Clunking noise when taking off from a stop on this Triumph Chain Drive. Here's what fixed it!

Рет қаралды 137,652

Күн бұрын

Have you ever heard a clunking noise coming from your transmission area and thought it was done for? Maybe you have a bike sitting right now thinking the same thing? Watch this video and go check out your bike for a possible pleasant surprise!
Thank you for commenting and please SHARE!
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
Click the links to playlists: (entire list link is the last one)
Harley EVO: • "How To": Evolution St...
Harley Twin Cam: • "How To": Twin Cam Har...
4-Stroke Engines: • "How To": 4-Stroke-Eng...
2-Stroke Engines: • "How To": 2 Stroke-Eng...
"Every Mechanic Should Know This Training": • "Every Mechanic Should...
Transmission: • "How To": Transmission...
Wheels, tires, brakes: • "How To": Tires / Whee...
Electrical: • "How To": Electrical S...
Fuel, air, intake: • "How To": Fuel / Intak...
Suspension: • "How To": Suspension S...
All playlists by type:
/ conleybuilt
You will see that many of the tips and procedures used are universal for skill sets "every mechanic should know" and that the biggest value to my videos is the teaching of these skills that are not found in a service manual.
I often get asked this question:
Q: How does one learn these skill sets "every mechanic should know" if they are not found in a manual?
A: NUMBER 1.....GET DIRTY and start wrenching.
-Ask questions
-Find a seasoned craftsman to mentor under
-Tech schools can significantly speed this time up
-Research, read, watch KZfaq videos
Tip: You will never learn it all from one source or in a short time period. No matter what craft you are trying to master, YOU must be dedicated and put the time in. THERE IS NO BETTER WAY TO LEARN THAN DOING! I will say it again, you must actually do the work to master it. You cannot just watch or read about it and master anything.
You want to be a master bike builder, mechanic, welder, nurse, carpenter or you fill in the blank?
-Don't take for granted opportunities to learn deeper
-Be humble and seek advice
-Be intentional with your learning plan
-Don't blame a school, job or your parents for not giving you ever answer, go get it!
I teach a motorcycle/powersports technician program at Western Iowa Tech Community College in Sioux City, Iowa. These videos are used for review of labs for students and creating a deeper understanding of the lesson/skill set. As there is often more than one way of doing something, may you enjoy this free information as much as our students do in person. PLEASE HIRE OUR GRADUATES!
If you would like more info on the program feel free to contact me @ 712-274-8733 ext 1204 or email shane.conley@witcc.edu
Are you interested in a career in the motorcycle industry? Click here for information on a great technician and parts specialist training program:
• Motorcycle Technician ...

Пікірлер: 80

@danielpaulson786 Жыл бұрын

Thank you for actually showing how to fix something instead of just quickly saying how to.i really do appreciate your content.

@How2Wrench Жыл бұрын

Hi Daniel...with a comment like that you'll love the channel. Glad it helped! You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZfaq Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

@cr45h20 3 жыл бұрын

Mine was just like yours! Hit her with the 92lb ft of torque as factory recommends and that did the trick. Thank you!

@How2Wrench 3 жыл бұрын

Glad it helped. Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@jhiggerson 8 жыл бұрын

Hahaha "SHE WAS LOOSE!" Great stuff Shane, thanks for posting!

@rylenhula8458 21 күн бұрын

Just found the same problem on my daytona today. I suppose it doesn't help that it's regular thread when I believe they're normally reverse thread so it self tightens as you go forward. Good video 👍

@How2Wrench 20 күн бұрын

Good find and save! We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZfaq Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

@Denali_Rebel 13 күн бұрын

I had this issue with my rebel after having my tire replaced by a shop. My wheel was misaligned and it seemed to fix the problem. 600 miles later its back.

@diptikhanna77 6 жыл бұрын

This is not the first video with this issue so it happens, thanks for sharing with us, one checklist item in case my fz6 misbehaves

@How2Wrench 6 жыл бұрын

Thank you for sharing…Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZfaq: kzfaq.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp Most Popular Playlist- Every Mechanic Should Know This: kzfaq.info/sun/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK

@Vilhyto 3 жыл бұрын

I had the same problem on my Tiger. The former owner had forgot to bend the locking spacer. When I tightened that up and bent the thing it was ok. This is in fact better construction than the one in my Honda that can get loose by its own. Never had the problem in Tiger ever since even I went thru many sets of chains.

@How2Wrench 3 жыл бұрын

Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@wowguywhy 6 жыл бұрын

Thanks for the vid. What would happens if this wasn’t fixed?

@mambrake 4 жыл бұрын

I'm definitely going to check this.... this might be my issue

@How2Wrench 3 жыл бұрын

@SlamBOfficial 3 жыл бұрын

It was exactly the issue on my Honda 300

@How2Wrench 3 жыл бұрын

@@SlamBOfficial Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZfaq Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@ronnieleemcdaniel3608 Жыл бұрын

How do I get my kick start shaft out when cover is off

@How2Wrench Жыл бұрын

That's a good question for Shane directly. You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine. Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry. Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the the member only vids with all the other benefits listed below. There are two immediate options that can get you a solution within 24 hours and quite often within the day. Option 1: Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers. He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to the perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Option 2: If you need help sooner choose his 1:1 option! What you get is a deep dive one-on-one with him. Use video, email, and phone support. He will drop his tools and work with you directly! Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

@dlb83082 5 жыл бұрын

ohhh thanks bro - I gotta check mine

@How2Wrench 3 жыл бұрын

@domnickachhap5968 6 жыл бұрын

front spocket shaft are loosed because running for long period make rear and tear in that thread bolts which waves side to side when race it..

@How2Wrench 6 жыл бұрын

Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: kzfaq.info/get/bejne/rNCmoKVhlsvGk6c.html Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com KZfaq: kzfaq.info Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp

@Force1Com 4 жыл бұрын

Can you be a little more specific on what the problem is Domnic?

@grayghost832 5 жыл бұрын

Once my ttr 230 was clunking when I'd take off and it turns out every bolt on the rear sprocket was loose. It actually lost one of them. I suppose if your chain is loose, it could clunk too. I'm hearing a little clunking on my new hawk 250 and have yet to check the sprockets.

@tonyrich4433 5 жыл бұрын

Would this sound get worse when more weight is added like a passenger?

@thatxrguy9051 3 жыл бұрын

Hey so My xr650l is making a terrible sound in second gear and theres a bandaid fix on the cs sproket holding it on you think thats my terrible sound im hearing or is it a second gear issue

@tapas1505 3 жыл бұрын

Exactly same issue on my yamaha FZ s 150. It makes noise during accelerating from zero rpm after shifting of gear but only when the engine is warm after running few kms. Couldn't find what could be the reason. The chain and sprocket are tight still.

@tapas1505 3 жыл бұрын

@ no.😔

@akshaypai1602 Жыл бұрын

Hi , i know this video is 6 years old..just wanted to check the symptoms to know if the same with my bike... when i accelerate on from get go, it cluncks and feels like there are some gears slipping on each other...however as i accelerate and go faster, its disappears.. it re appears as i brake and start again..there is no loss of power or so... does this mean that its just loose like in video or is my front sprocket gone.. I do burst acceleration as i live in India in Bumper to Bumber traffic and this issue just started..

@eameader 9 ай бұрын

This sounds just like my problem. I have a '15 Bonneville and this happened (the first time) while I was on a long-distance trip. I could not figure out what the sound was. Took it to the local dealer service shop and they fixed it with a chain adjustment they said. A year later, I'm getting the same issue, but louder and more prevalent. Snow's about to fly here in Maine, so I'm going to put it away soon. I took off all the guards and adjusted the chain last week. Made no difference. maybe it's that splined shaft?

@akshaypai1602 9 ай бұрын

@@eameader thanks for your input..You are right. It's not just the chain that needed adjustment but also the rear sprocket had undergone one sided wear (had clocked 30000kms on stock sprockets from the delivery).. so the chain would hop around the swing arm or sprocket.. I replaced the sprocke, adjusted the slack at ASC and ensured I lubricated every 500kms.. the noise is gone.

@pablitorentas4217 Жыл бұрын

Mine sometimes while shifting gears it sounds like the chain is rattling & skipping or jumping off sprocket & then it catches back on , if I’m ripping fast it gets scary because it the catches back on and bike goes from rolling to catching gear ? Any idea

@grimm6ix541 5 ай бұрын

Ever figure this out?

@wayneanese6382 Жыл бұрын

Was making the noise at low speed as I'm getting a knock noise at low speed in 2nd and 3rd

@chris-ip4pk 6 жыл бұрын

Wonder if that's my problem too. Zx6r. When pulling off from stop feels like its taking up slack. But chain is adjusted correctly. And when changing to second it clunks again like summat loose.. Im gonna check mine now... Thanks and greetings from the UK 🇬🇧

@sean845 5 жыл бұрын

Same issue with my zx6r. Did you find the issue ?

@hellomoto7285 4 жыл бұрын

@@sean845 Having the same problem.. did you ever find out anything?

@prawny12009 10 ай бұрын

Could be worn rear sprocket cushion rubbers.

@feliperodea8316 5 жыл бұрын

My garelli also knocks near the chain drive, will check if the nut is tight? Thanks!

@How2Wrench 3 жыл бұрын

@crs2crs2 7 жыл бұрын

I always wondered what are the chances to damage something if you leave the bike in gear to loosen the front sprocket bolt. How much force can the transmission take?

@crs2crs2 7 жыл бұрын

Ok, just signed up, it will be nice to have some proper help figuring things out for once.

@fitty77 6 жыл бұрын

I mean, i know it should not be done. But the question about torque i don't think it's that way. If your bike produces 70Nm, you must have in account your gear ratio to stablish the torque in the shaft. Let's say you have 70Nm and in 1st gear a ratio of 2.5, just as an example, the shaft must handle at least 175Nm.

@kultchur8066 10 ай бұрын

Awsome vid m8

@How2Wrench 10 ай бұрын

Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZfaq Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

@adithyan3784 6 жыл бұрын

My yamaha fz s fuel injection has the same problem... Chain makes a breaking mettalic noise when a accelerated rapidly after stopping, esp. With a pillion on it. What things should i change?

@How2Wrench 6 жыл бұрын

If it was a quick answer I’d try to respond here but I wouldn’t want to lead you wrong assuming certain factors. Reach out to me on my website contact page. We have been overwhelmed with ungrateful people and scammers so I had to do something for my sanity by screening the over 300 requests a week! Contact Link: how2wrench.com/contact/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Have you subscribed yet to never miss a video? Have you seen the video playlists kzfaq.infoplaylists? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench

@frisbeeshawn5356 5 жыл бұрын

It's me. I've got a Honda CB 1100 2013 bought brand new I'm at 23,000 miles. I was hearing and abrasive sound when taking off like a crunching. Powers good acceleration strong. I took of cover for front chain spoocket and had alot of built up residue from chain oil and dirt in case and outside of small sprocket. Took my time sprayed with chain cleaner removed build up gunk with paper towels and Q tips. Put back together all good resolved issue no abrasive sound smooth etc. Take off your front chain sprocket cover to see if that area is clean or dirty ?

@hardendurobosnia17 5 жыл бұрын

My yamaha dt 125 is making a bad noise when shifting into 1st gear Especially when i do it fast and with high rpm What could it be

@pauld.b7129 4 жыл бұрын

Shifting into first while your going faster isn't great. Unless your almost stopped, stay in second. Most bikes will knock into first if your going fast.

@vincevince2354 3 жыл бұрын

Even if the clutch is all the way in shifting to first? Is it still bad?

@hardendurobosnia17 3 жыл бұрын

@@vincevince2354 i forgot about this comment 😆, i ride a tpi now, sold the old thing 😅

@vincevince2354 3 жыл бұрын

@@hardendurobosnia17 😭😭thanks for the quick response, but yu think shifting in to first while the clutch is in is bad on any bike?

@hardendurobosnia17 3 жыл бұрын

@@vincevince2354 with the clutch in you can do anything, if it jerks forward or stalls it could be your basket or plates..

@python2400 3 жыл бұрын

I wish the noise was included so I could match it to my issue...I hear a clunk when I accelerate from a stop or any time I have the clutch pulled in

@How2Wrench 3 жыл бұрын

Wished I would have thought it back then. This a super old video and we have improved much since them...Shane offers a direct service to help if needed...links below. Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@Iswhatitisssss 3 жыл бұрын

Hey mate when I’m in neutral with the clutch in , when I change down to first the front sproket spins forward and makes like a loud squeal. Is this what’s happening for you ?

@How2Wrench 3 жыл бұрын

@@Iswhatitisssss Hey...Not sure if you are asking How2Wrench the question or trying to help Chris (thank you either way) Shane is in Africa training students this summer. We are just the social media team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a new channel member please reply back and we will see your KZfaq Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!

@drewtaylor6623 5 жыл бұрын

I get a clunk on my cbr 650f when in first gear and I relise the clutch just creeping forward in first gear but it's strange becauce it only does it 3 times out of 6 attempts. I have changed chain and sprockets and also cush drive rubbers in the hub and it still does it. I mean the clunk isn't that load but It will do it when riding sometimes when I drop into gears or soemtimes going up the box when I relise clutch . It's not very bad but I'm just dieing to know exactly what it is and I hope it's not going get worse can you help please?

@YeetxBoi 4 жыл бұрын

@NuffNuff the clutch creep is a need of slack adjustment, whether at the clutch pack or the cable adjustment. The other issue he's talking about is similar to what I'm getting on my nighthawk 250

@tapas1505 3 жыл бұрын

Exactly same issue on my yamaha FZ s 150. It makes noise during accelerating after shifting of gear but only when the engine is warm after running few kms. Couldn't find what could be the reason. The chain and sprocket are tight still.

@per8783 3 жыл бұрын

When i try to take off it makes a DDRRRRRR noise and it comes from the front sprocket and its vibrating. Whats the issue?

@How2Wrench 3 жыл бұрын

Let me try and see I can catch Shane to answer quick. His internet is limited right now until the weekend. Shane is in Africa training students this summer. We are just the social media team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a new channel member please reply back and we will see your KZfaq Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!

@toby7504 5 жыл бұрын

Wonder if thats my trubble on my vstrom 650. Has to check. Thanks for shareing

@How2Wrench 5 жыл бұрын

Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: kzfaq.infoplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com

@MRR7 5 жыл бұрын

Hi , was this the problem? Im having a clunking noise when going slow and it repeats faster as I increase speed.

@michaelvinson5481 3 жыл бұрын

@@MRR7 Hey man, I'm here tring to answer the same problem. You figure out what was doin it?

@MRR7 3 жыл бұрын

@@michaelvinson5481 Hi, it was the chain for me. It had a blocked link because it was old and has not been mentioned properly. You can clean it with a motorcycle chain brush, its an U shaped brush that reaches around the Orings. You can use water or diesel to clean it and then wipe it dry and use gear oil (75w80 or something thick) to lube it. That's what chain manufacturers recommend and that's what works.

@michaelvinson5481 3 жыл бұрын

@@MRR7 On it, thanks man.

@kingpete693 Жыл бұрын

I have the same problem

@How2Wrench Жыл бұрын

Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZfaq Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one

@trevorgrampp6789 3 жыл бұрын

Took my bike out to the river and it was having a tough time getting through the sand so I had to keep it at high rpms well that was the mistake I made it is a 14 tooth sprocket and the sand ate off 5 of them and rode my bike around about 6 months after and kept hear a ugly pulling noise so any one reading this that could be your problem too

@How2Wrench 3 жыл бұрын

I think you may have had a poorly made sprocket too...The sand alone would take quite some time to cause the damage and would most likely "equally ruin" all the teeth with wear vs. breakage. Another thing to look for is miss-aligned chain. The extra side force will cause the weakest teeth to break off first... Thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@halaboly8915 5 жыл бұрын

Deceleration, not de-acceleration Great video though.

@How2Wrench 3 жыл бұрын

@rossmiller2975 3 жыл бұрын

Why didnt you post the sound? Pretty useless video without it.

@How2Wrench 3 жыл бұрын

Hey...this video is 6 years old. We didn't have access to mount cameras on the bike back then. We have huge community of folks that trust our content and most likely could relate to the clunking sound...that being said we have over 700 videos on here and a lot of free and subscriber help too. Thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzfaq.info/love/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench

@rossmiller2975 3 жыл бұрын

@@How2Wrench Well sure but how am I supposed to know that your clunk sound is the same as my clunking sound?