Clutch and Gearbox Wolverhampton 2.0 2009 trafic vivaro primastar gearbox removal real time
Пікірлер: 23
@SoloBench6 ай бұрын
Lovely video of the front of a van and music
@clutchandgearboxwolverhamp20976 ай бұрын
That's why it's not a how too video...just gives our customers an idea of removal timescale...thanks for watching 👍👍
@SoloBench6 ай бұрын
@@clutchandgearboxwolverhamp2097 it's OK, I know what you're doing with every movement. The bit that seemed the fastest to me was the driveshafts because you didn't mess about with the lower arm or track rod end, just undid the two big bolts
@clutchandgearboxwolverhamp20976 ай бұрын
We do these daily on a while you wait service People travel from all parts of the country and abroad for our service...over the 12 years I've specialised in doing these vans I've got it down to a fine art...remove as little as possible and get her out 🤪😀
@liammorris8756 Жыл бұрын
How the jesus lord did you do that in 30mins!!! 1.9dci the same?
@clutchandgearboxwolverhamp2097 Жыл бұрын
I do these day in day out and have been doing for the last 10 years.its just a perfected sequence This is why people travel from all over the country for clutch and gearbox repairs on these vehicles 1.9 nearly identical apart from the starter is at the rear and there is a cat support bracket that has to be removed 👍👍
@SoloBench6 ай бұрын
@@clutchandgearboxwolverhamp2097 why do you remove the cat support bracket? I didn't do that but havent put the box back on yet
@clutchandgearboxwolverhamp20976 ай бұрын
It just makes the job a bit easier especially when putting box back in 👍
@SoloBench6 ай бұрын
cheers mate
@SoloBench6 ай бұрын
@@clutchandgearboxwolverhamp2097 some nob (not me) turned the key with gearbox out when I had a bolt of the starter motor removed, so it jumped off the flywheel and rotated and made a big dent in the turbo return pipe (1.9). Hopefully it hasn't damaged all 3 things
@roulettered56 Жыл бұрын
Legend. I have a 2008 2.0 Trafic is this the same model or different year?
@clutchandgearboxwolverhamp2097 Жыл бұрын
Thanks 👍 this was a 2.0 and a 2009 model so yeah the same
@thelawman Жыл бұрын
First time I've seen that done, in the ground and no dismantling if the front of the car. Can't understand why you didn't get more views on this job. Well done
@clutchandgearboxwolverhamp2097 Жыл бұрын
Thanks les....it just what I do day in day out that's why I do them with little effort 👍👍
@SoloBench5 ай бұрын
@clutchandgearboxwolverhamp2097 can you help me out.... how do you bleed vivaros? In the past after changing the clutch master cylinder I used an eezibleed kit to bleed it from the header tank under pressure and undo bleed nipple, but this time i don't think it's worked that well because selecting 2nd gear is awkward. Do you back bleed it from the bleed nipple under pressure and push fluid up out of the header tank?
@clutchandgearboxwolverhamp20975 ай бұрын
Pressure blead at 20psi....operated clutch pedal 15 times as quick as possible and then with pedal up open nipple...repeat at least 4 or 5 times...Will also help with engine running helps vibrate air to top of cylinder
@clutchandgearboxwolverhamp20975 ай бұрын
can you get reverse and first ok if so it may be a hub / syncro fault with second
@roulettered56Ай бұрын
@@clutchandgearboxwolverhamp2097 2008 2.0L - I can't get reverse or first without really jamming it, Other gears are OK. Any idea mate?
@clutchandgearboxwolverhamp2097Ай бұрын
@roulettered56 does it go in easily with engine off?? Reverse and first gear faults are normally clutch related
@roulettered56Ай бұрын
@@clutchandgearboxwolverhamp2097 Yes easy and smooth with engine off! Would this be a bleed issue or just worn clutch? Thanks for your help.