CO2 Laser Head Lens Location and Cleaning for AF2028-80 (OMTech)

No video

CO2 Laser Head Lens Location and Cleaning for AF2028-80 (OMTech)

Рет қаралды 4,209

Күн бұрын

The OMTech AF2028-80 80w laser (and similar brands) have a unique laser heads compared to other models.
In this video you will find the stock lens location and learn how to clean it. You will also be shown alternative lenses that can be used as. The new light blue OMTech AF2028-60 and MF2028-100 models may end up having this laser head as well.
OMTECH 5% DISCOUNT: LASERGUYS5OFF or EDMONDSWOODSHOP5OFF
omtechlaser.co...
99% isopropyl alcohol: amzn.to/3NtuQPx
Rubber Gloves: amzn.to/3PjtBVD
Stock 20mm diameter lens w/ 2.5" focal length: amzn.to/43MPIrW
18mm diameter lens w/ 2.0" focal length: amzn.to/3CsIj51
18mm diameter lens w/ 1.5" focal length: amzn.to/3Pjve5H
Amazon Laser Supply Links: amzn.to/3CvWTZy
Personally, I use American Photonics lenses as they have superior quality. Here a list of lenses you may want or need for you laser nozzle. I do have an affiliated discount code for 5% off, LASERGUYS.
20 mm lens w/ 2.5" focal length from American Photonics (Discount code "LASERGUYS")
american-photo...
18 mm lens w/ 2.0" focal length- from American Photonics (Discount Code "Laserguys")
american-photo...
18 mm lens w/ 1.5" focal length- from American Photonics (Discount Code "LASERGUYS)
american-photo...
Need Help? Join my social groups below:
Facebook Polar Users Group: / 573428424122143
Facebook Official OMTech Group: / 1364016877267714
Instagram Page: / edmonds_woodshop
www.laser-guys...
Business Inquires:
Email: Edmondswoodshop@gmail.com
This laser head is mounted on most Monport models as well.

Пікірлер: 10

@jamesalexander5388 Жыл бұрын

Very informative and valuable video. It will help many who are unfamiliar with this laser head. Just for info, the blue ring is a 1/2” spacer. If the owner wishes to use a 2” 20mm lens (normal lens is a 2 1/2” lens), all they need do is remove the blue ring, which will ensure proper focal distance between nozzle tip and material.

@EdmondsWoodshop Жыл бұрын

Thanks Jim. I know you have this laser head setup so I value your first hand experience. Thank you for being a great contribution to the community.

@GS-dx5uq Жыл бұрын

great yt channel! lots of useful information! You have my subscription. I would love to see an episode about setting up a honeycomb table so that it is level everywhere. So that the focal length doesn't vary at any place

@nwmi493 3 ай бұрын

is there a trick to square the head to the table. Ive crashed mine into the x axis a few times due to incorrect ruida parameters and knocked the laser head crooked.

@vrich3733 5 ай бұрын

Great vid thanks! Quick question. When you're reassembling the tube back up into the top locking collar part, is there a measurement setting? Or do I just push it all the way up and lock the tube, or does it even matter? The long tube tells me it's adjustable for a reason. I moved mine without measuring when I was cleaning my lens for the first time. What happens to my focal distance? Thanks in advance! (Oh, I have the black laser head, exactly like the one on your machine.)

@EdmondsWoodshop 5 ай бұрын

The up and down position doesn’t matter. If you have limited Z height and a tall rotary, having the laser nozzle slid all the way up will help you gain additional clearance. The distance that matters it the distance from the tip of your laser nozzle to the top of the work piece. This is called your focal distance and is established when you do a ramp test (shown on another one of my videos). I’ve made myself some focal gauge to manually set my focal distance as I found that the stock focal gauges were a bit off.

@vrich3733 5 ай бұрын

Awesome thank you. Yes my FD was off some too. Thanks for the great vids!

@jasmincruz2211 11 ай бұрын

I have the af 2028 80 watt and my mirror is in the red upper part of the tube not close to the tip should I remove the spacer? Also should I stick the red tube part on top all the way back in?

@johnreno891 Жыл бұрын

I moved my laser from my business to my garage. its a 28 x 24 100 watt. I too co2 tube out for move. Now the laser line it too big and it can get though 1/4 ply and it throws red sparks when cutting material. Checked and adjusted all mirrors and pulsed cutter and it is in center co2 tube is new. Help

@EdmondsWoodshop Жыл бұрын

Unfortunately KZfaq comments isn’t the platform for effective help. I recommend joining our Facebook group. The link is in the description. Make a post with pictures and videos and we can help you there. If a line is too thick that generally means you’re out of focus. You need to properly set your focal length. Depending on your material, sparks can be normal as well.