Cody's Epic Fail Exposed by Subscribers

Рет қаралды 62,050

Ай бұрын

Wranglerstar PROhO Merch - wranglerstarmerch.com
In this eye-opening episode, join me, Cody, aka Wranglerstar, as I face the music and own up to a massive blunder in my recent project - the Birch Bark Lockers. While constructing these rustic beauties, I made a critical error: installing the piano hinges incorrectly. My eagle-eyed subscribers didn't hesitate to call me out on it, and now, it's time for some serious damage control.
But fear not! Instead of wallowing in defeat, I've decided to turn this setback into an opportunity for innovation. Watch as I brainstorm and implement a brilliant fix to reinforce the locker bench, utilizing the very same piano hinges that caused the initial problem. It's a testament to resilience, problem-solving, and the unwavering support of the Wranglerstar community.
Join me on this journey of redemption as I transform a colossal mistake into a triumph of craftsmanship. Don't miss out on the valuable lessons learned and the satisfaction of seeing a project rise from the ashes. Tune in now and witness Wranglerstar's resilience in action!
Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-merch - wranglerstarmerch.com preorder by may 17!
-Jk Boots - www.jkboots.com/wranglerstar
-Radios Made Easy - radiomadeeasy.com/product/wra...
-Amsoil - www.amsoil.com/c/products/1/?...
-GoDark Bags - godarkbags.com/#cody411
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com/r.cfm?b=228804...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystems.com/wranglerstar
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar

Пікірлер: 279

@wranglerstar Ай бұрын

Wranglerstar PROhO Merch - wranglerstarmerch.com

@joshuag7604 Ай бұрын

When I seen the thumbnail my first thought was a question I was worried about a few days ago. As a master plumber who owns his own business and has been doing it for 22 years, I was wondering why there was no plumbing in the slab for the cozy cabin project. Still one of my thoughts when I see you upload. No plumbing in the cabin doesn't make sense bc I seen you ran water for it. Maybe you didn't film it or maybe I missed it but it has worried me since the last cabin video. Hope all is well, enjoy your videos. From an East Tennessee Farmer- I wish the best for everything.

@plaid13 Ай бұрын

For the finish on something like that it should be kept real light colored so maybe just a clear poly. If you stain it or use an oil finish of some sort it will darken a bit and that will make each area darker. Ideally just want it very waterproof and bright.

@Carter-dv4hz Ай бұрын

I think you should leave it unfinished. It is inside and really doesn't need anything further.

@retiredafce3373 Ай бұрын

The Man Cave

@johnnyvt9 10 күн бұрын

Tennessee is God's country, but it is beautiful where you live. I don't know if I could say enough good things about you sir. Thank you for the videos you make. Keep doing what you are doing sir. You inspire many ideas for my wife and I.

@markallen8027 Ай бұрын

for added strength for supporting more weight, you can put a vertical support under the back of each of those styles, transferring the weight to the floor, rather than to the glue and pin-nails.

@mordredthehero Ай бұрын

Just something I noticed: before you removed the shelves, you could have marked where they were. Then when you put them back you wouldn't need to re-level them, doing work you've already done.

@williamjaggers5569 Ай бұрын

Pocket holes are a cabinet makers friend (construction grade cabinets)

@RatyTang Ай бұрын

Not sure if this was sarcasm

@williamjaggers5569 Ай бұрын

@@RatyTang it isn’t.

@TLLConline Ай бұрын

Looking forward to receiving my shirt. I've only ever subscribed to, and bought branded merch from 2 channels. Yours (I'm pretty sure I've been a member since day one), and the Taofledermaus channel because it helped my Dad (Danny). Glad you're sticking with American made and small business products. God bless you Cody, keep it up.

@ryangriffith1500 Ай бұрын

R.i.p. Danny! Sorry for your loss. It was a big shock when he passed. I've not been effected by the loss of a youtuber like i was with Danny.

@TLLConline Ай бұрын

@@ryangriffith1500 I'm just glad I can go back and watch his videos when I miss hearing his voice. Thank you for the kind words.

@wranglerstar Ай бұрын

Awesome! Thank you!

@jokeal3613 Ай бұрын

There are two holes on the Kreg jig so you can mount it once and drill two holes for a face frame without having to move it.

@Sam_T2000 Ай бұрын

Craig*

@dfriedbauer Ай бұрын

@@Sam_T2000 *Kreg

@Sam_T2000 Ай бұрын

@@dfriedbauer - Craig Johnson*

@texas15013 Ай бұрын

⁠⁠@@Sam_T2000 Craig Sommerfield* invented the Kreg jig lol

@Sam_T2000 Ай бұрын

@@texas15013 - that’s a myth, like Edison inventing the incandescent bulb.

@bobbannon2701 Ай бұрын

Thinking this would work really well in a race trailer as well. If you like the raw look of the birch plywood, satin water based polyurethane would be a good choice. Recommend thinning the last coat 50/50 with water for an even finish. I’ve also had really good results spraying it thinned out (HVLP).

@JohnWilson-cn2ru Ай бұрын

Needs memory foam padding. It will hide the hinges. ; )

@user-sd9kz6sr9l Ай бұрын

Love how your fans help with solutions to such a nice finished product! Love to see your creations to your specific needs. This is so stimulating. Inspiring to do more for my specific creations.

@BattleChemist Ай бұрын

Your Blood, Sweat, and Tears are valued and appreciated, Cody. The community you've brought together around the channel has become an amazing force for good in the world and something to be proud of. Thank you for sharing and putting in the effort for the quality content. I'm looking forward to a trip to meet up with Overton and Evan Roach later this month for a Montana ride; maybe reach out to him to see if you can join us?

@c.a.g.1977 Ай бұрын

Maybe just a clear poly? I actually like the look of baltic birch, also the end grain part. Very insightful monologue at the end, Cody! Thank you!

@collinsmith9941 Ай бұрын

Pocket screws are almost an absolute necessity for projects like your lockers. Good advice and a good solution for the seat “weak point “ Anyone who has tried to forcibly disassemble a piano hinge knows it’s pretty dang strong.

@MurfsKitchen Ай бұрын

I think “cleat” is probably the word you’re looking for. +1 for the Kreg pocket jig; one of the best purchases I’ve ever made.

@LivingWithDragon Ай бұрын

My vote for a finish on the new cabinets would be a light stain or even just a clearcoat so you can enjoy the edges of that Baltic birch plywood.

@jacobwalsh4979 Ай бұрын

Those support strips are called cleats. That was an elegant solution.

@Burdolski_75 Ай бұрын

Hell yeah!! Always delivers fun content

@begoodbroadcast Ай бұрын

From L to W in 6 sticks. Nice work Cody. Let's go ProHo.

@user-yb9pb8rf8x Ай бұрын

Cody, What a great project. And yes, it shows in your work that you immerse yourself. The segment on the Craig Jig has sold me. So thank you for all you do. I look forward to watching your channel.

@699hazard Ай бұрын

Looking great Cody! Some power outlets in each bay would be great for charging your devices that you need for your bike

@watchthe1369 Ай бұрын

I saw the piano hinges and thought nothing of it. They have always been either end or stap mount style. I agree the seats are a bit weak, I was thinking that for another thing I would do to strengthen things.

@jtr1234 Ай бұрын

Use the total boat halcyon! Spray 3 coats, incredibly durable and will look sharp

@Kipperbob Ай бұрын

I saw that and said nothing, because I'm a carpenter and I know you're not, one little tip if you ever really need to screw into the edge of ply, predrill a hole and dip your screws in glue, only if you really need to.

@obfuscateidentity2329 Ай бұрын

Great tip

@user-fe7ii3eo9r Ай бұрын

Great job on your cabinets. I would be proud to have them in my shop. I am proud of you and all your work. I can see your effort to make quality content for us. We appreciate you and your family.

@jwsystems Ай бұрын

Izzy Swan finish is my go to. By volume - 30% spar urethane and 70% teak oil, let it sit for 15 minutes and wipe off extra. It darkens the wood a little bit, but is long lasting and pretty tough. It penetrates into to the wood and is very durable.

@nell5871 Ай бұрын

The fix is in!! Love your humility!!

@brianleya9072 Ай бұрын

Always love a good build video. Thankyou sir

@outdoors-fun Ай бұрын

I believe Hemmingway touched on the meaning of that quote. "Bleeding means revealing what others cannot see, what they have never seen, and what you might be afraid to see. You must not be afraid to be vulnerable."

@Shane_O Ай бұрын

Odies oil finish is generally what I use for most projects these days or Osmo oils are good durable finish

@Hogiewan1 Ай бұрын

I am about your age and have recently found you here. I really enjoy the videos. I did my senior paper on Hemingway, so I immediately got the reference...

@tylerdaavettila5148 Ай бұрын

Former hockey player/current Moto rider. I like the use of these lockers for sure, if you’re putting wet gear in the bottom though your shop will smell of a hockey locker room. Commonly in hockey locker rooms there’s a fan blowing on the gear to dry it before storage.

@jeffselchow5719 Ай бұрын

I have built many cabinets with Kreg screws, even had 1 fall out of the back of my truck on the way to install at clients home, screws held, wood broke.

@swarbrickjesse Ай бұрын

I could listen to you talk all day man. Thank you for what you do.

@tonysherwood9619 Ай бұрын

Turn the whole thing upside down - it'll work then!

@mrtrack54 Ай бұрын

Cody, this is why you’re one of the best homesteader channels on this platform. Your humility to admit when you’re “wrong”, provide context for why you did what you did and how you go about fixing it, is second to none. This is true pROhO. I’m 30, and am looking to be moving out of Denver (liberal hell hole) and the last 10 years of watching your channel has set me up for success. Keep on keepin on! #PrOhO #Homestead #Wranglerstar

@ianbutler1983 Ай бұрын

You call that a massive blunder? You should come here and work with me on a project. I'll show you a blunder.

@willb3018 Ай бұрын

Same. He could tour the country the rest of his life an barely see a fraction of ProHo blunders.......but iy be some fun content.😂

@sociopathmercenary Ай бұрын

I grew up in a house where a elementary school principal added an addition. Unknown to us until a fatefully cold Thanksgiving, he framed the fireplace box with lumber which was faced with bricks. After several hours of a roaring fire, smoke started pouring out around the mantle. My Dad bashed holes in the fireplace with a sledgehammer while I was in charge of spraying water in the holes. 😂

@PRACTICALCIVILIAN Ай бұрын

Those pieces used to support the lids are called ‘cleats.’

@mattnewton3854 Ай бұрын

I’ve made these before and I still place those seat supports regardless of hinge placement. So no big deal there! You may want some sort of screen to cover that vent space to keep the mice out.

@MrLandphill Ай бұрын

Great video as always, thanks for sharing such great content.

@willhikearizona Ай бұрын

Love the Hemingway comments. You should take Mrs W and go see Hemingway's house in Key West. It is fascinating the history there. It's a museum now.

@jimdomoradzki3309 20 күн бұрын

Predrill the endgrain so you can put the piano hinge screws in without splitting it. How fitting a quote from Hemingway who committed suicide that possibly regards stress.

@garrettm949 22 күн бұрын

Cody, we need to get you on the festool band wagon. As a purveyor of the best tools you can buy, I think you’d really appreciate the quality. German engineering. And they promise a 48hr turn around for repairs from their service center in Wisconsin. As someone who gets paid for building things, it has changed the game. Plus I know you will love their Systainer containers. For what it’s worth, I am not affiliated with Festool whatsoever.

@buckfarmer5354 Ай бұрын

I'm not lockstep with your worldview but your authenticity and artistry are superb. Love the Hemingway metaphor and the vulnerability of your expression.

@Conan3145 Ай бұрын

Add a few air holes in seat boxes? Finish the unit with BLO. Thanks for another great video.

@brandonrivera3224 Ай бұрын

Im a custom cabinet builder and do these all the time. You don't need support on the sides. Only on the back (3/4 x 3 x L) glued and screwed to the underside of the top extending 3/4 into the lid section.

@negativerush Ай бұрын

With the pocket screw kit. If you use a longer drill bit you can use dowls and glue for expose joints to add accent.

@dwoodog Ай бұрын

Looks good, very satisfying wood working in a cabinetry form. As far as the finish goes, I would stay away from any polyurethane, 2 in one type stains. Going the wipe on stain, then lacquer coat is a lot of work. I think I would get a HVLP sprayer and just do a lacquer coat, sand with 320 grit, then a second coat, and call it done.

@Sometungsten Ай бұрын

I concur with the load bearing observations. I used to make products like this and priority one was always point loading to support human weight; likewise if the purpose was to support significant weight like a large CRT television. I would not rely on end grain screws, even though that would be modestly stronger.

@ericturner2477 Ай бұрын

If it's any consolation, the support issue would be the same if you had screwed the hinges into the end grain.

@bigptm1364 Ай бұрын

More than once, I've seen this man admit when he's wrong. Having the ability to admits ones wrongs or apologize for mishaps is a characteristic thats a must for me to trust a man or woman... Accountability, self-awareness, humility, and being open-minded are as important as they are rare in people today.

@EverythingWithEric Ай бұрын

Looks great! How about a walnut finish for contrast against the wall?

@watchthe1369 Ай бұрын

That little brad gun sounds like an old cash register without the ring.

@monkeyman8265 Ай бұрын

A little tip with the pocket holes after you drill the hole running the drill back through one more time and you’ll get cleaner holes.

@purplerays6 Ай бұрын

My hat is off to you. Not too many people will put themselves out there like you do. Keep showing it all, the good and the bad.

@logankowalyk2580 Ай бұрын

The way you make videos is perfect. The sounds, the edits the commentary. Its perfect

@wranglerstar Ай бұрын

Thank you, Logan,

@maxbradley9534 Ай бұрын

I think your strengthening improvement there is a very good choice, that will hold up well. I can see people standing on those seats to look up on the top shelf if they are not as tall as you are and with your new addition they will be able to do this. I do think though that you need more ventilation in the cubbies than what you have. Very little air will get up through that gap due to its location. You need to allow air to pass through all the cubbies and out the other side. So I would have a vent on each end of the unit that passes through from one cubby to the next and out the far side. But that is always something you can add later if you find you need it. Great work and as for the finish I'm undecided on more USFS green or good old fashioned linseed oil. Leaning towards the paint as it will be easier to wipe down when needed.

@Sam_T2000 Ай бұрын

I think I would’ve done the same with the hinges… wouldn’t the screw likely split the plies, and only be supported by glue?

@simonthebroken9691 Ай бұрын

It isn't going down a mine shaft with a flashlight. It's still work, though. And work is work.

@kermitfrog8340 Ай бұрын

As a former cabinet maker and furniture factory worker for strength you made the right choice you could go into end grain if you pre drill and use longer screws. Back in the day most kitchen cabinets were made of plywood. Nice project!

@nothingtoshow8337 Ай бұрын

Very Well Said.... We Learn Together ! Lets Goooo

@TokyoCraftsman Ай бұрын

Yeah, I have a Kreg pocket hole jig that is so old it's made from Aluminium LOL, they rock! Oh, and it's a Robertson, not square drive!

@marcmmclellan Ай бұрын

No one believes you don’t work and put in everything. You could literally hire a camera crew that would have a full time job! You do it all. Come up with the content (what you are into is always the best), do the project, film the project, edit the video, publish the video, and finally deal with the haters!

@jamesoncross7494 Ай бұрын

As a carpenter, I never like piano hinges. They always seem to rust. I live in the northeast where it is very humid in the summer.

@poormansclaim9131 Ай бұрын

I like the idea of a shellac, that way you can touch it up later if you want.

@TheMitchyevans Ай бұрын

I would like to recommend "The Creative Act: A Way of Being" by Rick Rubin in response to your thoughtful take on putting work out into the world. You've contributed a lot to my life; and while I'm sure I criticize you on my own at times, the work you put out continues to add value - so obviously keep it up and thank you for sharing the results of your labor with us. It's a creative and generous act.

@MiCamping Ай бұрын

I wish some of the merch that I sold by creators were in tall sizes as well. And also I agree with your sentiment about the Kreg jig, excellent design.

@TXDSGMACH Ай бұрын

Good to see someone using Patagucci for actual activity

@robohonkey990 Ай бұрын

Thank you for sharing your wisdom and work with us.

@26frenzy Ай бұрын

I would get new material for the lids and install the hinges the other way because you would have a cleaner interior cabinet and exterior look and no chance for the lids to collapse with hinges screwed into end grain . Keep the old material for a different project .

@jpwallace2000 Ай бұрын

Two best ways to learn. From your own mistakes and the best of us learn from others mistakes.

@golfincroc8473 Ай бұрын

Nice lockers and now with the supports you could do away with the piano hinge just drill a finger lift hole in the seat and you could then just fill and patch the screw holes from the piano hinge if you wanted a even cleaner look. If you want you could put a small ledger across the back. And I also have a track saw and I built a carry box for the track and parts I can send you pictures of it if you want Cody.

@smokey3333ful Ай бұрын

Love your dry and blunt humor. Stay in it!

@wranglerstar Ай бұрын

Thanks! Will do!

@butlerdawgs78 Ай бұрын

Ever think about those portable boot dryers for your moto boots?

@aaronoosterhoff5449 Ай бұрын

if you do the hinge hidden the screws would be in sheer, thats why its stronger almost wouldnt need to add support

@JayTapps 11 күн бұрын

Also, the black bullet coffee, goooud for a cold start.

@darkace256 Ай бұрын

Forest service green, with marsh stencil names.

@brumby92 Ай бұрын

Yeah i installed the piano hinge backwards on the corner cupboard. Great cheap and versatile hinge. Installing into endgrain. Yuck. No. But if it was intended to be a bench seat it was certainly an oversight. I enjoy the process.

@gdp5251 Ай бұрын

The shelf is hinged but that man is unhinged

@tatiananaugolnykh Ай бұрын

What is the strongest wood glue???

@lidlett9883 Ай бұрын

Cody that would be called a cleat

@Subsilent00 Ай бұрын

Everything in this world is porous, including the firmament itself. How else did my soul get through? When I say, "Mentor," it's wholeheartedly for you, Sir! I favor the varnish looks!

@alexb1638 Ай бұрын

Looks awesome! My only thought is air flow for the under-seat storage. Maybe some small vents in the face would be cool for your sweaty stinky gear.

@DefensorFortis Ай бұрын

Ana White has a ton of kreg projects and free plans online. Making assembly simpler for the common homeowner is a great thing.

@fredkk79 Ай бұрын

May want to put some plastic under the base to separate from moisture from the concrete

@SqueamishPuppet Ай бұрын

Cody, you are very passionate about what you do, and it brings you joy. Dont worry so much about what others think. Take the criticism as learning but not attach the emotion.

@njb7209 Ай бұрын

Good save on the seat supports.❤

@HickoryHillside Ай бұрын

Thanks for the follow-up video on a less than ideal project. Kudos.

@MichaelMoore-zn3ql Ай бұрын

Nice fix. I am new to woodworking and carpentry. So many different ways to create and complete a project. Thanks WStar.

@paulie-Gualtieri. Ай бұрын

The additional improvements will add to the longevity of a useful and functional piece.

@ManInTheWoods76 Ай бұрын

We're here for you, sir. We're real though expressing digitally back to you. And as father of more than a couple great young men and women, let me tell you this: I've had a lot of adventures, taught many men and served the public in extraordinary ways. The resume is large. But you must know the profound impact and value you have on many young men. It's obvious and of immense value. Certainly you know this. So, as a digital reminder, know that you are a brave piper leading not rats to destruction but men to greatness. That should not be extraordinary in a great society; it ought to be common. But it is stellar because you pipe courageously when so few do in this collapsing culture. From all of us, a sincere thank you.

@kevinhornbuckle Ай бұрын

I think your hinge work-around is better than shooting screws into end grain.

@polhokustaa4989 Ай бұрын

I really like your work! Greetings from Finland!

@infosec_mike Ай бұрын

I recently built a shelf using the same exact wood. The concerns about the end grain are real.

@setdown2 Ай бұрын

End grain with B.B.Plywood just pre drill…no problem and you hide the apprentice oversight…he wants to walk the line so keep him on it…no pandering…

@sociopathmercenary Ай бұрын

The only concerns would be with pull out and all the force is going to be lateral on the screws so he shouldn't have a problem.

@nosadonions3231 Ай бұрын

I like it, gives it the rustic feel

@josephkerley363 Ай бұрын

Thank you. And to paraphrase Winston Churchill: Never give up and never give in.

@aubreygrove2455 Ай бұрын

That sir was a great fix, and a lesson well learned. You switch horses in the middle of the stream like a pro, John Wayne would be proud. Keep up the good work.

@billylee2312 Ай бұрын

It’s always easy to see others mistakes but not quite as easy to see our own mistakes.

@BarryHull Ай бұрын

Cody, thank goodness you gave yourself extra space with those shelves. I've been worried sick they would grab your toupée.

@nmilleson88 Ай бұрын

You best described why I've never posted a single intimate thing, as well as why I appreciate you a lot Cody. God bless you and your family. You're a light in the dark night. For some of us you are the reason us millennials differentiate between boomers and X'ers. Birch.... how dare you!

@VinnieRed71 Ай бұрын

What? No Loctite on those screws! What a Philestine!

@Unit13FREMSLT Ай бұрын

The layers of ply will split in no time on the end grain. At the mill shop if we wanted to put hinges on ply we would do a glue up with solid wood stock on the end that called for hinges and connect to that. It works well. You can use biscuits, a spline or tongue and groove for more glue up surface area. Your solution with the cleats is perfect. I would have beveled/chamfered the bottom of them that way there wouldn't be a 90 degree angle to catch things. There are two kinds of critics, the one who would never move beyond the fear to do something yet feel compelled to tell others what they've done wrong backed up with no experience. Then there are the critics who have words of wisdom gained by experience whos motivation is lifting others up. Love your channel and content!