulab (P1P to P1S to X1 (Should have bought the X1 the first time)) because I trusted your review of it (gotta thrust my fellow software engineers) and boy is it a game changer. I used to hate FDM printing so much that I switched to resin printing (after 10 years). I never thought I would go back, but when I saw the print quality of your parts with the Bambulab I was blown away. Seeing the quality of what you got with the FLSUN I would never buy it. It's like coming back to the old FDM days. Yeah ok, fail, but fail fast, but ideally it would not fail and got it right the first time. I had maybe 4-5 failures on the Bambulab but it was mostly my fault.

Thanks for a real look at the S1. Seems like FLSUN has the hardware part down pat however they seem to be lacking when it comes to the software side. Good factual video.

perfectly honnest revew 👏👏👏

Great review! Just wanted to add that 30-40 mm^3/s flow rates can definitely be achieved on bambulab machines using an aftermarket hotend. I use the often recommended aliexpress hotend for my P1S with a CHT style 0.4 and am able to push PLA at 34 mm^3/s.

In with the first thumbs up! Your mention of being handed a "suggested script" reminds me of when I sent off to have our dog's DNA analyzed. In the form, they asked for both a photo, and what breed we were told the dog is. Um, no, that's not how this works! Glad to see that you feel the same.

Now that is an honest review, I’d buy that printer if they make those improvements

It's nice to see a few reviews of the S1 out now, but I can't justify the money or space. I'm hoping it bodes well for the T1 though. Hers's hoping for some reviews soon!

Bardzo dziękuję za tą recenzję. U nas w Polsce jest takie powiedzenie "Cygan przez wioskę idzie tylko raz" Wyjaśnię to, bo chyba tylko Polak to zrozumie dobrze. Chodzi o to, że Dawniej Cyganie szli przez małe wioski i sprzedawali ludziom różne rzeczy, które były bardzo złej jakości. Mówili, że są super, że są najlepsze, brali pieniądze i nigdy już nie wracali do tej wioski. Podobnie jest z tą firmą FLSUN. IMO wybrali system cygana- okłamać klientów, niech kupią, a następnie się martwią problemami. To zły system, bo ludzie w zamkniętym świecie 3D szybko wymieniają się opiniami i taka drukarka umrze, Ja na pewno jej nie kupię po tym co Pokazałeś i bardzo ci jestem za to wdzięczny Uratowałeś moje pieniądze!

Good review, printer in beta...., I still don't understand why all brands release clones of slicers that already exist, they should put all their effort and release profiles for their printers with different nozzles, materials, quality.

Great indepth quality review, thanks. Even just hitting 40mm^3/s for a couple of inches of a print run is not the same as a sustained 40mm^3/s. These flow rate tests need to demonstrate sustained flow rates for nearly the entire width (or delth) of the bed.

I have no use for a 3d printer but I still enjoy these. Hopefully they take you constructive criticism to heart and work on the issues. 👍👍

If you get the chance, id love to see you review the neckog injection molding machine.

Software signing is a racket though. There should be a way to sign software without paying rent to some certificate authority indefinitely.

Thank you for a proper review on this printer! The other reviews I have seen are too kind. Especially with the marketing nonsense and poor print quality. I am surprised with the salmon skinning. Properly dialled in deltas can have unmatched print quality because it doesn’t have the same z-wobble to deal with. Perhaps they need to increase micro-stepping and slow it down a touch.

It took me until the "Holy cow, it's big" to realise that you hadn't edited in a png of it next to you.

Reviews like this are exactly what the manufacturer needs as honest feedback. But, it needs to be done EARLY, preferably as pre-release testing, not only to fix problems, but to insure that Marketing isn't over-promising. I would be interested in seeing an updated review if they manage to fix most of the issues. How a company responds to reported issues is a key part of their reputation. Making excuses only lowers the reputation level and customer trust, while fixing problems or even just admitting that issues exist(ed) would improve it. As a potential customer, I want to know what the practical limits are, not what their Marketing group is hyping.

Nailed it and destroyed it for good reasons! I started 3d printing with a delta and it always was a PITA. It was huge, but in the end, 90% of the prints were rectangular and you were running out off print space. I never managed to get it print dimensionally accurate and ditched if for an ender 3. Which brings me to the point that you won't be able to replicate the E3's print surface on this FLSun beast! You are still missing 10mm! So where will they head to? Trying to match a Sovol Sv08 by having a build plate with 50cm of diameter and 2.5m total height? It just doesn't make any sense anymore! These machines get so comically large and complicated and FLSUN is not even managing to tackle the basics! Time for some changes! BUT: if having your own phonebooth in your workshop is up your alley, by all means buy it! 😂

Do yourself a favour and get some of Bambu’s liquid glue pens, which are link bingo ink dabbers. You’ll have way less issues getting prints in materials other than PLA to release from the bed material. The stuff goes on super thin, being a liquid, and you won’t even know it is there other than when the print is over and it saves you a bunch of potential hassle. And being water soluble makes it a cinch to clean off the bed between prints, or when you’re just using PLA.

This is a really cool review! I saw a couple of videos about this printer, but your video is so detailed! I miss the times of Ender 3 printer. When printer were about what they are advertised... But now, you have to divide everything by 10 = ) Even Bambu printers suffer from marketing. What to say about others? I personally do not like that speed hype. So I now I am going to your X1 review = ) They talk about those Bambu's so much and all talks about 'look at how my table is thaking'! And only 15mm3/s? I installed BeMeGe printable BMG clone and copper heatblock, and I have got 18mm3/s on PETG. On stock Ender 3. I did not install any high voltage motors like those benchy shaped speed community users. Just some direct mod and upgraded firmware, set accelerations to 3000mm/s2 and it prints less then 2 times slower then Bambu. So what you wanted from FLSUN? If Bambu is markting shaking head thingy? The whole insanity shaking idea is about 'shaking' the community and users. Before that most manufacturers just written large numbers, like 300 or 500 mm/s. But actual accelerations was not so high. But people believed those numbers. And even today they may look at numbers at this FLSUN printer display and believe, that it prints 1000mm/s. Bambu makes it too look fast. But I look at their PETG profiles. (the generic ones) and it's 150mm/s maximum. Only travel speed is 500 actually. And now they create printers with custom frames. I love Ender 3 design as you can fix tools and upgrades anywhere you want on the frame. And even replace parts, or repurpose them. There is a PET extruder model which made from old Ender 3. What will they do from modern Ender 3 V3 frame? Nothing I guess. But it's all an old mans mumbling. Nevermind = ) Anyway, good video! Thanks again. I am transitioning to X1 review. Hope it will be as detailed as this video.

nice free testing

I have the v400 and it seems that FLSUN products are older school in that respect - they require tinkering. the v400 is a constant battle to get good prints, where as the X1C is a very simple plug and play machine. Thanks for the review.

It's amazing how manufacturers still believe that they can release printers without proper printer profiles. It makes me think that they didn't even properly test those maschines, how can you test and tune hardware for VFA when you don't even have a proper slicer profile?

Awesome review, now i know what to avoid 😂. I'd love to see a review of the QIDI X MAX 3, i'm quite interested in that printer and want to buy one but i don't see any good reviews that are serious like yours 😅. (Print volume 325x325x300something so kinda big)

so are we going to talk about the elephant in the room? holly crap that thing is huge

110 in flowrate with a 0.4 nozzle is difficult, i have just seen such numbers (70-80) with Phaetus UHF and my very finetuned corexy. Over 100, then in my eyes you are in vzbot land with their nozzle and Goliath hotend. Then you need motors,drivers and fans to match.

I've had really good success removing stuck ASA with the help of a heat gun. If you heat up the ASA, then try to scrape it, it comes off way easier (sometimes it'll even curl on its own around the edges).

12:35 "CHT LIKE GEOMETRY"... so pass agg! 😅❤ I mean, if you use the right material, that's an amazing way of getting around the patent right? Put the geometry in the heat break not the nozzle.

yay! new clough vid

Thanks for this. I use to own a Hatchbox Alpha which was about the same size delta, HUGE. That's the problem with them. Core XY printers can reach the same speeds and are so much more compact. I think I had forgotten how big a 300d x 300 delta is. The 110 mm^3 flow rate had me tempted though. Now with seeing the CHT built in to the heat block and not an interchangeable nozzle, no thanks.

Haha, I saw FLSUN and for a second, though you might have moved to Florida for some reason or where visiting and were making a video series on the scorching sun here.