Coleman BT200X Mini Bike Performance Parts, Build, predator 224 Ghost 212cc Part 2

Рет қаралды 232,186

Жыл бұрын

Coleman BT200X CT200U CT200U EX
I installed the Harbor Freight Predator 224cc Max Performance engine.
Andy installed the Predator 212cc Ghost engine in his mini bike.
In the previous video we installed performance parts including exhaust, VM22 Mikuni carb clone install and carb tuning jetting, I even installed a CVT but the stock engines that comes in the BT200X ( Hisun 196cc clone engine ) isn’t as durable with the smaller 5/8” crack shaft.
We found this out after modifying them, they definitely have some limitations.
We won’t be doing a review of the Coleman mini bike in this video but we will definitely do some performance mods and a lot of mini bike riding.
𝙊𝙩𝙝𝙚𝙧 𝘾𝙝𝙖𝙣𝙣𝙚𝙡𝙨 𝙖𝙣𝙙 𝙑𝙞𝙙𝙚𝙤𝙨 𝙩𝙤 𝘾𝙝𝙚𝙘𝙠 𝙤𝙪𝙩:
Okaybuilds / okaybuilds
𝙋𝙖𝙞𝙙 𝘼𝙛𝙛𝙞𝙡𝙞𝙖𝙩𝙚 𝙇𝙞𝙣𝙠𝙨 𝘽𝙚𝙡𝙤𝙬
Save 5% on HTP products including Super flex hoses! Use the 𝙈𝙄𝙆𝙀𝙁𝙀𝙎𝙏𝙄𝙑𝘼 Promo code!
Super Flex 12 foot hose and #17 Fits Hynade 200 TIG and Yeswelder 250P TIG
usaweld.com/collections/lotos...
Vulcan PROTIG 205 Super flex hose and #17 torch from HTP usaweld.com/collections/vulca...
𝙏𝙝𝙞𝙨 𝙞𝙨 𝙩𝙝𝙚 𝘾𝙧𝙤𝙨𝙨𝙛𝙞𝙧𝙚 𝘾𝙉𝘾 𝙥𝙡𝙖𝙨𝙢𝙖 𝙩𝙖𝙗𝙡𝙚 𝙛𝙧𝙤𝙢 𝙇𝙖𝙣𝙜𝙢𝙪𝙞𝙧 𝙨𝙮𝙨𝙩𝙚𝙢𝙨
Here’s an affiliate link to the Crossfire website if you are interested in checking out the table
store.langmuirsystems.com/?aff=16
Don’t forget to use the promo code 𝙈𝙄𝙆𝙀𝙁𝙀𝙎𝙏𝙄𝙑𝘼 this will save you $100 at checkout on the table!
𝐇𝐞𝐫𝐞’𝐬 𝐚 𝐩𝐚𝐢𝐝 𝐚𝐟𝐟𝐢𝐥𝐢𝐚𝐭𝐞 𝐥𝐢𝐧𝐤 𝐭𝐨 𝐘𝐞𝐬𝐰𝐞𝐥𝐝𝐞𝐫 𝐰𝐞𝐛𝐬𝐢𝐭𝐞
YESWELDER LINK: yeswelder.com/?ref=s6nzvjxbwejy
SAVE 10% Use Promo code 𝗠𝗜𝗞𝗘𝗙𝗘𝗦𝗧𝗜𝗩𝗔 and it helps me out a little bit too 👍
𝙎𝙖𝙫𝙚 5% 𝙤𝙣 𝙀𝙫𝙤𝙡𝙪𝙩𝙞𝙤𝙣 𝙨𝙖𝙬𝙨 𝙤𝙧 𝙤𝙩𝙝𝙚𝙧 𝙀𝙫𝙤𝙡𝙪𝙩𝙞𝙤𝙣 𝙥𝙤𝙬𝙚𝙧 𝙩𝙤𝙤𝙡𝙨 use the 𝙁𝙀𝙎𝙏𝙄𝙑𝘼5 Promo code and save yourself 5% Link Below to Evolution, I'm using the S380CPS metal chop saw.
aspireiq.go2cloud.org/aff_c?of...
𝘼𝙢𝙖𝙯𝙤𝙣 𝙋𝙖𝙞𝙙 𝘼𝙛𝙛𝙞𝙡𝙞𝙖𝙩𝙚 𝙇𝙞𝙣𝙠𝙨 𝘽𝙚𝙡𝙤𝙬
Use the Hynade Amazon *Promo code 05𝙈𝙄𝙆𝙀𝙒𝙀𝙇𝘿 at checkout and save 5% on Welders and accessories
Hynade CNC Blow back piolot arc 60 amp Plasma plug and play for CNC amzn.to/3ixzw7I
Hynade 200 Amp AC/DC Tig welder with Pulse amzn.to/3MiAL7v
Good affordable plasma cutter Hynade Plasma Cutter, 35Amps 110V amzn.to/3L1YYis
Hynade Flux Core Gasless Mig Wire- amzn.to/35KX9XC
Led 2PCS 4.5" 27w 3000LM Round Flood Light amzn.to/3Mm6On1
GO-KART Torque Converter amzn.to/37vgNrz
Crank Shaft Sleeve Adapter Pulley amzn.to/3xD3uju
Go Kart Drive Belt amzn.to/3jTOUfk
Racing Performance Mikuni Carburetor Carb amzn.to/3uYGdqi
45 Degree Elbow | 1 Inch Tube OD Stainless Steel 304 Pipe Fitting amzn.to/3JZxWGY
𝙄𝙛 𝙮𝙤𝙪𝙧 𝙞𝙣𝙩𝙚𝙧𝙚𝙨𝙩𝙚𝙙 𝙞𝙣 𝙩𝙝𝙚 𝙆𝙚𝙞 𝙏𝙧𝙪𝙘𝙠𝙨 𝙘𝙝𝙚𝙘𝙠 𝙤𝙪𝙩 𝙢𝙮 𝙨𝙚𝙧𝙞𝙚𝙨:
Buying a Suzuki carry Kei truck part 1 • Buying a JDM Suzuki Ca...
Buying a Suzuki Carry part 2 • Suzuki Carry JDM 4x4 K...
Buying a Honda Acty Attack Kei truck • Buying a JDM kei truck...
Building a ladder rack for a Kei truck • Suzuki Carry JDM 4x4 k...
𝙄𝙛 𝙮𝙤𝙪𝙧 𝙣𝙚𝙬 𝙩𝙤 𝙤𝙧 𝙞𝙣𝙩𝙚𝙧𝙚𝙨𝙩𝙚𝙙 𝙞𝙣 𝙬𝙚𝙡𝙙𝙞𝙣𝙜 𝙘𝙝𝙚𝙘𝙠 𝙤𝙪𝙩 𝙢𝙮 𝙫𝙞𝙙𝙚𝙤𝙨
How to weld, Tips for Beginners • How to weld, Tips for ...
Learning how to TIG weld made easy • Learning how to TIG we...
𝐒𝐮𝐩𝐩𝐨𝐫𝐭 𝐦𝐲 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐛𝐲 𝐩𝐢𝐜𝐤𝐢𝐧𝐠 𝐮𝐩 𝐚 𝐓-𝐬𝐡𝐢𝐫𝐭 𝐨𝐫 𝐒𝐰𝐞𝐚𝐭𝐬𝐡𝐢𝐫𝐭:
mike-festiva-3.creator-spring...
Thank you in advance!!!
** 𝐃𝐢𝐬𝐜𝐥𝐚𝐢𝐦𝐞𝐫 **
𝐖𝐞𝐥𝐝𝐢𝐧𝐠 𝐚𝐧𝐝 𝐅𝐚𝐛𝐫𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐜𝐚𝐧 𝐛𝐞 𝐝𝐚𝐧𝐠𝐞𝐫𝐨𝐮𝐬.
𝐘𝐨𝐮 𝐬𝐡𝐨𝐮𝐥𝐝 𝐬𝐞𝐞𝐤 𝐨𝐮𝐭 𝐚𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥 𝐢𝐧𝐟𝐨𝐫𝐦𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐮𝐧𝐝𝐞𝐫𝐬𝐭𝐚𝐧𝐝 𝐚𝐥𝐥 𝐭𝐡𝐞 𝐬𝐚𝐟𝐞𝐭𝐲 𝐚𝐧𝐝 𝐝𝐚𝐧𝐠𝐞𝐫𝐬 𝐢𝐧𝐯𝐨𝐥𝐯𝐞𝐝 𝐢𝐧 𝐰𝐞𝐥𝐝𝐢𝐧𝐠 𝐚𝐧𝐝 𝐟𝐚𝐛𝐫𝐢𝐜𝐚𝐭𝐢𝐨𝐧. 𝐔𝐧𝐝𝐞𝐫𝐬𝐭𝐚𝐧𝐝 𝐭𝐡𝐞 𝐏𝐏𝐄 𝐞𝐪𝐮𝐢𝐩𝐦𝐞𝐧𝐭 𝐧𝐞𝐞𝐝𝐞𝐝 𝐭𝐨 𝐬𝐭𝐚𝐫𝐭 𝐰𝐞𝐥𝐝𝐢𝐧𝐠 𝐬𝐚𝐟𝐞𝐥𝐲. 𝐌𝐢𝐤𝐞 𝐅𝐞𝐬𝐭𝐢𝐯𝐚 𝐝𝐨𝐞𝐬 𝐧𝐨𝐭 𝐭𝐚𝐤𝐞 𝐚𝐧𝐲 𝐫𝐞𝐬𝐩𝐨𝐧𝐬𝐢𝐛𝐢𝐥𝐢𝐭𝐲 𝐟𝐨𝐫 𝐢𝐧𝐣𝐮𝐫𝐲’𝐬 𝐜𝐫𝐞𝐚𝐭𝐞𝐝 𝐛𝐲 𝐝𝐨𝐢𝐧𝐠 𝐬𝐨. 𝐖𝐞𝐥𝐝 𝗮𝗻𝗱 𝗳𝗮𝗯𝗿𝗶𝗰𝗮𝘁𝗲 𝐚𝐭 𝐲𝐨𝐮𝐫 𝐨𝐰𝐧 𝐫𝐢𝐬𝐤. 𝗧𝗛𝗜𝗦 𝗜𝗦 𝗙𝗢𝗥 𝗘𝗡𝗧𝗘𝗥𝗧𝗔𝗜𝗡𝗠𝗘𝗡𝗧 𝗣𝗨𝗥𝗣𝗢𝗦𝗘𝗦 𝗢𝗡𝗟𝗬.

Пікірлер: 302

@Military-Museum-LP Жыл бұрын

Anyone can go fast on a motorcycle but going fast on a mini bike with little to none suspension takes guts!

@BenNawrath Жыл бұрын

On dirt!

@matthewwolfe5243 Жыл бұрын

No it takes a strong back!

@Deucealive75 Жыл бұрын

Not only guts. It appears that they have decades of riding experience.

@travisosborne7281 Жыл бұрын

Mini biking is the real Enduro test

@gavinstewart999 Жыл бұрын

On god

@jondavidmcnabb Жыл бұрын

OMG the pict insert of MJ was truly hilarious!!! You and your brother must be the local hooligans in your area 🙂

@Mikefestiva Жыл бұрын

😂 Thanks for always checking out my videos! 🙂👍

@CraigHollabaugh Жыл бұрын

Y'all never grew up, neither did I because I smiled all the way through.

@JH-ve6tx Жыл бұрын

The "Predator" engine box with Michael Jackson on it made me laugh...that was good! Love your builds and swaps. Great content.

@RickSeigmund01 Жыл бұрын

Fantastic video Mike! Man, this minis look like a lot of fun! Can't wait to see what you do with them next!

@JVScustoms Жыл бұрын

Your gonna love building up that 224. I did a full build on my 224 all billet parts and it’s a beast. Lots of torque

@steamfan7147 Жыл бұрын

Great fun machine! I've been wanting to experiment in making a "hill billet" flywheel for a 212. On some there is a rough cast step on the skirt of the stock flywheel that is machined and fitted with a ring gear on the electric start models. My idea is to take the flywheel and finish machine that step, then turn up a steel ring and shrink fit it on. I think this will work, because from what I have seen the electric start models don't have the inside out flywheel issue due to the ring gear holding everything together. Another thing I have seen with the stock flywheel is some of the "explosions" aren't due to the flywheel giving up. Instead, it's the flat head screw in the center of the impulse magnet that gives up and let's the magnet become one with the air cowl. I think doing the ring mod and replacing that screw with a flat head socket screw would be a cheap way to greatly improve the stock flywheel.

@msears101 Жыл бұрын

oh mike. love all the humor and graphics. michael jackson, mr t. your videos are informative and entertaining, and always make me smile.

@Mikefestiva Жыл бұрын

Haha 😂 thanks I really appreciate it 🙂👍

@TXH1138 Жыл бұрын

Good clip from On Any Sunday. Probably the best motorcycle movie EVER.

@joell439 Жыл бұрын

Mike - cool upgrade. Loved the "On Any Sunday" cameo insert @ 12:40 👍👍😎👍👍. Definitely one of the best movies ever. Joel......

@Mikefestiva Жыл бұрын

Thanks for checking out my new mini bike video Joel! Haha yes On Any Sunday is a classic for sure 😊👍

@drewnewcomb2909 Жыл бұрын

@@Mikefestiva I was just wondering about the hella light on your brothers mini bike. Is it wired up or just for looks? Haha looks sweet. Also was wondering what clutches and rear sprocket you guys are running? Did you end up going back to the torque converter? Is your brother still running the jackshaft or did he switch to a torque converter as well? Love these videos man, you guys have great taste in how you modified them. Your channel is amazing, new subscriber and love all your projects and cool things you make! I am into everything you guys seem to be except I can't fabricate 😂

@ExplorethePNW 6 ай бұрын

Looks like a blast! Love the customization you do to all your builds. You make it so it works best for you and how YOU want it. Not some rando on the internet. It’s why I always come back to this channel.

@justonemore9217 Жыл бұрын

I love the little video clip of the kids from on any Sunday love that documentary.

@brentboterhoek7999 Жыл бұрын

Looks like heaps of fun Mike. Can't wait to see the upgrades.

@lorenmeyer5290 Жыл бұрын

Always Loved mini bikes as a kid! Looks like you guy's are having a ball flying down your driveway!

@Buses2Bikes Жыл бұрын

The MJ/Predator reference was slick.

@panda_of_trash7806 Жыл бұрын

Loved the video Mike! Seems like you had some editing fun as well lol. Can't wait to see the upgrades!!! I was wondering how the mini bikes were holding up, glad to see you guys are still ripping around on em! Keep up the great content 👏

@brandons42472 Жыл бұрын

Excited for this Mike! I’ve missed a few videos but I’m back!

@alsouthern7190 Жыл бұрын

Mike. love your channel, always something good to watch!

@michaelkern7260 Жыл бұрын

I love those mini bikes mike! Great job on the seat mod, the bars, the led lights super sweet upgrades. You guys are having way to much fun on them. Be careful.

@shedtested27 Жыл бұрын

Thanks for sharing your experience and tips...Thinking about a mini bike for the grandson when he's a bit older.

@matthewf1979 Жыл бұрын

The Predator 224 is the way to go. Better block, crank, and the head is perfectly serviceable.

@harryballzack Жыл бұрын

I've always liked these little machines!!

@MrClickbang357 4 ай бұрын

I really like the Ruckus inspired dual LED headlights! That mod (and the perGhost!) will be on my upgrade list!!! Great video

@wesleyammon8425 Жыл бұрын

Lovin the mini bike content. I have a trailmaster mb200-2 with a built non hemi 212cc predator, and a Massimo Warrior with a built 224cc predator. I daily my trailmaster to work and my Massimo is my work in progress. Keep up the great work. Im from Oregon

@Swamp-Fox Жыл бұрын

Love the mini bike vids! I had one as a kid. This makes me want one now!

@quarlow1215 Жыл бұрын

Very cool Mike. Look like they're a lot of fun.

@jessiehughes9432 Жыл бұрын

A bunch of grown kids...I'm glad I'm not the only one..😄👍🏻👍🏻

@Mikefestiva Жыл бұрын

Haha 😂 definitely 👍 Thanks for checking out my new mini bike video!

@jessiehughes9432 Жыл бұрын

@@Mikefestiva Ride on! 👍🏼

@larrytemen4789 11 ай бұрын

Finally someone that compared the ghost with the 224

@motosmitty1543 Жыл бұрын

Love Minibikes Would love to see more. Really liked your mods

@051biohaz Жыл бұрын

Another great video man, hope you had a fun summer…with that little mini bike it looks like you did..:) I would love an update on the suzuki as mine is almost done..thanks for the upload dude

@GoodFellasMiniBikez-GFMB Жыл бұрын

hell yeah this is what i was waiting for great content

@thor777mx Жыл бұрын

I really Need to get one of these! Great vid as always

@acuraintegrar5 Жыл бұрын

Awesome vid mike!! I honestly gave to say i never gave these bikes a second look but now that i see these vids they have me thinking lol. Cant wait to see how that motor responds to the mods!

@Mikefestiva Жыл бұрын

Thanks Joe! Haha they are goofy little bikes but there’s something really fun about them. I find them to be more fun just riding around my place with friends, rather then the bigger bikes like my KTM. Of course the KTM is more powerful and far better on the trails 🙂👍

@JakeItsTheCops Жыл бұрын

Love the video Mike! They look super fun!

@WolfVane Жыл бұрын

I recognize that coastal 😁🤙 howdy neighbor! excellent content!

@motorbikemadness5773 Жыл бұрын

Great video guys! I'm going to have to pick up a Ghost 212 for motorized bike build.

@cwithaz Жыл бұрын

Loving these minibike videos man! Looking forward to getting mine in the spring

@Mikefestiva Жыл бұрын

Thanks man! 🙂👍

@user-ht4iw8yx3r Жыл бұрын

You can't deny hes your brother!!! Awesome video as always man

@jerrygoldfuss466 Жыл бұрын

Great video Mike!

@allanperryman388 Жыл бұрын

Another great video. 👍 looks fun

@relatableguy2232 Жыл бұрын

Awesome build!

@kdolmyer Жыл бұрын

That WAS a fun video, thanks!

@_autoverse Жыл бұрын

Looks like you’re having fun with these not just riding them but with the mods too. I reckon one of these bikes would be a good platform for anyone, no matter their skill level to try their hand at modding.

@Mikefestiva Жыл бұрын

They definitely are fun, yes there’s a lot of aftermarket parts available to really mod these engines 🙂👍

@blackbuttecruizr Жыл бұрын

Love your vids

@DibsRibs3279 Жыл бұрын

A really good mod to do for these coleman minibikes is getting a torque convertor. It really puts the power down!

@FlawedOffroad Жыл бұрын

Grats on 200k man! Cool video too

@Mikefestiva Жыл бұрын

Thanks man! I really appreciate it 😊Haha honestly the 200K is great and it’s cool to see the channel grow to that size but it means nothing when it comes to YT, they don’t let most of my subscribers know when I have a new video up.

@DecayWithUs Жыл бұрын

I've noticed some weird stuff with the algorithm recently. Very discouraging...

@Mikefestiva Жыл бұрын

@@DecayWithUs Yes definitely! Something has changed, I have noticed it for the past 2 or 3 months. Every new video I post seems to do worse then my previous video. You know the last ten videos KZfaq shows you in the studio app, every new video I post is at 9th or 10th place?

@DecayWithUs Жыл бұрын

It's been even weirder than that for us 😆 we don't have a schedule to keep yet so we are just sitting back until we get inspired again 🤷‍♂️

@emoya319 Жыл бұрын

This some good mini bike content my dude 👌

@Mikefestiva Жыл бұрын

Thanks Eric 🙂👍 I should have a new mini bike video up in a few weeks!

@almostsapien Жыл бұрын

Shaping that seat foam with a grinder looked like it was extremely satisfying. I wouldn't have wanted to stop! 😅

@1rustytree Жыл бұрын

Nice Mike! I had no idea they were that fast!

@westmeridian Жыл бұрын

Love your videos! I have that same model bike and lost my gas cap as well. The only thing I changed on my bike is the paint. It's now pink 😄

@Mikefestiva Жыл бұрын

Right on! They are really fun little bikes 🙂 haha besides those gas caps and stuff like that 😂

@1979augistine Жыл бұрын

Hell yes thank you for the video

@jparker785 Жыл бұрын

Wait, a cheap part of Amazon failed?! 😁 Good vid and love to see people having fun, especially family! ✌️

@Jodyrides Жыл бұрын

That’s remarkable on engines known to have Stone Age carburetors and no advance on the magneto ignition systems. These engines are generally designed to run at one specific RPM like on a generator or a lawnmower. I’ve never thought of them as something that has a wide power band

@micus09 Жыл бұрын

I just about fell over when I saw the Michael Jackson cover on the predator motor lol. You are my kinda people.

@Fortuna_716 Жыл бұрын

Cool, I wanna do my own build for riding to work in the Winters just for fun lol

@albertdehn8381 Жыл бұрын

Thanks for sharing 👍😀

@Agustin-jo8mv Жыл бұрын

You guys make those bikes look really fun. Haha

@ll.7927 Жыл бұрын

Cool stuff bro

@dukie1616 Жыл бұрын

Okay that was fun👏

@tomtruesdale6901 Жыл бұрын

I really like those little minibikes, might work well at my farm. It is my understanding that the stock cast iron flywheel on the Predator engines are a disaster waiting to happen if you remove the governor. Looking forward to seeing what you do with it

@GoTakeADrive Жыл бұрын

Mike, once again thanks for the video! Great content Any more Suzuki upgrades coming? Cheers from New Hampshire!

@marlygee722 Жыл бұрын

Great video 📹

@CODOutdoors Жыл бұрын

Great job Mike!

@Mikefestiva Жыл бұрын

Thanks man! 🙂👍

@ar15gator Жыл бұрын

Love it👏🏻💯

@90xjJe3per 11 ай бұрын

Duuuuude! I think I’m local to you.. I just started researching mini bike stuff, I have a couple of small ones and a vintage with a 212 on it. Found you and your bros videos! I’m not gonna give away our location but that’s coastal!

@readyreckoner1592 Жыл бұрын

That's decent Tiggin, young man.

@Ants_Pants Жыл бұрын

Welcome back! hey Mike thanks for the video! Its really great in the USA you can just go to harbor freight and buy stuff like small engines. Locally here in Estonia theres not much to choose from atm... like either go with a 6hp or a 6,5hp... lol only option would be to order from amazon... Retailers do stock some engines but at outrageous prices (500 for a 7hp engine......) I bought the 13hp engine for my bandsaw mill for only 300 bucks...Great video very enjoable to watch. I hope your having fun at your cabin :) Btw you reached 200k bud huge congratz from me :)

@Mikefestiva Жыл бұрын

Thanks for checking out my new video Ants! Yes the little engines are available at a great price. I just bought a Harbor Freight Predator 212cc engine on sale the other day for $139! A few years back they would go on sale for $99! The really cool thing is just how many parts are available to make these small engines put out twice there rated HP. 200K is pretty crazy 😜 now if I could get YT to start recommending my channel and videos once again to new viewers and my subscribers 😂

@gear21clothingco.75 11 ай бұрын

Great video

@technoidtype Жыл бұрын

love that frame

@Rebel-Neck Жыл бұрын

Put 196cc heads and push rods on a 212 you won't regret it. I had my 212 cranking on stock internal parts. I even made an oil cooler for it. You can plumb propane into the intake of the carburetor, then when your riding wide open throttle you can crack the propane open and gain a few more mph. The propane works as extra fuel and at full throttle the engine will get the optimal air flow to burn the extra fuel. It's poor man's nos.

@theredfirecracker3504 Жыл бұрын

Great. Now I'm gonna have to go down a rabbit hole on this channel to find out what the heck that RV truck thing is. 3/5 stars wouldn't change a thing.

@Deucealive75 Жыл бұрын

The flywheel you need for the 224 will be the same one you couldn't get for the 196. Remember? Great idea with the seat. I was looking at the same thing. I have a 78 RM250 seat I was thinking about using on my Coleman. Also. It won't take a lot to get the 224 to keep up with or beat the Ghost.

@user-pc9hi7re1n 8 ай бұрын

Did that today went on a modded mini bike of a Colman tools some guts I did not have but turned out to be more fun 🎉

@chrisg6473 Жыл бұрын

It would be cool to see a rear suspension upgrade. Would work good with that stellar new seat.

@Dantheminibikeman66 Жыл бұрын

Looks like fun

@kochegar2005 Жыл бұрын

Из России с любовью! Самодельщики всех стран обьеденяйтесь! ) Лайк!

@TheGraytOutdoors Жыл бұрын

I recently (yesterday) took the stock 196cc off my CT200U and putting on a standard Predator 212. It’s amazing how much alike the two are visually (aside from the side case bolt sizes) but they definitely aren’t similar in performance in my opinion. Even though we joke about Harbor Freight and their products, the Predator engines always seem to be dependable, smoother, and definitely better built then what Coleman is using.. I’m building my CT200U as an actual piece of usable equipment for my fishing channel so there won’t be a lot of performance mods, more more necessity than fun I guess you’d say… next I need a suspension for the front!!😳 and maybe a Springer style seat. Great video Mike, you guys are some mini bike riding monsters… Willie

@Schmmoo Жыл бұрын

Hey what’s the speed difference from the 196 to the 212

@TheGraytOutdoors Жыл бұрын

@@Schmmoo Actually, top speed is the same just because of the gearing. I didn’t change the gearing at all but I can say, the idle is definitely quieter and smoother. Accelerating is a lot less “jolty”. Definitely a smoother experience, so getting to that top speed is a lot nicer and quicker. I would say it’s 0 to 20mph time is better.

@davegt27 Жыл бұрын

70"s banana seat that is my era lol I had a Screamer bike

@adrockey Жыл бұрын

Great video! Just odd seeing somebody pull wheelies on a mini bike. Of course you have to modify the performance... You got beat by your brother. Lol

@mehmetucar3685 Жыл бұрын

Super video my brother ❤😊

@Mikefestiva Жыл бұрын

Thanks!😊

@austintorvund1 Жыл бұрын

Hey Mike quick question, my bt200x rattles and shakes at high speed and my arms and body turn to jelly. Made sure bolts were tight but maybe the guy who put it together didn't align something? Do you know where I can find rubber bushings to help vibration for the motor plate? Idk

@kristoferkalinauskas5800 6 ай бұрын

I need more people to like/view this video

@marcelosousa9899 Жыл бұрын

muito top...very good for bikes. im from BRAZIL

@DougsMessyGarage Жыл бұрын

Hey Mike, I have a build series on my channel with the Mega Moto 212 from Go Powersports running the Predator 224. I agree completely that the 224 has great torque. I'm hoping to install some minor hop-ups on an upcoming video too. Bone stock, I am getting 39 mph. I don't expect much more speed till I get rid of the governor but it will be interesting to see what improvements I can make in torque with a few inexpensive parts.

@JulianGuevaraphoto Жыл бұрын

I just swaped my c200 engine for the predator 212. I noticed I wasnt able to use my h headlight. Have you. Figured out how to wire up the headlight with the predator 212 or 224? Love the video! Stoked to see the next one

@09FLTRMM77 Жыл бұрын

MM77 Approved 👍🏼👍🏼

@roypatterson9910 Жыл бұрын

I have a Coleman CT200U-EX, I bought a Tillotson 225cc Performance Engine from GoPowerSports, and I tell you what, it's a big difference between only going 19 mph to now going 59 mph. I could get it to go a little faster by changing the sprockets, which I haven't done yet, I've just left it like it is, because 59 mph is pretty good. I bought the engine last summer and it's a very reliable engine, plus it's beefed up to make the engine stronger. It puts out 18.626 hp, according to the dyno sheet they sent with the engine. You should get one of these engines, but they're not cheap!

@Deucealive75 Жыл бұрын

59 mph on stock Coleman gearing? Wow. Sounds like a 10K+ RPM screamer.

@OlympicOverland Жыл бұрын

Those Tillotson motors are monsters! The 225RS would be sweet 👌

@roypatterson9910 Жыл бұрын

@@OlympicOverland Yeah, I think the one I bought was the most expensive one. Then I had them replace the 22mm knock off Mikuni carburetor and put a 24mm flat-side Mikuni carburetor, which boosted the power up a little from what it would have been. They are strong and reliable engines, I highly recommend them to anyone!

@roypatterson9910 Жыл бұрын

@@Deucealive75 Yeah, but I removed the jackshaft and put on a Torque converter with the juggernaut. The rear sprocket is a 54 tooth I believe, it was what came stock on it, but yeah, it definitely rips! I should post a video on my KZfaq channel so everyone can see it.

@OlympicOverland Жыл бұрын

@@roypatterson9910 that’s awesome! I will look into one of the flat slides. I already have the 225RS intake manifold and like how it is tucked in versus hanging out to the side.

@liamdoolin9165 Жыл бұрын

sick ass wheelies!

@Mikefestiva Жыл бұрын

Thanks 👍🙂

@mikebrady4389 Жыл бұрын

I have the same orange BT200X. May I ask what color orange spray paint you used? Mine came a bit dinged up from the factory and I’ve had zero luck getting a paint code from Coleman. Thanks!

@blueschild61 Жыл бұрын

I really enjoy these mini bike videos. I'm glad you're having so much fun with them. But, as for me, I'll stick with the tw200. Still VERY cheap, and you can't put a price on reliability. Maybe you could do a comparison video? Cheers. See you out there.

@Mikefestiva Жыл бұрын

Those TW200 are fun bikes, my brother and I have owned a few of them in the past. We have taken them on lots of long camping trips 👍

@cb88m10 10 ай бұрын

What paint did you use to touch the frame up after you put the brackets? I am doing something similar to my orange bike as well

@user-yl7hg9gv3x 7 ай бұрын

What watt are those lights and how do you have them hooked up

@Justforfun-ek7et Жыл бұрын

Are y’all twins? Love those little motorcycles.

@dr.dalecooper9673 Жыл бұрын

I did the 224 swap, but Wondering how u guys rewired your headlights after the 224 swap.

@goingbonzo5923 Жыл бұрын

Them are really great mods you did. I should of bought one of those when they were cheap. Those Colemans are up to 900 bucks now. Also, can you recommend a decent tube bender?

@ricco8733 Жыл бұрын

Is that your boy riding with you and your bro? Now I get it. Good times!

@frenchokie Жыл бұрын

So what do you works better clutch or torque converter? I’ve heard belt failures are a problem I have a old kdx200 I was thinking about putting a predator 212 in your xr looks fun

@cb88m10 11 ай бұрын

Nice build, love the seat. Where did you get the paint for the bike? What color ?