CMVS: Consolized MV1F Neo Geo MVS Motherboard

No video

CMVS: Consolized MV1F Neo Geo MVS Motherboard

Рет қаралды 8,806

Күн бұрын

I caught some of the fever and decided to give it a shot after fixing those traces under the Yamaha sound chip.
*As a note, If anyone is having a Z80 ERROR on their mvs 1 slot and there is battery corrosion around the Yamaha sound chip, it might be worth it to lift up the Yamaha chip and check for bad traces under it. I got the Z80 error when I didnt solder the Yamaha chip back down and tried to turn it on. Fun little experiment.

Пікірлер: 39

@KennAndJenn 11 жыл бұрын

Wiring the coin up button directly to the controller is genius! those RGB pots look sweet too! Awesome job man!

@COBOL 11 жыл бұрын

Great consolization, Luke! Very clever to put the coin in on select button. Now you need only a cool shell to cover the thing, a service menu' button and a cool LED :)

@SupremeJudge 11 жыл бұрын

If you install a Unibios, you don't need a coin in button or service button. The Unibios makes the select button on 1 slot boards the coin in button. You can also access the test and service menus from the Unibios.

@VintageTechRepairs 11 жыл бұрын

Cheers for the Tips Luke, Thats my next thing to fix on my MVS is Z80A Error just got my new solder sucker so let the fun commence

@RetroRepair 11 жыл бұрын

Lookin good man, been meaning to do this for years, you finally gave me the push I needed lol got a few in the loft with z80 error so will give it a go!

@CRTcade 11 жыл бұрын

Awesome job man. I really like the red, green, blue color pots you put on this unit, that's a great feature, I usually don't see them on cmvs units. Picture looks great!

@Darkroninryu 11 жыл бұрын

The more i see CMVS's the more i want one haha I love how clean this one looked and the RGB pots are an awesome addition! Great video and hopefully you get some sleep soon :)

@snkneogeoman 11 жыл бұрын

Well done! Kenny would be proud!

@xan1242 11 жыл бұрын

Z80 is the Zilog Z80 processor which is mostly used for controlling the sound chips. In the MD for example, games like Sonic 2 had a driver for Z80 that would play the music and SFX to the dedicated chips (PSG and FM)

@ChebitTV 11 жыл бұрын

Great job luke! On my MVS I put some 75Ohm resistors to balance the colors, plus in europe we don't need any video encoders :D

@lordvectrex 11 жыл бұрын

Almost every European CRT TV has s-video input but you're probably right about it not being used that often here.

@NeonGenesisPlatinum 11 жыл бұрын

Cheers Luke, i have a board that throws up the Z80 error. I will give your tips a go and let you know the outcome. Nice job mate.

@MarcoZ1ITA1 11 жыл бұрын

As lordvectrex said, but usually even if the TV is very input-poor there's always a SCART port which contains both RGB *and* Composite (with luma and chroma keying in the same way S-Video does). So if you have an S-Video output and no S-Video input on your TV usually you just buy an S-Video and RCA Composite to SCART adaptor and you don't lose the advantage of S-Video.

@BigDaddyDarth 11 жыл бұрын

I almost (ALMOST) bought a board to try something like that. But then I remembered my soldering skill SUCK. So that was the end of the fantasy...lol Pretty damn cool Luke...wish I had the skill to do it.

@Bylga 11 жыл бұрын

Amazing repair.

@IgkuitBBswm 11 жыл бұрын

Lol, Luke, you make a Consolized MVS and what do you put on it? Ninja freaking Combat, lolol. Great vid as always, man!

@sega94486 11 жыл бұрын

You did a great job man looks nice

@lvpepe38 11 жыл бұрын

Well done Luke

@snakecarlos 9 жыл бұрын

I need a tutorial for dummies!

@jrlepage 11 жыл бұрын

Hey Luke you mentioned that you picked up that encoder originally to build a SuperGun. I had (months back) gotten all ambitious about building one, and have a case and did some legwork on sourcing parts, but the project got shelved. If you ever do build one, I'd love to see video of the process.

@alecjahn 11 жыл бұрын

Well done!

@xaer0knight 11 жыл бұрын

"Ahhh! Hertz Everywhere!" Had to make the pun ^_^

@16BitBrothers 11 жыл бұрын

Brilliant job Luke :-)

@x1ic1x 11 жыл бұрын

Dang it Luke, this makes want to get into arcade cab repairs and collecting lol, do you still go Hard-offing?

@Chuck-RETROGAMECAVE 11 жыл бұрын

A nice thing to see here would have been the encoder and a source to buy them. Just a thought...

@KierinHale 11 жыл бұрын

Nice job mate

@HeathAldrich 11 жыл бұрын

What do you use to power this? I noticed that you aren't running anything off the Jamma connector.

@ashleyholroyd91 11 жыл бұрын

Hi Luke what did you say waya encoder. Where do you get them from. Need 1 for my arcade machine. The moniter has started to go the picture starts to jump up and down then after about 5-10 minutes it will totally brake up. Planing to replace it with an old CRT TV.

@Chuck-RETROGAMECAVE 11 жыл бұрын

Luke, Could you tell me the name of that encoder you used? Sounds like a viable option if its less costly than others like the NEO-\BITZ or JROK

@KingGameReview 11 жыл бұрын

my supergun only has audio in (like to plug in powered pc speakers), ... which is a pain. I want audio out.. :/

@MetalTiger88 11 жыл бұрын

i also would always prefer playing on a candy cab than on a consolized mvs on a tv and an extra power supply laying around and stuff like that but you did a great job for sure =) looks like it is still jamma compatible, am i right? o.o

@xan1242 11 жыл бұрын

I know how it is for you man, I have a messy room myself too lol