Here is the link to the 3D printer file for the bolt. www.stlfinder.com/model/lh-un... Thread size: 1/2-13UNC (13 threads per inch)
Пікірлер: 42
@colchilibeck Жыл бұрын
Someone made a bolt specifically for this. Check it out here: www.thingiverse.com/thing:5914954
@manfredstrappen7491Ай бұрын
“Someone” who makes these should sell them.
@definingadventureАй бұрын
I am that someone and I do.
@ps429 Жыл бұрын
I'd add a section of clear plastic hose for a better more comfortable grip on the rope.
@ZillaYT9 ай бұрын
1up should learn from this vid and have that feature built in.
@skellener4 ай бұрын
Just used your hack for my rack! Thank you very much! So much better now!
@DM3thousand9 ай бұрын
I did the same and used an old, worn-out lock-on (bicycle handlebar) grip as a handle.
@MichaelEngel-pv6in3 ай бұрын
i love the simplicity ,would probably add a tube type handle, & would hope that you would consider selling the 1/2" 13 plastic 3D printed rope savers ? ?
@industrialcomfort Жыл бұрын
Really nice job. Sort of a joke 1up just doesn’t make their racks with the Ezpull included.
@jacksonlee5117 Жыл бұрын
Equip D has it included
@dpnelson3122 күн бұрын
This was very helpful, thank you! I ended up doing this with several layers of heat shrink wrap instead of the hollow bolts. If you are willing to print and sell the 3D printed bolts, I would be happy to buy them from you.
@pennigladstone21056 ай бұрын
Great idea cuz I have to bend down and pull and often it’s uneven. A real pain
@thisishowiedewitt76 Жыл бұрын
What’s the thread pattern/ pitch on those 3D printed bolts?
@kennethkuhlman8864 Жыл бұрын
Oh man I had the same idea. Nice.
@kimromen1304 Жыл бұрын
I just got the 4 bike rack with the add on extension bar from 1Up. I'm so unhappy with it I'm thinking of returning it. My thumb got stuck under the extension bar 4 xs-very painful and if someone hadn't been there I wouldn't have been able to get my thumb out. 2 men and myself struggled quite a lot trying to get it to pull up so that we could put the rack into a different position. I saw some other videos of people struggling a bit, too, and 1 video where someone really has a hard time with lots of weight. Anyone else have this problem? I'm amazed that you can get it to pull up just with that rope! maybe that's even better than 1Up's extension because the poles aren't perfectly straight, surprisingly. Not sure if that has something to do with it, however 1 other youttuber had a hard time opening it without the extension bar, saying they had to try several xs, needing to get it just right. Is your system still working out now? thx
@hyphymtb11 ай бұрын
Does your trunk fullu open with the rack down on? Also do you have a video of that?
@chrislj28902 жыл бұрын
Brilliant !!! 👍👍👍
@nickbritt Жыл бұрын
This is great Chris I ended up using your design to make my own. No more bruises on my arms! I didn’t print the design I just purchased a large set of nylon nuts and bolts.
@colchilibeck Жыл бұрын
Great! Where did you get the nylon bolts?
@nickbritt Жыл бұрын
@@colchilibeck Amazon
@colchilibeck Жыл бұрын
@@nickbritt Could you post a link to the bolts for others?
@jaron808 Жыл бұрын
@@nickbritt link please :)
@stevewallen2303 Жыл бұрын
@@jaron808 Hi, did you happen to have the link or details for the nylon bolts and nuts you got? Thanks
@lllukiosas594 ай бұрын
Instead of 3D printing just go to Homedepot, walk over to the bathroom section and pick up a pair of toilet 1/2” nylon bolts drill a hole and you have a perfect fit “specialty” bolt.
@dcarlisle1239 ай бұрын
Dude, nice MacGyver
@donnasulzman6591Ай бұрын
Colin, I had 2 bolts made using the download. But it appears the threads are the wrong thread. Any suggestions as I have called 1UP and asked if they discounted the EZpull since it was an issue with their design. They were extremely rude and arrogant. How did you get the bolt to fit?
@miscstuff1391 Жыл бұрын
Brilliant. So simple. Not really a big need for plastic bolts. Just make another one when the rope frays too much. Or stuff/twist in a piece of thin walled flexible tubing in the threaded hole and fish the rope through might work. Great idea. Thanks
@jacksonlee5117 Жыл бұрын
Hi Colin the 3d printed bolt isn't hollow right? So I would still need to drill a hole correct?
@colchilibeck Жыл бұрын
www.thingiverse.com/thing:5914954 Check that out!
@Rnads2 жыл бұрын
Mind sharing the STL files you used to 3D print the bolts?
Looking to get the 1 up. this won't work if you have add an additional tray, correct?
@kristenb7380Ай бұрын
It should still work since each tray should have those same holes, because you can add trays to have 4 total
@manfredstrappen7491Ай бұрын
Why 1Up can’t realize that when there multiple videos of people solving a poor design that maybe they should make a decent, simple mechanism standard is the bigger mystery.
@mjd41242 жыл бұрын
anybody know what the thread is for the plastic nuts?
@colchilibeck2 жыл бұрын
1/2-13UNC (13 threads per inch)
@lllukiosas594 ай бұрын
Stop calling Zip-Ties…”Zap-Traps” 🤦
@honestnewsnet Жыл бұрын
Zip straps?
@colchilibeck Жыл бұрын
Are you asking what they are?
@snowsue197311 ай бұрын
I can't find the tiny zap straps on Amazon -what are they and where can I get some? Thanks!