add some refrigerator water haa

Well, during summer, when it's anywhere over 25C and especially where it's over 35, even getting 18C water available in any kind of bulk is the difference between unbearable and bearable tbh. Putting it in a fridge is an option, but regularly opening and closing that will cost you, both in cooling potential and electricity. I made one with 2 old integrated water loops like the Corsair H70's, but the ones I used originally came with Amd FX-8150s. 1 on the hot side of the TEC with the radiators from both tubed to it, the other with the tubes going to a 5 liter water jug. These integrated watercoolers have a pump integrated in their heatsink, making it really easy using two of the same cooler to put some good contact pressure on the TEC and insulate the shit out of all of it. I added a 5$ Arduino knockoff to the mix to switch the system on and of at a settable temperature.

I think insulating the container in polystyrene foam board may cut the cooling time.

12706 is a weak chip

Can you tell the exact timing for cooling this from 34 to 5 degree celsius ?

Yes u r absolutly right

*rolls eyes. you can always use UV resin and a copper heatsink you dork.

@@multiomer1997 Soda cans have a polymer or epoxy lining on the inside. Everyone knows that.

PVC solvent is fine for drinkable water.

Shailesh Yadav

Bhai yeh freezer banane ke product kaha se purchase kare

thanks nafice.

Hello sir did you make it? Can you share to us? Badly need😢

ateeq rehman Go to link given in description.

ateeq rehman if you live in rawalpindi then go to college road

It is available on ebay

R J they have stuff like this already out

wow i haven't seen such stuff. any links to online portal would be great to have

around $25

thanks

Links of all parts given in description.

yes you can use any size

thanks

Thanks

Debarpan Saha lol good one bro

Debarpan Saha three

haha he has 4 has he didn't use the one yet. nice video bro.

Hahahahahah

parts ka link description me hai.

the cold and hot sides depend on the polarity of the current applied

Akshansh Kumar -sir , actually my fridge peltier is not working and that peltier model is tes1-12074 an that model is too costlier on Amazon or very availability . so can I use tec1-12074 instead of tes1-12074 . and which one is better?

hitesh sharma yes you can use it, they are more or less the same thing, just manufacturer differs

Akshansh Kumar ok that means the performance of both peltier are same only manufacturers are different . thank you so much for helping me

hitesh sharma yes, and your​ welcome

cooler cost RS

depend on your use According to my experience it will last for 2-3 yrs easily if u use daily

Anmol Sharma Apne ye product banaya h to pls Coll me 8178227193

Anmol Sharma mera bhi wahi ho raha hai

12 volt 10amp , if you use peltier 12706/03/05/upto 10

deepak bhushan you can use 1k OHM for LED

1k ohm is right.

Rahul Anand that heatsink is taken off a gigabyte motherboard